you put wrong pictures.
c550 picture is c500
and c500 picture is qtek 8600 spv ??
what you talking about? you have mean pictures in general menu? if yes, everythink is correct.
Related
Hi
I have one question may be its foolish to ask
Is it true that upgrading Qtek 1010 to WM 2003 will crush the main board cause am thinking in upgrading my ppc to WM 2003
what do u Suggest
Thanx
You think??!!
so far its been 6 month now and i upgraded my Qtek 1010 for 3 times and its running smoothly...
so again you think?
go ahead do it but please make sure you know what your doing...
:wink:
Thanx for answering me and encourgin me
actually i posted my Qtek Device Info on another post and somebody kindly told me that i have already wm2003
my device info
ROM Version:4.00.16 Eng
ROM Date : 07/10/03
Redio Version : 4.21.00
Protocol Version: 32S54
so Mr.ARZLEB do u suggest anything for making this qtek arabic enabled thanx alot
Qtek and crushed motherboards
The only way you'll crush your Qtek upgrading from Pocket PC 2002 to Windows Mobile aka Pocket PC 2003 is if you physically sit onto of the device while the upgrade is being processed. If you believe this, boy do I have some very cheap igloos in Alaska for you to buy!
raycarroll70
The only way you'll crush your Qtek upgrading from Pocket PC 2002 to Windows Mobile aka Pocket PC 2003 is if you physically sit onto of the device while the upgrade is being processed. If you believe this, boy do I have some very cheap igloos in Alaska for you to buy!
Click to expand...
Click to collapse
Hey man go easy on the new joiner with 4 posts... Any hot igloos for me?
Falconsql
so Mr.ARZLEB do u suggest anything for making this qtek arabic enabled thanx alot
Click to expand...
Click to collapse
Yes from the info you have posted you do have WM 2003. As for Arabic support you will find all the anwsers here:
http://forum.xda-developers.com/viewtopic.php?t=1861
http://www.pocketpc4arab.com
Enjoy
Thanx ARZLEB
Sorry for asking much
but the www.pocketpc4arab.com is not working with me is it with u
then the post u put contains beta arabization do u suggest me to use it and when i back up my rom on a MMc card can i use this card for another programs or i should leave it as a back up only
thanx
Falconsql
www.pocketpc4arab.com Seems down try this one:
http://www.ppcme.com
Actually i don't suggest to use Arabic in general this is my opinion as what to do its your decision.
As for the MMC i suggest when you back up your ROM it not to use it for any other thing even if you try the MMC would require format to be able to write on it anything else so that mean you will loose all the Backup data.
If you need anything else just keep asking till you get all the anwsers...
regards
Thanx Alot ARZLEB
first thanx alot i dont know if u r in lebanon now but if not i was in beirut before a couple of days ,it was great there
however i have a question
first foolishly i changed the clock in the upper bar from digital look into analog look like the watch on the wall how to make it again digital
then how to make the time apperas in 12h format on the today screen and not 24h i tried time setting in regional setting and i tried all the formats but nothing happened
thanx
first thanx alot i dont know if u r in lebanon now but if not i was in beirut before a couple of days ,it was great there
Click to expand...
Click to collapse
Your welcome anytime and yes i am in Lebanon now near the area we call DT (Down Town).
however i have a question
first foolishly i changed the clock in the upper bar from digital look into analog look like the watch on the wall how to make it again digital
Click to expand...
Click to collapse
Check the settings / clocks or setting / Regional Manager.
then how to make the time appears in 12h format on the today screen and not 24h i tried time setting in regional setting and i tried all the formats but nothing happened
thanx
Click to expand...
Click to collapse
Go to Settings then Regional settings and there change the English to English USA or English Australia.
Thanx ARZLEB
but the problem hasnt fixed
i still have the analog clock in the blue upper bad ,i want it to be digital as before if u have it digital just point on it and chose analog clock and u will not find any way to make digital agiain try that then i failed in makin my time format 12h
then do u have in lebanon Qtek1010 accessories
am looking for stylus
headset stero if u know prices would be good
thanx
HELLO!
The camera on my spv m2000, stoped working, does anybody know how can it be replaced. :shock:
Help!!!!!!
Hi ppl, have external GPS for Wallaby which cable connects to the port on the bottom of the wallaby, since Im considering the buying of the Qtek S100 maybe someone know is the connector on the bottom compatible so I can use GPS on S100 too ?
Tnx !
Looks bad.
As much as i know, the S100 has just USB-Interface, and not serial as the Wallaby. Only Bluetooth GPS-Receivers will work....
Stefan
My hands was faster than brain, later I ve checked connectors and found same thing you told Stefan, sorry !
Anyway that S100 has gone before I layed my hands on it (already sold) so now I have offer for 2020. Checked pictures, connector looks the same as in 1010.
Same question, does anyone know are they compatible, intend to use GPS and travel charger from 1010 on 2020...
Thanks and sorry for bothering guys ! BR !
No problem.....
And yes, you´re right Wallaby and Himalaya has the same connector. So they are compatible and you can use your GPS with it.....
Stefan
Thank you Stefan, you are an (blue) angel
Best !
hiya,
bit new to all this, so some advice from you guys is needed!
what are the best options for the m1000?
not sure if there are different versions of the phone so give you as much detail as i can find?
cpu intel pxa263
speed 400mhz
ram 128mb
model ph10a
the main app i need is excel, plus a prog to print via ir to my dj450 printer(have been using printpocketce)
hope i have not missed anything important??
thanks in advance
there are 2003SE roms wm5 roms wm6 early roms
personaly if your device works as it should now i prob would leave it alone as i cant say if printing would work with later roms
thanks for the reply!
cant say its been working well?...had a few random hangs from time to time and there has been times where you get a call no ringtone heard and no way to answer it? h/ware buttons didnt work,touch screen button flashes like its been pressed but still didnt answer
only way i found to sort it out was a soft reset
so the main reason for the upgrade was an improvement in phone function rather than a printing issue?
think the main question i meant to ask really was which is the most stable version for this type of phone,most of the bugs sorted out?
thanks again
upgrading time got error in spv m1000 help please
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
voltesep said:
thanks for the reply!
cant say its been working well?...had a few random hangs from time to time and there has been times where you get a call no ringtone heard and no way to answer it? h/ware buttons didnt work,touch screen button flashes like its been pressed but still didnt answer
Click to expand...
Click to collapse
Had a lot of hanging, on my M1000, but after upgrading to the WM2003SE WWE, the speed of the machine has improved a lot, and it does no longer hang, allmost no matter what I do.
I found that some of the build in Orange apps were the reason for "hangtime" and slowdowns, because if I tryed to install them, from the original Ext-ROM, all the problems came back.
So my experience is, that "Genuine English WM2003 SE " http://forum.xda-developers.com/showthread.php?t=230279 is a major improvement, to the Orange standard WM2003
I upgraded my SPV M1000 from Orange ROM to WM5 and now to Tofclock WM6 ROM, and it works fine. All features are ok for me, it's great!!!
thanks for the reply guys
would like to try tofclock wm6, if im going to do it may as well go the whole hog!
does anyone know if you can print via ir in office on wm6?...or am i going to need some more software??
I used to have a prophet. I tend to buy a 8525. I am searching hole hermes topics. I have I few questions.
First Question: Any G3 G4 like wizard and prophet?
Second: Do all mainboards herm100 herm200 are the same and only differences is out the key layout?
thirdly: All/ANY rom are suitable for 8525 on this pages?
Is it easy to cook a rom? For example I take a rom and dump it and take out second camera, voip feautures and flash 8525?
last: it is the same question as my second question. 8525 mainboard has a empty socket for second camera or it is different and has no circut and socket for it. If we find camera and plug it and of coarse cover it with and open window faceplate, do we have a common hermes?