How can I unlock cid to flash different rom version?
I have some working SDA2, but only white screen, nothing on display. Somebody "played" with this phone. I would like to flash it and normalize "white display".
thanks
Foony
you have white screen because someone was upgrade wrong rom.
bootloader start? hold camera button and press power button
I have white screen too. And bootloader doesnt work. I presume its dameged. Now what? HELP please. I need a guide to reflash the chip inside the phone.
Related
Hello guys,
after looking here a lot for improving my x10 (successfully, I love fxp ), I have my first problem, and it is a strange one.
I live in France, and a new carrier made very cool prices, so I decided to change carrier. But my previous carrier provider made its possible to not unsimlock my x10, so, when I went in holidays in Tunisia, I went to a shop where they are known to unlock phones, and they unsimlocked it, but they put an official 2.1 rom, but I couldn't go from cyanogen to stock 2.1... So I decided to install fxp.
I rooted the phone with flashtool, and tried to flash the phone, but it was stuck on se logo, so I used pc companion to install stock gingerbread, it installed. But when I power it on, it's not 2.3, it's still 2.1 ! I don't know what these tunisian did, but they ****ed up my phone T_T
when I start it with my sim, I can enter my pin code, and I only have the blue wallpaper of 2.1 and the top bar. I can't access to anything, the three buttons do not work (except when I put the usb cable, I can use the return button to quit the "charge or connect" menu and minimize the bar when it is fullscreen).
When I don't put the sim, I have the configuration menu, but when I press proceed, it says me to insert a sim card and reset, I can't do anything at this state.
Did anyone have the problem ?
celuiquichaussedu48 said:
Hello guys,
after looking here a lot for improving my x10 (successfully, I love fxp ), I have my first problem, and it is a strange one.
I live in France, and a new carrier made very cool prices, so I decided to change carrier. But my previous carrier provider made its possible to not unsimlock my x10, so, when I went in holidays in Tunisia, I went to a shop where they are known to unlock phones, and they unsimlocked it, but they put an official 2.1 rom, but I couldn't go from cyanogen to stock 2.1... So I decided to install fxp.
I rooted the phone with flashtool, and tried to flash the phone, but it was stuck on se logo, so I used pc companion to install stock gingerbread, it installed. But when I power it on, it's not 2.3, it's still 2.1 ! I don't know what these tunisian did, but they ****ed up my phone T_T
when I start it with my sim, I can enter my pin code, and I only have the blue wallpaper of 2.1 and the top bar. I can't access to anything, the three buttons do not work (except when I put the usb cable, I can use the return button to quit the "charge or connect" menu and minimize the bar when it is fullscreen).
When I don't put the sim, I have the configuration menu, but when I press proceed, it says me to insert a sim card and reset, I can't do anything at this state.
Did anyone have the problem ?
Click to expand...
Click to collapse
If those Tunisians know something, they are probably here on xda-developers forum ..
You have a thread for sim unlocking, and I think that there is a way to check if your phone is unlocked properly via s1tool or is it possible to unlock it..Go HERE
Thanks, for the simlock soft.
But how can I make it to boot properly (ie having acces to menus, icons and all)
Well, I tried s1tool, and it says that it is still locked, but I don't understand, I was able before trying the update to call with the new carrier oO
PS : is there a way to root/flash without enabling debugging ?
I do not know if I can post this, but I managed to do here.
Debranding a knife around 1.6 android and use the ITS to upgrade
http://www.portalandroid.org/comunidade/viewtopic.php?f=55&t=5399
celuiquichaussedu48 said:
Well, I tried s1tool, and it says that it is still locked, but I don't understand, I was able before trying the update to call with the new carrier oO
PS : is there a way to root/flash without enabling debugging ?
Click to expand...
Click to collapse
Well, HERE you can find everything you want for unlocking, downgrading, rooting..(a lot of links)..
Just take it easy and don't rush..It's a simple process, you just have to understand and follow everything they say..
Cheers
Well, I tried again to backup the stock rom with pc copanion, and it worked, and now it is unsimlocked xD
hey,
after some tries to unlock my 'x-Ray' (ST18i) I got a real problem:
there is no green LED while loading the batterie,
and I cannot start it.
Pushing the power button does nothing, holding it gives me a very short, green blinking light, once a second.
Somtiimes it gives me an additional vibration, but nothing more.
SEUS finds an update and unstalls it but that doesn't change anything.
Did I really knock it out or is there a chance to use it again?
Someone there with ideas -or even help?
chorknabe
chorknabe1 said:
hey,
after some tries to unlock my 'x-Ray' (ST18i) I got a real problem:
there is no green LED while loading the batterie,
and I cannot start it.
Pushing the power button does nothing, holding it gives me a very short, green blinking light, once a second.
Somtiimes it gives me an additional vibration, but nothing more.
SEUS finds an update and unstalls it but that doesn't change anything.
Did I really knock it out or is there a chance to use it again?
Someone there with ideas -or even help?
chorknabe
Click to expand...
Click to collapse
What means unlocking? Bootloader unlocking or what?
you propably deleted BOOTLOADER... contact nearest sony service
Hi,
thanks for finding this:
http://forum.xda-developers.com/showthread.php?t=1126358
now it is much better. ray works again...
chorknabe1 :victory:
mihahn said:
What means unlocking? Bootloader unlocking or what?
Click to expand...
Click to collapse
ahmm, sorry mihan,
didn't see your question:
I'm still trying to SIMunlock that x-ray.
any idea?
ciao
chorknabe1
chorknabe1 said:
ahmm, sorry mihan,
didn't see your question:
I'm still trying to SIMunlock that x-ray.
any idea?
ciao
chorknabe1
Click to expand...
Click to collapse
Have you tried Wotan Server, or your local Service Center/Provider?
mihahn said:
Have you tried Wotan Server, or your local Service Center/Provider?
Click to expand...
Click to collapse
SIM-locked by o2 Scotland -- phone and I live in Germany. :crying:
I tried fastgsm, result: no SIM is detected.
quote 'wotanserver.com':
Make sure you understand the difference between Debranding and Unlocking process. Debranding can help you remove network customized logo, themes, settings and applications from your phone and replace it with default Sony Ericsson ones.
Beside unlocking removes Invalid SIM Card or SIM network unlock PIN screens and allows you to use your phone with different network SIM card – unlocking is NOT supported by WotanClient software!
so that I don't think it could work.
Do I think wrong? Should I try ?
chorknabe1
Sorry, there is no difference between fastgsms and wotans X Unlocker Tool
Hi.
I have HTC Desire V with total black screen, but touch working well.
It totally stock phone with no USB debugging and else.
I want to use it as wifi webcamera. can somebody help to do that?
i tried to unlock bootloader and think it done - there at most right spot where some lines visible and i saw, like in manual (how to unlock bootloader) confirmation about unlocking bootloader after adb work, so bootloader is unlocked. what else i can do? i tried to enable usb debugging through adb, but it says "error: remote not allowed". think there s-on active, but cant make it offline - it not allowing me to flash new recovery. thanks for any help. i read a lot here on xda about similar problems, but nothing found that help me. thanks again!
No help indeed...
Looks like all much more complicated.....
Daer Forum.
I have managed to get to the "LOCK THE BOOTLOEADER" part of locking my bootloader.
But then i rememberd that my volume button dont work...
What to do now?
I have a oneplus 6t
Avoid and pass by a fool and a madman
I guess we have to somehow unlock the bootloader again! when I switch slot and reboot the bootloader it says locked on Android 10 slot, and unlocked on Android 9 slot.
I tried :
Code:
fastboot oem bs_unlock
Code:
fastboot oem unlock
Neither worked I also tried MI unlock tool but it still can't unlock it. The only way was to reboot the bootloader into Android 9 slot then flash the patched boot.img but the phone won't load the OS it just keep rebooting very fast. (this is also happens when tring to flash stock boot which I pulled using TWRP)
I had to hold both volume keys buttons + power while connect it to the PC "USB. must be connected" and when it reboot into black screen then I hold volume down key + power for around 60 seconds to boot into bootloader again.
I will try again tomorrow with different approach.
Avoid and pass by a fool and a madman
wga0 said:
Yes.. MIUI has completely different unlock management from JoyUI. I didn't try it yet, but if JoyUI11 goes to perfect same unlock management of MIUI, I guess we need to sign in MI account, submit unlock request, waiting 360 or 720 hours, then we could receive the unlock key/permission. I didn't think they change it that much.... they could change the dm-verify or something else also... but, if they didn't change it so much, I guess we maybe can use the unlock key in Android 9 bootloader. (Certain MiUI devices have no key to unlock the bootloader even if we know the unlock command...)
I believe you will find the way. Good luck...
Click to expand...
Click to collapse
I tried using MUI but it doesn't work yet, maybe it future, but surely they changed the way of unlocking the bootloader, maybe they want to make it simpler so they can use MIUI unlock tool or maybe they want to make it harder since the unlocking code is available online :silly:.
I also tried to root it using Magisk manager while on Android 9 slot, but that didn't work either.
Other things to note, after updating to JoyUI 11 the phone takes significantly more time to boot, also you need to factory reset your phone to be able to boot it. Moreover, don't like the feel of the UI, the OS feel heavy and strangely some stock apps have ads in it. On top of all that, it is very difficult to root it right now if even possible at the moment.
Therefore, I don't recommend anyone to upgrade to Joy UI 11, and wait for further updates.
To anyone needs to downgrade Black Shark 2 Pro go to the bottom of the first post.
Thanks @wga0, I will let you know if I find anything new.
thank u so much im take maybe 1 month about this comm thx
wga0 said:
Avoid and pass by a fool and a mthank u so much im take maybe 1 month about this comm thxadman
Click to expand...
Click to collapse
thank u so much im take maybe 1 month about this comm thx