I was tring to install the Mobile Office 2007.cab file from my mini sd card on my htc x7500 and i am getting an error message that states........
"Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"
Thanks for the help.
Try this link to install :
http://rapidshare.com/files/36100054/MS_Office_2007.rar
thanks for the link i found it late last night. Another question, is there a way to hand write notes in mobile onenote. thanks
irus said:
thanks for the link i found it late last night. Another question, is there a way to hand write notes in mobile onenote. thanks
Click to expand...
Click to collapse
Not realy, you can use transcriber, but it tries to convert everything to typed text.
Tadeusz said:
Not realy, you can use transcriber, but it tries to convert everything to typed text.
Click to expand...
Click to collapse
This really ticks me off; ONM should be perfect for this and let WM users utilize a WM device in conjunction with a non-Tablet device for handwriting notes.
A messy workaround is to write it on a paper and take a picture of it with ONM.
support said:
Try this link to install :
http://rapidshare.com/files/36100054/MS_Office_2007.rar
Click to expand...
Click to collapse
Hi, I installed the office 2007 cab and it was ok. I can open word, ppt and so on but when I'm trying to open an excel file I can't it opens excel soft but inmediately it closes. How can I solve this?
Thanks a lot in advance.
Mobile Office w/onenote
It installs fine, but when I try to open these programs I get these errors.
Excel: Can't find 'pxl' (or one of its components). Make sure the path and filename are correct and that all the required libraries are available.
Word: Can't find 'pword' (or one of its components). Make sure the path and filename are correct and that all the required libraries are available.
Powerpoint: Can't fine 'ppt' (or one of its components). Make sure the path and filename are correct and that all the required libraries are available.
Mirror Site
Anybody have a mirror site for this file?
pclosa said:
Hi, I installed the office 2007 cab and it was ok. I can open word, ppt and so on but when I'm trying to open an excel file I can't it opens excel soft but inmediately it closes. How can I solve this?
Thanks a lot in advance.
Click to expand...
Click to collapse
I tried opening the 'Vehicle Mileage log'and it shut down Excel. I the opened the Blannk 97 - 2003 Workbook and put a couple of figures in it then closed it and can now open the mileage log. I've yet to try it with any other s/s tho.
Related
New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
Been trying everything on the Internet and managed to make some headway with Monet (Virgin Lobster 700tv) unlock (this might work for Meteor/C700 as well).
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
[see attachment]
a. copy "SP_AllowCertificateInstall.cab" to the root of Monet memory or card
b. Use file explorer on monet to navigate to file. Click to run. Should run ok.
c. Unzip "SDA_ApplicationUnlock.zip" on PC and run "SDA_ApplicationUnlock.exe" whilst Monet is connected via activesync
2. Copy registry editor onto Monet. I used PHM, but others should work. Note install PHM loader on PC whilst monet is connected via activesync. It might install correctly on Monet, it might not. This does not matter. Just navigate on your PC to Program Files\phm and find the .exe file and copy to root of Monet memory or card.
Also nice free remote registry editor here (works from PC whilst phone is connected via activesync):
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Excellent 'free' combined file explorer and registry editor (perhaps for later - after app. unlock) SGS:
http://www.handango.com/PlatformPro...925777&Ntt=registry&productId=195244&R=195244
3. Using phm (or the registry app you like) change the four keys specified in this guide (you might find the above process has already reset 1001 and 101b:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
They are:
Under HKEY_LOCAL_MACHINE\Security\Policies\Policies:
a. Change the DWORD named "1001" to 1 (could originally be 2)
b. Change the DWORD named "1005" to 40 (could originally be 16)
c. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 or 16 (before) 144 (after)
d. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 101b = 1 (this key might not exist, if so, create it).
4. Restart
5. HOORAY. Now your phone is fully application unlocked.
-----the following procedure is to SIM Unlock, this currently does not work. Possibly spv-services will be updated at some time to work with the Monet---->
6. Now download spv_services:
http://www.spv-developers.com/forum/showthread.php?t=236
a. copy the cert.cab file to you Monet. Select and run using File explorer. it should run fine.
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
Will investigate. Anyone have any luck please say. At least we can now get the phone app.unlocked.
------------------------->
Note: I have read that the phone might again become app.locked if you do a hard reset. If this is the case, just follow the above again.
rgds
colonel said:
(...)
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
(...)
Click to expand...
Click to collapse
So this thread should not be named Full unlock for HTC Monet :>
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
bongmaster said:
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
Click to expand...
Click to collapse
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
colonel said:
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
Click to expand...
Click to collapse
1st thing i checked was the firewall..
i know wat a php is i run a phpbb forum and yea it is a Monet (lobster 700)..
shame ( i really need to unlock the networks on it ) i have an O2 sim and wen i put it in it askes for a network unlock code.. if only i had that code.. any idea how to obtain it?
the only way currently is to use virgin or a commercial service
If you put at least £30 of talk time on your virgin account, they will send you the unlock code for free.
Otherwise search google or this forum for a commercial unlocking service.
rgds
colonel said:
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
http://www.spv-developers.com/forum/showthread.php?t=425
Click to expand...
Click to collapse
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
burticek said:
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
Click to expand...
Click to collapse
Edit: Never mind. I have found it ;-)
Virgin Lobster
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
classicxda said:
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
Click to expand...
Click to collapse
simunlock is not working yet on the monet.
this procedure only app. unlocks
rgds
c.
Lobster unlock
What would it cost to do this?
Cheers
SteveW
just phone virgin if yu have a lobster. they require £30 of airtime to be purchased before they give you the code
Application Unlock for HTC Monet
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
leadweight said:
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
Click to expand...
Click to collapse
I also have been trying to unlock my Lobby to no avail.
Used a couple of reg editors but when u change the values the phone comes back "Unable to perform this operation".
I also used the HTC unlocker which came back with the same message.
Lobster headache
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
leadweight said:
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
Click to expand...
Click to collapse
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Find File
bocsta said:
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Click to expand...
Click to collapse
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
leadweight said:
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
Click to expand...
Click to collapse
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
bocsta said:
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
Click to expand...
Click to collapse
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
leadweight said:
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
Click to expand...
Click to collapse
Yes it dowmloads OK. I just cant unzip it. Can you try to unzip it please ?
If it fails and you still have the Zip file that you unzipped originally cann you please PM it to me ?
Thanks
Before I flashed the new Test-Rom (Aku3.3 - i had the original MDA-VarioII-Rom from TMOB Germany) I was able to log in to Planet3/3-Homezone with the trick, that I changed Registry-values to say the 3-server, that I´m with a NokiaN70-phone and not the HTC-Hermes.
With flashing the new rom the Registry-Changes take no effect...
Has anyone an Idea?
Changes to be made:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Internet Settings\5.0\User Agent]
@="NokiaN70"
Seite: http://mobile.drei.at/hb/NokN70/HutchKey
same roblem here.
The problem is: The User Agent of the Pocket Internet Explorer isn't sent with the URL-Request.
Is a bug of the PIE.
Has anybody a solution?
Sorry, which bit of Planet3 can't you access using the default settings? I'm able to do pretty much everything with the default settings, I'm currently running XDA Live 0.20.1 on 3 Australia in Melbourne.
KevinBaker said:
Sorry, which bit of Planet3 can't you access using the default settings? I'm able to do pretty much everything with the default settings, I'm currently running XDA Live 0.20.1 on 3 Australia in Melbourne.
Click to expand...
Click to collapse
But he´s not from AUSTRALIA, ---> AUSTRIA...
I have the same problem...
3 Hutchinson Austria doesn´t support WM5/6... cause they don´t have HTC-mobiles to sell... so you only can connect with this trick to let them believe you´re on an supported phone....
tosstasny said:
But he´s not from AUSTRALIA, ---> AUSTRIA...
I have the same problem...
3 Hutchinson Austria doesn´t support WM5/6... cause they don´t have HTC-mobiles to sell... so you only can connect with this trick to let them believe you´re on an supported phone....
Click to expand...
Click to collapse
Err.... well its late and I'm very tired . Sorry
Idea?
Has no one an idea, how to set up die PIE?
tosstasny said:
Has no one an idea, how to set up die PIE?
Click to expand...
Click to collapse
I have the same problem with 3 Hong Kong. I downloaded the technical preview of Netfront 3.4 and there U can set the user agent as :
Nokia6680/1.0 (Symbian OS/8.0 ;Nokia; Series60/2.06)/Netfront3.3
Everything works now except Streaming Media and video download. I tried using Dopod838pro/mozillia/4.01 before..but I have problem access text news. However, I could get the link of streaming video and copy the link to stream player myself to play the video. Since I don't watch video much, I just use the user agent that works with text news best. I am sure you can find a better user agent setting. I just use the first one that works for me.
Thänx alot...
Busstop said:
I have the same problem with 3 Hong Kong. I downloaded the technical preview of Netfront 3.4 and there U can set the user agent as :
Nokia6680/1.0 (Symbian OS/8.0 ;Nokia; Series60/2.06)/Netfront3.3
Everything works now except Streaming Media and video download. I tried using Dopod838pro/mozillia/4.01 before..but I have problem access text news. However, I could get the link of streaming video and copy the link to stream player myself to play the video. Since I don't watch video much, I just use the user agent that works with text news best. I am sure you can find a better user agent setting. I just use the first one that works for me.
Click to expand...
Click to collapse
Works perfect, but I can´t get the videos running....
Maybe somebody who uses the XDA Live ROM can zip the hidden system-files (4 files) which are starting with IE in Windows-directory. Then I can move them to my ROM with a proggy, and the Bug is away!
You will need the 3MobileTVonWM5Device.zip from Up/Download-Area after registering at http://www.umtslink.at/3g-forum
THE PROB WITH THE STREAMING PLAYER: SAME PROBLEM WITH 3 IN AUSTRIA, BUT I SOLVED THIS PROBLEM LONG AGO.
First you need to get the 3-Page running on your TyTN, then
(Who already has HTC Stream Media installed can start at Point 3)
1. copy the files from 3MobileTVonWM5Device.zip to /Windows on HTC TyTN
2. copy the StreamingVideo.lnk to /Windows/Start Menu/Programs
3. install 838Pro_Streaming_v210.cab to Device-Memory on HTC TyTN (XDA Trion,....)
4. Soft reset
5. open Streamingplayer in Programs and as Connection set the 3-Internetconnection
6. 3Planet MobileTV Link works.
PAPPL said:
Maybe somebody who uses the XDA Live ROM can zip the hidden system-files (4 files) which are starting with IE in Windows-directory. Then I can move them to my ROM with a proggy, and the Bug is away!
You will need the 3MobileTVonWM5Device.zip from Up/Download-Area after registering at http://www.umtslink.at/3g-forum
THE PROB WITH THE STREAMING PLAYER: SAME PROBLEM WITH 3 IN AUSTRIA, BUT I SOLVED THIS PROBLEM LONG AGO.
First you need to get the 3-Page running on your TyTN, then
(Who already has HTC Stream Media installed can start at Point 3)
1. copy the files from 3MobileTVonWM5Device.zip to /Windows on HTC TyTN
2. copy the StreamingVideo.lnk to /Windows/Start Menu/Programs
3. install 838Pro_Streaming_v210.cab to Device-Memory on HTC TyTN (XDA Trion,....)
4. Soft reset
5. open Streamingplayer in Programs and as Connection set the 3-Internetconnection
6. 3Planet MobileTV Link works.
Click to expand...
Click to collapse
The only thing is, that the 838Pro_Streaming.cab won´t install.
Did you try the cab from the zip file?
On my XDA Trion it installs normally and then it works
.CAB install
PAPPL said:
Did you try the cab from the zip file?
On my XDA Trion it installs normally and then it works
Click to expand...
Click to collapse
On my VarioII I get an error when installing (permission...), I´m on XDA-Live 0.20... before (Aku 2, Aku 3.3) the installation worked....
EDIT: VERSION4 of UA Pocket Internet Explorer
Now the User Agent change works again with WM5 AKU3.3+ and WM6.
More details see: http://forum.xda-developers.com/showthread.php?p=1198850#post1198850
PAPPL said:
Now the User Agent change works again with WM5 AKU3.3+ and WM6.
Unzip the Package and copy the files to your Windows-Directory on Hermes.
On Overwrite-promt tap yes.
Then change for 3-Austria the User Agent in Registry to:
[HKLM\Software\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
(Default)= SonyEricssonW850i/R1EL Browser/Netfront/3.3 Profile/MIDP-2.0
The old User Agent String doesn't work for some reason. (?)
Planet3-AT-URL:
http://mobile.drei.at/hb/homebase/HutchKey
MMS still working.
Tested on english ROM, german ROM should be sopported too.
Click to expand...
Click to collapse
Works great, thänx a lot. Great work. While posting in 2 diffrent forums *gg* such a perfect solution.
Look: I edited post #13
hello my friend
I had the same probleme like you!!!!!
But now, not anymore, hehehe. I red with great interests your posts in the other forum and than here.
You help me a lot, thank you very much. I think [/B]you and a lot of these guys here, are very professional.
Without your help, I am sure, I sit with my hermes and I will not be lucky - because a lot of my problems does not be solved.
once more, thank you, morf
sorry, for my bad english
Does it also work on the trinity ?
When i copy the files in the windows-directory on my htc the internet-explorer doesn't start any more and the htc hangs.
Only a reset helps.
See posting #13: Flexible User Agent PIE V2 released
If you installed the first Release, simply select the overwritten files in Windows-directory and delete them, the original ones from static ROM will be replaced automaticly. Then install the two files from new zip, and smile.
For more info see post #13
I unzip the file and copy the resulting files to storage card in phone and then inside the phone through "File Explorer" copy that two files to folder under Windows, I got the following error message.
Pls advise if the method to copy file is incorrect or is there any method to solve this problem. Thanks.
Cannot copy "browser" : Access is denied.
Hi,
I can browse all the contents & see all streaming after changing the registry and overwriting both the browser dll and webview dll files under phone windows directory( from the zip file)
But it created another problem.... I cannot open any sms message or write any sms after the change .
I used the spb backup (ghost) and I have no problem at sms again, then I only overwritten the browser dll only to the phone windows directory ( did not overwrite the webview dll) , it now works for both sms and IE browsing !!!b
Hello all,
I have found WORKING little app to save CABs from MarketPlace. You can download the app here:
http://blog.idlezone.org/post/2010/01/11/Windows-Mobile-MarketPlace-:-choose-where-to-install
(use fixed version posted in the comments of the article: http://blog.idlezone.org/public/DarkApps/DarkCABCatcherInstaller_quickfix.CAB)
Awsome, thanks for posting ! =d
Thank you So So So Much
Will
Works it also for paid apps?
doesnt work for me.
Awsome, How do you work this thing.
When I run DarkCABCatcher, I have set fom folder to \.\Application Data\Volatile to \.\My Documents.
The DarkCABCatcher application shows the following:
MKP5C5036.cab OK!
MKP5C5036.cab installed.
MKP5C5036.cab started.
MKP5C5036.cab copy Ok.
When I look in my \.\My Documents folder there is no .cab file collected.
Any ideas?
Thanks
Richard
Thanks !
I never used MarketPlace yet, but just in case, I'll keep that trick handy and try it.
I don't understand their position on "piracy", since I generally only use free software...
When it's not free, I buy the licenses, but since I'm flashing a lot these months, I really doubt MarketPlace would recognize my device next time I log on, so this trick may be unvaluable... Just to keep access to what I had legally bought.
Thanks for this, but unfortunately on cooked WM6.5 portuguese ROM it doesn't work. I confirmed that I have NetFW3.5 installed so I don't know what's wrong:
What a pity - don´t work at all on T-Mobile Vario V (HTC TouchPro2) with Windows Mobile 6.5.
Sometimes it write the cab is copied - but can´t find it in the destination folder.
Sometimes it just don´t show anything.
Yours
WeT-Klb
Cool app, didn't work
The critical thing this app shows is where the temporary CAB files are downloaded when installing from the Marketplace app.
Just open this folder in Windows Explorer while the phone is connected to your device. You have to turn on "view hidden and system folders" to see the folder on your phone.
Wait and watch the folder during the install. It will create a CAB file, which will get an icon as soon as the file is finished writing to the device. Quickly copy the file off the phone onto your computer.
(I have installed z-zip and associated CAB files with the program, which is why I get a nice icon as soon as the download has finished.)
http://forum.xda-developers.com/showthread.php?p=24513246#post24513246
I check and i still havent found a solution to get 7-zip http://www.7-zip.org/download.html to work on our HD2? Has anyone had a solution yet on how to make this program work? Every time i extract a file it gives me an "ERROR not enough memory"?
thebest1 said:
I check and i still havent found a solution to get 7-zip http://www.7-zip.org/download.html to work on our HD2? Has anyone had a solution yet on how to make this program work? Every time i extract a file it gives me an "ERROR not enough memory"?
Click to expand...
Click to collapse
As far I know, Zip7 isn't support on a windows mobile device.
I can be wrong with tis statement, but I never saw it on a mobile device.
kurt-willems said:
As far I know, Zip7 isn't support on a windows mobile device.
I can be wrong with tis statement, but I never saw it on a mobile device.
Click to expand...
Click to collapse
Agreed ..
7z-zip isn't for Windows Mobile, It's for Windows PC
Edit ::
It's Available for WinMo, And its working ( I gotta do intensive reading next time )
kawazaki said:
Agreed ..
7z-zip isn't for Windows Mobile, It's for Windows PC
Click to expand...
Click to collapse
but on the 7zip download site, there is definitely an item labelled "7-Zip for Windows Mobile / Windows CE (ARM)" and it seems to work - not perfectly, but still - on my HD2
Still no solution. WOW! i guess i just have to extract the files via a PC. Meanwhile I will try find a solution to make our HD2 extract 7zip files.
I found that it was easier to just use it on the pc than piss about with it on the phone, not a particularly useful app I must say.....
I use the attached version as stated earlier it is by no means perfect but does work.
thank you lantern 20 i will give this cab. provided a try.
I've found it does work but is dependant on file size and what size of data you're trying to extract, eg, extracting kernels for android is no problem, whereas trying to extract a full android build is a no go, maybe due to the program needing full extracted data size to work with as a temp folder during extraction???