voip and TouchFlo WM6 ver. 2.1 - MDA Compact II ROM Development

Hello @ALL
i have testet this nice rom with my charmer and it works.
it's great !!
then i buy a sdio wlan card 54 M (Ravonet / Pluscom) and it works.
I used the WM6Voip.cab, SipConfigTool_2_0_1.cab, Enchantsments.rar and a new rtcdll.dll to anable the sip-client in wm6.
it works, but there are some questions:
1. the sound works but it comes from the rear speaker. (bluetooth is ok)
2. the sound is quietly and the quality is poor.
Are there any hints about this ?
greets
mschmitz

1. the sound works but it comes from the rear speaker. (bluetooth is ok)
Click to expand...
Click to collapse
This is how voip works, with rear speaker.
2. the sound is quietly and the quality is poor.
Click to expand...
Click to collapse
Possibly the internet connection wasnt good enough.

Related

Hands-Free in 2003SE on Himalaya

I've tried several of the SE roms floating aroung the forums with my I-mate and finally setteled with the translated 2.20.07CHS one.
This rom obviously has Hands-free profile implemented to some degree, I bond my Bluetrek-G2 with the phone, and a long keypress on the G2 properly invokes the "Last call redial" feature of Hands-free.
My question is: to what extent is the hands-free profile implemented? Specifically I'm interested to know whether the "Caller ID" feature is implemented, so that headsets with built-in LCD displays for caller ID (e.g. Sony-Ericsson HBH-660 and the upcoming Jabra BT800) can be put to full use.
Any experience regarding this issue?
I saw some review/post from people with caller ID bt Headset
saying that is working fine , with the caller ID with the 2.20 CHS ROM
Were those posts on any of the XDA-DEVELOPRS forums?
NO, I saw them @ some chinese forum
which few model of caller ID Bt , working fine
"peoples say"
Here is my experience with an XDAII and a SE HBH-660
With ROM 2.02.t1, can setup the HBH-660 as a handsfree device, caller id works great, but the mic on the headset does not work at all!
With ROM 2.06, can only setup the HBH-660 as handset device, so clearly caller id does not work here, but at least the mic on the headset works!
Haven't tried 2.20, got tired of reflashing and hard-resetting my device after trying every steps suggested in the forum, even merging the 2.02.t1 and 2.06, which still has the same problem as the 2.02.t1 ...
Currently sticking to ROM 2.06 and using Pocket Bluetooth Tools 1.10. At least I can redial from the HBH-660, answer calls and transfer calls back and forth between the HBH-660 and the XDAII ...
skuld said:
Here is my experience with an XDAII and a SE HBH-660
With ROM 2.02.t1, can setup the HBH-660 as a handsfree device, caller id works great, but the mic on the headset does not work at all!
With ROM 2.06, can only setup the HBH-660 as handset device, so clearly caller id does not work here, but at least the mic on the headset works!
Haven't tried 2.20, got tired of reflashing and hard-resetting my device after trying every steps suggested in the forum, even merging the 2.02.t1 and 2.06, which still has the same problem as the 2.02.t1 ...
Currently sticking to ROM 2.06 and using Pocket Bluetooth Tools 1.10. At least I can redial from the HBH-660, answer calls and transfer calls back and forth between the HBH-660 and the XDAII ...
Click to expand...
Click to collapse
You may have a look at this thread to see how to turn on the Handsfree on ROM 2.06
http://forum.xda-developers.com/viewtopic.php?t=14386
Tried that as well ... got even worse results, sometimes the headset works and sometimes it doesn't ... have embarassed myself in front of people by wearing the headset on my left ear and still putting the phone to my right ear ...
skuld, I suggest you try 2.20.07CHS, it is the most stable 2003SE out there, and Bluetooth works great for me using the Handsfree profile (sound only comes out of the headset and the headsets' mic is operational).
I intend to purchase the Jabra BT-800 as soon as it is released and hope toi take advantage of full Handsfree functionality with it finally.
If you do decide to upgrade to 2.20.07CHS, please let me know if caller id works for you with your HBH-660.
so?
So, basicallly, the non-chinese speakers, are stuck with non fully working BT profiles, since handsfree option identifies every headset as hansdfree, and then the problem with the "stereo" effect appears.
In my case, both (device and XDA) mics and both speakers work simultaneously either in SE HBH 35 headset or BT Carkit.
Can please confirm 2.20 version solves that totally?
Any idea on why it has not been released in WWE?
2.20 indeed solves this problem, I'm currently running 2.20 for several days with no problems, the translation to English provided by Buzz is impressive and comprehansive. I don't speak a work of Chinese yet have no problems using my device, I have yet to come up with a Chinese message-box/notification of any kind. Bluetooth works flawlessly with my Bluetrek G2 using Hands-free profile.
Ummm..
Will give it a chance.
Keep me informed should you find any other problem using this version.
:wink:
yes so far so good
2.2 is a offical OS ROM for dopod 696 , which the same hardware as xda2
so it is working fine with the caller ID & bt sound
Anyone can provide me the complete REG file of 2.20CHS?
darren_the said:
yes so far so good
2.2 is a offical OS ROM for dopod 696 , which the same hardware as xda2
so it is working fine with the caller ID & bt sound
Click to expand...
Click to collapse
I converted the reg file from default.fdf of the ROM, but it seems to be incomplete when I compare it against 2.02 and 2.06.
I understand that Kinglee uploaded the PHM reg backup file. Can someone give me a hint how I might convert that file to a text readable format?
Re: so?
Looking Glass said:
Can please confirm 2.20 version solves that totally?
Any idea on why it has not been released in WWE?
Click to expand...
Click to collapse
I can confirm that 2.20 uses different bluetooth DLLs than 2.02 or 2.06.
After configuring BT headset, the user is prompted with BTBond_UI.exe screen with checkbox for headset/handsfree enabled, and greyed out checkbox for ActiveSync, Dial-up Networking and Serial.
There is quite a number of differents in the registry settings as well.
I think I just about manage to port 2.20 BT over to 2.06 (or 2.02 for that matter).
However, I need you guys to give me pointers on a couple of things:
(a) for handsfree profile - can 2.20CHS users enable the handsfree profile and use only the headset microphone to speak to the recipient?
(b) what about current 2.02 users?
(c) What can 2.20 CHS users do with their current BT settings? Please describe what you are allowed to do.
- No merry christmas present...hopefully, there's one for happy new year, aye? :wink: -
can someone post the file BTBond_UI.exe i need to try it on 2.02t version
BTHFP
Ok here's the skinny.
On 2.06 got BT HandsFree profile to pickup and end calls via headset with stereo audio but headset mic still off (Xda II mic on).
Anyone got the headset mic to work?
Need 2.20 registry to understand how BTBond_UI.exe and other *.dll works.
I posted blue tooth mic not responding to voice input topic a couple of days ago, from responses I got ... I decided to upgrade from 2.02 to 2.20 CHS, (it's a good upgrade it's got WMP 10 but no letter recogniser or transcriber input ??).... but alas G2 BT would still not respond to voice.
Then I had an idea..... I went back to the the 1.72 ROM (radio 1.17) and guess what ? The G2 blue trek headet now works Not really what you'd call progress....... but a fix !!
I would like to upgrade back to WM2003SE, but I have no idea what combination of ROM software will deliver the latest features of the upgrade plus the full functionality for the bluetooth device ??
So anybody out there know what combination works ??
BTHFP
MJW said:
Then I had an idea..... I went back to the the 1.72 ROM (radio 1.17) and guess what ? The G2 blue trek headet now works Not really what you'd call progress....... but a fix !!
Click to expand...
Click to collapse
Are you saying under 1.72 your G2 is able to enable HandsFree profile perfectly? What BT driver did you use Bro?
Steady...... I am just a beginner at this !!!
What I am saying is that with the 1.72.00 WWE ROM the G2 now works i.e I can hear through it and when I speak into it I can be heard. Pressing the button on the headset picks the call up and ends the call. What it doesn't do with this level of software is last number redial.
As for the BT software I have no idea what I am running ? Is there a way of finding out ? The 1.72 update was from the 02 site.
I have downloaded the 3500 BT patch and was wondering about upgrading back to 2.20.07 CHS + the patch and see if that works. Thoughts ? But I need the letter/Transcriber input and I am not sure where you get those and how to add them to the XDA2.
BTHFP
I am running both the WM2003SE MSBT and BC/WC 3500 BT on my Xda II.
Probably you are referring to the HeadSet profile Bro. We're discussing about the HandsFree profile - correct me if I am wrong.

Fixed MS A2DP stack in WM6 roms ?

Hi there,
tried to google but couldn't find definitive answer, so does any of the WM6 roms are based on the final WM6, meaning they include the fixed MS A2DP stack and run A2DP flawlessly ? If yes, which ? Thanks in advance. A2DP with good sound quality is the only feature I really want.
You can use this cab !.
Thanks, but its not what I'm looking for, I do have A2DP on my Prophet, but not the hissfree one of WM6 final..
As far as I am aware the only ROM with new MS BT stack is the PDAMobiz 2.0b4. That works well for A2DP.
I have flashed the Fantastic B4 rom. The A2DP of this rom has great sound quality without hissy sound. But there is a problem of skipping which is very annoying. Is there anybody who has the solution of this?
Anyone know if the new 4.0.0.6 Touch Rom has the new A2DP ?
linku said:
Anyone know if the new 4.0.0.6 Touch Rom has the new A2DP ?
Click to expand...
Click to collapse
No, the sound quality of 4.0.0.6 Touch is not comparable to that of Fantastic B4.
You can tweak the registry to get 10x better sound in the PV rom.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2 DP\Settings]
"BitPool"=58
"MaxSupportedBitPool"85
"UseJointStereo"=dword:0
all value in DEC
Hi
I have tried the registry change and the cab files suggested in the forum but the sound is still hissing on my iTech R35, not sure how we can installed the new MS bluetooth stack on other roms apart from the Fantastic rom which gives me the best sound so far.
Thanks

Can TG01 record 2-way phonecall?

Can it record both sides while phonecall? HD2 (I have) can NOT yet... What about another device with Snapdragon?
Try this
Haven't tried it myself
only 1-way on my HD2... mic+speaker echo...
it works as a charm with the 2way utility
only that if u are having audio problems (high gain but quiet) like some of us , the same effect shall remain in the recording , also i suggest recording at the volume level one below max in ur in-call volume bar so the 2 sides are pretty even ... get Vito audionotes > autorecord/to: storagecard/wav high quality , and on u go !!!
souljaboy said:
it works as a charm with the 2way utility
only that if u are having audio problems (high gain but quiet) like some of us , the same effect shall remain in the recording , also i suggest recording at the volume level one below max in ur in-call volume bar so the 2 sides are pretty even ... get Vito audionotes > autorecord/to: storagecard/wav high quality , and on u go !!!
Click to expand...
Click to collapse
we discuss it exactly with the author of .cab, you posted (with mskip) here http://forum.xda-developers.com/showthread.php?p=4973398#post4973398
HD2 - NOT WORKS! Only 1-way+mic echo.
Do you test it on TG01? It works???
If works, this is a good news! That is NOT because of Snapdragon processor. But we steel need solution for HD2 and that is why I posted this thread.
Sky Forever said:
Can it record both sides while phonecall? HD2 (I have) can NOT yet... What about another device with Snapdragon?
Click to expand...
Click to collapse
yes, see resco audio recorder
a_petrov303 said:
yes, see resco audio recorder
Click to expand...
Click to collapse
Wow!!! It Works!!! Congratulations!
Sound quality is bad but perhaps this is really as others hear us....
Any idea to improve it?
seems to be 1-way... When 2-way is possible, quality of record both sides almost equal!
Pere said:
Wow!!! It Works!!! Congratulations!
Sound quality is bad but perhaps this is really as others hear us....
Any idea to improve it?
Click to expand...
Click to collapse
maybe cuz resco recorder is a ****? i dunno its good for me
Sky Forever said:
seems to be 1-way... When 2-way is possible, quality of record both sides almost equal!
Click to expand...
Click to collapse
i posted that it works on tg01 becuz it works on tg01... pretty simple if u ask me
I only wish to understand ability of 2-way recording via another device with Snapdragon processor.
souljaboy said:
maybe cuz resco recorder is a ****? i dunno its good for me
i posted that it works on tg01 becuz it works on tg01... pretty simple if u ask me
Click to expand...
Click to collapse
Hi
Could you describe how did you start recording telephone conversations on the TG01. What is your version of ROM and what is the order of installation. I would be very grateful. Regards.
i have the 2 way recording cab on
and i have vito audionotes on , installed in that order , ull see my recommended settings in my prev post , ROM i dont remember but ive used 4-5 roms this far and it worked on all
tried it in stock and 5005.1600.05 radio ver
its best to adjust the incall volume to one under the max cuz it will be disorted and also move the mic a bit away cuz it will be too loud compared to the other side , also i turn mic gain off in vito
souljaboy said:
i have the 2 way recording cab on
and i have vito audionotes on , installed in that order , ull see my recommended settings in my prev post , ROM i dont remember but ive used 4-5 roms this far and it worked on all
tried it in stock and 5005.1600.05 radio ver
its best to adjust the incall volume to one under the max cuz it will be disorted and also move the mic a bit away cuz it will be too loud compared to the other side , also i turn mic gain off in vito
Click to expand...
Click to collapse
You can also try Resco Audio Recorder instead of Vito. Both tested and working,
Thank you for your reply.
I tried to do as you wrote, but I still have a little problem. My voice is clean and clear but the caller voice is distorted. I tried to change the volume level of the system but it does not help. Is it possible to set the recording level? Or maybe there is some other simple way to solve this problem.
Thank you for your help - greet.
geobid said:
Thank you for your reply.
I tried to do as you wrote, but I still have a little problem. My voice is clean and clear but the caller voice is distorted. I tried to change the volume level of the system but it does not help. Is it possible to set the recording level? Or maybe there is some other simple way to solve this problem.
Thank you for your help - greet.
Click to expand...
Click to collapse
other voice is distorted for me anyway , in the actual phone calls too ... lol
Hello
I have tried this cab and it does not seem to be recording. There is no options to select record during or before calls. any advice?
cheers
I use Vito Audio Notes 1.38 (NOT the touch version wich is buggy) and I record 2-way with good quality using default settings. I can also record on demand.

[Q] Alternate Bluetooth Headset For MW600?

Hi guys,
I'm using MW600 bluetooth headset on my X10. I change original headset with my Sennheiser MX 760. Sound quailty is very good. But I don't use MW600 with 2.2 & 2.3 custom roms
I connect it with X10. I start to listen to music. But I have short interruptions on music at various times.
Do you have a bluetooth headset is working properly with 2.2 and 2.3 custom roms?
PS: 3,5 mm audio jack is important for me. Bluetooth device must have this.
Sorry for bad English
Actually I have the same problem as well with my bluetooth fm transmitter using WB CM6. Never had a problem with bluetooth using 2.1.
Any solution to this?
Hi,
I use Trips 1.6.3 and when I have WLan activated I get interrupted bluetooth music. Without WLan everything is OK.
Ralf
SQr17 said:
Actually I have the same problem as well with my bluetooth fm transmitter using WB CM6. Never had a problem with bluetooth using 2.1.
Any solution to this?
Click to expand...
Click to collapse
I get some problems on EWJet rom, but it is not same problem.
This problem caused from Sony's specially codecs As far as I've learned.
Solution of this: using original rom
Kat-CeDe said:
Hi,
I use Trips 1.6.3 and when I have WLan activated I get interrupted bluetooth music. Without WLan everything is OK.
Ralf
Click to expand...
Click to collapse
Can you share your rom's link with me?
custom roms have some trouble with bluetooth headsets, because my MW600 works on stock rom, and also work with my computer, with AD2P support (the devise show the title of the song/movie)
Is everyone using MW600 with this phone? Nobody have a different headset
Hi NS_85,
I forgot to say that I normally use a Nokia BH-103 and also have dropouts:-(
Does anybody know a rom which has no bt problems with a headset.
Ralf
2.1 roms are really the only solution for now. You can use EWjet if you want something snappier.
Sent from my X10i using XDA Premium App
dante-fu said:
2.1 roms are really the only solution for now. You can use EWjet if you want something snappier.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
I tried EWjet but I had another issue on it.
Do you use MW600 on EWjet perfectly?
Yes, MW600 runs perfectly on the EWjet. No skipping during music playback.
dante-fu said:
Yes, MW600 runs perfectly on the EWjet. No skipping during music playback.
Click to expand...
Click to collapse
Which version do you use?
I tried it but I had this problem:
I pair my MW600 bluetooth handset with my phone. I open android stock music player, mediascape, winamp or etc. My phone returning to the previous screen when I press one of the media control keys While the phone on home screen when I press media control keys, screen loading again and again
media control keys do not work on EWjet.
The last one I used was EWJET 2.1.B.0.1 V001ex. MW600 was fine with it.
I am now on stock 2.1.B.0.1 though. Prefer when I am in control of the modifications
Edit: The problem you are experiencing is caused by that WP7 music player. Disable headset button control in it's settings.
mr.solution is here
hi jay‘s i had these problem in my x10 after install rom 2.2 in the same headset mw600
but i fix it with (bluetooth+headphones fix) proggram
u can find it in android market or download it from....
just opened and press (turn fix on)
i hope i can help
see ya
or downloaded from 4shared website
and write the name of proggram
copy these >>bluetoothheadphones_fix12<< and put it on the search engine
ah228 said:
or downloaded from 4shared website
and write the name of proggram
copy these >>bluetoothheadphones_fix12<< and put it on the search engine
Click to expand...
Click to collapse
not working on EWjet
ah228 said:
hi jay‘s i had these problem in my x10 after install rom 2.2 in the same headset mw600
but i fix it with (bluetooth+headphones fix) proggram
u can find it in android market or download it from....
just opened and press (turn fix on)
i hope i can help
see ya
Click to expand...
Click to collapse
I tried it but, it doesn't fix the problem. Which rom do you use?
I have a Nokia BH-505.
Used to have sporadic blackouts on Froyo, curiously much less with GB (cobrato 1.7.15). Happens every now and then, nothing major - do bear in mind that audio notifications will interrupt your audio stream and that this may be causing the interruptions.
IMHO this has more to do with the BT stack and the ROM than the headset itself.
I don't understand what you are asking for re. the 3.5 mm jack - we ARE talking about BT headsets, right?
Hope this helps
NS_85 said:
Hi guys,
I'm using MW600 bluetooth headset on my X10. I change original headset with my Sennheiser MX 760. Sound quailty is very good. But I don't use MW600 with 2.2 & 2.3 custom roms
I connect it with X10. I start to listen to music. But I have short interruptions on music at various times.
Do you have a bluetooth headset is working properly with 2.2 and 2.3 custom roms?
PS: 3,5 mm audio jack is important for me. Bluetooth device must have this.
Sorry for bad English
Click to expand...
Click to collapse
Hi acmbc,
acmbc said:
I don't understand what you are asking for re. the 3.5 mm jack - we ARE talking about BT headsets, right?
Click to expand...
Click to collapse
quite simple to replace the in ears with better ones. I heard the MW600 and the sound is not the best. My nokia sounds far better especially in the low frequencies.
btw. the problem ist mostly solved with current GB rom.
Ralf
I have used different BT stereo receivers with it (both 2.1 and 2.3.3 stock):
MW600 works fine, but I don't see track info
Samsung MS3000 works, but make sure you turn the unit on before activate BT in order to connect automatically (this one lacks bass)
Nokia BH-214 works well, but it's replaced by BH-111
Sony DRC-BT30 works well, but I lost it recently.
Isn't it a known fact that Bluetooth and WiFi don't play well together? I seem to remember discussing this issue when I bought my first BT mouse (Logitech MX900) for my then brand new laptop...
Anyway, I think issues were solved by some firmware upgrade of mouse and an improved wifi-driver that addressed the issue of BT-interference. Somehow I think that changes to kernel and/or wifi-critical files may disrupt some of the "built-in" fixes for simultaneous wifi/BT connections, which results in erratic BT-behavior.
So, I think that issues are not really related to the headset rather than the internal bluetooth/wifi-stack. As for how to fix it... Alert the dev's!
//Static

Poor audio quality over bluetooth

Hi to all!
I've noticed very poor audio quality while streaming music over bluetooth on my Xiaomi Redmi Note 3 Pro(on MIUI7 and MIUI8 too). No matter is bluetooth connected to car or BT earphones. Volume level adjustment or EQ adjustment doesn't help. It looks like low bitrate of sound - a lot of distortion of high frequencies. If I connect wired earphones - music quality is very good.
Could someone help me to fix it? Thanks.
try ViperFx
afoninpe said:
try ViperFx
Click to expand...
Click to collapse
I'm not sure that it's problem of audio driver, because as I wrote in wired earphones(or wired to car) quality of sound is very good.
Looks like problem of BT stack. I found one solution to increase sound bitrate for A2DP by editing audio_policy.conf, but unfortunately it didn't work for me.
My bt headphones work fine, (awei, bluedio), and recivers (linkz, ibt,ihome), I am on MM miui 6.8.15, try turning off any 2ghz radios (like wifi routers or switch the router to use to 5ghz only) maybe it's interference.
I'm having the same issue, using bluedio t2s, sounds like the phone loses connection for a millisecond, even though I have it in my pocket or in my hand. I've tried different Roms and kernels, but the issue persists.
otyg said:
My bt headphones work fine, (awei, bluedio), and recivers (linkz, ibt,ihome), I am on MM miui 6.8.15, try turning off any 2ghz radios (like wifi routers or switch the router to use to 5ghz only) maybe it's interference.
Click to expand...
Click to collapse
Unfortunately, turning off all except BT didn't help for me...
As I understand, you use China Developer ROM, aren't you? Could you send me(or attach here) some files from your ROM? I'm interested in:
/system/etc/audio_policy.conf
/system/lib/hw/audio.a2dp.default.so
/system/lib/hw/bluetooth.default.so
Thank you!
Problem has been resolved.
I improved audio quality over BT only when I switched to Global Developer firmware & updated my phone to android 6.0.1.
Then I used patched libraries from this thread of MIUI forum .
This libs really works great on it.

Categories

Resources