Hi there,
I was looking around for an app to let you choose different ringtones for contacts on a priority basis.
I found something similar by v3patel, but it didn't allow me to prioritise, e.g. a 'personal' ringtone to take precedence over a 'business' ringrone when a contact is in both categories.
....so I made this app. I hope that it might be useful for others too, do as ever let me know of any bug reports or feature requests.
EDIT: If you were testing v0.1, please upgrade to v0.2 for an important bugfix!
Download Link Here - v0.2
This app requires the .net compact framework on your device. For WM6 this comes pre-installed in ROM, others need to download here
Carlos
=====
Instructions
============
1. Choose a category and a ringtone.
2. Click 'Add to list' to add it to the priority list.
3. Repeat steps 1 and 2 until you've chosen all your desired categories and ringtones.
4. Use the Up and Down arrow buttons to order your list into priority; categories at the top take precedence over categories below them.
5. Click 'Set Now' to make the changes.
Troubleshooting
===============
The app assumes that the ringtones are stored in \Windows\Rings. If this is NOT the case, go to the menu and choose 'Set Folder' to point it to a different location. This setting is currently NOT stored (sorry!) but will be in a future release if I get time!
Further help / support
======================
Please go to www.fatattitude.com/software or post in this thread
cool, will try
Good work....
Hey, great work and a good idea...
will try it also (it's too late to tell someone to call me )
Maybe it could be possible to listen to the ringtones before adding in a future release ? Just as input for you....
what does it mean "choice currently not stored" ? Will the changes be made to the categories, but when you restart your app, you can't see it anymore ? I think it is this way, but i'm not really sure....
Anyway, i like it !
Cheers, Peter
petervbeck said:
what does it mean "choice currently not stored" ?
Click to expand...
Click to collapse
No, it just means that your preferences aren't stored, including where you tell the app to look for the ringtones. Your contacts will be set to the new ringtones you ask for and will stay this way, even after a reset.
nice work. will try today. thx
i am using trinity wm6 bape rom. and got a platformnotsupport exception.
h0228631 said:
i am using trinity wm6 bape rom. and got a platformnotsupport exception.
Click to expand...
Click to collapse
Sorry, I forget to mention that the app requires the .net compact framework 2.0 to be installed, perhaps this is giving you the error. Download link added to first post.
C
Hi, for anyone experiencing problems with ringtones not playing in v0.1, please upgrade to v0.2 for an important bugfix... ...first post updated!
Do please keep feedback & suggestions coming - nearly 200 downloads and no comments on the program!
C
carlosp_uk said:
Sorry, I forget to mention that the app requires the .net compact framework 2.0 to be installed, perhaps this is giving you the error. Download link added to first post.
C
Click to expand...
Click to collapse
wm6 should have 2.0 by default. at least on official rom. I believe the bape rom should also have it. Anyway, I will try 2.0 out tonite and report later.
has anyone tried this on a WM Treo?
bnycastro said:
has anyone tried this on a WM Treo?
Click to expand...
Click to collapse
No, please try it out and let us know if possible!
If you just want to test the app, you could always add a contact to a new category, for example, "Test". Then just run the app and assign all contacts in category "Test" to a ringtone. If the contact you changed is successfully updated then the program works for you! If not, no harm done.
Do let us know if you have success.
h0228631 said:
wm6 should have 2.0 by default. at least on official rom. I believe the bape rom should also have it. Anyway, I will try 2.0 out tonite and report later.
Click to expand...
Click to collapse
still not work on my wm6 trinity.
h0228631 said:
still not work on my wm6 trinity.
Click to expand...
Click to collapse
It is perhaps to do with the recorded version number of your ROM and the settings for my CAB file.
Can you post the exact error message that you are receiving, along with when you are receiving it? Then I can try and help you.
C
It didn't work on my Prophet running WM6.
The program itself works, and assigns the correct ringtone to each category, but when a person calls, the default ringtone that is set in sounds & notification is played instead of the category ringtone assigned.
In each contact's information, the correct ringtone for that category is assigned. But it doesn't play that tone when that person calls.
When I open someone's contact detail and tap the ringtone, the left softkey changes to "play". When I tap that, there's no sound.
However, if I assign that same ringtone manually in the contact details, it plays when I tap "Play"
Hope you understand what I mean...
Putra said:
The program itself works, and assigns the correct ringtone to each category, but when a person calls, the default ringtone that is set in sounds & notification is played instead of the category ringtone assigned.
Click to expand...
Click to collapse
Thank you - if only all bug reports were that detailed!
Can you confirm that you're running v0.2 of the program? There was a bug in v0.1 that caused this behaviour. (see first post for download link)
C
Hi carlosp,
Yes, v0.2 works perfectly. Thanx for this app! It really saves us the chore of having to assign a ringtone for each contact individually.
Now, I'm trying to decide if I still need innesoft address book...
Putra said:
Yes, v0.2 works perfectly. Thanx for this app! It really saves us the chore of having to assign a ringtone for each contact individually.
Click to expand...
Click to collapse
No problem - let me know if you have any bug reports or more feature requests. I was thinking perhaps add an 'Any Category' option in the drop down, so that it's possible to unassign ringtones from all contacts in order to clear everything off and start again.
Hi,
something strange happened: I flashed my prophet to Prophet Touch VII ROM (I was on v6 before), and the Tone Manager didn't work.
Ran the program as usual, but after that I got the same problem as described in my post above. The ringtones are assigned to each contact but doesn't play during the incoming call. Exactly the same prob as in v01.
Strange....??? it was working before on my previous ROM....
A request: the folder is not saved but always reverts back to \windows\rings at each opening of the program. I have mine in the SD card... can you make the prog save the SET FOLDER?
Thanx...
EDIT: I re-downloaded the program from your website and re-installed it, and it works! Very strange, maybe the file in my PC got corrupted or something...
Tone Manager not working on Cingular 3125 (WM 5)
Hi Carlos,
I have installed .net framework v2.0 on my Cingular 3125 and after I start Tone Manager, I get the following error:
Error
An unexpected error has occurred in Tone Manager.exe. Select Quit then restart this program, or select Details for more information.
After clicking on details, I get:
Error
Tone Manager.exe
NotSupportedException
at
MicrosoftAGL.Common.MISC.H
andleAr()
at
System.Windows.FOrms.Control.
_InitInstance()
at
System.Windows.Forms.Control.
.ctor()
at
System.Windows.Forms.Button..
ctor()
at
Tone_Manager.Form1.InitializeC
omponent()
at Tone_Manger.Form1..ctor()
at
System.Reflection.RuntimeConst
ructorInfo.InternalInvoke()
at
System.Reflection.RuntimeConst
ructorInfo.Invoke()
at
System.Reflection.ConstructorIn
fo.Invoke()
at
System.Activator.CreateInstance
()
at
MyForms.Creat_Instance_()
at MyForms.get_Form1()
at Tone_Manager.Form1.Main()
I've tried V3Patels VipPimRingTone, and I get somewhat similar error.
Any ideas?
Thanks,
Joe
i think this is like RINGO but ringo is better coz u can classify also which sms tone u like for individual or group.
Related
Hi Friends,
I am Shailesh Ashar and this is my 2nd app. ( 1st being Group SMS details of which can be found here http://forum.xda-developers.com/showthread.php?t=306682 ). OK guyz , this is a big one (atleast for me).
Whats the App:
CallFirewall basically rejects unwanted calls.
Features & Options:
a. Accecpt all calls - pretty self explainatory
b. Accept call from My Contacts only - accepts calls from contacts only, others are rejected
c. Reject all calls - pretty self explainatory
d. White List - accepts calls only from the white listed nos
e. Black List - accepts all call except from the black listed nos
f. Black List Pattern - any no STARTING from the black list pattern list is rejected.
for eg. if you enter "123", so all nos STARTING from "123" will be rejected
this is a very nice option with which you can block nos from any particular network, country, city , area or whatever you can think of.
Finally there is also an option to reply with an SMS.
IMPORTANT:
1. To Delete Blacklist/Whitelist Nos TAP & HOLD the stylus for a few seconds to get the options.
2. Autostart - Create a shortcut to Callfirewall.exe with 'startup' as parameter (without the '') and copy to windows/startup/
3. Please uninstall previous versions before installing ver 1.3
4. Also Delete Callfirewall.xml from the Root folder. Previous versions Callfirewall.xml will not work with ver 1.3.
5. The XML file for 1.3 and 1.4 are compatible.
KNOWN ISSUES :
1. One Ring Delay in Rejecting Calls.
2. Ongoing call -> Blocked Caller Calls -> Existing Call is Hung Up.
3. Problems with some Radio ROMS where the caller identdification is delayed by Windows by a couple of seconds.
PLEASE DO NOT MAIL ME COMPLAINING ABOUT THE KNOWN ISSUES.
Ver 1.4
----------
1. Selective Call Barring.
Now you can restrict selected outgoing calls.
2. Add outgoing calls as Appointments.
Ver 1.3
----------
1. Added SMS Black List
You can add numbers as well as names.
eg. you put 'abc' as name, then all smses starting , ending and containing 'abc' as contact name will be blocked. The same works for numbers as well so beware.
2. Added Silent Startup - Create a shortcut to Callfirewall.exe with 'startup' as parameter and copy to windows/startup/.
3. 'Add as Appointment' Timings can now be adjusted by minutes ( + or - ).
4. Appointment is now saved in format: "Call from : Mr.X NUMBER Accepted/Rejected", Category : Call Firewall, Reminder Alarm is not set.
Ver 1.2
----------
1. Added option to reject unknown / private / withheld nos
2. Option to Add Accepted calls as calendar appointment
3. Option to Add Rejected calls as calendar appointment
4. Toggle Option to show 'CallFirewall' in 'running programs' / Task Managers
5. Save User Settings so that it remains intact upon restart.
6. Completely revamped UI to accomodate new options.
Ver 1.1
----------
Also added an option when selected, will ask you whether to send an SMS when a call is rejected
SmartPhone Version 1.2
-------------------------------
I have ported the PPC version to SmartPhone as is. So essentially all the cons as well as issues with ppc have also been carried fwd.
I'll be working on all the issues and will also be incorporating some of the new features and suggestions listed by you all. So please keep the feedbacks coming. Also, I am doing this in my free time so pls be patient with the updates.
From now on Both PPC & SmartPhone versions will be updated hand in hand.
Please give your valuable feedback / Comments / Suggestions
Why Free:
I have taken a lots of info from this forum so its a kind of payback !!!
PREREQUISITES:
WM5 / WM6 ( does not work on WM2003 / 2002 )
.NET Compact framework 2
download here :
http://www.microsoft.com/downloads/...6b-356b-4a2c-857c-e62f50ae9a55&displaylang=en
DISCLAIMER:
Use it at your own risk
IMP NOTE:
1. CallFirewall has to be running in the background to work, so if u are using apps like HTC X button, etc be sure that CallFirewall is running.
2. Please uninstall previous version before installing new version.
DONATION:
If you like my software and wish to express your thanks, then PLEASE
[size=+1]
To Download go to http://www.logic-unlimited.in/callfirewall.php
Please use a download manager as there is some problem with the server.
Feel free to link to the download page but please do not link directly to the cab files. I want some traffic on my website.
[/size]
f. Black List Pattern - any no STARTING
or STARTING?
Hey that sounds cool.. (especially the "FREE" part ).
Anyways, a request/question.. Is it possible for you to embed an "Interactive" functionality to the "Reply with SMS" option, i.e., when u miss/dismiss/ignore a call, it should ask you whether u want to sen an sms or not. (Just like SPB Phonesuite)...
shantzg001 said:
Hey that sounds cool.. (especially the "FREE" part ).
Anyways, a request/question.. Is it possible for you to embed an "Interactive" functionality to the "Reply with SMS" option, i.e., when u miss/dismiss/ignore a call, it should ask you whether u want to sen an sms or not. (Just like SPB Phonesuite)...
Click to expand...
Click to collapse
I dont know how much sense it will make but if many people want it i'll definately do it.
sms
I guess adding another feature for SMS will be nice,like call sms blocker
will surely consider in the next version.
I dont know how much sense it will make but if many people want it i'll definately do it.
Click to expand...
Click to collapse
Actually, the reasoning behind this is that while one is busy, or otherwise, if one doesnt want to take a call from a few ppl but he/she would not want to send a notification sms to all of them. and smtimes to the same person u might not want to send an sms and smtimes u might.. Many ppl I know want this feature especially those for whom sms is quite expensive (e.g. for me an sms is even more expensive than calling up the person for 2 minutes)
I dont know how difficult it would be to implement this.
One possible way would be to check in the registry whenever u miss a call, it would trigger a function to pop up the yes/no kinda dialogue/notification to send an sms to last missed number. (From the way SPB phonesuite works, I think that this is how it implements this).
shantzg001 said:
Actually, the reasoning behind this is that while one is busy, or otherwise, if one doesnt want to take a call from a few ppl but he/she would not want to send a notification sms to all of them. and smtimes to the same person u might not want to send an sms and smtimes u might.. Many ppl I know want this feature especially those for whom sms is quite expensive (e.g. for me an sms is even more expensive than calling up the person for 2 minutes)
I dont know how difficult it would be to implement this.
One possible way would be to check in the registry whenever u miss a call, it would trigger a function to pop up the yes/no kinda dialogue/notification to send an sms to last missed number. (From the way SPB phonesuite works, I think that this is how it implements this).
Click to expand...
Click to collapse
OK shantzg001 convinced,
will pm you when done.
shantzg001 said:
Hey that sounds cool.. (especially the "FREE" part ).
Anyways, a request/question.. Is it possible for you to embed an "Interactive" functionality to the "Reply with SMS" option, i.e., when u miss/dismiss/ignore a call, it should ask you whether u want to sen an sms or not. (Just like SPB Phonesuite)...
Click to expand...
Click to collapse
Done, pls download CallFirewallCab Ver 1.1 from the 1st post.
downloaded, and works fine,
one thing, I have notice that it takes little longer to start ur application when compare to others, even group sms has this weeknes,
is something missing in my device which is needed to start it faster....?
meehaa said:
downloaded, and works fine,
one thing, I have notice that it takes little longer to start ur application when compare to others, even group sms has this weeknes,
is something missing in my device which is needed to start it faster....?
Click to expand...
Click to collapse
Both the apps are written using managed code so it will take a while to load.
I am not sure but if u install .net cf 2 on device instead of storage card then it should make some difference.
shaileshashar said:
Both the apps are written using managed code so it will take a while to load.
I am not sure but if u install .net cf 2 on device instead of storage card then it should make some difference.
Click to expand...
Click to collapse
its already installed on the device
NICE - Well done.
There is a slight delay before the program kicks in (around a couple of rings).
.netcf2 installed.
Should be instantanuos.
@shailesh: Thnx dude..will download and check...
shantzg001 said:
@shailesh: Thnx dude..will download and check...
Click to expand...
Click to collapse
No worries Mate, u r welcome.
And thanx to u as well as ur suggestion has improved my app.
Finally !!
I will reject my boss's calls in weekend without the need to turn muy phone off!!
Im downloading now and will try it. Its a looks like a sweet program!! thanks!!
This program don't start on my device (qtwc 2020). This is message error:
file or assembly name 'microsoft.windowsmobile.status, version=1.0.0.0, culture=neurtral, publickeytoken=31bf3856ad364e35', or one of its dependencies, was not found
What is going on?
I have CF .Net SP2 installed...
Anybody can help me?
Sorry for my english.
art12345 said:
This program don't start on my device (qtwc 2020). This is message error:
file or assembly name 'microsoft.windowsmobile.status, version=1.0.0.0, culture=neurtral, publickeytoken=31bf3856ad364e35', or one of its dependencies, was not found
What is going on?
I have CF .Net SP2 installed...
Anybody can help me?
Sorry for my english.
Click to expand...
Click to collapse
u should have .net cf 2 (two)
pls check
do u have CF .Net 1 (one) SP2
Sorry. My bad. I have NET CF 2 SP2. File name is NETCFv2.wm.armv4i.cab. Why call blocker dont dont run i my device?
art12345 said:
Sorry. My bad. I have NET CF 2 SP2. File name is NETCFv2.wm.armv4i.cab. Why call blocker dont dont run i my device?
Click to expand...
Click to collapse
I'll supply u with 3 dll files , pls put them in the program files folder where callfirewall resides, run the thing and let me know.
Today I tried to suggest some new functionalities like SMS or other notification ring tone management to the great TNT WM6.1 cookers and someone said these are junks and should not be add to the great OS, if you want it then DIY (do it yourself).
I want to mention these functionalities are not junk because every simple phone OS has it. If it is junk why everybody searches the way to handle it ?
Why Windows Mobile can not handle such simple tasks ?
Anyway, I developed one and uploaded it for you in a simple executable file under .net compact framework v2.
This application supports MP3, Wave, AAC and WMA formats with no need to be copied to Windows or any other directory.
If there was something wrong, please let me know .
Hope you enjoy it.
Edit : A new feature added, Reminder Alarm. Consider assigning a new Task and set a reminder time and date for it. In this release you can set a new sound for it.
It says I need a newer version of the .NET framework
where do i get that?
my framework version is 2.0.7045.0
I have it installed on my device via TNT WM6.0.
You can download it from microsoft web site, from the following link I think :
http://www.microsoft.com/downloads/...6B-356B-4A2C-857C-E62F50AE9A55&displaylang=en
it works!
but only the incoming tone works. i tried to work the text tone
but when i do receive the text, no sound comes out
and i tried a soft reset
What format did you set for your SMS tone ? was it MP3, Wave or AAC ?
What OS version are you using ? And what's your device ?
I've tested it on Wizard (I-mate K-Jam) and TNT WM6.0 so many times and it worked.
i tried both WAV and MP3
I can not figure out your OS correctly.
What does the application show in the Messaging : New Text Message part, when you open the application ?
I ask others, please let me know the results.
Thanks so much.
it works. i uploaded the slim WM6.1 last night but is it normal for it to be so short?
sungersoo said:
it works. i uploaded the slim WM6.1 last night but is it normal for it to be so short?
Click to expand...
Click to collapse
You mean your SMS tone worked too ??
I did not understand what do you mean about it to be so short.
Happy that worked.
Do you have any new idea to be added or any problem in the application ??
Does anyone know how to change the alarm clock sound to any other sound file ?? any tweak ??
no. but that is what i wanted to ask from you
if you can make your program do alarm clock sounds too
I'm hardly searching for it, have not found the solution but if I found it, I will add it for sure.
Thanks you so much for your patience.
At last found the solution by testing on my own device
The application will be ready soon.
Provided the new application with following functions :
1- Changing Incoming Call Ringtone
2- Changing New Text Message (SMS) Ringtone.
3- Changing Alarm Clock Ringtone (new).
Uploaded the file here in this post and also updated the first uploaded file too.
So, please download the latest file to have all the functionalities. (Both of them are the same)
I will be really happy to hear from you and having your ideas about it.
Thanks so much, hope you enjoy it.
you are one amazing man! thanks
much appreciated
Thanks dear sungersoo for your support and help.
Any new idea and comment is welcomed.
Hope all of you to be happy.
can you tweak it so, when a sms does come in... you can touch the screen or hit the side button for the music to stop?
or the menu>dismiss when the notification pops up
I searched a lot, but I have not found anything.
I'm thinking about handling on screen key events, so when I done it, I will let you know.
Anyone who downloads the application, please let me know the results.
Thank you.
This is for spl 1.2 i did not make any changes other than the language and uc compliant i am going on vacation tomorrow and will be back on monday. I am only posting this so if someone else wants to try then they can. there is a little problem with making a new connection but if use my cingular.xml file on start up then it will work fine as it does for me. there is also something wrong with the phone calls but im not looking into it until i get back. so good luck guys
SPL 1.2
http://www.megaupload.com/?d=BKGOGFXR
SPL 3.5
http://www.megaupload.com/?d=L7T4TXKT
Sorry for throwing so many roms at you guys but i was board at work to day and thought i would give this another try. hope you guys are using my connection/contacts package as this should help with testing all these different roms http://forum.xda-developers.com/showthread.php?t=403458
irus said:
This is for spl 1.2 i did not make any changes other than the language and uc compliant i am going on vacation tomorrow and will be back on monday. I am only posting this so if someone else wants to try then they can. there is a little problem with making a new connection but if use my cingular.xml file on start up then it will work fine as it does for me. there is also something wrong with the phone calls but im not looking into it until i get back. so good luck guys
http://www.megaupload.com/?d=BKGOGFXR
Click to expand...
Click to collapse
ooooooh yes!!
I'll continue ur project for you
I hope that i can solve this problems
michyprima said:
ooooooh yes!!
I'll continue ur project for you
I hope that i can solve this problems
Click to expand...
Click to collapse
Well done IRUS!
Michy, please add an SPL 3.5 release, 60-70% of the forum active users have SPL 3.5
sergiopi said:
Well done IRUS!
Michy, please add an SPL 3.5 release, 60-70% of the forum active users have SPL 3.5
Click to expand...
Click to collapse
Post 1...........
irus said:
Post 1...........
Click to expand...
Click to collapse
irus u are really a genius
tomorrow i'll download the spl1.2, i have only 100mb traffic at days...
So i can work only on 1.2 version. However when irus is there can make spl3.5
Irus i hope i can really help u
michyprima said:
irus u are really a genius
tomorrow i'll download the spl1.2, i have only 100mb traffic at days So i can work only on 1.2 version. However when irus is there can make spl3.5
Irus i hope i can really help u
Click to expand...
Click to collapse
i hope so to. I would much rather make this rom as a community then by myself
Irus and Michy,
Both of you are my heroes. Thank you. I'm aware however of some errors and speed problem of the original chinese version, and am waiting for the "stabilisation version " atm. I'm currently using mutou version 1 which is fast and no serious bug. Good that you have gained the expertise to do the translation, as we can then do it for all future non-english ROM.
Irus, don't worry about so many ROMS. You've given us more choices, that's all. We thank you for these. Keep up the good work!
Irus and Michy,
Can you put back the standard keyboard and remove the chinese SIPs? If we can fix the setting to turn off auto-rotate and have touchflo setting it will be sweet. Also, for some reasons, my Sprite backup does not work. All these were among the problems in the chinese version.
Okay, I tried out the spl1.2 Translated (into English) version of Mutou's ROM.
First, I checkd through the settings and noted the following:
1. In the power setting, there are three tabs with names called "10 sec", "30 sec" and "1min". I think the correct name for them should be "External Battery", "Internal Battery", and "Backlight brightness" or similar wording.
2. TouchFLO setting is all messed up.
3. Soft key setting are still in Chinese. I think we should either remove this, or have it in English.
4. Auto-rotate setting still does not respond.
5. A4 keyboard should be completely removed and replaced by the standard keyboard
6. We should hide extended-ROM2
7. I can't find camera application, However, I am able to start the camera if I use the picture viewer program. The problem, however, is that all the usual camera settings such as choosing the mode, resolution, etc, are not responding to user actions.
8. When I tried to set up my data service provider's setting, I noticed that it only has ability to set up dialed up modem, so I'm unable to test any 3G data connection.
9. SMS services setting gives a blank screen.
10. Although the start menu has a link to phone, phone application does not exist. I can't start a dialer. However, I am able to go to the contact application and make a call, although I'm then unable to end the call since there is no dialer.
11. The Notes application does not start.
12. Camera application started via the picture viewer does not offer the opportunity to use microdrive as storage, although microdrive is functioning properly.
13. Window Media Player does not produce any sound.
14. After using the device for a while, the device stop producing sound although Sound Setting has checked the bottom two entries.
At this point, I installed my wktask and FtouchSL.
Then, all applications stop working, wherease the file explorer was working before this. Contact applicaion no longer could start. Calender could not start, and shows an error saying "No program memory availalble. Tap Start>Settings>system tab>memory , stop programs that did not automatically stop, and try again". Actually no program is running yet. I then uninstalled both wktask and Ftouchsl. The ROM does not seem to allow it to be successfully removed.
At this point, I could not proceed any further.
Good try though, at least most of the text are in English now. Looking forward to the second attempt.
eaglesteve said:
Okay, I tried out the spl1.2 Translated (into English) version of Mutou's ROM.
First, I checkd through the settings and noted the following:
1. In the power setting, there are three tabs with names called "10 sec", "30 sec" and "1min". I think the correct name for them should be "External Battery", "Internal Battery", and "Backlight brightness" or similar wording.
2. TouchFLO setting is all messed up.
3. Soft key setting are still in Chinese. I think we should either remove this, or have it in English.
4. Auto-rotate setting still does not respond.
5. A4 keyboard should be completely removed and replaced by the standard keyboard
6. We should hide extended-ROM2
7. I can't find camera application, However, I am able to start the camera if I use the picture viewer program. The problem, however, is that all the usual camera settings such as choosing the mode, resolution, etc, are not responding to user actions.
8. When I tried to set up my data service provider's setting, I noticed that it only has ability to set up dialed up modem, so I'm unable to test any 3G data connection.
9. SMS services setting gives a blank screen.
10. Although the start menu has a link to phone, phone application does not exist. I can't start a dialer. However, I am able to go to the contact application and make a call, although I'm then unable to end the call since there is no dialer.
11. The Notes application does not start.
12. Camera application started via the picture viewer does not offer the opportunity to use microdrive as storage, although microdrive is functioning properly.
13. Window Media Player does not produce any sound.
14. After using the device for a while, the device stop producing sound although Sound Setting has checked the bottom two entries.
At this point, I installed my wktask and FtouchSL.
Then, all applications stop working, wherease the file explorer was working before this. Contact applicaion no longer could start. Calender could not start, and shows an error saying "No program memory availalble. Tap Start>Settings>system tab>memory , stop programs that did not automatically stop, and try again". Actually no program is running yet. I then uninstalled both wktask and Ftouchsl. The ROM does not seem to allow it to be successfully removed.
At this point, I could not proceed any further.
Good try though, at least most of the text are in English now. Looking forward to the second attempt.
Click to expand...
Click to collapse
most of this problem are there because irus have used incompatible muis. So i'm trying to solve all this problems, but it isnt simple
michyprima said:
most of this problem are there because irus have used incompatible muis. So i'm trying to solve all this problems, but it isnt simple
Click to expand...
Click to collapse
Hullo Michy,
If you managed to solve these issues, would you avail it for both spl's..1.2 & 3.5
Cheers
for now, i have fixed smsservice and backlight issue + standard virtual keyboard input.
You can solve this on your ppc with overwriting file in attached zip in /windows folder and import the keyboard.reg registry file.
Then reboot...
I cant fix more for now...
have a problem
i can not run the Phone in the Programs menu.
michyprima said:
for now, i have fixed smsservice and backlight issue + standard virtual keyboard input.
You can solve this on your ppc with overwriting file in attached zip in /windows folder and import the keyboard.reg registry file.
Then reboot...
I cant fix more for now...
Click to expand...
Click to collapse
nice job on the fix.... i am sending you a pm
at the moment this project is dead. if you want a good rom go here, its a good one by sogarth http://forum.xda-developers.com/showthread.php?t=406348
irus said:
at the moment this project is dead. if you want a good rom go here, its a good one by sogarth http://forum.xda-developers.com/showthread.php?t=406348
Click to expand...
Click to collapse
There is'nt a need to pursue this further, because the purpose of the translation is to get something like what is shown in your link. Thank for the effort.
Sergiopi, I recommend that the translated ROM link in your ROM list thread be removed because they are still very half baked.
If you do not mind testing/flashing and would like to try this ROM please do so.
Build 20771, TP2 TF3D and some other Rhodium apps. Can you please test Data, activesync, bluetooth, GPS and other basic functions. Please report back even if nothing is found.
Thanks!
Updated
20 March 2009
07:00:00 GMT
Just added the usual missing stuff and cleaned it up.
Anyone test GPS yet?
http://www.4shared.com/file/93909516/d3e9cb1e/RC_At0mAng_V51_03-20-2009_HTC_TP2_TF3D.html
For new people who may need some additional programs loaded up before using the ROM.
Cab file to install UC config setup on Storage Card. To be run before you flash. If you are a UC user just back up your cab storage folder and sdconfig.txt file. Or dont use it at all
Select Storage Card as install directory
http://www.4shared.com/file/93912051/c54bf7e3/At0mAng_Pre_Install.html
Files included:
Advanced Config
GSensor Config Tool - Will give the writer credit once I find post again
Clear Temp
SoftReset
SPB ScreenCapture
Total Commander
At0mAng said:
If you do not mind testing/flashing and would like to try this ROM please do so.
Build 20771, TP2 TF3D and some other Rhodium apps. Can you please test Data, activesync, bluetooth, GPS and other basic functions. Please report back even if nothing is found.
No need to report about the TP2 Manila bugs.
Thanks!
http://www.4shared.com/file/93878824/dfd20272/Test_3-19_RUU_signed.html
Click to expand...
Click to collapse
Is this a New build or the same one posted from last night?
davezaff said:
Is this a New build or the same one posted from last night?
Click to expand...
Click to collapse
A newer build...just want to make sure it is ready for general relase.
Installed, so far data and activesync look the goods. Ill test GPS etc over my lunch break.
Some different program icons...what do you think?
Same for me... Data, activesync, and basic functionality looking good so far. A couple of big pluses for me - memory use is only about 33%. It was above 50% on NRG's rom with TF3D 2 (that's not meant as any kind of negative towards NRG, I love his newest rom too, just a comment). And Weather Watcher works correctly. On all other cooked roms I've tried Weather Watcher appears "zoomed out".
At0mAng said:
Some different program icons...what do you think?
Click to expand...
Click to collapse
Do you have new taskbar icons too? (hopefully I'm not being too greedy here).
I just flashed with this rom and checked the date. It said rom date is 03/14/09 was wondering maybe you just forgot to change the date?
thanks
A small problem (with a solution). You can't add file explorer as a favorite anywhere in the first two rows of favorites. Or more acurately, you can add it, but it won't launch. The solution is explained in post #500 here:
http://forum.xda-developers.com/showthread.php?p=3463613&highlight=file+explorer#post3463613
Joecd04475 said:
A small problem (with a solution). You can't add file explorer as a favorite anywhere in the first two rows of favorites. Or more acurately, you can add it, but it won't launch. The solution is explained in post #500 here:
http://forum.xda-developers.com/showthread.php?p=3463613&highlight=file+explorer#post3463613
Click to expand...
Click to collapse
Try my icon pack I posted a few rows up and it should work without the fix.
Thanks for the solution but it may not be needed with the icon pack.
Please report back.
Thanks!
Yes the date was not changed.
If you are talking about my status icons I may have them done before this build is officially released. If not I will have an add on pack when this is officially released.
Thanks for all the help.
Just flashed your new test ROM. One stupid question - how does the GSensor work? Also the default keyboard does not seem to be of Fuze - guess I need to install the fuze keyboard cab from your other thread.
pkshr said:
Just flashed your new test ROM. One stupid question - how does the GSensor works? Also the default keyboard does not seem to be of Fuze - guess I need to install the fuze keyboard cab from your other thread.
Click to expand...
Click to collapse
Go to tools...and in there is a nifty little app to change it.
Not sure what you mean how it works. I believe it is there for apps that use so they can auto rotate.
At0mAng said:
Go to tools...and in there is a nifty little app to change it.
Not sure what you mean how it works. I believe it is there for apps that use so they can auto rotate.
Click to expand...
Click to collapse
Regarding the GSensor thing, I was expecting "it is there for apps that use so they can auto rotate" but it is not working for all of the apps. it works for the calculator program but so far calculator is the only program that rotates as it should. I wish my Garmin XT would rotate .. is there any whitelist thing where I need to enter the information of Garmin XT ?
I will keep on testing this ROM and update.
pkshr said:
Regarding the GSensor thing, I was expecting "it is there for apps that use so they can auto rotate" but it is not working for all of the apps. it works for the calculator program but so far calculator is the only program that rotates as it should. I wish my Garmin XT would rotate .. is there any whitelist thing where I need to enter the information of Garmin XT ?
I will keep on testing this ROM and update.
Click to expand...
Click to collapse
Yes there is...I will find it and let you know or include it in the ROM
Edit
Sorry dont have the info for Garmin...search around may find it
voicecommand
Atom.
I'd love to install this ROM and give it a go, however I really need/use Ms Voice Command and WorldCard Mobile from the stock ATT Fuze rom. I know youve taken VC out of your previous roms, if these are not included in this rom either, would it be possible for you to cab these up as post installs?
At0mAng said:
Yes there is...I will find it and let you know or include it in the ROM
Edit
Sorry dont have the info for Garmin...search around may find it
Click to expand...
Click to collapse
You can use the G-Config program to add programs to the whitelist, available here. Makes adding applications a breeze, hit add new app, open the app and put the stylus in and reset. Works real nice with tf3d too
nableezy said:
You can use the G-Config program to add programs to the whitelist, available here. Makes adding applications a breeze, hit add new app, open the app and put the stylus in and reset. Works real nice with tf3d too
Click to expand...
Click to collapse
Nice...will have to add it to my SDConfig package
abhi2879 said:
Atom.
I'd love to install this ROM and give it a go, however I really need/use Ms Voice Command and WorldCard Mobile from the stock ATT Fuze rom. I know youve taken VC out of your previous roms, if these are not included in this rom either, would it be possible for you to cab these up as post installs?
Click to expand...
Click to collapse
If you send me a PM to remind me when I release this ROM I can cook one for you with both in there.
Edit...I am cooking one now if you want to test it...will post a link when done
Here is your link...
http://www.4shared.com/file/93897817/8aa5ae3c/Test_3-19_2RUU_signed.html
Has what you asked for.
Thanks a ton man
Downloading it now..
First impressions, very fast, quickly syncing with my Exchange, no flaws found im my first couple of minutes playing with it.
Was hoping to see the new start menu (the unpopular one, is seems, but the new one) and it wasn't there...is there a fix or cab to have that?
Thanks for allowing the preview to this tight rom!!!!! will get more details and will edit this post if bugs are found
Jholton
My old Nokia N95 had a feature that announced via the speaker the name of the person making an incoming call (provided name was in contacts). It was not brilliant and it had difficulty with some names (my friend doug sounded more like dog). However it was a good method of screening calls remotely especially if you are on the top a a ladder! Is this feature available on my HTC HD2 (virgin mobile) ?
New to XDA apologies if this has already been covered
I am sure MS Voice command will do that. You can download the cab from here http://www.energyroms.com/Addons/
ms voice command
Thanks R12srw - does ms vc work out of the box or are there still bugs with it?
jeeem said:
Thanks R12srw - does ms vc work out of the box or are there still bugs with it?
Click to expand...
Click to collapse
jeeem, you will be disappointed to note that there are still bugs reported with MSVC, however you can be glad that it will be announcing the respective incoming caller's names / numbers.
If you havn't installed the .cab yet please note 2 things:
First: during installation, you will be prompted (and WARNED!!!) to install the MSVC on your device instead of the storage card. It actually doesn't matter even if you install it on your storage card instead of device, so install it at your desired location. (I prefer to install it on the card as I am extremely miser to save every bit possible, on the device!!!).
Second: After the installtion, you will be prompted with a WARNING saying the installation was UNsuccessful. This is BUG!!!. Ignore it. Restart and enjoy...
Ravindra9 said:
jeeem, you will be disappointed to note that there are still bugs reported with MSVC, however you can be glad that it will be announcing the respective incoming caller's names / numbers.
If you havn't installed the .cab yet please note 2 things:
First: during installation, you will be prompted (and WARNED!!!) to install the MSVC on your device instead of the storage card. It actually doesn't matter even if you install it on your storage card instead of device, so install it at your desired location. (I prefer to install it on the card as I am extremely miser to save every bit possible, on the device!!!).
Second: After the installtion, you will be prompted with a WARNING saying the installation was UNsuccessful. This is BUG!!!. Ignore it. Restart and enjoy...
Click to expand...
Click to collapse
i installed but cant seem to get it to work.
jeeem said:
My old Nokia N95 had a feature that announced via the speaker the name of the person making an incoming call (provided name was in contacts). It was not brilliant and it had difficulty with some names (my friend doug sounded more like dog). However it was a good method of screening calls remotely especially if you are on the top a a ladder! Is this feature available on my HTC HD2 (virgin mobile) ?
New to XDA apologies if this has already been covered
Click to expand...
Click to collapse
couldn't you just make ringtones of their names with a recording software and then assign that ringtone to the appropriate contact?
when i recieve a call it dosent say the callers name any idea how to fix this.
however the calendar and statues works fine.
adamo86 said:
when i recieve a call it dosent say the callers name any idea how to fix this.
however the calendar and statues works fine.
Click to expand...
Click to collapse
Hi Adamo86,
Did you ever get MSVC to work?
Jeeem
jeeem said:
Hi Adamo86,
Did you ever get MSVC to work?
Jeeem
Click to expand...
Click to collapse
Jeeem, MSVC does work, and as I mentioned in my last post to you, you have to install in accordingly. However as you mentioned in your reply, it seems you are not able to get it done, which to me it appears you might not be having teh APPROPRIATE VERSION or the correct .CAB file. Should you wish, I can mail the correct working cab on your email.