Downgrade to WM5 Asia ROM problem - JAMin, XDA Neo, S200 ROM Development

Dear all,
I was upgraded my Prophet to WM6 b4 version,
and I want to downgrade my phone to WM5 Asia version now.
But the process is terminated at 95%.
I think that there maybe SPL version problem. The version number of SPL is 2.15.0000 before, and now is 2.20.0000
Is it possible to making a custom asia rom (nk.nbf) with SPL version 2.20.0000 by myself?
Anybody can tell me how to getting start and what's the tool I need to have?
Thank you very very much and sorry for pool english.

Related

Bootloader upgrade can it be done

Does anyone know how to upgrade the bootloader on an xda2. Have a number of units with old roms (1.02) which we want to upgrade to 1.72 rom image. The rom updates but not the bootloader. Problem is the unit i use to build the rom images i use is a 1.02 bootloader and a desperatly need to upgrade this.
hi,
strange...
I have bootlooader v1.01 and I had these opsystems on my device with no problem:
v1.3 ger - o2
v1.6021 wwe - qtek
v1.6036 wwe - t-mobile
v1.66130 wwe - qtek
v1.72126 wwe - imate
v1.72187 wwe - o2
v2.0600 wwe - o2
and now win2005 mobile
so why would / want to upgrade?
afaik higher the bl version harder to downgrade / play around (correct me if I am wrong)
regards,
ym
http://forum.xda-developers.com/viewtopic.php?t=12898&postdays=0&postorder=asc&start=75
See my post, it's for WM5 but you can read the topic!
bootloader version
Thanks for the reply, its not the splash screen but the bootloader version i need to change and be able to upgrade at will.

Upgrade Softbank X01HT to WM6

Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!

Upgrading to Official Vodafone DE WM6 Rom

Hi all,
i am currently runnig Schaps ROM and have HardSPL from Olipro installed.
What do i have to take care when i want to install the official released WM6 ROM from Vodafone?
I will not be able to simply run the exe because the SPL will be overridden or is this no problem?
Can someone tell me what i have to do to not brick my VPA??
Thanks in advance,
Hype

WM5 downgrade http://www.mrvanx.org/

Could anyone provide me with info on how to downgrade to WM5? I need to do this for warranty purposes. The guide isn't online anymore for a few months at http://www.mrvanx.org/.
I would like to downgrade my wm6.1 to wm5 or wm6 (official roms T-mobile NL).
Thanks for your help
Since the guide to downgrade is still offline, I don't know how to handle.
I have searched the forums, but everyone keeps on linking to this guide of mrvanx.
I found this thread where mrvanx provides
this link to download SPL 1.10.oli. Since I understand I will first have to flash to 1.10 olipro before flashing the factory default SPL.
After I have used this I keep on getting ERROR [260] : UPDATE ERROR
Can anyone please tell me how I should downgrade my Device?
I have WM 6.1
Radio version: 1.54.07.00
And still 2.10 olipro
thx
I stuck there now.
No guide for downgrading to WM5,
My phone is dopod 838pro, and SPL now is 2.10 olipro
Anyone can tell me where to get it?
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes

update x7500 problems

hi friends
when I try to update my pocket pc to wm6.1 spl 1.2 or flash spl whit athena unlocker it breaks at 1% during the flash and dont let me to unlock it or upgrade it what can do please help me
thanks alot before for your helpful information
my phone information
wm5
spl 1.07
rom version 1.25.409.2
radio version 1.38.00

Categories

Resources