i have this problem.
While trying to flash Charmer_Touch_ver._2.1
i get the following error message
Could not update itsutils.dll to the current version, maybe it is in use? try restarting your device, or restart activesync.
after doing a hard reset the software is still WM5
My current version is the latest ROM from T-mobile UK site
Any advice on this please
copy cert_spcs.cab and enablerapi.cab to your charmer, install them to device memory. Run the upgrade again.
Thanks
Installing these files worked
Another happy customer
after a little bit of cadgouling - i have sorted out my friends charmer
works a treat !
thanx a bunch again
sonix
Related
Sorry for my bad english
(i will now be responsible if something happens in your device)
reply for much more clarification
******************
Specially dedicated to the Filipinos!! MABUHAY TAYONG LAHAT
******************
Well first of all i like to say Thank You very mush to WAXX who helped me in upgrading my o2 1.66 to 1.72. Thanks You WAXX.
********************************************************
Well... firstly download this file came from WAXX.
http://forum.xda-developers.com/download.php?id=1261
After the download extract the zip file inside it, you shoul be seen 7 files.
I recommend you to extract it in desktop/new folder.
Plug the cradle in your USB.
Insert your XDA II in cradle
Run HimaUpgradeUT.exe, Then follow the steps.
if error appeared, remove the device in cradle and soft reset it, then run the HimaUpgradeUT.exe again.
if error appeared again do a soft reset again.
If no error then it will now smoothly running up to 100% of the proccess.
For me the process takes only 15 min. There are stage 1 to stage 5 for completion.
That's it.
********************************************************
Goodluck.. GodBless..
(i will now be responsible if something happens in your device)
You can approach me for some questions.
Take note this ROM was came from MAXX.
Thanks WAXX for your help.....
CONGRATULATIONS !!!!
I would like to know to your device information (list of rom) !!!
Ok, downloaded the ROM
How do i backup MY rom incase anything goes wrong ?
will the upgrade work with a XDA II for O2 UK Network ???
cheers
Hi
I downloaded the file and unzipped it, when i try the upgrade it says error 120 country id error. my rom is 1.60.00 wwe dutch what is the problem?
Thanks
I would strongly afvise anyone who wants to upgrade to use the 'manual; by dcs together with any ROM Upgrade to prevent (future) country-id errors.
see http://forum.xda-developers.com/viewtopic.php?p=62760#62760
double_ofour,
pare i certainly hope you modified WAXX's ROM to set your Device to O2, instead of CDL You may have had a successful ROM upgrade now, but setting your device to CDL has major implications for future ROM upgrades (Hint: You cant use official O2 ROMS).
Pare how can i convert CDL to o2? step-by-step please
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
I tried to search on Wiki and the forum. But negative hits.
Currently i have a english HTC tytn, and it has to change to a Dutch rom.
I searched for a simple language pack (like windows xp ). But i couldn't found 1.
So i searched on Wiki. I found some close hits but without the correct sollutions.
After searching for a while i found the WM 5 dutch Rom for a Hermes. ME_DT_NLD_1182542_104_10303_Ship.exe
I thought okey this must be easy. Just use unpack and run the Shipped Rom.
The Wrapper gave me the following error on installation. Error 260 device not found. Ok that isn't a problem i will use the Olipro wrappers from the bootload or sspl.
SSPL didin't work and the bootload trick worked. Actually after the 100% installation it gave the error, and the device was resetting. The device started windows. an it was actually a dutch version. Before i jumped up and down of excitment i wanted to be sure it installed the customize. When it started to install the customize it actually frozen at the today content. After waiting for an half our. I decided to give the device a hard reset. The screen after the hard reset turned white. So there was somethin wrong.
Next step was to take the .NBH file from the zipped package and unpack it in a folder to add the correct customization. It didn't help at all.
At this moment i am out of ideas. Because why wasn't the original rom installing as it suppose to be. Is this a common problem. or did i lost my mind and didn't follow the right steps.
Please let me know.
I actually used to reset the rom to its orriginal backup rom. but i get a vendor id error.!!!!
Fixed the problem;
I used Hard-spl-v7, after unpacking the shipped rom with NBH tool. Then removed the IPL / SPL folders from the new map and inserted the RUU-wrapper from the Hard-spl-v7 zip file.
Still have a wrecked rom on a other tytn. K.I.A. i quess. If its solved i let you know.
Hi,
I have a MWG AtomLife running windows mobile v6 i have been trying to install version 6.1 using DSUU.
I get 1 of 2 problems using 2 different version of 6.1 the first problem is
Everything starts off fine, phone softresets but it boots into windows and the DSUU says it failed to connect. No damage to phone.
the seconed problem is it says the country region (or somthing along thoses lines) is wrong and its not compatible with my phone.
I would just like to point out this is MWG not a 02 i got this phone from Portix (the uk disti for MWG) 2 days ago.
Any advice is muchly appricated as i said i have read the wiki, every post i can find on it all the how-tos in the various version but to no avail.
Thanks
FL1X (not fl1c i typod while creating my username how annoyingly rookie of me)
PS> this is the version of 6.1 i was trying to install (using the inbuilt installer and also "pcinstaller1.zip" from another thread) http://forum.xda-developers.com/showthread.php?t=413950 I know it says Exec so i tried this one http://forum.xda-developers.com/showthread.php?t=360664 again to no avail.
Update: just tried http://forum.xda-developers.com/showpost.php?p=2433912&postcount=112 again same problem of the phone softresetting and booting back up loseing connection failing to install.
Hi, if you want to upgrade to WinMo 6.1then you cannot upgrade via DSUU. It is not possible till a DSUU is developed.
For upgrading you would need to use the SD card. Procedure is given in the last link you had visited.
P.S. Do not use ATOM Exec and HP update utilities on Atom Life. You might brick it.
Thanks Maniac, i will look into doing it that way over the weekend, in the event i brick it how can i return it back to the original version of wm6?
'brick it' means ur phone is dead. the term is kind of a metaphor. u can use ur phone as a brick
Hello everybody...
I just bought an PM200 (German T-Mobile Edition), WM5 says its a PM200.
After that I installed the aku 3.3 and everything worked fine...
Then I tried to install the "Charmer_Touch_GER_Ridingshark_Beta_3.2".
But while Writing the new TouchFLOW OS ROM i got the error... "Could not update itsutils.dll to the current version, maybe it is in use?
try restarting your device, or restart activesync
But i realized it to late and already made a Hard Reset...
Then the Touch-Flow UI tried to install and the i got the WM error:
"The file : \windows\XDADev_BatFix.exe does not exist".
But i cant go on with the install but it doesnt matter which button i push...no one responds...
Then i downloaded the XDADEV_Batfix.cab but that dowsnt work...sure because it isnt the exe file...
Can anybody help me with tha prob?
I also treid to install the WM6 update again but i always get the itsutils.dll error...
Geetings to all
Markus
Here is how to do it:
Flash back to WM5 using bootloader. Press camera button during reset.
If you see the screen with the 3 colours plug in the USB cable and wait till the Device is installed. Now run the T-Mobile uptade (Best is to use Akku3.3).
After it is finished connect to active sync and go to the Folder were the WM 6 upgrade is in. Now install the two cabs out of the folder where the WM6 ROM is in, on your device and make a soft reset. After that run the upgrade File. It will go same as before, but there will be no error and it will update completly.
Have a nice time with WM6
ChrBeck
Can i writ you a pm, it will be much better for me to write you in german...
In der PM in Deutsch geantwortet.
Answered in German in a PM.
Ok, the prob is solved.
I just want to write it down here, if anybody has the same prob...
Thanks again to ChrBeck, I also used the search in this Forum to get it solved but i could find anything useful.
The only thing I had to do was to install the to cab´s (Cert_SPCS.cab and EnableRapi.cab witch are already included in the Charmer_Touch_GER_Ridingshark_Beta_3.2.rar.
The first Step was to update the WM5 Version to the aku 3.3. Then I transmitted the 2 Files with activeSync and installed them on the Charmer just with thip on each File. And the last Step was to flash the new WM6...
DONE....
Its so easy if you know what to do and with help from some users...
Greetings MArkus
This is the thing I have written before. But it is not easy to understand, if you don't know much about it.
@all: And now much fun with WM.
Have a nice day
ChrBeck