Related
where can i get a black herme housing ?. I want to replace the boring gray housing that the 8525 came with.
Looking for the same thing!
Anyone with some suggestions?
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
wratran said:
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
Click to expand...
Click to collapse
Dont mean to bother, but just wondering if there has been any success? Im really interested in this mod.
wratran said:
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
Click to expand...
Click to collapse
Have you tried it yet?
I just ordered a new Hermes Replacement housing from cnn.cn, however I haven't received it yet.
If you are ordering one just make sure you order the right one for your phone.
For instance, the TyTN replacement body will not work on a 8525 and vise versa...
invictive said:
For instance, the TyTN replacement body will not work on a 8525 and vise versa...
Click to expand...
Click to collapse
I was looking over the cnn.cn and from first looks, it seems like the 8525 OEM black housing will work with the TyTN phone.
Is it confirmed the two will not work with one another? They are the same identical phone but with out the front camera on the 8525. If anyone will or has tried let us know.
I haven't tried, but I doubt it would. If you compare the positions on the different buttons - you can see that it the buttons doesn't correspond on the two different models. I'll buy the housing for TYTN to be sure it fits.
Wonder if they supply a instruction manual with it... Anyone knows?
The 8525 case that cnn.cn has for sale shows a front camera hole but no video call button which is something I would prefer, but where do you get the d-pad from? For those looking for a disassembly of the hermes have a look here on the wiki.I think there could be a really good combination of part to make a really nice looking hermes.
Dangnabbit.
I just ordered that Black Housing, but didn't notice the lack of a video call button. I hope it wont matter during installation on my Xda version
I've replaced the housing on my Vario ii for that of an SPV M3100 with no problems whatsoever - it was really quite straightforward. I kept the t-mobile directional pad as I preferred the look of it.
Changing the housing on a model of hermes with a different layout however is not so straightforward as it involves not only changing the keypad itself but also the little pcb underneath which is slightly different between Herm models.
it is certainly possible to replace the slide mechanism, keyboard and backplate between ANY model of Hermes, and some nice combinations are possible. I have a vario ii orange backlit keyboard if anyone wants it.
chinaonnitrous1!
Let us know how it went
Thanks!
they carried 2 housing...the only different is the key pad layout...so pay attention to the key pad...
This company is very slow in responding to email. I send them 2 email about a week ago asking for shipping date...yet no respond
Thats interesting, I ordered something from them on thursday, I got an email withing hours saying it had shipped with a tracking number...
As for the keypad layout, if you wanted to use the Black case you would have to also find the keypad to match it, as well as the PCB that goes beneath. cnn.cn has the parts for the TyTN, but not the 8525.
Maybe someone with good dremel and case modding skills could make it look good though.
Does anyone actually have the Black HTC TyTN that they were supposedly shipping? I was going to get one, but then everyone convinced me not too, I'd be interested to see some pics though.
I'lll get the housing withhin a week.
I'll post pics and everything.
chinaonnitrous1 said:
I'lll get the housing withhin a week.
I'll post pics and everything.
Click to expand...
Click to collapse
Thanks mate!
chinaonnitrous1 any news on how it went ?
I bought from http://cnn.cn/shop a case for 8525 and the external keyboard because I have a SPV M3100. I am waiting for the package and I'll put some pictures of the case. I hope the quality of the case is ok.
I just received my new TyTN case from cnn.cn. It is a dopod branded case, slightly different colour than my original TyTN case. I guess I would call the colour "graphite".
It is definately an original case off of a phone, it still has the old IMEI and Serial Number on the sticker on the back.
Build quality is good, it doesn't look like it is off a used phone. One thing I noticed however was that the silver metal on the front was slightly pulled up, and there were some adhesive remnants on the side of the case. I'm sure it will clean up fine with a little solvent though.
I haven't replaced it yet, I am waiting on a new keypad circuit board (mine is fried, you have to push it ridiculously hard to get it to work), and I will open it up then and replace everything.
Ordering from CNN.CN was pretty good. Shipping was $5 CAD, and it took about a week and a half to arrive. A signature was required, but there were no fees or duty.
leoni1980 said:
it is certainly possible to replace the slide mechanism, keyboard and backplate between ANY model of Hermes, and some nice combinations are possible. I have a vario ii orange backlit keyboard if anyone wants it.
Click to expand...
Click to collapse
Hi, I'd be interested in the keypad, if it's still available? I've dropped my VarioII and the keypad is slightly bent lol
where did you get the replacement body from?
Cheers
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
Need help!!!
Smashed my LCD and orded a replacement from HK. The part number they sent me was 60H00037-00M. After installing it, all I get is a white screen. Sent it back and recieved another one with the same number and again the same deal!!!
The part number Im chasing is 60H00056-00m or TX0704APAA1. I think it is a mfg by Hitachi.
I cant find anything with this part number on the net and was wondering if anyone knows if there is an equivalent that could be used insted.
Mal..
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
teknics said:
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
Click to expand...
Click to collapse
Teknics, are yoy refering to the two incy wincy screws that fasten the ribbon to the d-pad at the bottom?
Mal..
Yes that cable, but also make sure the ribbon cable that slides into the locking connector on the main board is in properly also.
HK?????
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
sllabymkcus said:
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
Click to expand...
Click to collapse
HK refers to Hong Kong you can purchase screens and digitizers that i know of but as far as small inexpinsive electronics i think your sol. just out of curiousity did you manage to blow the speakers or what? i have played some pretty loud music through my hermes using mortplayer and have not managed to blow them yet.
I have 60H00056-00m or TX0704APAA1 LCD.
msn:[email protected]
I am looking for a TX0704APAA1 for my HTC Tytn.
Apparantly this is the Hitachi model other models are also available on ebay (Samsung and Toppoly). As I understand Samsung and Toppoly are not compatible with one another apparently they use different controllers.
As for the Hitachi I have know idea whether it is compatible with Samsung or Toppoly, which is why I am on my quest after the Hitachi...
Anyone know where I can get one?
I think this one might work.
http://cnn.cn/shop/8525tytn-screen-p-1704.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
The 60h00032 or 60h00037 did not work on my dopod 838 pro.. I just got a white screen.
If you are looking to replace your 8125 case here's an excellent deal.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=360011196557&ssPageName=STRK:MEWN:IT&ih=023
I've purchased one of these and it includes all the buttons. The antenna cover already had the antenna installed. It even included the black rubber gasket around the display. All I had to move was the ear piece and the vibrator.
I don't know if they are take offs but mine was in A+ shape. They don't include the back cover.
Awesome!
Beats paying $50+ for a new shell...
My only question is; can you move the MDA circuitry to the 8125 shell? Seems logical, seeing as both are the same hardware.
Great find... They also have the wiz200.
thesebastiancat said:
If you are looking to replace your 8125 case here's an excellent deal.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=360011196557&ssPageName=STRK:MEWN:IT&ih=023
I've purchased one of these and it includes all the buttons. The antenna cover already had the antenna installed. It even included the black rubber gasket around the display. All I had to move was the ear piece and the vibrator.
I don't know if they are take offs but mine was in A+ shape. They don't include the back cover.
Click to expand...
Click to collapse
Too bad they don't ship to India...i'd really love to get a new housing for my trusty 8125 as i still intend to use it for sometime...maybe someone can help me out???
i buy from them mask for my qtek9100 and just to know this is old used,in verybad condition mask.Not new
hmm...
If anyone else orders from this seller, can you please post whether or not the parts are in new condition?
Thanks
madnesss99 said:
i buy from them mask for my qtek9100 and just to know this is old used,in verybad condition mask.Not new
Click to expand...
Click to collapse
I got the same housing from this seller and it's brand new! No scratches, no nothing. Just be aware that it does not include the battery cover.
joel32137 said:
hmm...
If anyone else orders from this seller, can you please post whether or not the parts are in new condition?
Thanks
Click to expand...
Click to collapse
I bought one from them and sent a message to them that there was a chip in the corner of one of the pieces.
In the auction listing, it states that they may come damaged but should not affect working order.
So...be aware that there may be cosmetic damage.
They were kind enough to send a replacement, which I should be getting in a few days.
Hopefully, it will be a new piece.
Update:
These guys are great....well in my case anyways.
In the previous post I mentioned that a had a chipped corner on the housing and requested a new piece.
Well, those guys sent out a whole new setup..this one was in great shape....dont know if it was new, but looks practically brand new.
There was never any questions on their end...they just sent out another one.
I would recommend them highly. Great customer support.
O btw, I told them I would send the original one back...they said to keep it.
WOW...top notch guys.
I just ordered one of those cases i'll make sure to let you all know how it comes when i get it!
Very Nice... there were a few minor scratches on the corners and buttons but other than that the housing i bought for my wizard was in great shape! no battery door cover tho
can some post a pick of the how the device looks in this housing?
got mine. no back cover, no screws. so what, do i use the screws from my wizard shell to close the new 8125 shell?
http://www.youtube.com/watch?v=7409Gq51RFE
Gotta check this out.It's alot cheaper than others.
Thanks
I got a Wizard 100 (Cingular Branded) shell. It looks brand new.......not one scratch on it. It didn't come with a battery cover though
Ordered it last night...Should be here middle of the week.I hope it's in good condition.
anyone knows where i can get some extra screws?
i was about to assemble the wizards guts in to the new shell, but the keypads dont line up, if i go along and assemble, i wont have use of the send call button and the end call button, and some other buttons as well
Good Deal
The one they sent me was in great shape!!!
I just ordered a shell for my T-Mobile branded Wizard 200....I hope it will be practically new like the Cingular Branded Wizard 100 shell I ordered earlier...
Does the innards from the T-Mobile version of the TD2 fit in the original Diamond2 housing.
Its something I'm thinking of doing...and would like to know if its been done or possible at all.
That would be an interesting project, hope you try it out. They only thing that I could think of not fitting is the speaker, which on the MDA is on the side of the device.
EDIT: Scratch that, the MDA also is on the side. It looks like it could work, but the only porblem looks to be the bottom of the phone, which is much curvier
You will need to purchase a touch screen digitizer if you try this. It is attached to the housing and impossible to remove without damage. Also, when removing the digitizer and other ribbon cables, remember to slide the little black peice slightly to remove it. Very tricky, but I have completely taken the topaz apart numerous times. P.M. me if you run into any snags..... although I don't recommend trying the switch unless you have experience in electronics. Good Luck!
tomtommy306 said:
You will need to purchase a touch screen digitizer if you try this. It is attached to the housing and impossible to remove without damage. Also, when removing the digitizer and other ribbon cables, remember to slide the little black peice slightly to remove it. Very tricky, but I have completely taken the topaz apart numerous times. P.M. me if you run into any snags..... although I don't recommend trying the switch unless you have experience in electronics. Good Luck!
Click to expand...
Click to collapse
I don't have experience! But its never held me back before. At the moment I'm having problems locating a full housing including the front and side buttons..the only housing I can find are without buttons....I was thinking of buying a dummy for the buttons...don't know if thats viable.
Be sure to tell us how it went, and any special steps/problems you encounter.
Although, it really does look more like a cheap LG phone than a Nokia, except for maybe the 5800.
pistonripper said:
I don't have experience! But its never held me back before. At the moment I'm having problems locating a full housing including the front and side buttons..the only housing I can find are without buttons....I was thinking of buying a dummy for the buttons...don't know if thats viable.
Click to expand...
Click to collapse
Ebay! Or try CNN.CN for a more expensive approach.
They even sell a full black housing with the matt black if you want to be different.
http://cnn.cn/shop/t5353-touch-diamond2-topaz-c-277_829.html
CNN.Cn doesn't have the buttons included either
i too want to try it, but encountered the problem of the buttons... No housing is sold with the buttons. For the rest i can't see any difficulties, the Inside of the Compact V and the Topaz should be the same, i mean, will HTC manifacture a complete new phone just for T-mobile? I think just the housing is different.
When i find a way, i'll contact you!
I found one supplier....they include the front buttons but do not include the volume or power buttons
http://www.truesupplier.com/original-full-housing-cover-for-htc-touch-diamond-2-pr-18539.html
EDIT: Sorry it does include all the buttons as well as the front keys.....so ordered everything ...just waiting now
Topaz Antenna
does anyone know where I can I get the topaz antenna from ?
Received my casing today....but need the antenna.....the Compact V antenna is integrated into lower back of the casing as one piece....so its of no use
Dang, that sucks, I have searched for the antenna before, but haven't found any. Maybe try a broken TD2 on ebay or something. Other than that I have no idea
cmstackar said:
Dang, that sucks, I have searched for the antenna before, but haven't found any. Maybe try a broken TD2 on ebay or something. Other than that I have no idea
Click to expand...
Click to collapse
Well thats the only missing piece in the jigsaw.....so if/when I get it I will update the thread....in the mean time, if anyone knows where I can get this or make one up....its looks all plastic with 2 connectors...the connectors I have.