Does anyone know if one can use any 2.5mm earplug handsfree with the XDA Mini S? The one supplied is difficult to carry lots of wires, would like to have a monaural one. Has anyone tried any? Kindly let me know. Thanks.
I have been looking for the same earphone since i bought the item on JAN06, till now I still cant find a compatible one.
That will be helpful if anyone know which is the best headphone with microphone.Not the Bluetooth one!
Thanks!
ebay Adapter eventually works
Hi there,
I was also looking for a good headset fromt he beginning on, the issue might be solved if I can install the A2DP software (will try later), but a nice wired headset would still be nice.
My favorite would be the ones SonyEricsson is shipping with the music phones.
I actually tested a 2.5mm adapter with cord and speakerpice (with clip) plus adapter for 3,5mm, which would be perfect. One was for Nokia, one for Motorola - both are NOT compatible with the HTCs!
Lately I saw a shop selling the same adapter specifically for HTC devices, so the problem might be solved.
Also I saw 2 wired 2,5mm stereo headsets from Jabra on the US website, they are for sale there but NOT in Europe. If these would work, they would for sure be of very good quality.
Anyone tested these?
Found one
I found one listed on Ebay under HTC Wizard. Its item number 9716253639, seller's name is 5starcommunication. Looks quite cool and they will mail it world wide. Will take sometime before it reaches India. But if anyone in the US orders and tries do let us know. Thanks.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=9716253639&rd=1&sspagename=STRK:MEWA:IT&rd=1
I bought a 2.5mm to 3.5mm adapter from Expansys UK and it works just fine. Sorry - no part number on me, but it should be easy to find on their web site.
Hope this helps
bloney said:
I bought a 2.5mm to 3.5mm adapter from Expansys UK and it works just fine. Sorry - no part number on me, but it should be easy to find on their web site.
Hope this helps
Click to expand...
Click to collapse
Are you able to work with the MIC?
waiho said:
bloney said:
I bought a 2.5mm to 3.5mm adapter from Expansys UK and it works just fine. Sorry - no part number on me, but it should be easy to find on their web site.
Hope this helps
Click to expand...
Click to collapse
Are you able to work with the MIC?
Click to expand...
Click to collapse
I use it for headphones only (senheiser PX200 which sound great with the Wizard!), so not sure if they have mic connected or not. Sorry.
Get the adapter at radioshack.. there r tons n tons of them for $3.. i got one n it works like charm..
with/out mic
I wonder if the ones from Radioshack have a mic in the wire?
I have an adapter 2,5 to 3,5mm with GREAT sound quality, however without microphone in the adapter, thus I always need to unplug the adapter and take off the headphones to answer a call - sucks!
As mentioned so far i Only saw one adapter on ebay WITH a microphone in the adapter piece (and clip on the back) - but do not know how it performs...
http://cgi.ebay.de/XDA-Mini-MDA-Com...06652399QQcategoryZ123195QQrdZ1QQcmdZViewItem
You could also try this one ...
Handsfree and Headphone Adapter
Still no earpiece...
Sigh... still no proper in ear headset (monaural) in sight... :?
2.5 mm to 3.5 mm adapters at Radio Shack
Beware of the Radio Shack adapters. They stick out and are easy to catch on a doorway as you walk through it. I did so a few weeks ago and the headphone jack no longer worked. The adapter male end bent back and damaged the phone female socket. The result was very quiet sound from the headphone jack, totally unusable for phone or music.
I sent the phone back to T-Mobile and they very kindly sent me a replacement. I bought a new Radio Shack 2.5mm male to 3.5 mm female adapter and the same day proceeded to catch it on another doorway, bending back the male plug, and damaging the phone female headphone jack. No sound again from the headphone jack. I will stay away from the headphone adapters from now on.
Phone speaker not working after using headphones - No sound
I had a similar problem (not the same). After using a 2.5 to 3.5 mm adapter my phone speakers and the mic didn't work anymore. I was about to send the device in, when I read about a solution (I think it was in XDA-Dev somewhere).
You'll have to gently move the headphone jack forward and back, twisting it a litte or even better use some compressed air blowing into the jack. It works best, if you to take out the battery and blow from the back.
My speakers work again, but the same thing happens now and then. It seems there is some switch inside the headphone/mic jack, which doesn't go back. That only happens when I use the adapter.
I realize that this is an old thread, but here is an idea for you. As far as I know, pretty much any 2.5mm headset should work. I don't use it for my phone personally, but I recently purchased a Plantronics Gamecon X20 headset for my Xbox 360 after my old one broke. Since it has a plain 2.5mm jack on the end, I thought I would plug it into my phone to see how well it worked. The answer, pretty well apparently. My wife said that it was really clear and, likewise, she sounded really clear on my end. It's going to be a little larger than the ones that have the mic hanging down inline with the wire, but on the other hand, since it's a boom mic the sound quality should be superior with less noise. I haven't tried it for listening to music so I can't vouch for the quality there, but since you are wanting a monaural headset I rather doubt that is relevant anyways. The headset was only $20 at GameStop and they had a used one for $10.
two-zero said:
I had a similar problem (not the same). After using a 2.5 to 3.5 mm adapter my phone speakers and the mic didn't work anymore. I was about to send the device in, when I read about a solution (I think it was in XDA-Dev somewhere).
You'll have to gently move the headphone jack forward and back, twisting it a litte or even better use some compressed air blowing into the jack. It works best, if you to take out the battery and blow from the back.
My speakers work again, but the same thing happens now and then. It seems there is some switch inside the headphone/mic jack, which doesn't go back. That only happens when I use the adapter.
Click to expand...
Click to collapse
In your case, I would say that sounds like a bad adapter. I routinely use one in mine and don't have that problem. It's one of those nasty stick adapters though, so you have to be careful with them. I've seen some cable type adapters for not too much so you might look into one of those instead.
Found info which might help
HERE IS AN/THE ANSWER.
My WIZA200 and Sony P900 phone the mic headsets are compatable, even the answer button works. If you cant find what your looking for under the flavour WIZa or HTC etc... just look for what you need as a P900 type and you will be sorted.
I just checked the pinouts and this answers the very much asked question... what are the pinouts.... here they are....
http://pinouts.ru/CellularPhones-P-W/sonyericssson_headset_pinout.shtml
FOR WIZA AND SONY P900 >>>> 2.5mm 4 pole jack: PIN1 LEFT+, PIN2 RIGHT+, PIN3 MIC+, SHIELD(PIN4) GROUND. I just checked with multimeter and to get call answer pin3 mic and shield must short to signal the press of the answer button.
---
Just for reference Nokia 2.5mm 4pole jack is very odd... this is how they do it.
http://pinouts.ru/CellularPhones-Nokia/nokia_headset_pinout.shtml
on 4pole 2.5mm: 1=speaker+(positive) ### 2=mic+ ### 3=speaker -(negative) ### pin4 = mic - ###short mic+ and mic - to answer call
on 3pole 2.5mm: 1=speaker+(positive) 2=mic+ 3=shield(ground-negative) ### to answer call short speaker and shield.
See how they change their minds... first on 4 pole jacks answer call was on mic side short, then it goes on 3 pole jacks to short the speaker and ground to answer call... can these guys not make up their minds. Grrrr... totally baffling logic in this design, escept they can keep you buying specialised gear for each phone
Glad to see Sony and HTC used a more logical system and seem to stick to it. I suspect the HTC Touch HD 3.5mm is wired the same as the Wiza 2.5mm system just 3.5mm jack not 2.5mm jack.
Someone should make a 2.5mm 4pole to 3.5mm 4 pole converter to use old cherised headsets on the HTC Touch HD... know of any, anyone?
kull said:
Sigh... still no proper in ear headset (monaural) in sight... :?
Click to expand...
Click to collapse
Another solution.....
I know this might sound odd but a simple solution is get your stereo headset & mic thing and cut the right earpiece lead off...
Now you may have to strip the wire a bit and wrap a piece of insulating tape to stop the wires inside touching, which will cause problems (crackling or loss of audio on remaining speaker most likely). Once the wires are safely insulated away, youll have what you are seeking, a monaural one earpiece mic heaset... saves having to buy one that your finding hard to do.
Seems a shame to sacrifice a stereo headset down to mono, but if thats your poison, go for it.
pinouts.ru is the shiz
Get out the soldering iron and make a frankenstien. I grafted a 3.5 female to my old nokia's pop port so I could hook it to my stereo (before I got a BT adapter) and to my amplified helmet speakers (that were sorced from a computer speaker set.) Before I lost the phone I was planning to add a 2.5 mono female socket for a lil clip-on mic I have. Point being, it's only 3 signals and a ground, should be able to come up with something.
ts worth having a go
Yeah having a go is definately worth it. I just utilised the pinouts.ru stuff and a bit of personal common sense knowledge of the wirings and managed to make myself a 3.5 touch hd 4 pole jack into a 3.5 3 pole jack which works ofr my aircraft. I can now fly and make calls through my pilots headset. It shows it can work. You arent dealing with any dangerous voltages... its all piddly "put it on your tongue and you wont get hurt" voltages... speakers and mics... all easy to work out. Worth having a go.
hi there, my headphone jack for my 8125 is broken, i do want to repair it but am scared lol, anyways, i was wondering if the extusb headset from a kaiser can be used with our phones?
stupidly, no.
tried this with the headphones that came with my vox that work gave me.
the usb plug is a standard shape (usb type c) which is why ANY sync cable fits any phone, but the headphones are a funny shape on one side meaning that they wont plug into another type of phone eg wizard. I think they will fit other newer htcs but i believe the newer htcs dont have a jack plug any more.
shame really as they sound better to me.
not sure if they would even work anyway as the phone presumably would need to know to send the sound to the usb instead of the jack plug.
I've got a USB charging cradle in my car which works fine.
I use a 3.5mm cable to connect my mp3 player to the car stereo which works fine.
I tried playing music from my HD to the stereo whilst charging and I get awful white noise and a constant pinging noise. If I take the phone off the charger it works fine. I can't find anything in the wiki or forums and I've seen some people on other forums with the same problem.
Anyone know what is wrong with this setup or I need a different spec cable (I guess its a standard stereo 3.5mm cable, so 3 contacts and I think the HTC one has 4 coz of the mic, but it works fine when I stop charging it. I guess it could also be a problem with the pins on the USB charger, but I thought the HD didn't have the extUSB connection.
I'm off to the USA on Sunday with a hire car so it would be really handy to be able to charge and play music!
One morning I got up and tried to plug my earphones, and I couldn't! The plug just won't come to the end! I played with screwdriver in audio jack as I thought maybe something got stuck in there, but still the same. Has anyone experienced this problem?
I have same issue with audio lead in my car, it won't fully insert and will only output through cable if I turn the cable around when inserted as much as I can.
Sent from my Atrix Neutrino [email protected]
Hello guys, I finally have my beloved HTC U11, and I simply love it. I have just a little concern for the headphones... The quality is very good, and they work fine..
However, I noticed that when my phone is in my pocket or on the desk listening the music, when the Type-C connector moves very very slightly on the sides the music pauses automatically. Of course the connector does not move out, just a little on the sides.
Is that normal or may I have faulty headphones?
Hello,
That never happened to me. I always listen to music with my u11 in my pocket but I never experienced your issue.
You might have a broken headset or a broken usb port on your phone.
If you don't have a warranty you might want to try cleaning the headset connector with alcohol.
It´s true. The movement forces connector mechanically. I have an original USB to P2 Adapter useless because I have had this kind of issue