i'll shut up if you'll just answer my question!!! - iPAQ rw6828, XDA Atom Software Upgrading

Is there any sim unlocking solution on my xda atom pure? i been asking everyone but, i think everybody likes to IGNORE a "NEWBIE" in this forum. or atleast can somebody tell me that someone is working on a unlocking tool... i dont tend to be mean of something its just that im so pissed that everyone is ignoring me!

Because you're asking for a sim unlocking solution. You must be from Turkey, but I'm afraid it isn't allowed here...
Also, bear in mind that most of us got our Atoms unadulterated. Even me. BE PATIENT. NOBODY HERE IS GOD, INCLUDING YOU.

why cant you just reflash the firmware?

how sir?! whatdo you mean by reflashing the frimware? i installed the custom firmware that is available in this forum but still no luck. my phone is still not unlocked.

Check whether below link helps.
http://www.mobilefun.co.uk/o2-xdaatom-unlock.htm?referer=default

It says "this model can't be unlocked" on the very first line. <_<
In any case, if they give you access to the bootloader, flashing your unit just MIGHT work. However, I have no garuntees. I've seen far too many people here with junked Atoms, and before Jiggs's ROM I lived with an unstable hacked Atom Exec ROM.
If you still want to try, tho, I heartily recommend Jigg's ROM. If it works, good for you. I don't like flashing locked devices because god knows what else is locked...

Ultimate Chicken said:
It says "this model can't be unlocked" on the very first line. <_<
In any case, if they give you access to the bootloader, flashing your unit just MIGHT work. However, I have no garuntees. I've seen far too many people here with junked Atoms, and before Jiggs's ROM I lived with an unstable hacked Atom Exec ROM.
If you still want to try, tho, I heartily recommend Jigg's ROM. If it works, good for you. I don't like flashing locked devices because god knows what else is locked...
Click to expand...
Click to collapse
Hi guy
I don't thing this forum would like to ignore the question from newbie . For your problem I don't thing ATOM got any sim lock , the reason is your network provider they maybe lock your sim to prevent anybody who haven't buy the mobile from their supplier to protect the profit . It seems my friends who come from Egypt he brought a phone from HK (use the HK local sim is OK)however he can't be use after back to his country (due to use the eygpt locate sim ) .
Finally I think you better contact some local mobile company they may help you to solve.

ericj said:
Hi guy
I don't thing this forum would like to ignore the question from newbie . For your problem I don't thing ATOM got any sim lock , the reason is your network provider they maybe lock your sim to prevent anybody who haven't buy the mobile from their supplier to protect the profit . It seems my friends who come from Egypt he brought a phone from HK (use the HK local sim is OK)however he can't be use after back to his country (due to use the eygpt locate sim ) .
Finally I think you better contact some local mobile company they may help you to solve.
Click to expand...
Click to collapse
Agreed with ericj
For my case in singapore you just hav to call the mobile company you are using and they will give u the code to unlock. More or less confirm its not an issue with your atom
Cheer!!
kaidi

Forum Untold Rule
I think it is normal for an unknown question to be ignored in any forum. It is not because you're newbie... it is simply because no one knows, or it has been answered before. When this happens, googling, and googling, and googling is all you can do.
I have been asking, and asking, and asking on different threads, too, and I also experience being ignored as well. BUT after thorough searching, you'll get to somewhere...
Besides, this section of the forum doesn't have a moderator; so, you should expect not to be answered immediately. I believe, most people who are present are here for one reason alone - ATOM UPGRADING.
Then you should realize that you can not expect someone else to do the searching for you because the members/viewers present are here for different reason.

so... in the bottom line there's no way that my cellphone will be unlocked?

so anyone working on a unlcoking solution? Iphone now a days can be unlcoked, and Atom has been in the market for 2 years now... and still no one has done a unlocking solution? GOD please help me!

one good question is, although we know that if the phone can be use with other sim is unlocked, we can just do this even if it's not with wm os, but, is there a software we can use to find out if our phone is unlocked or locked? don't mean to be stupid though, just wanted to make sure if there is one.......
meanwhile, i will try to search an answer to my question, but i will wait for your answers guys....

Related

Ameo sim unlock

Do you think we can unlock a t-mobile ameo with this tread? http://forum.xda-developers.com/showthread.php?t=240784
If it doesn't work can you explain me why. And do you think we can modified this method to unlock the Ameo? If yes how? Thanks
Well, it looks like nobody has tried it on Ameo yet....
I have TMob anyway, so I certainly will not be the first to test it
Hello, do you think I can brick my Ameo if I try this method? Thanks
I am not aware of Brickage from this, but a few people reported odd radio problems or strange sim problems when it didnt work.
The biggest problem would be locking the phone completely from all sims!
I guess its a gamble somebody will have to take, but I dont expect it to work.
HTC have done some major work since the older handsets this was written for.
So do you think I can try this or not? thanks
denver212121 said:
So do you think I can try this or not? thanks
Click to expand...
Click to collapse
Are you looking for someone to blame if it breaks your Athena?
If you can afford to buy another unit if you brick yours, then the answer is yes, go ahead and try it.
As Pantaloonie says, Its up to you.
I can say this, I will NOT try it on my Ameo.
Many HTC phones have been bricked during the development of roms and tools on this site, a lot of them have then been recovered by later tools developed to save the early testers from bricked devices while others stayed as hardware donors.
We all owe these pioneers a lot, without people willing to take the jump/plunge/leap whatever we wouldnt have half this stuff.
That doesnt mean you have to be one of them though.

HardSPL first or SIM unlock first

Hi Gurus
Is it safer to apply HardSPL first then SIM unlock or the other way round.
Maybe it doesnt matter.
Whats your view ?
Asif
I did sim unlock first. then I apply hardspl. now flashing different roms. don't know exactly how the process suppose to be but that's what I did and my phone is working like a champ
I did hard spl, then Sim unlocked, not sure if it matters. I had the same query when I unlocked, but wondered if I missed something in the WIKI, so didn't ask due to a good flaming (if you aint done your research you can get crusified in here). Your braver than me lol
@AsifM3100: U need to do the CID/SIM update first; it will load it's own spl and radio. When U have completed the process, then U should install the hardspl before flashing your own radio and or rom.
Sotian
You post made me laugh. However I have made the same observation but couldnt find the answer in the wiki or other posts. Its one of the reasons why I have put off unlocking and flashing for such a long time. So many people who you feel sorry for, cos they have bricked their phones and who are panicking, just get told to do the research. When you are in that state the last thing you need is research. Its such a contrast to the SAP developer network site that I use regularly where evryone is so keen to help (me included).
Having said that its still the best site for us Hermese peeps. I would be in no state to unlock if it wasnt for this site. I just hope nothing goes wrong.
Regards
Asif
AsifM3100 said:
Sotian
Its such a contrast to the SAP developer network site that I use regularly where evryone is so keen to help (me included).
Click to expand...
Click to collapse
3 thoughts on this:
1. It is scary when the Germans are nicer than us
2. You gotta feel sorry for anyone hanging around in an SAP developer network
3. We aren't so bad when people have done research. It is the "HELP PLZ!!!!! - JUST GOT MY HERMES THIS MORNING AND BRICKED IT!!!!" posts that get people upset. Or the "CAN SOMEONE TELL ME IF THERE IS A WM6 ROM AVAILABLE FOR THE 8525 BY CINGULAR????" People who do their research and ask don't get crucified too badly - usually.
Oh, and regarding the question - doesn't really matter, since (as galaxys noted) the unlocker uses it's own SPL called SSPL and overrides whatever SPL you have loaded. However, it is good practice to throw HardSPL on their as the first step, since it protects the Hermes from having it's bootloader borked - and that is a good thing!
Hi todd_gj
There are not that many Germans on the SAP dewv Networks. Its mainly asian probably in Southern India. Most of the software is now developed out there, especially sisnce it costs $10 an hour. I bet most WM5/6 is churned out over there.
But I do take your point. You need to do your reading, but i have found a little extra help goes a long way to making sense of it all.
Regards
Asif

Another dead wizard

Hi there. I have/had wizard g4, but after upgradin' rom by ruu my phone is bricked. he doesn't even respone to charger.
Now technical details: upgrade was done on i/spl 2.21.001/olip, so after hardspl'ing him. Everythin' went just fine, but in 73% i've realised that i'm uploadin' g3 rom... So i let ruu finish his job and now my pda is completly dead.
I won't be askin' for HELP, i will ask for info. Will anyone can tell me: if i take out 'disk on chip' (cause i think that's the flashrom chip), how i can reflash it? I mean: should i just put nk.nbf from 0x0000 or split rom image onto bootloader, radio and os and put it partially? what are adressess of those thinx and lenght of code? and how can i split nk.nbf?
Congrats !
What your are asking is not easy to do,it requires special flashing tools and connectors,which only the manufacturers and vendors have,It needs new bootloaders,you cannot do it yourself.DOC chip might have to be replaced,it means an almost new phone
Btw,have you tried to force it into bootloaders ? might be lucky,if it gets into bootloaders.well there's no harm in trying,if it does,then you might in luck and safe.
whatdy'a mean sayin' 'force it into bootloader'? if you mean pressing cam button while poweing it on- yes i've tried. i even tried to boot linux on desktop computer, connectin' wizard and typin' 'lsusb' in console, hoping that something like 'xxxx:xxxx unkown vendor' occurs. But, still no luck. even linux thoughts that usb port with connected wiz is free.
I know that only vendors and sevice-guyz know 'tricks' about connecting directly to DOC chip... but i'm still hopeing, cause i've found two unused connector places on mainboard(after disassemblin' of corse)- one in the middle, second next to sim card connector and i'm wondering if there's any chance to ommit BGA-welding(sorry 4 my english).
Have you heard about conspiracy theory ? i begun to belive in it... I think that many people know what 2 do, but noone want to help me from one particular reason: if someone helps me, i wouldn't need to pay in service, so someone will not earn money...
anyway, what do you mean about 'force in2 bl'?
lis6502 said:
whatdy'a mean sayin' 'force it into bootloader'? if you mean pressing cam button while poweing it on- yes i've tried. i even tried to boot linux on desktop computer, connectin' wizard and typin' 'lsusb' in console, hoping that something like 'xxxx:xxxx unkown vendor' occurs. But, still no luck. even linux thoughts that usb port with connected wiz is free.
I know that only vendors and sevice-guyz know 'tricks' about connecting directly to DOC chip... but i'm still hopeing, cause i've found two unused connector places on mainboard(after disassemblin' of corse)- one in the middle, second next to sim card connector and i'm wondering if there's any chance to ommit BGA-welding(sorry 4 my english).
Have you heard about conspiracy theory ? i begun to belive in it... I think that many people know what 2 do, but noone want to help me from one particular reason: if someone helps me, i wouldn't need to pay in service, so someone will not earn money...
anyway, what do you mean about 'force in2 bl'?
Click to expand...
Click to collapse
First,let me clear you here, There's no such "Conspiracy theory" being practiced here in this Forum.It's a development Forum and not a Technical Advisory Service of some sort,where experts give advise and earn money.Its a free forum to help the newbies about the problem regarding their phones,We here believe in "Help & Support".The guys and gurus are not trained technical experts,its a voluntary website,where guys help and advise what they have learned and gained to the new guys joining and asking for help and they do it with honesty and to the best of their knowledge without any monetary benefits.
Secondly,Yes ! thats exactly what I meant for 'Force into booltloaders',cuz,may be if it does boot in the bootloaders,then it might be recovered,just a haunch,but if it doesn't,then its another dead paper weight on the desk.
Cheers!
I think it's a misunderstood there. I mean that maybe someone know what to do, but if it would leak to internet then services can lost money, cause what to pay 50$ i.e. if you can repair PDA by yourself?. I mean also that i've searched whole wide web... My polish sites of electronics, pda forums, even those forums where volunteers helps guys who crashed their bioses on PC's. And nothin', no one replies to mails, and if i ask someone directly they say thats no hope for me and my PDA.
I just cannot believe it... Even old PC had protection, if you uploaded wrong code into BIOS and PC cannot boot you always could ISA graphic card and boot from floppy.
lis6502 said:
I think it's a misunderstood there. I mean that maybe someone know what to do, but if it would leak to internet then services can lost money, cause what to pay 50$ i.e. if you can repair PDA by yourself?. I mean also that i've searched whole wide web... My polish sites of electronics, pda forums, even those forums where volunteers helps guys who crashed their bioses on PC's. And nothin', no one replies to mails, and if i ask someone directly they say thats no hope for me and my PDA.
I just cannot believe it... Even old PC had protection, if you uploaded wrong code into BIOS and PC cannot boot you always could ISA graphic card and boot from floppy.
Click to expand...
Click to collapse
focus on the problem:
tell me if u can at least see the bootloader ? If yes then u can have a fair chance of bringing urs back to life
It is because you are not supposed to flash a ROM that is not for your device!
For example, what will happen if you flash a AMIBIOS to a motherboard that uses AWARDBIOS (By your own way for sure)? Flashing G3-only ROMs to G4 device is just like that.
The protection for htc device is not letting you to flash a G3 only RUU in the usual way, you cracked to let it allow any ROM is your own problem, not problem of htc, and htc doesn't have to take care of it.
alber786 said:
focus on the problem:
tell me if u can at least see the bootloader ?
Click to expand...
Click to collapse
few posts ago i've wrote, that i cannot even see red led when pluggin' onto charger. BL mode doesn't work either (cam+ sr or cam+pwr).
i've found another way to resurrect my wiza200. JTAG.
But ofcoz noone knows where are testpoints located. But i'll find it. BTW someone can e-mail me fubu of working g4 wizard? lis6502 (at) gmail (dot) com
starkwong said:
For example, what will happen if you flash a AMIBIOS to a motherboard that uses AWARDBIOS (By your own way for sure)? Flashing G3-only ROMs to G4 device is just like that.
Click to expand...
Click to collapse
yeah, i know what i did. i understand example of bioses misupload. i've explained in that way to some guys who doesn't understand what i did
starkwong said:
The protection for htc device is not letting you to flash a G3 only RUU in the usual way, you cracked to let it allow any ROM is your own problem, not problem of htc, and htc doesn't have to take care of it.
Click to expand...
Click to collapse
Do i cracked it? i just found ONE working ruu which allowed me to upload any rom to my device. i've switched nk.nbf files in folder wich ruu was in.
I know also that HTC wouldn't help mi, i'm not counting on warranty or manufacturer help.
No No...
You installed HardSPL to your device, so your device is already cracked (say patched may be better) by you.
starkwong said:
No No...
You installed HardSPL to your device, so your device is already cracked (say patched may be better) by you.
Click to expand...
Click to collapse
uhm, it may be infatile question, but is it illegal? i know thah chaging IMEI is illegal, but is hardspl'ing too?
Cracking SPL is not an offense in law, just violate the warranty terms only.
2 starwonk: man, i'm from poland. i've bought my spv on polish eqiuvalent of e-bay. It's o2 xda mini s, so warranty is only valid in UK. i've told that i'm not counting on warranty. i need and must do it all by myself. and i will do it. Wish me luck

[Q] Queries by a First timer with HTC (HD2)

Hey Guys,
I recently got a HTC HD2 as a gift from a friend. I am loving this phone - such a huge screen (I used iPhone 4 recently and it seemed so small then), amazing touch sense and overall experience.
I have been browsing the XDA forums for quite some time. I have few issues/queries that I want to get cleared up:
1. My HTC is locked to T-mobile, USA and I am in Canada. I have been unsuccessful in getting it unlocked. I contacted couple of shops who claimed to unlock it through the code but cudn't get the code. Anybody has any idea why is it hard to get HTC HD2 unlock code? I read somewhere that my IMEI number belongs to the new T-mobile series. Cud that be a problem? What do you guys suggest on getting my phone unlocked? One of the shops told me that they might have to flash the ROM but I don't know what that means....which brings to us to my next question...
2. What does "Flashing the ROM" means? It is about rewiring the ROM? I heard there are custom ROMs. What are custom ROMs? I need to figure out this ROM stuff. I know what is a ROM....I just want to know how this thing and different jargons work wrt Mobile phones.
3. Is there is any benefit of running Andriod (Froyo) on my mobile? I would love to have Andriod since WinMo has forced me to reset the phone more than I have resetted my previous smartphones per year. But, I think Andriod is still in development mode. What are your views on this issue?
I am going to browse the forums more and try to be active here. I hope these queries are a good point to start here.
Thanks in advance.
leon_nerd said:
Hey Guys,
1. My HTC is locked to T-mobile, USA and I am in Canada. I have been unsuccessful in getting it unlocked. I contacted couple of shops who claimed to unlock it through the code but cudn't get the code. Anybody has any idea why is it hard to get HTC HD2 unlock code? I read somewhere that my IMEI number belongs to the new T-mobile series. Cud that be a problem?
Click to expand...
Click to collapse
Yes, but keep trying different sites, , some are charging more for phones on the newer list,
What do you guys suggest on getting my phone unlocked? One of the shops told me that they might have to flash the ROM
Click to expand...
Click to collapse
LMAO! commical how uninformed supposed phone technicians are, , ,no, flashing will have no effect at all on sim lock.
but I don't know what that means....which brings to us to my next question...
2. What does "Flashing the ROM" means? It is about rewiring the ROM? I heard there are custom ROMs. What are custom ROMs? I need to figure out this ROM stuff. I know what is a ROM....I just want to know how this thing and different jargons work wrt Mobile phones.
Click to expand...
Click to collapse
think of the windows cd rom, , you put it into a blank computer, and it installs itself, , well a rom is kinda like that. A big file that, when you hard reset (or immediately after a flash) installs itself, complete with all included software, onto your phone. If you flash a new rom, its like using a different windows cd. 'chefs' can 'cook' roms, , get rid of operator added rubbish, add tweaks and programs, etc etc.
I am going to browse the forums more and try to be active here. I hope these queries are a good point to start here.
Thanks in advance.
Click to expand...
Click to collapse
read, then read more, then read again. Read the stuff youdont understand too, be a knowledge sponge, soak it alllll up. Everything (and i do mean everything) that you want to ask has alerady been asked, and usually answered, if you trawl through enough threads.

[Q] Just bought a Motorola Atrix 4G, however...

Hi guys,
I just bought a Motorola Atrix 4G from Ebay. However I was wondering, what ROM should I use, since I live in the Netherlands?
I already noticed a few roms here, however, since I live in the Netherlands, I want to know which one I should use for the best performance within my country.
Can someone please advice me?
Thank you very much.
//update
Sorry I forgot to mention it's the cell phone from AT&T carrier. I already know where to unluck it, thanks to this forum!
I am really sorry if this is a dumb question, but I couldn't find anything on it on the forums for Dutch people. :S
You're welcome.
Shaydar said:
Any ROM made for AT&T Devices:
Greyblur
Gingerblur
gladiAtrix
http://forum.xda-developers.com/showthread.php?t=972423
Quite a dumb question indeed.
Click to expand...
Click to collapse
I apologize for Shaydar. That is an incredibly rude comment to make for absolutely no reason.
Make sure the ROMs are compatible with your network. I know that Canadian users were warned to avoid using certain ROMs at first.
However, I no longer own an Atrix, so you might need to some more research on the subject.
joelszs said:
I apologize for Shaydar. That is an incredibly rude comment to make for absolutely no reason.
Make sure the ROMs are compatible with your network. I know that Canadian users were warned to avoid using certain ROMs at first.
However, I no longer own an Atrix, so you might need to some more research on the subject.
Click to expand...
Click to collapse
No problem, luckily there are some more decent folk around here. Oh well, I guess on every forum their are a few a..........
I never heard of a provider blocking a ROMs overhere in the Netherlands. But then again we are allowed a lot of stuff overhere, legalised soft drugs, red light district and so on. So I doubt it will going to block a custom ROM, but of course you never know.
So the ROMs, depending they aren't blocked, do work without problems with other countries, right? As a matter of fact, it doesn't matter what or who's ROM it is, the ROM itself doesn't provide the connection (phone/data/gps). Right?
Sorry if I misunderstood. Oh well; even if someone said it wouldn't work, it doesn't matter that much anymore, since the phone will arrive here within 2 days.
By the way, you returned the Atrix 4G? Didn't you like the phone or was there another reason?
I believe Canadian Atrix users have to use certain ROMs due to hardware compatibility. I'm no expert in Canadian Atrii but they've been waiting until very recently for an SPL that's compatible with their phones so I assume it's either compatibility between the ROM and the phone hardware (bootloader maybe?) or between the ROM and the network.
Sorry if I sounded rude.
All roms are just original firmware with skin and some mods.
Guess the guy sold his cell cause the bootloader was locked and some things like the real 4G, 1080p recording, and gingerbread are not yet available for the phone.
I am from france and all the roms avaible on this forum worked fine.
Got a preference for GreyBlur.
Enjoy your Atrix when you got it.
Mine cost me 425€ all costs in.
HHawk said:
Wow thanks for the welcome. Highly appreciated. Sheesh.
Click to expand...
Click to collapse
He's from Fracne. Dont worry. Everyone else around here is generally nice
Btw; welcome
HHawk said:
Hi guys,
I just bought a Motorola Atrix 4G from Ebay. However I was wondering, what ROM should I use, since I live in the Netherlands?
I already noticed a few roms here, however, since I live in the Netherlands, I want to know which one I should use for the best performance within my country.
Can someone please advice me?
Thank you very much.
//update
Sorry I forgot to mention it's the cell phone from AT&T carrier. I already know where to unluck it, thanks to this forum!
I am really sorry if this is a dumb question, but I couldn't find anything on it on the forums for Dutch people. :S
Click to expand...
Click to collapse
You purchased an AT&T phone so ant of the ROMs (greyblur, gingerblur, Gladiatrix) will work for you.
Just my 2 cents
sent from my better than yours Atrix ;-)
Shaydar said:
You sure haven't read what was written above...
Click to expand...
Click to collapse
Read it just fine buddy, just stating a clear fact.
Just my 2 cents
sent from my better than yours Atrix ;-)
Okay thanks. After doing some researching I will be going to use the GladiAtrix2v4.2.3 (not themed) version.
Let's hope I manage to get it working properly.
On a sidenote; my phone didn't arrive yet.
One thing: don't be surprised when you don't see the earphones in the package.
At&T just don't provide them.... But there's a HDMI wire.... Weird choice...
And plug your phone to the wall-charger if it doesen't seem to boot.
Shaydar said:
One thing: don't be surprised when you don't see the earphones in the package.
At&T just don't provide them.... But there's a HDMI wire.... Weird choice...
And plug your phone to the wall-charger if it doesen't seem to boot.
Click to expand...
Click to collapse
Ah okay... I don't care much about earphones, though other people might. But thanks for the information.
Also thanks for the extra pointer regarding the wall-charger.
Darn... I also wanted to order the Motorola vehicle dock including rapid charger, but it seems they don't have that overhere yet or in my neighbouring countries. :S
Cleaned the thread, back on topic.
Simple question; is there a way to disable those annoying messages about updates?
I rooted and installed gladiatrix and it has been working perfectly since then. However I am not getting messages about installing an update (4.1.83.en.US).
I select "Install later" every time, however after 3 hours it's back and it's getting annoying. Or is the update safe to use on a rooted gladiatrix phone? If not, how can I disable these messages completely?

Categories

Resources