I have updated my phone x01ht WM5 to custom WM6 firmware,
before installing the wm6, i had install the Hard_SPL-V7
i wanna know, if i want to flash again to other wm5 roms, how could i do?
because when i was trying to flash the wm5 dopod rom (it loads the loader) but stop flashing, error said USB connection failed..
any advise pls reply, thanks... i am very noob at this level
Follow THIS guide. You will be able to downgrade to WM5 again but it is not as simple as running the RUU.
(pof im adding the warning dont worry)
Related
Hi,
If I load HardSPL onto my Touch Dual, and I want to load a ROM - will I need to go through the SPL (soft/hard) process each time I want to try a ROM or if I load HardSPL once, that's all done and and I never need to do it again?
Thanks
yes,, HardSPL mean you never need to install another SPL again to keep flashing ROMs
Thanks for your help!
hey,
im following tis forum for a while now and read about flashing roms and using hardspl and such, but i dont get it. i dont know which step to take first, which rom is best to download. i really like the s600 display driver to be in the rom. because that will make my mobile alot faster
can somebody explain to me how to flash my touch dual?
got wm6.0 ATM
btw im dutch, so if anyone dutch can help me (msn maybe? )
thank you very much!
PhoenixNLx
First backup anything you like to keep. Installing HardSPL will erase all data
Install HardSPL:
http://forum.xda-developers.com/showthread.php?t=355730
to install HardSPL you need to download:
SSPL 1,16
http://forum.xda-developers.com/attachment.php?attachmentid=63902&d=1199210757
HardSPL 1,15
http://forum.xda-developers.com/attachment.php?attachmentid=73353&d=1204286404
and Flash-uspl-niki
http://forum.xda-developers.com/attachment.php?attachmentid=63944&d=1199227284
and then just follow step 1-9 (skip 7)
when this is done, it will enable you to flash any rom of your choise
After flashing my charmer with wm 6.1 it was stuck at the Boot Screen and my phone no longer made a hard reset as it give formatting failed error.
Then i went to download an official WM5 rom from Tmobile, then I went into bootloader and successfully flash the official ROm. But again format error
Now it just shows
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
I tried the prophet ROM flashing as advised somewhere else but it failed at 95% giving me invalid nbh error
In the past I had successfully solved the problem by flashing the prophet ROM but this time .......
Any complete help or specially cooked Prophet ROM for this type of recovery...
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
rmagyar said:
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
Click to expand...
Click to collapse
But this is for recovery puposes as described somewhere else
Nobody seems to be interested to take pains in solving my problems
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
ChrBeck said:
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
Click to expand...
Click to collapse
Thanks Mr ChrBeck!!!
But I think that some way of downgrading the the SPL to 2.?? from the current 3.08 would allow me to install the PROPHET ROM for recovery and then it would be possible for me to upgrade to orignal WM5 ROM and then upgrade to your lovely ROM that I had before your latest upgrade.
Am I right or if not then can you give me the necessary files and instructions for the sd card recovery method.
Please help me as no one in my locality knows much about CHARMER and simply unable to help me in this aspect.
Thanks again.
Dr.Zia ur Rehman
I'll try to help you. In the Wizard forum there is a sticky whitch tells how to do the SDrecovery. Just search it. With the SD Card you can just fully flash a ROM. You can't downgrade anything because downgrades are looked.
If I'll find the sticky this evening I can post the link here.
Cant there be some kind of HARD SPL for this ..... charmer that would allow me to flash the prophet ROM fully. In this way I had recovered my CHARMER but I think that at that time it had lower version of IPL or SPL so the full PROPHET ROM was sucessfully installed and I was able to hard reset and flash the orignal T-Mobile ROM that I think upgraded my SPL too!!!
There is no hardSPL. Noone ever designed one. And if the Prophet trick doesn't work you can try it with a G3 Wizard ROM too. But if that doesn't help to search for the SDUpdate!
To do an SD update you must have a ROM dump on SD card from bootloader.
Method can be found here. Section 8. OS, GSM Image Reflash Procedure
Thanks for finding it for us. There was a time I read this manual completely but I don't know much of it anylonger.
Charmer needs to be CID unlocked to perform SD card flashing.
I agree. I just forgot to mention this.
Then forget it. You can't CID unlock a 2.x or 3.x. So this method is out.
How can I confirm that my charmer is CDI unlocked???
Any if this is the case then what to do with my poor CHARMER....
ANY HOPES OF ITS RECOVERY in some other manner???
Also can you post link to the wizard ROM you mentioned in your post for recovery ???
THANKS IN ANTICIPATION !!!
Well, you have a boatloader over 1.x right? If so your device can't be unlocked. But you can try to flash any WM5 ROM for Wizard. But be sure it is jast the ROM. No phone or bootloader in it.
Maybe that works.
Would you be kind enough to post a link to the proposed ROM to which I can give a try?
Is this would be possible to flash any specialiy cooked Prophet ROM only with OS as the complete Prophet ROM (with no ID RUU)gives me error at 95%.
Further isn't there a way to downgrade my spl that would allow me to flash prophet ROM that confirmly worked for me in the past.
Please help i am in great trouble.......
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
I did try flashing the room
I did try flashing the room with "Athena_SPL1.2_WM6.1_R0-CleanEdition_MiChY" but I got this message ERROR [270] : update error.
another error
This is another error, Please see the attaches image. whem i'm trying to flash it with another room.
ahmadkaram said:
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
Click to expand...
Click to collapse
Sorry to hear this.
You should have read a bit more first as you would have realised that you can't flash a radio without unlocking.
Using the unlocker would have changed the SPL to 1.2 and allowed you to flash the radio.
Have you tried doing a hard reset first?
You can only flash the original branded ROM for your machine now if you can find it.
Have a look in the wiki for original shipped roms.
I have a feeling the SPL1.07 was a dutch or german ROM that is very hard to find.
Good luck
Regards Lakeman
I currently have a MIUI android ROM installed but want to go back to WinMo 6.5 (stock). Now when i try to flash the ROM like i did before, its says on my PC USB Init failed, connection problem. The bootloader screen does say usb. Also when I try to flash trough the MAGLDR flash modus there is USB standing but i cant flash. I've also tried flashing the stock ROM from my SD card as an NBH file but it wont work.. Also repartitioning and all the stuff dont work because they all have te connection problem. I have tried multiple USB cables. Anyone know a solution??
you say that the SD flash doesn't work, can you elaborate a bit more?
explain everything you did, what ROM did you try, if you can give me the whole step by step you tried to SD card flash, including and file name changes etc
SD flash is usually the last resort and if you tried it with a genuine original Stock ROM it should work, albeit it will change the RADIO, SPL and ROM at the same time...
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
cmour said:
Hello,
I intend to downgrade my hd2 Europe version, from Android with Magldr, to stock Rom,
because of some bootloops i encounter after trying install wp7, so i want to start from scratch and try flashing wp7 or Android again!
I have HSPL 2.08 and i want to flash a Greek Stock Rom
(RUU_Leo_S_HTC_ELL_3.14.482.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
OR
(HTC HD2-RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2).
My radio is 2.15.50.14.
So far i have made some research and i understand that:
1st. i must flash a stock Rom from SD.
2nd. The hspl will be replaced with stock SPL. Do i need to flash HSPL 3.03, as 3.14 ROMs on HTC HD2 Eu require SPL 3.03.0000 or HSPL 3.03, before flashing stock Rom from SD? What about 1.66 Rom?
The stock SPL version depends from the Rom which i would choose, or will be the same?
after that I just need to run HSPL4, install HSPL2.08 and continue with Magldr as i have done in the past?
Is there something I should be extremely careful so as not I have a fatal problem?
Thanks in advance everyone who will help a confused man!!!
(i don't wanted to start a new thread, so i posted here because of the title)
Click to expand...
Click to collapse
just follow the guide on the relevant ROM that your interested in
but if your playing with WP then use HSPL 2.08
if your flashing a stock ROM via SD as you pointed out it will replace the SLP with the one that comes with that ROM, so it doesn't matter what you do, then you can use HSPL4 to install the required version for the ROM that you want to use. You can use HSPL 4 to revert back to a stock SPL as well, but if you have any doubt at all then just re flash a original stock ROM, you cant go wrong at all then
Well, if i try to flash anything from my pc it says connection error. When I use flasher modus the HD2 freezes and i need to pull out the battery. I also tried flashing the stock ROM from my SD card but that also doesnt work. I use MAGLDR 1.13 and HSPL 2.08 i think. The current ROM is MyMIUI V11.
i managed to install the stock rom but now i cannot install magldr. When i start the installation the hd2 shows bootloader, then goes into the installation screen but after 1 second it flashes back to bootloader.. any help?
are you putting the phone in to the tri coloured bootloader with the word "serial" at the bottom? plug in to a USB port and the word changes to "USB" then install MAGLDR?
just so im clear what you have tried