Ok guys please be gentle, ive tried searching and posting previously with no success.
I have purchased a 2nd hand Wizard which is an O2 badged sim unlocked unit being used with an Orange sim. I know I have a G4 device from following the guides and I know that somewhere on this site there are links to manufacturer roms which I will need before I can start playing, I just cant find them.
So....
Can someone please provide a link to the latest WM5 Orange Rom and is there a WM6 manufacturer version that will work with the CID locked G4 device?
Thanks
You sure first SIM unlocking your G4, then use shelltool to flash a WM6 ROM as you wish (No official WM6 ROM is available, and will never be).
Since it's a O2, you can revert to WM5 (That is needed when you need to flash other WM6 ROM) by using official RUU for O2.
Thanks, I take it there isnt an official orange wm5 to restore it back to available then? Is there?
To be honest I would have liked to start by just going from an O2 rom to an Orange one and then upgrade to wm6.
Related
I flashed my tytn tmobile dutch phone to the cingular 1.34 but want to go to the original english Tmobile rom (no problem with vender id)
any one has the original rom available for me?
This cingular rom freezes the phone often!
Often, you can't upgrade until an official ROM was made by T-Mobile.
As far I know T-Mobile hasn't made ROM upgrades yet.
I could be wrong though, and interested in such an upgrade.
Every few hours my phone now is stuck!!! I hate this rom and videocalling is off....
I made a mistake upgrading to bootloader version 1.06... I need an official rom now...
Is there any other way?
Tnx!
Check the wiki, there are a some roms available there.
you cant flash another rom since the 1.06 bootloader enforces Vendor ID checking! otherwise i would have changed allready....
ive got a friend with an imate jasjam and i was just wondering if it came cid unlocked...
if so, how would the cingular rom run on it considering it doesnt have video call function...
please let me know
any recommendations for best rom??
Hi,
maybe its SIM unlocked, but it wont be CID unlocked unless you have patched it. if so, then you can instal any rom etc, but first read the wiki to familiarise yourself.
if you have a jasjam in australia (telstra rom), you will first have to downgrade your bootloader to 1.04. you can do this flashing the WWE shipped rom (see the wiki). Once you have boot loader 1.04 then you can CID unlock.
caution: it may invalidate your warranty to CID unlock your pda-phone.
what about a recommendation for the best rom? i just got my JasJam about an hour ago
not sure about that, there are mixed feelings.
I personally use the WWE JASJAM Rom, (originally had the telstra ROM) and I find that it is stable and works well.
I am not ready to make it super CID to explore other ROMS at the moment as 1) I cannot afford to invalidate my warranty (currently on my 2nd device) and 2) too busy with work and now holiday season to spend time playing with it.
I played around with it alot when I first got it but now I require my device to be transparent in what I do, hence, just use the damn thing.. I think the novelty is wearing off and now I am using it for what it is.
However, I will upgrade the ROM when AKU3.2 comes out, hopefully sometime soon.
Hi comm!
I have a T-Mobile MDA Vario II, Rom Version: 1.21.
Can i upgrade my PPC with the released WM6 update of HTC without any problems, although i have a differently branded TyTN? Will all functions work (telephone, internet)? And can i downgrade my WM6 to WM5 easily or can I reactive my current system status with a backup (SK Tools)? Last but not least, what will the warranty say?
Thanks for your efforts.
PS: sorry for all these maybe stupid questions...but i´m just a beginner =)
upgrading to WM 6 worked for me as did unlocking ;-)
If you do not use an official T-mobile ROM update forget any warranty, unless you're able to downgrade to the original one
I have an original Rom from T-Mobile. Do you know what happens with the warranty of T-Mobile when you unlock the CID? Does the CID still will be unlocked if you install another Rom? Can you lock it again?
It won´t be possible unless you downgrade to your old ROM again. I am not sure if that´s possible, though.
I went along the way described at http://www.mrvanx.org/cms/index.php...ask=view&id=65&Itemid=26&limit=1&limitstart=4
If you follow the directions including the upgrade to wm6 from Custel, you can afterwards install the German WM6 version from HTC. It won´t work directly. The CID will stay locked and the HTC cannot be installed until you installed the CUSTEL version.
I think the T-Mobile contract does not allow to modify the system in this way.
How to
Using the search function gave me thread as the first result.(Couldnt find any how to guides)
So.. What do i need to do to upgrade my ROM? i have a fresh MDA vario II just got repaired from the shop.(Nothing to do with bricking if you;re wondering)
Can some one please give me a simple step by step guide on how to upgrade.
Thanks a bunch
HELP
i have 8525, and i installed WM6, with different applications and i cant get the voice dial to work and cant find any applications or roms, does anyone know how i can get it to work?
help, i have just got an ameo and previously had an xda exec, which i unlocked,then a Mda pro(universal) and installed wm6 which works great compared to wm5, i have tried using olipro unlocker on the ameo... an had an error message at stage 1 flash SPL....TRIED IT TWICE AND the phone is completely dead... doesn't charge or switch on .. i have unlocked and upgraded on two models so i do have a clue.....i should be getting a replacement, but really need to run it on wm6 as i believe it works a lot better as with my Mda pro.
could you pls tell me which is the right toolor a link to unlock and upgrading Ameo (uk) to wm6.There are so many threads i cant tell which tools have been tested and works....Can afford to brick the new one
Many Thanks for your time
email or IM to [email protected] i'll show you how to do it !!! If...i'm there
digigem said:
help, i have just got an ameo and previously had an xda exec, which i unlocked,then a Mda pro(universal) and installed wm6 which works great compared to wm5, i have tried using olipro unlocker on the ameo... an had an error message at stage 1 flash SPL....TRIED IT TWICE AND the phone is completely dead... doesn't charge or switch on .. i have unlocked and upgraded on two models so i do have a clue.....i should be getting a replacement, but really need to run it on wm6 as i believe it works a lot better as with my Mda pro.
could you pls tell me which is the right toolor a link to unlock and upgrading Ameo (uk) to wm6.There are so many threads i cant tell which tools have been tested and works....Can afford to brick the new one
Many Thanks for your time
Click to expand...
Click to collapse
If you have bricked one device don't try it again. There are issues being worked out with the unlocker.
Second, there is a ROM you can use for your Ameo that should install without being unlocked and based on WM6. It's on the forum somewhere. I don't remember where it was posted so you'll have to search.
Let us know how it goes....remember you don't need to unlock if you find the right ROM...the WM6 ROM for an Ameo/Tmobile device.
Thanks people. T-Mobile can go to ....
On my third Ameo running wm6 pro.olipro unlocker v2 should do the job i heard but intsalled the rom which run on t-mobile ameo. Dont know what the difference with the black touch version is ... i cant complain ..well for the moment . Thanks again People!!!!!
The T-Mob ROM works without unlocking but Olipro V2 worked fine on my UK Ameo which allowed me to install Black Touch which, thanks to PK and the team, is far better.
my cousin has 2 orange spv m3100 and was thinking about upgrading them to windows mobile 6 or 6.1 depending on rom's available
is this easily done?
and would it be best to unlock the phone so it can go on all networks before the rom update or after it?
all advice would be great thank you
Upgrading your device's rom is quite easy after youve done it once, just check the wiki page, upgrading for beginners this should tell you all you need to know about flashing a rom for the first time.
Have fun
cheers scotty
we're guna havea play about with both of them next tuesday/wednesday when we're both free
maybe unlock teh sim so it goes any network aswell
another quick question
do you know if the latest rom on there for the orange spv m3100 is a wm6 build?
no there wasnt a wm6 released for the spv m3100 the actual newest orange rom is a update on wm5 it is in my uploaded file i think if you want to have a look, i used a cooked rom after hard-spl and super cid everything works fine and i have flashed quite a few roms.
Have fun
thanks
do you know of any wm6 roms for the spv?
or if i got the phone unlocked and used a vodafone sim in it would i be able to flash vodafone roms or would i still have to use the orange rom?
James, going to your original question, I've recently done this myself, and over the past week, i've flashed my phone numerous times, so its very easily done.
Just read the guides, and make sure your 100% confident that you've understood it, I did and i'm 100% happy with the outcome!
Thanks Greeee
did you flash a wm6 or a wm5?
cause it comes with a wm5, but wanna updte to a wm6
Tbh, I should've explained something...
My phone is the HTC Hermes 200, not the SPV M3100, although they are the same phone, mines not branded by any network.
It was shipped to me (Bought secondhand) as WM6.1, so all I did last week was updated the HardSPL and since tried a few roms.
I didn't have to use SuperCID, to unlock mine, as it was unlocked, but I do wish you well buddy, and word of recommendation, try not to use branded software on phones, as they bog them down with too much bloatware, stick with what you like.
If need be, I'll help where I can, but tbh, your in safer hands with everyone in here, as all I did was read the guides, and stuck to what was being advised.
The people here are good, which makes it so much easier to use!
cheers Greeee
well im thinking of getting it unlocked before i do anything to it anyway, when using roms without a specified carrier does that mean i can use any rom or is it best to stick with the operator specified?
if you super cid you device you can use any rom that has been cooked or from any carrier as it is basically a unlock for that a bit like a sim unlock. most people use the cooked roms by the chefs in the wm6 part of the forum where there are wm6/6.1 and 6/5 roms that have been cooked and have different features so you will probably have to do a bit of flashing and some looking around before you find a rom that is best suited to you.
If you have ne more questions just ask, Have fun
cheers again scotty
super cid, that easy to do?
just like flashing?
and could i sitll use any carrier rom even if i got someone at a shop to unlock my phone to any carrier?
super cid an sim unlocking is different to flashing i think i dont really remember
wiki on sim an cid unlock here
and a thread here
hope this helps and saves u paying to have it unlocked good luck
yer unlocking and super cid are dif to flashing
are super cid and unlocking the same you know?
cheers for the links, i'll try saving some cash now
no problem and they both come in the same program you just choose which one you want to do both.
Good luck
whats teh splbootloader thing what i been reading about?
it says you need to install that or something :s
do you mean hard-spl?
yer thats what i mean
you will need to flash version 7 2.10 after the sim and cid unlock this prevents your device from bricking if a flash goes wrong
cheers
so sim/cid unlock
then flash hard spl 7 2.10
then flash my rom?