Hi everyone, i'm looking for help again
This time, i've flashed to AKU PDAVIET and when i loaded (windows screen) the Upgrade.bat, the MS DOS command bugged after some time and now the S200 won't boot.
I just got the start menu with the version of ROM, EXT ... the wallpaper by Orange but it won't go any further.
I can't find any active sync connexion (hard reset does not help)
Does anyone know what to do to PLZ ?
go to the boatloader (reset while holding camera button) and try flashing again
THKS will try that tonight.
Now i remeber that i had do it with my Himalaya
did you downgrade to WM5 before flashing?
Nop i upgrade to AKU 2.2 and then i try to run the upgrade.bat wish work for a time...
Related
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Don't know for sure that it will help, but when you want to connect to your PC in USB mode (bootloader) you should first disable "Allow USB CONNECTION" in the conections settingpanel of Active Sync.
thanks i'll give it a try
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Try to search the new ROM update utility and try to reflash using it.
pda is dead
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
dj00912 said:
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
Click to expand...
Click to collapse
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
chavdar said:
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
Click to expand...
Click to collapse
It's beter NOT to use any backup software when you migrate from WM5 to WM6 or the other way around. Sync first with your desktop ans sync back after upgrading. The standard location are not the same, so it is messy when you replace the files to their original positions.
Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked
2 hits
http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."
if you're lucky
http://forum.xda-developers.com/sho...t=Failing+ROM+Update+Jam.+Error+112+CE+Failed
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"
if you're unlocky
Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
Why Can I only update RADIO and Extended Rom, while CE Rom not?
... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?
No news? I'm so sad
hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- **** this wrong rom and search for normal rom for himalaya ->
take this one :
"
mirror in china ,but very rapid downloading
http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032
enter the code e506cd02 then go
thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/
cheers
Dear All,
Please, please help me to fix the problem continues boot looping after update from AP4 to Michyprima ROM WM6.1 MULTILANG R6.1 Manila Edition (SPL 1.2 and 3.5)?
After the progress bar of flashing ROM completed, the device was started with scattered screen of RGB (like broken TV), different from the time when I was flashing AP4.
During first booting, the device always restarted after everytime I choose the font between Tahoma and Vista Font.
How can I fix this? Thanx a lot for any help!!!
=Tim=
After I've checked, I think I know the caused of problem; I was using Michy SPL 1.2 instead of SPL 3.5.
My Device is using SPL 3.5 (I know this by pressing camera button + reset button), the tri-color screen appear with text:
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
But anyway I don't know how to fix this,
anyone please help me to restore my device again??
Many thanks in advance.
Tim
First get proper ROM.
enter bootloader using this method: To enter Bootloader press and hold the camera all the way in and press the reset button
Hook up cable and run update utility.
Finally, it works!! Many thanks to you, my Athena is now alive..
Now I'm using SPL 3.5 with Michyprima's ROM, it is fast enough to navigate.
however still, the Wifi is not working..
is that cmonex solutions fit in my case?
again many thanks to you.
Hello, this is my first post.
I have bought an SPV M3100 (HTC Tytn). It is my second WinMo phone with touchscreen (first was Eten x500). I've unlocked it (SIM and SuperCID). I've seen here some WM6.5 roms, but they ware moded. I want a CLEAN (original) version of WinMo 6.5 (to customize it myself how i like). I want the WWE version (Romania).
Also, I want to know if WinMo 6.5 have Mass Storage option for card, or i will need a 3rd party program (becouse i don't like ActiveSync) ?
...
Great comunity here
georgik ce faci tata...nu-ti raspunde lumea?
w3b3r said:
georgik ce faci tata...nu-ti raspunde lumea?
Click to expand...
Click to collapse
NU
ooo fratsilor!!!! romania? moldova?
help please
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!