Related
I have been looking everywhere for information on this. Is pass-though possible with the Cingular 3125, using Cingular's newest ROM? When I plug my phone into my computer, it isn't able to see the Internet at all because that automatically disables GPRS. I would really like to use my laptop's much faster Wifi connection. If that isn't possible, can I at least keep GPRS on?
thanks in advance
Try from active sync's settings->connection settings to put-> My computer is connected with:
internet
Yes, that is set. Still no luck. Does this work for you? I remember one of my former Windows Mobile devices (I think the Motorolla MPX220) had an option for Pass-though in the settings, but I don't see it anywhere on the 3125.
I didn't have any problem with that. Now I use the greek qtek rom but before I used the cingular rom for some weeks and I never have problem with internet connection via active sync.
hrm... anyone currently running the current Cingular ROM able to help me out?
First to make clear that I used this rom that you talking about without internet connection problems.
Sometimes helps to uninstall, reboot and reinstall active sync. Like this some problems solved.
And if you have a bluetooth device on your pc you can try to connect to active sync via bluetooth, and check if the internet works in that case.
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
I've also tried a few registry edits, and used all variations of modem scripts, and got all the dialup info from verizon directly (so I know it was right ) but could not get dialup to work either. Usually not detecting a carrier, other times lockups.
I truely want to get the bluetooth-PAN working again as it did on my tilt. Anyone have this working on the MAc with a XV6800 on verizon?
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Cycomachead said:
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Click to expand...
Click to collapse
As mentioned, I have tried a ton of different methods to try and use the data connection, from using dialup settings, to trying to get the Bluetooth Pan working. I've removed and re-paired the device from my mac, flashed roms, hacked away at the registry a ton of times. Nothing seems to give so far.
I've got one more suggestion, found here: http://forum.xda-developers.com/showpost.php?p=1794133&postcount=29
I'm going to give this a shot tomorrow and will let you know how it goes.
Eponymous069 said:
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
Click to expand...
Click to collapse
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
thetaz01 said:
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
Click to expand...
Click to collapse
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Eponymous069 said:
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Click to expand...
Click to collapse
hey, ok great, i just downloaded the file, Just one question..
The file i downloaded has about a page of Reg Key changes, you didnt mention that in your "thngs to do"
Just want to see if i am to make all those changes or not.
thanks
So, your problem is in getting the internet connection to work and not connecting it to the mac, right? Does your mac recognize the phone as a modem?
If you're using MR1 I think you might need to hard reset and the soft reset right before the Verizon customizations run. You won't be able to run their apps but there won't be software to cripple the phone.
i have the same exact issue i have a new macbook pro and the bluetooth connects however the speed is slower then dial up it works perfectly however on bootcamp apple has to change the drivers
So more results.
I tried all the registry edits, (much easier with CD-Regedit so you can make the changes on your desktop) and now internet sharing does not even allow me to select a connection type, it had worked previously.
The only thing that was missing before I made the registry changes was that when I pair the phone, in the services listed, "Network Access Point" is not one of the listed services. My old phone has this service listed, and this is how I used it, where I started internet sharing on the phone, then selected the bluetooth device (phone) on the mac and selected: "Connect to Network) and it worked flawless.
Back to the drawing board. I'm going to try next to re-flash the MR1 rom and do as Cycomachead suggested and stop verizons customizations from happening.
bryanw17, what were the exact settings you used for dialup on the mac. The modem script used is probably the most important piece.
Number: #777
Username: Phonenumber (or [email protected]????)
Password: (We know this one, not sure if it's legal to post though)
Darn, I wish I could provide more help. It is indeed possible in Leopard, I had it going before I began flashing my phone - and I no longer have a data plan to test, otherwise I'd be using it a lot more!
aparently no one with a new macbook pro can get bluetooth pan to work. I have it connected however the drivers for the new macbook pro do not provide a good connection if you search the mac forums theyve been talking about it on there. I dont use a username n password however because i use the internet sharing app for the moment i am using wmwifirouter to connect online however my xv6800 doesnt charge at the same time for some reason so u can only use it till the battery dies
So some more results.
I installed ICS and all the registry edits. Then the internet Connection Sharing did not function at all. I verified the registry settings, all were fine. So no dice with me.
So back to the drawing board.
I installed a previous rom. DCD 3.2.6, and guess what? From initial flash of the phone and initial setup, no apps installed, no hacking, ICS runs and provides a network connection to my mac perfect. I also instantly notice when I pair it through bluetooth, it allows the option of "Access this device as a network port". And "Network Access point" is listed as an offered service.
I installed newer rom DCD 3.3.4, and the MR1 Rom. Neither have ICS installed initially. I can install the two files: intshare.dll and IntShrUI.exe into the windows directory without any reg edits, and then ICS works on the phone, but then pairing the phone to the Mac, and attempting to discover teh PAN service is unsuccessful. It only is discovered as a Dialup Access device, and not a "Network Access Point".
So, It appears I can get internet Sharing via Bluetooth PAN to function on the phone no matter which rom, but have not figure out how to tell the mac, or trick the mac, into thinking the "Network Access Point" service is available.
I have pulled completed registry dumps with CE-Regedit and compared the differences between the two, which there are quite a few, but not sure how to export these differences with the program so I can apply them to the other roms registry. I guess I might try a fukll backup and then restore to the new(er) rom and cross my fingers.
I'd stay with the 3.2.6 rom. and 3.42.50 Radio, with PRI 2.03, but I can only seem to make the GPS function successfully with the MR1 stock verizon rom.
Anybody want to take the two regs files compare, and see if they can find out where we can make the change to have the phone advertise the service "Network Access Point" when being paired to the mac or PC?
On one last note. I also tried the method of restoring the MR1 official rom, and then not allowing the customizations. ICS will function, but again, not advertising the service: "Network Access Point" when pairing, so it's not recognized as a valid networking method.
Where did you get those files (intshare.dll and IntShrUI.exe) to allow ICS via bluetooth?
Nevermind, I found it on PPCGeeks.
Don't know why DCD disabled the BT DUN on ICS.
I use Missing sync, and I turned on PAN then added my phone and it shoed it as a modem when I added it, but my BT connection is fairly Unrealible compared to the USB teather on Bootcamp
i was under the impression that bt pan has been whacked on macbook pro models starting from early 2008 on. anything earlier than that and it seems to work great. does anyone know why bt pan doesnt work on the newer machines and how to get it to work?
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.
Hey all
Used to have an s730 and used it with a Tom Tom 720 with data over the bluetooth connection. I did this by installing the BTDUN.cab that is floating around on these forums. It worked fine for this and never had a problem
My s730 broke and was replaced with a s740. I've installed the same CAB and although TomTom can see it has a data connection it just does not always work. Some days I can't get data at all and other times data only works for 5 mins for dying.
Anyone got any ideas. HTC said the device only support PAN connections vs TomTom's using DUN connections and I said use a different device.
Anyone know if a s730 firmware can be used?
Thanks
AFAIK you cannot (easily and without any trouble) ass DUN bluetooth profile in Windows Mobile 6. There was the cab, but it causes a lot of trouble and is not compatible with all ROMs/devices. Internet access in WM6 is no longer DUN, not it uses Internet Sharing app and PAN profile.
And no, you cannot exchange firmwares between devices. So far you cannot even install any alternative firmware on Rose, because we still do not have HardSPL (but there is one person that is working on this now). But still you should not expect DUN working in WM6.
(double post, to be deleted)