Related
Hi everybody, I am a Hongkonger.
I have seen many posts in this forum, but I cannot find a post which can give me a full process to Unlock the sim and get the radio function and any other things which I can do to make my x01ht more powerful.
Can anybody can post the whole process and the website where can the software be downloaded to help me finish what I want? I think it also satisfy the other users, thx!
PS. Sorry for my poor English.
Sorry! I have missing some information.
If my Softbank x01ht is Janpanese version, how can I change it to English or Chinese version? Pls also tell me the solution about this, thx a lot!
fai0818 said:
Sorry! I have missing some information.
If my Softbank x01ht is Janpanese version, how can I change it to English or Chinese version? Pls also tell me the solution about this, thx a lot!
Click to expand...
Click to collapse
the solution is simple.
go to this site;
http://www.imei-check.co.uk/m3100unlock.php
buy the key file for your device and download the unlocker.
follow the instruction on the site to unlock your phone.
choose a rom you want from here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
just burn it.
i am not sure if you can change the radio rom on your x01ht.
read and search in this site more. everything and every detail has been already discussed here.
@qtotter
even the bootloader 1.09 is downgraded using imei-check's website ????
I dont think so.
sohaibrafiq said:
@qtotter
even the bootloader 1.09 is downgraded using imei-check's website ????
I dont think so.
Click to expand...
Click to collapse
the answer is YES. actually, the latest version can unlock x01ht with BL1.09 downgrading to BL1.04 so that you can even burn any rom you want.
qtotter said:
the solution is simple.
go to this site;
http://www.imei-check.co.uk/m3100unlock.php
buy the key file for your device and download the unlocker.
follow the instruction on the site to unlock your phone.
choose a rom you want from here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
just burn it.
i am not sure if you can change the radio rom on your x01ht.
read and search in this site more. everything and every detail has been already discussed here.
Click to expand...
Click to collapse
I must but the the key file for your device and download the unlocker from http://www.imei-check.co.uk/m3100unlock.php?
If there any other software can also do the same but is free?
Pls tell me ~thx
qtotter said:
the answer is YES. actually, the latest version can unlock x01ht with BL1.09 downgrading to BL1.04 so that you can even burn any rom you want.
Click to expand...
Click to collapse
You mean when the PPC Phone is unlocking , at the same time the PPC Phone is downgrading?
fai0818 said:
I must but the the key file for your device and download the unlocker from http://www.imei-check.co.uk/m3100unlock.php?
If there any other software can also do the same but is free?
Pls tell me ~thx
Click to expand...
Click to collapse
you have to buy the key file from imei-check. there is no free way for x01ht so far.
fai0818 said:
You mean when the PPC Phone is unlocking , at the same time the PPC Phone is downgrading?
Click to expand...
Click to collapse
the latest unlocker for tytn from imei-check downgrades bootloader to 1.04, and then unlock the phone. when it's done, the bl version is still 1.04.
fai0818 said:
If there any other software can also do the same but is free? Pls tell me ~thx
Click to expand...
Click to collapse
Not yet.
If you want to SIM-Unlock your phone, you'll have to cough up the 20 pounds. A small price to pay, IMO.. I paid it back before pof's free unlocker was available, but the 20 pounds was a lot cheaper than having to buy another phone that would work with my Globe SIM-Card.
If you only want to change your ROM without sim-unlocking your phone, there is a way to do that, but you will be violating copyright, and I assume that nobody will be willing to send those files.
- awh
qtotter said:
you have to buy the key file from imei-check. there is no free way for x01ht so far.
Click to expand...
Click to collapse
umm... what about this way?
http://forum.xda-developers.com/showthread.php?t=284401
it looks like they've cracked it, but good luck on finding the necessary file
If you want to unlock the sim lock. Please goes to IMEI website. If you just want to change the ROM from Japanese to Chinese. You may study the FAQ or wiki.If you still got any problem, please post your problem here. I have done the same thing before. And I have almost sucessful. (Exclude I can't input the chinese.) Did anyone know what happen??
bludshot said:
umm... what about this way?
http://forum.xda-developers.com/showthread.php?t=284401
it looks like they've cracked it, but good luck on finding the necessary file
Click to expand...
Click to collapse
*sigh* please don't confuse people. what you are referring to is for the old x01 BL1.06. we are talking about the new x01 BL1.09.
as of 2/3/2007, you have to use imei-check unlocker to unlock x01 with bl1.09. there is no freeware yet.
oic~
but when i bounght the key file from IMEI, What should I do to change the ROM from Janpense to Chinese?
I have read a post as above which is not include to input the chinese? If yes, what can I do?
qtotter said:
*sigh* please don't confuse people. what you are referring to is for the old x01 BL1.06. we are talking about the new x01 BL1.09.
as of 2/3/2007, you have to use imei-check unlocker to unlock x01 with bl1.09. there is no freeware yet.
Click to expand...
Click to collapse
i remember reading(will link later) on here that when you run the imei check program that it copies the files to your device before it asks for the file, even with the newer version that is now available, which unlocks the newer phones as well... so it should follow that the same process with the newer version of their program will unlock the bl 1.09 phones as well, right? if no, then why not?
Hi
I cant downgrade my tytn to wm5
Somebody help me?
Thank you.
Please click on the mrvanx guide at the bottom of my signature the answers are there.
hi,
but where I make download the RUUWrapper.exe (CustomRUU by olipro)?
where is the download file??
?????????????????
PLEASE relax and read through THE GUIDE. All download links are there for you to use.
pauloinho said:
Hi
I cant downgrade my tytn to wm5
Somebody help me?
Thank you.
Click to expand...
Click to collapse
Have you simply tried downloading your carriers official ROM?
I tried the WM6 Black Dymond 3.5 ROM, and think because of some quirks I want to just load the Carrier ROM back uon. Do I need to follow this guide? or can I just re-flash back to the AT&T ROM?
Brese said:
I tried the WM6 Black Dymond 3.5 ROM, and think because of some quirks I want to just load the Carrier ROM back uon. Do I need to follow this guide? or can I just re-flash back to the AT&T ROM?
Click to expand...
Click to collapse
No, no need to follow the guide for what you want to do. Just get the AT&T ROM and flash it normally. Voila!
Sweet! That is some ingenuity!
when im tried to download it appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
Sorry for my english
pauloinho said:
when im tried to download it appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
Sorry for my english
Click to expand...
Click to collapse
What link are you trying? Send it over.
@TaurusBullba
If the OP updated to HardSPL the RUU exe wont recognise the SPL version and he will get a 260 error, also the possibility of a 'NO GSM' Brick is there if the radio BL has been updated to 108...the guide rebuilds the nbh into an OS only nbh and uses customruu 4.3 so the new SPL is detected and the current radio version is retained.....
... if the op hasnt updated to HardSPL they REALLY should before continuing :s
Ahh... good call. I hadn't thought about if he had used HardSPL.
You are the Guide Master, SirVanx!
Point taken and I now shall go hide under my rock...
mrvanx said:
@TaurusBullba
If the OP updated to HardSPL the RUU exe wont recognise the SPL version and he will get a 260 error, also the possibility of a 'NO GSM' Brick is there if the radio BL has been updated to 108...the guide rebuilds the nbh into an OS only nbh and uses customruu 4.3 so the new SPL is detected and the current radio version is retained.....
... if the op hasnt updated to HardSPL they REALLY should before continuing :s
Click to expand...
Click to collapse
LOL sorry, i was a tad crabby last night (no sleep).
@pauloinho
Have you managed to do it?
?
Please, don't beat me for my stupid and annoying question - trying to find this information, and not only me, but unfortunately without success
Is there some way, how to downgrade HardSPLs to normal SPL, f.e. 1.04, because of warranty?
If this was solved, please, give me direction
mrvanx said:
LOL sorry, i was a tad crabby last night (no sleep).
@pauloinho
Have you managed to do it?
Click to expand...
Click to collapse
Mrvanx send me the soft. RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool to my email.([email protected])
Thank you
pauloinho said:
Mrvanx send me the soft. RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool to my email.([email protected])
Thank you
Click to expand...
Click to collapse
Dude the software is linked to in the guide, if you READ IT you will find all you need.
mrvanx said:
Dude the software is linked to in the guide, if you READ IT you will find all you need.
Click to expand...
Click to collapse
How????
The RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool link is not working
It appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
try again now
mrvanx said:
try again now
Click to expand...
Click to collapse
Tanks mrvanx,the Custom RUU V4.3 its workin.
But the dutty's good NBHTool v1.1 still not working, appears this message"You do not have the required permissions to view the files attached to this post. "
Hi to every one...
I have Qtek 9100 G3 and I flash that device and it's working GREAT, so I wrote a little tut on my language...
Now my friend asked me to put that NBD v9.1 ROM but he have G4 device and I don't want to brick it with doing something wrong.
I saw CID unlock tutorial but still afraid to flash...PLEASE HELP!
How to flash it safely and how to put NBD v9.1 on G4, or is this even possible?!
Thanx in advance...
You'll need to use shelltools to flash that.
How can I check if my device is CIDlocked or unlocked...and is this important if I use shelltools?
Also can you tell me how to flash my device with shelltools and where can I find necessery files?
One more question...after I use shelltools, can I use that NBD 9.1 version from the link or is this version just for G3?
Thanx in advance!!!
w_w_w said:
How can I check if my device is CIDlocked or unlocked...and is this important if I use shelltools?
Also can you tell me how to flash my device with shelltools and where can I find necessery files?
One more question...after I use shelltools, can I use that NBD 9.1 version from the link or is this version just for G3?
Thanx in advance!!!
Click to expand...
Click to collapse
Dont attempt that CID unlock procedure with a G4, otherwise you will permanently brick your device.
If you want to check whether your device is CID locked then go here.
Read all about upgrading the OS on your device using shelltool here.
Thanx...for quick reply and help...
1. I started bootloader but where is that "Open mtty.exe" file?!
2. In that upgrading OS with shelltool link, I can't download those files becouse I can't see them in attachment and FTP link doesnt work?!
w_w_w said:
Thanx...for quick reply and help...
1. I started bootloader but where is that "Open mtty.exe" file?!
2. In that upgrading OS with shelltool link, I can't download those files becouse I can't see them in attachment and FTP link doesnt work?!
Click to expand...
Click to collapse
mtty.exe should be on the ftp site. I've attached shelltool to here and mtty.exe to here.
Thank you veeeery much...
Just one question...after I use shelltools, will I be able to use this ROM (NBD 9.1) to flash on G4?
w_w_w said:
Thank you veeeery much...
Just one question...after I use shelltools, will I be able to use this ROM (NBD 9.1) to flash on G4?
Click to expand...
Click to collapse
Yes you will be able to flash your CID locked G4 with NBD. Just read as much as you can from the shelltool thread and follow the directions closely.
Good Luck
Thanx... I will try...
rhgafdhafd
Hi dudes ,
I got JASJAM with simlock to Cellcom company (Gsm network in israel).
What is the easy way to do that ?
(i dont want to do flashing or something like that)
thanks for the help
use the free unlocker
here is the link
http://forum.xda-developers.com/showthread.php?t=293665
nsaneasylum said:
here is the link
http://forum.xda-developers.com/showthread.php?t=293665
Click to expand...
Click to collapse
is it so easy as said?
yes the instructions are inside the zip
if i want to only do unlock , so i need to upload the "Herm_Unlock_v3.exe"
to the device and run it ? Or , still i need to use the auto install?
thanks again
unzip it and read the instruction text inside
i used gene_hspl.exe ,now phone dead ,
phone is Indonesia,
now phone is boot-modes
spl-is Olipro
need Indonesia Original rom
thanks
i am so sorry
do you get " GET NEWER UPDATE UTILITY" error if yes as if now nothing is going to help you no original roms , no mtty, no flasher
mailforkrishna said:
do you get " GET NEWER UPDATE UTILITY" error if yes as if now nothing is going to help you no original roms , no mtty, no flasher
Click to expand...
Click to collapse
i flash gene indea 1.17.720 rom,error[300]:INVALID UPDATE TOOL
SO I NEED Indonesia rom,my phone is ideonesia
from my experience i can say whatever ROM you use it will give you same error.
Because hard spl have erase the model identification from you phone and update utility can not check whether this utility is ment for this phone or not so it count it as identity mismatch and quit with error
mailforkrishna said:
from my experience i can say whatever ROM you use it will give you same error.
Because hard spl have erase the model identification from you phone and update utility can not check whether this utility is ment for this phone or not so it count it as identity mismatch and quit with error
Click to expand...
Click to collapse
First of all, I thank you for your reply
Now I need how?you can save my phone
Sorry
songyang1109 said:
First of all, I thank you for your reply
Now I need how?you can save my phone
Click to expand...
Click to collapse
Sorry to say as of now NO SOLUTION i wrote all senior member of the forum but no reply .
We may pray for our GENE
mailforkrishna said:
Sorry to say as of now NO SOLUTION i wrote all senior member of the forum but no reply .
We may pray for our GENE
Click to expand...
Click to collapse
We may pray for our GENE