I am sorry to open a new thread. I need help for my softbank x01ht. I have sim and cid unlock my phone with simunlock3.0 by pof. but I randomly meet a whitescreen. so I go the local shop in japan for repair. They said i had change my phone ROM，so lost warrant. I restore the original rom with the shipped rom file by softbank. BUT SITUATION is MORE BAD now. all the front key is out of work. I check my phone by mtty , use command as: task 32 , info 8 , task 2a... the message show that, there 4 bad blocks. and those command fix 3 of them. still , bad block 322 (0x142) can not be fixed? My question is how to fixed it ? btw. now still whitescreen, out of front function key.
zaipingx said:
I am sorry to open a new thread. I need help for my softbank x01ht. I have sim and cid unlock my phone with simunlock3.0 by pof. but I randomly meet a whitescreen. so I go the local shop in japan for repair. They said i had change my phone ROM，so lost warrant. I restore the original rom with the shipped rom file by softbank. BUT SITUATION is MORE BAD now. all the front key is out of work. I check my phone by mtty , use command as: task 32 , info 8 , task 2a... the message show that, there 4 bad blocks. and those command fix 3 of them. still , bad block 322 (0x142) can not be fixed? My question is how to fixed it ? btw. now still whitescreen, out of front function key.
Click to expand...
Click to collapse
Read this HardSPL sticky thread that has "Fix bad Blocks" in its title.
todd_jg said:
Read this HardSPL sticky thread that has "Fix bad Blocks" in its title.
Click to expand...
Click to collapse
yes , you are right. I has noticed this poste . but , when download it and install , I fail to do upgrade the SPL. I guess , due to position of bad block, it is in first (the bootload )partition. I am look forward for more help. Thank you for help and idea.
my softbank x01ht information is show as follow:
USB>task 32
Level = 0
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x142(322) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1BB00
Partition[3], type=0x4, start=0x1EB00, total=0x1BD00
CE Total Length(with sector info) = 0x3E55800
CE CheckSum Length(without sector info) = 0x3D60000
USB>task 2a
Check block : 322 - Bad
You simply have a bad block. That's it.
You can't fix something that's actually broken.
so , the question is gonna to , how to avoid to store data in this block? how to marked this bad block? and reinstall the first partition(bootloader?)? any more idea?
thank you!
zaipingx said:
so , the question is gonna to , how to avoid to store data in this block? how to marked this bad block? and reinstall the first partition(bootloader?)? any more idea?
thank you!
Click to expand...
Click to collapse
i am interrested in any answer for this question.
i am in the same situation with my Trinity except i have 2 bad blocks !
please help
Related
Hello,
My HTC blocked on the white screen where htc is written.
I do a soft or a hard reset it doen't go after the logo screen...
info 8 :
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1E7(487) is BAD block !!!
Block 0x1EA(490) is BAD block !!!
Block 0x1F3(499) is BAD block !!!
Block 0x207(519) is BAD block !!!
Block 0x209(521) is BAD block !!!
Block 0x21C(540) is BAD block !!!
Block 0x22A(554) is BAD block !!!
Block 0x22C(556) is BAD block !!!
Block 0x381(897) is BAD block !!!
Block 0x387(903) is BAD block !!!
Block 0x389(905) is BAD block !!!
Block 0x390(912) is BAD block !!!
Block 0x391(913) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19800
Partition[3], type=0x4, start=0x1C800, total=0x1E000
CE Total Length(with sector info) = 0x39E4000
CE CheckSum Length(without sector info) = 0x3900000
What are those BAD block ???
USB>checkimage
IPL CRC checksum = 0xB11BA471
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0xC0E1751A
ExtROM CRC checksum = 0x4F9844B0
Radio Image CRC checksum = 0x724875C8
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
Somebody can help me ???
Have you tried flashing HERMIMG.nbh from SD Card?
Instructions here, let me know if you need more help:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hi pof,
In bootloader I don't see this menu you mentionned on the link but only the three colors (red, green and blue)...
What am I doing wrong ?
Regards,
Giuseppe
Try formating the miniSD card in FAT32, if it doesn't work try in FAT16.
It works for the FAT32.
It say upgrade completed but when I reset it still stay blocked on the white htc screen...
Any other advices ?
Regards
Bootloader command "task 28" formats NAND flash (Storage). I don't know if the bad blocks you have are in NAND or not, but you may give it a try... output should be something like this:
Code:
USB> task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 462
Storage Total block: 474
Total Bad Block in CE: 0
NeedToEraseBlockStart: 475
Storage format success
Hi had the exact same problem about an hour ago. All I did was a hard reset and my phone came back to life, luckily every night my phone is synced with my pc so I had all my contacts and calender etc for messages.
help me??????????
i can't down grade bootloader 1.09 to 1.04.(error:262)
USB>task 32
Level = FF
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a S024
Device Name: H, Bootloader Version : 1.09
Built at: Nov 7 2006 22:59:17
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1B600
Partition[3], type=0x4, start=0x1E600, total=0x1C200
CE Total Length(with sector info) = 0x3DB3000
CE CheckSum Length(without sector info) = 0x3CC0000
USB>checkimage
IPL CRC checksum = 0x59C1EC20
SPL CRC checksum = 0x91BDD7D5
CE CRC checksum = 0xB5F30AD6
ExtROM CRC checksum = 0xDBC1AB54
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
My device is x01ht help me ????????????
welcome to the growing population of bricked TyTns because of the 1.09 bootloader. Send it back to HTC for main board replacement. Don't bother wasting your time, there is no fix for this problem. If you type info 2 in mtty you will see that your CID is corrupt. I have the same problem.
axiom said:
welcome to the growing population of bricked TyTns because of the 1.09 bootloader. Send it back to HTC for main board replacement. Don't bother wasting your time, there is no fix for this problem. If you type info 2 in mtty you will see that your CID is corrupt. I have the same problem.
Click to expand...
Click to collapse
Thanks....but how to "Send it back to HTC for main board replacement" ??
Contact the nearest service centre in your country.
pof said:
Contact the nearest service centre in your country.
Click to expand...
Click to collapse
but my device is x01ht(softbank),i flashed htcZ(NTT Docomo) rom ,service center is said "Not Proper item",so Outside repair .
Then you have a total brick
Probably in the future someone finds a solution for this... but now it's not known how to fix.
I suggest you to play with your bricked device, and probably can be the one who finds the solution
Thanks .... pof and axiom,
i while studying , repair this fix.
How to change my boot screen??
how to change my splash screen.(no cid && bootloader 1.09)
Hi All,
I got a weird problem on my 8525 recently.
Two days ago, in a sudden, my 8525's radio stops working, and the system turned very slow on every actions.
In fact, there are some mal-functions recently, like my email account disappeared itself, and phone signals is not goot, etc. But i did not pay attention to that, coz too busy. But I think that's some signal for some problem now.
After I got home, i tried to re-flash a new radio rom, but it failed, error 262.
Also, I can not flash hardspl v9, but v7 is successul.
I can flash any OS ROM, they are all working fine.
Now when starting, there is no radio at all.
Checking of nand flash returns some bad blocks, i tried to use task 2a and task 28 to repair. But no matter how i tried, there are still on bad block can not be removed. output as below
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x33F(831) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x21700
Partition[3], type=0x4, start=0x24800, total=0x16000
CE Total Length(with sector info) = 0x4A24000
CE CheckSum Length(without sector info) = 0x4900000
Cmd>task 2a
Check block : 831 - Bad
Task 28 always return a success.
So anyone here faced similiar problem with me？ Any suggestions? Thanks a lot in advance.
dustmud said:
Also, I can not flash hardspl v9, but v7 is successul.
Click to expand...
Click to collapse
use V7 then
yes, i can use v7 now.
but i am wondering the reason that i can not flash v9 is same as that i can not flash my radio..
my radio rom can not be flashed, no matter with which version.
hey,
ich got the same problem too. i don't know any answer...my hermes radio didn't work since 1 month...i tried so much but i can't flash the radio. but i have no bad blocks on info 8.
Hi,
i have a similar problem.
Tried to use task 2a but without success.
I tried to upgrade the radio but it doesn't work.
Os is updatable instead. I flashed schaps rom without problem.
Wiki only says to flash the radio rom..
Any help?
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
markafreeman said:
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
Click to expand...
Click to collapse
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
acr80 said:
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
Click to expand...
Click to collapse
Ok.. did it.
Nothing to do, it stucks on 12%.
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1F1(497) is BAD block !!!
Block 0x277(631) is BAD block !!!
Block 0x370(880) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1A900
Partition[3], type=0x4, start=0x1DB00, total=0x1CD00
CE Total Length(with sector info) = 0x3C4D800
CE CheckSum Length(without sector info) = 0x3B60000
and..
Cmd>task 2a
Check block : 497 - Bad
Check block : 631 - Bad
Check block : 880 - Bad
Any suggestion?
OK, I had done some researches on how to repair bad blocks and how to reset call timer on my Herm. There are many threats asking the same questions but the answers seem not very clear. I tried to read all related threads and tried many times for two days to solve these issues (perhaps I am not clever enought - that's why it took two days), I finally had done it. This is not a new thing but I just would like to make it easier for those who are not sure how to solve these problems yet. Just ignor it if this is not helpful or mod can feel free to delete ths threat.
Please note that this is not the only way to solve it, you may want to share if you have better ideas.
1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Downloan Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
That's what I had done and solved...
2. How to reset call timer (if you want to know reason why you want to do this, please do additional research)
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems not work)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Put your divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result "OK"
l). then type "[email protected]=270f,270f" and Enter then it should show result "OK"
Restart you PPC.... you call timer should be 00.00.00
Enjoy!!!
Sorry if you can not understand my English very well
Edit: please feel free to make correction if there's something wrong or i am missing, but I followed this and got sucessful.
DO THIS AT YOUR OWN RISK!!!
Thanks friend. This is what I am looking for.
jonhmichal said:
Thanks friend. This is what I am looking for.
Click to expand...
Click to collapse
That's why we are here.
@vichet007
Could you post a link or upload the HardSPL 1.10 Olipro.
I have used the search button but haven´t found anything.
eightball said:
@vichet007
Could you post a link or upload the HardSPL 1.10 Olipro.
I have used the search button but haven´t found anything.
Click to expand...
Click to collapse
file now attched in the first post. enjoy..
Thanks for the update
Hi lyhouth, I have problem with "task 2a" not fixing bad blocks. here is info:
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xBE(190) is BAD block !!!
Block 0xDC(220) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1D700
Partition[3], type=0x4, start=0x20900, total=0x1E700
CE Total Length(with sector info) = 0x4224800
CE CheckSum Length(without sector info) = 0x4120000
Cmd>task 2a
Check block : 190 - Bad
Check block : 220 - Bad
What else would you suggest to fix bad blocks???
after reseting the call durtion it's 00:00:00 on both incoming and outgoing calls ,
but it doesn't count at all the duration from now on[stays 00:00:00 even though i use the phone), any suggestion ?
thanks
jimmy
ultramag69 said:
Hi vichet007, I have problem with "task 2a" not fixing bad blocks. here is info:
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xBE(190) is BAD block !!!
Block 0xDC(220) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1D700
Partition[3], type=0x4, start=0x20900, total=0x1E700
CE Total Length(with sector info) = 0x4224800
CE CheckSum Length(without sector info) = 0x4120000
Cmd>task 2a
Check block : 190 - Bad
Check block : 220 - Bad
What else would you suggest to fix bad blocks???
Click to expand...
Click to collapse
Well, I am not an expert on this, but as long as I know sometimes these are factory marked bad blocks (someone had mentioned this somewhere) so that it is normal. Please let me know if there is any effection of this bad block. If not, it is normal. For my problem, it randomly did hard reset or sometime soft reset stucks at bootscreen.
jimmymotek said:
after reseting the call durtion it's 00:00:00 on both incoming and outgoing calls ,
but it doesn't count at all the duration from now on[stays 00:00:00 even though i use the phone), any suggestion ?
thanks
jimmy
Click to expand...
Click to collapse
Ah, I did not have this problem. My phone started counting after reset. Did you follow the correct procedure? Sorry, I do not know how to resolve this too. Maybe others are able to share..
I noticed about the history of ROMs you used in your signature that you used to go back to official ROM and then go back to Schap 4.31 and now your current ROM is Faria. Can you share why did you back to Schaps 4.31 and then Faria?
jonhmichal said:
I noticed about the history of ROMs you used in your signature that you used to go back to official ROM and then go back to Schap 4.31 and now your current ROM is Faria. Can you share why did you back to Schaps 4.31 and then Faria?
Click to expand...
Click to collapse
The reason that I went back to official ROM is to solve HARD RESET and STUCK-AT-BOOT SCREEN problem and the reason that I went back to Schaps ROM because I like his first boot screen picture (small blackHTC logo). finally I'm using Faria ROM as this is the most stable ROM.
USB>task 2a
USB>rtask b
0
0
atv1
OK
[email protected]=270f,270f
ERROR
????
I have tried this and got message, what to do next???
Cmd>rtask b
Enter Radio Image
strazicic said:
I have tried this and got message, what to do next???
Cmd>rtask b
Enter Radio Image
Click to expand...
Click to collapse
I think you may have used this with wrong device. This is for Hermes not Wizard.
batuocbongdem said:
USB>task 2a
USB>rtask b
0
0
atv1
OK
[email protected]=270f,270f
ERROR
????
Click to expand...
Click to collapse
Can you let me know what device are you using? I had tested this with Hermes only and it may not work for other devices.
hermes 100 (dopod 838 pro)
radio 1.54.30.10
IPL 1.04
SPL 1.10.Oli
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
batuocbongdem said:
hermes 100 (dopod 838 pro)
radio 1.54.30.10
IPL 1.04
SPL 1.10.Oli
Click to expand...
Click to collapse
I see your problem now. You missed one commend "ate1" before starting "atv1". Follow the below command exactly or the instruction in the first post, you may get rid of it:
USB>rtask b
0
0
ate1
0
atv1
OK
[email protected]=270f,270f
OK
mtty under Linux?
lyhuoth said:
This is not a new thing but I just would like to make it easier for those who are not sure how to solve these problems yet.
Click to expand...
Click to collapse
Thanks a lot for that lyhuoth, it's very handy to have these things collected together.
I'm an idiot said:
This requires mtty.exe, which is Windows-only. Is there something like mtty for linux?
Searching the forum turned up nothing obvious, but I did stumble across pof's HTCflasher which has a "enter serial prompt" option.
On the other hand, everything I read suggests that mtty is just a serial-port command line interface, which suggests to me that using minicom might be sufficient...
Is HTCflasher or minicom a suitable mtty substitute under Linux?
Click to expand...
Click to collapse
So, it says quite clearly on the pof's HTCflasher thread that it "replaces mtty"... Also, what I hadn't seen earlier, was the wiki entry for the Bootloader which says to use "mtty under Windows or minicom/cu under Linux"...
Anyway, I've managed to run a bad-block check using HTCflasher...
Code:
[email protected]:HTCFlasher$ ./HTCflasher -m hermes1 -v -s /dev/ttyUSB0 -i
=== XDA-Developers HTCflasher v2.0 by pof
=== Open source RUU for HTC devices
[] verbose mode enabled
[] Getting device info... please wait
Device=HERM100
SecLevel=0
CID=SuperCID
SPL=2.10.Oli�
CommonBase=1.51d
Done!
[email protected]:HTCFlasher$ ./HTCflasher -m hermes1 -v -s /dev/ttyUSB0 -p
=== XDA-Developers HTCflasher v2.0 by pof
=== Open source RUU for HTC devices
[] verbose mode enabled
[] serial prompt shell. Use ^C to exit.
Upper CPLD version=0x4
Main Board version=0x6
Cmd>info 8
info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x14F00
Partition[3], type=0x4, start=0x18100, total=0x22700
CE Total Length(with sector info) = 0x30E0800
CE CheckSum Length(without sector info) = 0x3020000
Cmd>
Hope this helps anyone who is trying to run this under Linux.
Thanks for putting this together.
it always show error,someone help plese
USB>
USB>rtask b
0
0
ate1
0
atv1
OK
[email protected]=270f,270f
ERROR
[email protected]=270f,270f
ERROR
Hi,
I have been working for days and nights through wiki (you guys do a great job) and reading forums on the issues of bricked hermes, and wanted to know am i wasting my time with mine as follows;
Dopod 838 pro (Hermes100)
IPL-1.01
SPL-1.09 (BEFORE 1.04)
Corrupted CID, IMEI, RADIO (NO gsm)
USB>task 32
CID: Wait interpreter timeout
Level = FF
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a S024
Device Name: H, Bootloader Version : 1.09
Built at: Nov 7 2006 22:59:17
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>info 4
HTCSDOPOD001Û<wHTCEUSB>
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xD(13) is BAD block !!!
USB>checkimage
IPL CRC checksum = 0x24C42773
SPL CRC checksum = 0x91BDD7D5
CE is None.
ExtROM is None.
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
spl-1.04 which allowed me to flash original roms but hung at 14%, i guess this is when the rom installs the radio part of the rom which mine was corrupt when trying in the first instance to update radio rom 1.54.30.10 which got me in this mess.
So its looking like service center i guess?
Were you flashing it at the time it stopped working? What is the history?
history i had a crc10.2 version rom, flashed supercid, flashed hardsplv7, then flashed original dopod shipped 3 rom 3.54.707.4 radio 1.47.30.10 worked great. Then flashed upgraded radio 1.54.30.10 and then bricked. Downgraded spl to 1.01mfg using mtty and then it corrupted my cid and imei. so now i left with a corrupted imei,cid and radio.
Did you use the "task 2a" command to fix bad blocks?
Might help....
task 2a command only works with mfg bootlooder eg spl-1.01 MFG, i cant go back to mfg 1.01 because your cid needs to be supercid. so my is answer no regrettably. iam thinking with spl-1.09 i could flash the factory rom via sd card? but where do you get factory roms from not upgrades considering my cid is locked.
There were a heap of roms on the wiki (dont know if they're still available) both cooked and stock roms. Who you with? Might be an idea to let people know as they might be able to supply links... Just a thought...Cheers
i am currently with 3, but i bought the phone used not sure who it was prior.
only a thought but are using a usb hub,if so stop and connect directly,dont know if my problems were exactly the same but 4 days of frantic flashing and stomach ulceration were instantly relieved by doing the above,good luck,btw the 3 rom from dopodasia is still available online and used with a mod wrapper would allow a card intall
i have tried hut..3 roms via flashing usb and by sd get error via sd not allowed. i guess the roms online are upgrades where i need the factory wm5 rom.
wm5 rom is a good idea and there are plenty stock wm5/6 roms floating around,but use the modded wrapper to install via usb,no hub,many people swear by at&t roms to get them out of trouble
thanks Stevie boy for your ideas and comments, still having problems i have tried all the dopod roms on xda developers using the custom RUU wrapper so i can select my spl which is spl-1.09 and i get invalid vendor id. if i had SPL-1.04 it has a bug where i leave the phone connected to USB and run the wrapper twice and it updates but this is not working now on spl1.09 bummer.
i feel your pain man,all i can say is that the wiki saved me,there is so much info there its a bit hard to see your way thru but you should be able to work it out.i assume you can still force bootloader is so it seems all is not lost try pm to mr vanx to get more specific advice
.....
I'm with the same problem...
can anyone give more advices...
_______________________________________________
Spv m3100
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a S024
Device Name: H, Bootloader Version : 1.09
Built at: Nov 7 2006 22:59:17
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>task 32
CID: Wait interpreter timeout
Level = FF
USB>checkimage
IPL CRC checksum = 0x24C42773
SPL CRC checksum = 0x7725B228
CE is None.
ExtROM is None.
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xD(13) is BAD block !!!
how to install???
hello guys,, since i am new with smartphones,, just bought a htc touch,, but don't knowq how to install the T9 pad,,
can anyone help me???
Is the HTC touch even a Hermes???
Me too, this posts seem no one able to fix it.
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x15E(350) is BAD block !!!
Block 0x184(388) is BAD block !!!
Block 0x1CF(463) is BAD block !!!
Block 0x1E8(488) is BAD block !!!
Block 0x2EA(746) is BAD block !!!
Block 0x2F3(755) is BAD block !!!
Block 0x311(785) is BAD block !!!
Block 0x364(868) is BAD block !!!
Block 0x3C6(966) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19E00
Partition[3], type=0x4, start=0x1CE00, total=0x1DA00
CE Total Length(with sector info) = 0x3AA7000
CE CheckSum Length(without sector info) = 0x39C0000
anyone can help ?
Try "task 2a"... Thats the command to fix bad blocks.
ultramag69 said:
Try "task 2a"... Thats the command to fix bad blocks.
Click to expand...
Click to collapse
Thanks for the reply, I tried tat too. nothing happend.
I tried almost everything, like cid unlocker, flash radio, flash back to original rom, flash from sdcard...etc..
Now trying to get the window platform builder.
You need to downgrade your SPL to 1.10 for those commands to work. If you haven't, nothing will work...
ultramag69 said:
You need to downgrade your SPL to 1.10 for those commands to work. If you haven't, nothing will work...
Click to expand...
Click to collapse
The problem is, I can't flash any of the rom. radio, hard spl, or others.