Related
Hi,
I have a Logitech Precision PC Gaming Headset http://www.computingondemand.com/reviews/audio-Logitech-PrecisionGamingPCHeadset/page1.shtml and it works great.
So would need an adapter like this to connect it to the Blue Angel -
http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT16
Am I correct that BOTH the speaker ***and the microphone*** are then rerouted to the headset, or does it only reroute the speaker?
Thanks People
I have the same setup. Both connections on the adapter are for headsets only
1 for headset
1 for stereo headset
I contacted them about this and they noted that there may be a need for this type of setup, but had no immediate intentions of changing the config.
Raptor
I have a Logitech Precision PC Gaming Headset http://www.computingondemand.com/reviews/audio-Logitech-PrecisionGamingPCHeadset/page1.shtml and it works great.
So would need an adapter like this to connect it to the Blue Angel -
http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT16
Am I correct that BOTH the speaker ***and the microphone*** are then rerouted to the headset, or does it only reroute the speaker?
Click to expand...
Click to collapse
Well..., I think I have to disagree with Raptor :shock:... I have both the PPCPADPT16 and the PPCPADPT15. The 2.5 side on the 16 does indeed enable the mic on a standard 2.5mm head set and the 3.5 mm side provides stereo sound, but no mic.
I use mine as part of a car kit for my xda IIs. I use the 3.5mm side to plug in a cassette adaptor and feed stereo MP3 sound and the phone through the car speakers. I plug in a regular 2.5mm hands free kit into the 2.5mm side of the adaptor and use that as the mic attached to the door pillar Works pretty well for all up cost of about $45
The 15 works by feeding the stereo sound into the car stereo via the cassette adaptor, while keeping the internal speaker of the XDA IIs enabled. In this way you can play the sound through the car stereo (or any stereo headset) while still being able to answer a call via the xda's mic and listen to the caller over the stereo speakers...
Hope that helps
Regards
Chris
Ah...now after rereading the posts, I think I now understand what you were looking for
You need an adaptor that provides stereo sound and a mic in a single 2.5mm or 3.5mm connector....correct..? In which case neither of these do it in a single connector..
Sorry, misunderstood on the first pass :roll
Regards
Chris
cbrow51
indeed stereo sound and a mic ,
thanks for the confirmation!
/moo
cbrow51 said:
I have a Logitech Precision PC Gaming Headset http://www.computingondemand.com/reviews/audio-Logitech-PrecisionGamingPCHeadset/page1.shtml and it works great.
So would need an adapter like this to connect it to the Blue Angel -
http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT16
Am I correct that BOTH the speaker ***and the microphone*** are then rerouted to the headset, or does it only reroute the speaker?
Click to expand...
Click to collapse
Well..., I think I have to disagree with Raptor :shock:... I have both the PPCPADPT16 and the PPCPADPT15. The 2.5 side on the 16 does indeed enable the mic on a standard 2.5mm head set and the 3.5 mm side provides stereo sound, but no mic.
Click to expand...
Click to collapse
I use mine as part of a car kit for my xda IIs. I use the 3.5mm side to plug in a cassette adaptor and feed stereo MP3 sound and the phone through the car speakers. I plug in a regular 2.5mm hands free kit into the 2.5mm side of the adaptor and use that as the mic attached to the door pillar Works pretty well for all up cost of about $45
Click to expand...
Click to collapse
Chris,
Does your 2.5mm hands free kit comes with its own speaker, too? When you plug the 2.5mm hands free kit into the 2.5mm side to use the mic, does the sound comes out of the 2.5mm hands free kit's speaker also? Or the 2.5mm side only connects the mic and no sound is routed through it?
If no sound is routed through the 2.5mm side then it sounds like the PPCPADPT16 is designed for one to use his own speaker (cassette adapter to car's speakers, etc...) and his own mic (hands free kit,etc... but then one wastes the hands free kit's speaker). Does any body know if there is a mic-only device that can plugs into the 2.5mm side? I couldn't find any, a device that has a mic always come with an earphone. arghh!!!
If there is sound routed through the 2.5mm side, then whenever one receives a call, sound will come from all over the place, louder sound from the car's speakers competing with the weaker sound from the hands free kit's speaker... It sounds distracting!!
I have a feeling the designer meant to add a mic to this adapter so that the 3.5mm side and the 2.5mm side can be used independently. The 3.5mm side for those who wants to use the car's speakers and the adapter's mic... The 2.5mm side for one who wants to use a hands free kit...
The 15 works by feeding the stereo sound into the car stereo via the cassette adaptor, while keeping the internal speaker of the XDA IIs enabled. In this way you can play the sound through the car stereo (or any stereo headset) while still being able to answer a call via the xda's mic and listen to the caller over the stereo speakers...
Hope that helps
Regards
Chris
Click to expand...
Click to collapse
PPC Adaptors and hands Free Kit
Hi Sumtingwong
The hands free "kit" I put together is actually an assembly of individual components I selected, rather than an actual kit.
I use a standard non powered, vent mount holder for the xda 2s and power the device via a standard car charger. The holder does not have any kind of speaker built in. I am currently using the PPCtechs "16" adaptor, with the 3.5mm side plugged into a cassette sound feeder (have also used it with an FM sound feeder as well) and the 2.5 mm side plugged into a standard 2.5mm mono hands free speaker/mic combo. I have the mic part of this attached to the drivers side door pillar. Then, I have MS Voice Command installed on the xda, with the "record" button on the xda mapped to the Voice Command software
So the way it works is as follows.
1. Get into car and place xda in vent mount holder. Attach car charger and PPCTech # 16 adaptor to xda.
2. Turn car radio / stereo on and insert casette sound feeder adaptor (you can use a FM Sound Feeder here instead and tune to the appropriate FM station)
3. Hit the xda "record" button and at the Voice Command prompt say "Play Don Henley" (It's the only CD I have on my SD card right now.. ) The music starts!
4. Then I decide I want to call someone, so, while the music is still playing, I hit the record button again and on the Voice Command prompt say "call Veronica at home". The music stops and the phone dials the number from the contact list.
5. The phone rings and I get her voice mail (she's never at home ) So I hang up and restart the music.
6. Then a call comes in, which interupts the music with the ring tone through the car speakers. I can see who is calling via the xda screen and hit the "call answer" button on the xda to answer the call. My car has volume up and down on the steering wheel, so that its pretty convienent to adjust the volume from there.
7. When the call is done, I hit the "call end" button on the xda and the music starts back up automatically.
It works pretty well. A couple of other things to address your questions.
a. I don't have a speaker built into the xda holder, so sound coming out there is not an issue for me.
b. The 2.5mm headset side does still have the speaker attached, but sound is not a problem as its so low.
c. I too have not found a (cheap) 2.5mm "mic only". I asked the PPC Tech folks if they had or could recommend one. They did not, but their solution was simple and inexpensive...."we find just cutting of the headphone part off the handsfree works well"!!
The other thing I use and love is PocketMax "PhoneAlarm" (www.pocketmax.net) As well as some great alarm functions, this app supports various profiles that control, amongst other things, the input and output sound on the PPC mic and speaker. So I set up the "car" profile with a mic sensitivity and audio output that matches the car stereo best. That way there are no big volume changes when switching from say the car radio to the MP3 music on the XDA (BTW, you can also listen to internet radion on the XDA this way too!)
Well there you go, hope that answers your questions. If not, let me know.
Regards
Chris
@ chris
how do you get internet radio ??? my car doesnt have wifi in it
Hi Zohaer
Via the GPRS connection. Try out this link in Windows media player..web favorites..
http://windowsmedia.com/redir/pocketpc.asp
Its for classicfm.
Regards
Chris
perfect explanation
perfect explanation pretty much covers what i want to do break out the sound from my mda III.
I would like to go one stage further and use a pc stereo headset with my mda III but i think that would require a mono 3.5 socket as well as the stereo head phone socket.
looks like the devices discussed so far are working as a pass through to a 2.5 headset and a stereo 3.5 socket for what ever ...
I've not been on this board long but this looks an ideal thread for a sticky any moderator think its worth while
regards
j
Black Night wrote
I would like to go one stage further and use a pc stereo headset with my mda III but i think that would require a mono 3.5 socket as well as the stereo head phone socket.
looks like the devices discussed so far are working as a pass through to a 2.5 headset and a stereo 3.5 socket for what ever ...
Click to expand...
Click to collapse
Hi Black Night
The 3.5mm socket on the # 16 is for stereo headphones (no mic), while the 2.5 socket is for regular hands free kit with mono head phone plus mic. I agree with post above that a useful addition to the connector range would be a 3.5mm that was stereo and also included the mic. This would allow the use of the gaming headset mentioned above.
For now though you could use the # 15 adaptor. This is a 3.5mm stereo socket that accepts a 3.5mm stereo headset AND also keeps the mic on the device active. With this you can get stereo sound and still communicate wth the xda via its built in mic while the headphones are plugged in.
Regards
Chris
Re: PPC Adaptors and hands Free Kit
cbrow51 said:
Hi Sumtingwong
The hands free "kit" I put together is actually an assembly of individual components I selected, rather than an actual kit.
I use a standard non powered, vent mount holder for the xda 2s and power the device via a standard car charger. The holder does not have any kind of speaker built in. I am currently using the PPCtechs "16" adaptor, with the 3.5mm side plugged into a cassette sound feeder (have also used it with an FM sound feeder as well) and the 2.5 mm side plugged into a standard 2.5mm mono hands free speaker/mic combo. I have the mic part of this attached to the drivers side door pillar. Then, I have MS Voice Command installed on the xda, with the "record" button on the xda mapped to the Voice Command software
So the way it works is as follows.
1. Get into car and place xda in vent mount holder. Attach car charger and PPCTech # 16 adaptor to xda.
2. Turn car radio / stereo on and insert casette sound feeder adaptor (you can use a FM Sound Feeder here instead and tune to the appropriate FM station)
3. Hit the xda "record" button and at the Voice Command prompt say "Play Don Henley" (It's the only CD I have on my SD card right now.. ) The music starts!
4. Then I decide I want to call someone, so, while the music is still playing, I hit the record button again and on the Voice Command prompt say "call Veronica at home". The music stops and the phone dials the number from the contact list.
5. The phone rings and I get her voice mail (she's never at home ) So I hang up and restart the music.
6. Then a call comes in, which interupts the music with the ring tone through the car speakers. I can see who is calling via the xda screen and hit the "call answer" button on the xda to answer the call. My car has volume up and down on the steering wheel, so that its pretty convienent to adjust the volume from there.
7. When the call is done, I hit the "call end" button on the xda and the music starts back up automatically.
It works pretty well. A couple of other things to address your questions.
a. I don't have a speaker built into the xda holder, so sound coming out there is not an issue for me.
b. The 2.5mm headset side does still have the speaker attached, but sound is not a problem as its so low.
c. I too have not found a (cheap) 2.5mm "mic only". I asked the PPC Tech folks if they had or could recommend one. They did not, but their solution was simple and inexpensive...."we find just cutting of the headphone part off the handsfree works well"!!
The other thing I use and love is PocketMax "PhoneAlarm" (www.pocketmax.net) As well as some great alarm functions, this app supports various profiles that control, amongst other things, the input and output sound on the PPC mic and speaker. So I set up the "car" profile with a mic sensitivity and audio output that matches the car stereo best. That way there are no big volume changes when switching from say the car radio to the MP3 music on the XDA (BTW, you can also listen to internet radion on the XDA this way too!)
Well there you go, hope that answers your questions. If not, let me know.
Regards
Chris
Click to expand...
Click to collapse
Thanks for the reply Chris. It's interesting to be able to "look" inside your car and "see" your typical day
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Finally I've made a move. TyTN X Sony Crossover Custom Headphones.
I've used a solder to remove the original earbuds wire and soldered a pair of cut SONY MDR-EX71SL headphones on. They sound 100 times better than the stock ones. This will ease my frustrations for now. I was tempted to solder my MDR-EX90LP on but they are $100 a pair. Too much for now
Later on I will try to rework the stock mini USB headphone and make a 2.5mm connector for it so I can use all kinds of headphones(with mic) and connect to a speaker system as I want!
EDIT: It appears that the original mini USB headset has 6 wires, 4 should be for the headphones and the remaining 2 for the mic, I can simply cut up the wire right after the mini USB port and connect the 6 wires to a standard cell phone headset 2.5mm connector then I should be able to connect the TyTN to all kinds of headsets![/img]
Arent you essentially doin this? http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html as seen in another post, seems like the most universal way to solve the problem.
I do like the way you built a set without a plug, cleaner..less cord and weight, but I know myself, I go through a pair of headphones about every 2 months on my mp3 player, Id hate to have to redo the soldering everytime, I expect with the headphones being such an issue for most peple that the market will be flodded in a month or so with headphones for the tytn, or atleast adapters, shoot, the one guy in the above url even offered to do it for free, as long as you bought the plug.
is there still no adaptor available to buy?
i just do this way........
can swap any earpiece....
crash74 said:
i just do this way........
can swap any earpiece....
Click to expand...
Click to collapse
@crash74
Looks very good, even more solid than the other solution, but how do you open the unit to reach the print, is their any trick?!
Can i also use the new connection as a line-out for little active stereo boxes, or is this to tricky for TyTn/boxes?
worked like a dream i have no more crapy hissing inbetween tracks and now i can play my song thu my hi-fi that 1 to the modders and 0 to htc
Adapter usb to 3.5 jack
Go to semsons.com, they have the adapter
qing84, I have the same headphones as u=) firstly I solve this problem like you, but I smash the small "black box"=) with mic and volume control, and i was need connect my mdr-ex71 directly to TyTN without "black box"=(
I was glad that i did it, because sound became much more louder, and more clean...
qing84 said:
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Click to expand...
Click to collapse
umm...you could have just bought this.... http://www.cellphoneshop.net/auadforci85.html
i think its a good idea to replace the head phone leaving the mic in workin condition.as there is no connector is still available at least in my town.i ll try it tomorrow.thanx dude
Hi,
My Vario II justification to the misses was that we'd be able to listen to music in the car with it (our CD player is dead).
Has anyone come across an FM transmitter that you can power from the car cigar lighter and plug directly into the mini usb socket on the TyTN?
Cheers,
Steve.
I'm looking for the same thing
I bought a SONY MEX5000 BT stereo that uses Bluetooth streaming. It is so cool! much better quality(sound) then the radio ones. I dont carry CDs anymore just everything over BT with MP3s.
FM Transmitter w/car charger
Have a look at this:
Audia-x FM Wireless transmitter Version 2
_http://www.merconnet.com/product_info.php?products_id=426&page=1&meRrid=62fb2de7fd3cc8773287b55f5251c89f
and
_http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=85
and Car FM Transmitter + USB Charger Adaptor
_http://www.tangshop.com/mp3-fm-transmitter-usb.html
_http://jpshk.trustpass.alibaba.com/product/11038314/5_In_1_FM_Car_Transmitter_For_Ipod_PDA_MP3_Players.html
_http://store.l-f-l.com/cgi-bin/cp-app.cgi?pg=prod&ref=FM-TRANSMITTER
Google rulit nepadeccki :-D
lvlx said:
Have a look at this:
Audia-x FM Wireless transmitter Version 2
_http://www.merconnet.com/product_info.php?products_id=426&page=1&meRrid=62fb2de7fd3cc8773287b55f5251c89f
and
_http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=85
and Car FM Transmitter + USB Charger Adaptor
_http://www.tangshop.com/mp3-fm-transmitter-usb.html
_http://jpshk.trustpass.alibaba.com/product/11038314/5_In_1_FM_Car_Transmitter_For_Ipod_PDA_MP3_Players.html
_http://store.l-f-l.com/cgi-bin/cp-app.cgi?pg=prod&ref=FM-TRANSMITTER
Google rulit nepadeccki :-D
Click to expand...
Click to collapse
and how to connect ?
--> no way @ this moment ...
Try Nokia HS-12W. Google to see how it looks like.
It is a bluetooth Stereo Headset which you can listen to MP3 played from Tytn.
It is also a standalone FM Radio by itself without the Tytn at all.
I have one, cool.
Hi and is there a bluetooth receiver taht one can plug into a stereo ?
HS-12W is a Wireless (no wire between it and phone) Stereo Headphone via Bluetooth with Build in FM Radio.
What I meant about the bluetooth reciever is if there is one that tha pda streams music and is recieved by a device that can be plugged into the home stereo, same principle as a headset only differance is that it'll go to speakers.....hop I made it clearer this time... or maybe it's that I am not gettin it jaja
You are refering to Home Stereo Hi-Fi Amplifier/Receiver to speakers. Well it is something I was thinking about some years ago when I first read the white paper on Bluetooth v2.0 A2DP Profile.
But Hi-Fi industry in term of following latest trend is normally a little slower than the computer & mobile industry. So far, not that I know of that there is a build in Bluetooth Hi-Fi system including speakers. Maybe it is time to do a google on this topic, it would be good if there is such solution to get rid of the messy wire connections.
I do know that there is such thing as Bluetooth Donger, which is a bluetooth device with a headphone jack and you can plug the headphone jack into the Hi-Fi headphone jack and bingo you have wireless music with you wireless headphone, but bluetooth is quite subject to surrounding interfence, so you may have broken music in your ears.
The is also some not so good old technology using Infra-Red. The better ones are the wireless headphone sets using RF frequency which you can listen to music even you and your hi-fi are in different room.
Hope I got your question right this time.
Hey CWKJ,
Thanx for your reply. Look at the following link:
http://www.expansys.com/product.asp?code=130588
It's a bluetooth speaker, but what I am looking for is something that can make any car home stereo into a bluetooth reciever...
You mean something like the Tunestage II for the iPOD?
http://www.techdigest.tv/2006/10/belkins_tunesta.html
I'm looking for something similar that will plug into a car stereo - i.e. a bluetooth receiver which will plug into the external input of my car stereo, so I can stream to it from my TyTN - anyone know of anything?
PS Yes, I have seen the Parrot MK6000, but I don't think its out until Q1 2007....
BINGO!! Yes like this, only that you don't need the transmitter (tytyn would be it!).
check out the I-Tech S35 clip. A2DP receiver with a 5mm headset jack. You can cable this to your car with an adaptor cable. The I-Tech doesn't skip either!
Yes! this seems to work! jajaj do you actually use it? or know of someone that has used it with this purpose?
Once again thank you for your responses!
I've not used it myself for this purpose. I've no doubt that it will work though. What I am interested in is the usable range. The applicaton I have in mind will require 4-5 meter range from the I-Tech device to my TyTN.
C.R
Ok, you are talking about car hi-fi system, the speaker looks good.
For Home hi-fi system, maybe there isn't bluetooth audiophile speaker yet.
For the car hi-fi system, there are some with the audio output (the Left - Right or White - Red cable build-in type audio output cable). Buy another cable adaptor (Left - Right/White - Red to stereo headphone cable) and the Bluetooth Donger, connect them up and you will have the audio on you bluetooth speaker. Hope this works!
Hey! look at this:
http://www.engadget.com/2006/10/12/sony-goes-ape-with-a2dp-stereo-bluetooth-accessories/
Sony always has great product.
November 18 in Japan? If so, wondering when it will be available in other parts of the world?
I already found some for sale in ebay!! wow!
I found this Bluetooth car unit last weekend and would like to share with you all.
In my own experience, this is the best one I ever tried.
LiquidAUX™ Bluetooth® Car Kit
http://us.kensington.com/html/14484.html
I got it for total $75 in Comp USA. This unit plugs directly to car cigaratte power plug, and the 3.5 mm audio jack plugs to your car AUX port. Yes, its designed for car stereo that has an audio AUX plug. I know there are some products that also integrate FM transmitter for feeding the audio to the car stereo, and I have tried those, but this one is much better if your car has an AUX input and you simply need to add a bluetooth connection to your phone.
The microphone is very good, even though my power plug in deep buried, and I was thinking to extend the plug with an extension cord, but indeed it still works well.
It auto connect to my HD when I turn on the car, and it transmits both phone and music (A2DP) with a very good sound quality.
It comes with a remote control that you can tied to your steering wheel to make it even better. Our HD does not have a DPAD and controlling music playing has been a challenge in the car. With this remote, all those issue no longer there.
I used to use a direct cable connection to connect my HD to my car stereo, and sometimes when I simply forget or feel lazy and just want to go right away, I will not be able to accept call or play music from my HD. With this BT connection, when I walk in to my car and switch it on, it auto connects to the HD, and the remote works right away to start playing music or make a phone call.
The previous BT dongle I used to have, such as the itech BT dongle, or the Jabra BT dongle, I always have issue to swith them on, swith them off, and sometimes it does not connect, and then have to remember to charge them once in a while.
With this unit, I don't have all of those issues, and it simply merges together nicely with my car stereo as if it has BT integrated.
I highly recommend it, if you have a AUX port in your car stereo. If you have a casette player, it should work also, but you would like to use a coupler to connect the both 3.5 mm audio jack together.
I got one of these from for about £40 from Amazon, but I had the problem of the cig lighter always being on show, which was annoying.
I go this handsfree kit, http://www.parrot.com/uk/products/hands-free-car-kits, which is by far the best I have ever used. Has full iPod support, 3.5mm jack and usb support.
Full colour screen and phonebook storage / voice dial.
nicelad_uk said:
I got one of these from for about £40 from Amazon, but I had the problem of the cig lighter always being on show, which was annoying.
I go this handsfree kit, http://www.parrot.com/uk/products/hands-free-car-kits, which is by far the best I have ever used. Has full iPod support, 3.5mm jack and usb support.
Full colour screen and phonebook storage / voice dial.
Click to expand...
Click to collapse
a parrot that works well with a smartphone?! really...? I'd heard nothing but bad about probs with the old touch dual i had - has this been fixed since & works with the HD then? if so i'm in...
Lord of the Badgers said:
a parrot that works well with a smartphone?! really...? I'd heard nothing but bad about probs with the old touch dual i had - has this been fixed since & works with the HD then? if so i'm in...
Click to expand...
Click to collapse
Yep, parrot really works fine both with my HTC Touch Cruise(P3650) as the HTC Touch HD
I use the xcarlink USB/SD adaptor with bluetooth module. It plugs directly into the CD changer port of the stereo, allows me to charge my phone via the USB port whilst streaming audio through the bluetooth connection. Audio auto-pauses when I receive calls, which also use the stereo speaker system and music functionality is controlled via the normal stereo controls or the cars steering wheel controls. Track time, etc., is displayed on the normal car stereo display.
There are a few functionality niggles, but they are easily overcome with a dash mount for the phone and a skin for mobile media player that has large buttons. I designed a skin, just for use in the car, so everything is really easy now.
Hi all,
Can the TP2 support headphones from the iPhone? By that, I mean controlling the phone and mic coming from the 3.5mm jack?
If so, can anyone suggest a set of buds that work well?
Thanks1
Well, I answered my own question today. iPhone headset plays back audio, phone calls, but the mic does not work.
So we're still left with the question: what headset will work?
i am using HTC RC E100 as headphone adapter. It's remote controller with 3,5mm jack on it... pretty cool thinngy but with pretty ****y cable (
ditto the HTC E100. Controls plus mic. I soldered a pair of etymotics drivers onto a shorty 6" cable that allows me use with the TP2 (via the E100) or my ipod (via a headphone extension).