Total Noob here - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Comming from a Blackberry and looking for WM6 (I know the "official" version is not out yet) I have an AT&T 8525. I see alot of variations in this forum so I was hoping to get very stable version of WM6.
Sorry I know this is probably easier than I am making it out to be. Any help would be greatly appreciated.

crupp said:
Comming from a Blackberry and looking for WM6 (I know the "official" version is not out yet) I have an AT&T 8525. I see alot of variations in this forum so I was hoping to get very stable version of WM6.
Sorry I know this is probably easier than I am making it out to be. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Best option: test several and then decide.
Alternate option: pick any basic current release. Most newer one's are quite stable. By and large, they are built from the same core. Stability is not really a major issue anymore for most. Schaps, vp3g, funkey, TNT, shamanix, austinsync, dutty... you really cannot go wrong. I am sure I left some off, but I have tested the ones above. Just make sure you get the most recent releases, which will be obvious from the posting date and from the comments. With an 8525, you may have better luck with a "cingular optimized" rom, like vp3g, but really it is hard to wrong at this point in the development cycle.

Thanks, Do I just place the RAR file in my synch file folder? and synch it up.

If you on AT&T do yourself a favor and dont install any other ROM but vp3g's..

crupp said:
Thanks, Do I just place the RAR file in my synch file folder? and synch it up.
Click to expand...
Click to collapse
Download the rar extract it on your pc.
Connect to active sysnc and run the exe
Follow the instructions when prompted
If you are like me coming from WM 5 You probably want to upgrade your radio as well. The redio upgrage is the exact same process and pretty much the exact same screens except you are upgrading your phones communication signal. I will come back to this post and give some links
I would recomment vp3G as well. I am running it and it is fantastic, he also gives some great add ons
http://forum.xda-developers.com/showthread.php?t=334946
The radio i am using is
http://rapidshare.com/files/60589318...1.54.07.00.rar
I am in the LA area and it works well here. After upgrading your radio you will need to wait a little while for full speed, I did anyway. Actually i reloaded rom after rom and it wasn't until i got frustrated and PUT THE PHONE DOWN did i notice it was at normal download speed

There in ies my problem how to execute the RAR?

cirial said:
If you on AT&T do yourself a favor and dont install any other ROM but vp3g's..
Click to expand...
Click to collapse
That is the one I am goign to use. THanks for confirming this is the right one.

the rar file is just a fancy zip file that needs to be unpacked. google winrar and you should find a download link

Related

Got the official WM6 for Athena

RUU_Athena_HTC_WWE_2.21.405.2_1.50.00.00_Ship
updating now - will keep you posted.
best
http://kaz911.blogspot.com
kaz911 said:
RUU_Athena_HTC_WWE_2.21.405.2_1.50.00.00_Ship
updating now - will keep you posted.
best
http://kaz911.blogspot.com
Click to expand...
Click to collapse
nice nice and very good post hoop that we also get the rom upfate here or anywhere else please share it with us also !! THANKS ALOT !!! waiting for the link or links !!!
Sorry cant share anything but information
but the file I received is a week old - so I guess we are soon in for a treat.
But since I have a quite good relationship with HTC guys and they know me, I do not want to put my good relationship in trouble
Initial Impressions
Touchscreen reacts better to finger touch
Phone seems slightly quicker
Not true VGA mode :-(
No VoIP support in mine :-(
Windows Update seems to be working
Wi Fi seems better (doing the "bedroom" test later... worst place in my house... for Wi Fi coverage that is..)
No "Touch" like front screen :-(
OS Version : CE OS 5.2.1238 Build 17745.0.2.3
kaz911 said:
RUU_Athena_HTC_WWE_2.21.405.2_1.50.00.00_Ship
updating now - will keep you posted.
best
http://kaz911.blogspot.com
Click to expand...
Click to collapse
Will this work with the standard Ameo? Or does it need to be unlocked first?
-Krip
but follow my blog for the full review
best
http://kaz911.blogspot.com
well this seems to be just like the WM6 rom that is already posted. i upgraded 4 days ago and thing like opera load and faster and it has great mouse support. so since this guy wont post his version then jump on over to the http://forum.xda-developers.com/showthread.php?t=320367 and upgrade now. **** dont for get to cid-unlock your device first.
Rapidshare link with this ROM??
if it is this one your are talking about
HTC ADVANTAGE X7500 XWM6_Upgrade_2007.07.27
http://rapidshare.com/files/45328048/X7500_WM6_Upgrade_20070727.zip
CE OS 5.2.1437 Build 17944.0.3.1 Rom date 07/06/07 Radio Version: 1.47.51.00
with ROM date 07/06/07 it was pulled back from HTC due to major bug.
Which is why the WM6 was a bit delayed.
Rom version on this one
2.21.405.2
Date: 07/20/07
best
kaz911.blogspot.com
Please rapidshare link with ROM RUU_Athena_HTC_WWE_2.21.405.2_1.50.00.00_Ship
i must be in luck cause i have 2.21.405.1.... maybe i should upgrade LOL
since u cant post the "rom" maybe some screen shots if your not to busy
Posted full mini review
http://kaz911.blogspot.com/2007/08/htc-athena-advantage-htc-x7500-wm6.html with screen shots.
best
http://kaz911.blogspot.com
So I gather Blackberry Connect is not included on any of these new roms? Is it?
nope does not seem to be included. Should it be in programs list? or?
I don't believe you will see BBconnect cooked on the ROM until an Operator with BBconnect support release a ROM for the Athena. Hopefully someone would hack BBconnect to make work with all WM6.
kaz911 said:
if it is this one your are talking about
HTC ADVANTAGE X7500 XWM6_Upgrade_2007.07.27
http://rapidshare.com/files/45328048/X7500_WM6_Upgrade_20070727.zip
CE OS 5.2.1437 Build 17944.0.3.1 Rom date 07/06/07 Radio Version: 1.47.51.00
with ROM date 07/06/07 it was pulled back from HTC due to major bug.
Which is why the WM6 was a bit delayed.
Rom version on this one
2.21.405.2
Date: 07/20/07
best
kaz911.blogspot.com
Click to expand...
Click to collapse
Hi kaz911:
i am not sure to understand what version you are talking about. I have 5.2.1437 for a long time running (i am not very happy with it, I think is close in performance to WM5 but with more bugs) and looks newest that you mention. Will you put a link?
thanks.
Last update to WM6 is just here: http://rapidshare.com/files/52215870...asher.rar.html
RUU_Athena_HTC_WWE_2.21.405.2_1.45.00.00_Ship.exe
OS Version : CE OS 5.2.1238 Build 17745.0.2.3
Radio – 1.45.00.00
ROM Version : 2.21.405.2
ROM Date : 07/20/07
**** I no longer am posting my ftp site sorry *****
irus said:
Ok so the guy who started this thread is lying to us. why not sure. I am posting some pics with, as you can see, the same os and build number, and instead of take screen shoots i just took pic of my x7500 on that screen. I put them in a zip file cause i want good qual pics if you also want the rom and the athena unlocker, WHICH YOU MUST RUN FIRST, then login to my server at [ c:\htc x7500\*take all of it
user:temp
no password
** if too many people login it will go slow, this is not IBM servers were talking here
*** take anythink else you want but not movies and no adobe cause it will take too long, if i fine you taking that i will ban you IP address thanks
Click to expand...
Click to collapse
Hi Irus: your connection to the server doesn't work, are you sure password is empty?
About the version of WM6, I have from dopodasia and I don't understand if it is newer that yours or not. Mine is rom version: 2.19.707.4, date 7-6-7, ExtRom 2.13.707.101, but CE is 5.2.1437 (17944.0.3.1), can you help me to understand ...
Ok people, a couple of you r trying to hack into my server. it won't work so i am going to give everyone one last chance. please dont' upset me, after all if you log on to my server i have your ipaddress so let all play nice
**Beginner if its not working try to goto IE then tools/internet options/advance about half way down makesure you have "use passive ftp" checked or just try restarting your computer. hope this helps
also you can go to http://www.megaupload.com/?d=TOX0JESU
to download the atheanunlocker "which you must run before you install new rom" but you still need to get the rom from my server.
irus said:
Ok people, a couple of you r trying to hack into my server. it won't work so i am going to give everyone one last chance. please dont' upset me, after all if you log on to my server i have your ipaddress so let all play nice
**Beginner if its not working try to goto IE then tools/internet options/advance about half way down makesure you have "use passive ftp" checked or just try restarting your computer. hope this helps
also you can go to http://www.megaupload.com/?d=TOX0JESU
to download the atheanunlocker "which you must run before you install new rom" but you still need to get the rom from my server.
Click to expand...
Click to collapse
Thanks, it works. Was a problem with my fwall.
But, is your posted version newer mine from DopodAsia? Looks wm is newer that yours. Please, confirm.
if your version is 2.19.707.4 then yes mine is newer

[Q] Fell for HTC HD2 WinOs BS - NEWBIES FOR DRIOD OS

Hi everyone. I am a complete idiot when it comes to phones so I thought I was doing well when I shelled out some cabbage for the HTC HD2 only to find that the WinOs SUX! Thats how I found this site. I am wondering if anyone can provide step by step video / detailed instructions on the best driod os for a tmobile usa htc hd2 with updated rom. My knowledge stops at turning the phone on so all the talk about radio and rom changes etc is foreign. I am stuck with this phone now and need some help. Again, sorry for being an idiot and I thank you for any guidance you can give.
By updated ROM I mean that I have the updated rom supplied by tmobile....2.13.531.1 (90963) WWE...radio 2.10.50.26.....OS version....5.2.21892 (21892.5.0.89)
welcome to the forum; everything you need to know is DEF here......now with that said I have to be the first to say that nobody is going to be inclined to help you until you read up and educate yourself first a little bit. people go through the trouble of writing tutorial and making stickies for the soul purpose of informing people (such as yourself) with limited/minimal knowledge. do yourself a favor and take a little bit to familiarize yourself with your phone and read as much as you can and I'm sure that whatever questions you might have about getting started will be found. as far as which android os is better, well that's subjective. your best bet is to flash and try any and all and form your own opinion. good luck and welcome again.
TOG565 said:
By updated ROM I mean that I have the updated rom supplied by tmobile....2.13.531.1 (90963) WWE...radio 2.10.50.26.....OS version....5.2.21892 (21892.5.0.89)
Click to expand...
Click to collapse
just to help you get started...http://www.youtube.com/watch?v=6y0YK1IqjB0
and as the above stated...do some reading first before starting threads. Most often than not...people have been in your shoes before..all you gotta do is search. And Welcome, and good luck with your phone endeavors!
Use either darkstone sence or hdfroyo from darkstone by far best android builds. I got the crazy robot voice during calls with 2.13 tmo us rom. I would use one of the custom roms people on here sugest. Or do what i did and install the previois tmo us 2.10 rom. All can be found on this site. Look around there are plenty of guides and search on youtube there are videos on there also. Just a note android is much better than win mo but the builds are about 95%. They all still have some small issues, bluetooth not working, compass os wacky ect. But very useable as an everyday os. Goes on sdcard so your NOT replaceing win mo. If you restart the phone youll be back in win mo and have to start android again but its a simple prosess and there are android launcher apps on this site that will give u a win mo icon to launch android in one click. Pretty slick. Just do some reading you be ok.
Sent from my HTC HD Droid 2 using XDA App
1. Go to HD2 ROM Forum
2. Install HSPL3 (Hard SPL)
3. Install New Radio (Not required - but please pay attention - reading required!)
4. Install New ROM - I recommend ChuckyROM, VB, or Energy (need WWE)
5. Select Android Build and download
6. Don't expect Miracles
7. ???
8. Profit!!
Also....
You can't just simply "upgrade" the WM rom. You still need it to run the android rom, just like the fellows above said, read up on it and you will get going soon.
GL

[Q] HTC HD2 Clone from China

I bought an HTC HD2 Clone from China (T Mobile). He is under WM 6.5 and I want to change the ROM. The problem is that I do not know if it's possible for this phone. In the Device Information I can read this:
BSP Version: ROM Version-V01.00; ROM Date-Sep 10 2010;BOOT Version-2010.08.01;PCB Version- V01.
In Radio Module: Serial Number: HT9BWNW00617; Revisin Data-2010.08.01; Model ID: T8585; Manufacturer-HTC.
In Hardware: CPU Model-QUALCOMM82...; CPU Speed-1024MHz; RAM Size-576MB; Nand Size-1024MB; Data Bus-32Bit; LCD Color-65536; Resolution-480x800.
It has not SD card but 8Go of Internal Memory. I can not find any information about Radio Version and I do not know if I can flash it. Can you help me, please?
I am pretty sure it lies about RAM and CPU .
No, you can't flash normal ROMs on it. You're gonna have to figure out the way to flash it (probably their tools?) and cook your own ROMs.
OndraSter said:
I am pretty sure it lies about RAM and CPU .
No, you can't flash normal ROMs on it. You're gonna have to figure out the way to flash it (probably their tools?) and cook your own ROMs.
Click to expand...
Click to collapse
There are no tools to check it????
Try it out...
Well I do not know if it will work or not, but might be worth a try. Is to try a SD version of an Android build here. Try downloading the files and put them on the phones memory and then open android. The instructions are pretty simple for the installation and opening. I am currently using a build of AmericanDroid. It is pretty nice. I do not think it will brick the phone, because it does not self boot unless you download an app to make it do so. You will have to use a file explorer. I recommend using total commander. It might be worth a shot
marildo78 said:
I bought an HTC HD2 Clone from China (T Mobile). He is under WM 6.5 and I want to change the ROM. The problem is that I do not know if it's possible for this phone. In the Device Information I can read this:
BSP Version: ROM Version-V01.00; ROM Date-Sep 10 2010;BOOT Version-2010.08.01;PCB Version- V01.
In Radio Module: Serial Number: HT9BWNW00617; Revisin Data-2010.08.01; Model ID: T8585; Manufacturer-HTC.
In Hardware: CPU Model-QUALCOMM82...; CPU Speed-1024MHz; RAM Size-576MB; Nand Size-1024MB; Data Bus-32Bit; LCD Color-65536; Resolution-480x800.
It has not SD card but 8Go of Internal Memory. I can not find any information about Radio Version and I do not know if I can flash it. Can you help me, please?
Click to expand...
Click to collapse
I think the biggest issue is that if you have problems with flashing, there is no way to restore the stock ROM. I would not expect a flash to work, but one never knows with clones.
timesarchangel said:
Well I do not know if it will work or not, but might be worth a try. Is to try a SD version of an Android build here. Try downloading the files and put them on the phones memory and then open android. The instructions are pretty simple for the installation and opening. I am currently using a build of AmericanDroid. It is pretty nice. I do not think it will brick the phone, because it does not self boot unless you download an app to make it do so. You will have to use a file explorer. I recommend using total commander. It might be worth a shot
Click to expand...
Click to collapse
Hello, could you tell me where can I find this SD Android version? Thanks!
marildo78 said:
Hello, could you tell me where can I find this SD Android version? Thanks!
Click to expand...
Click to collapse
Please tell me you're kidding. Please
Sent from my HTC HD2 using XDA App
marildo78 said:
Hello, could you tell me where can I find this SD Android version? Thanks!
Click to expand...
Click to collapse
search xda...if u could get here and create a question thread, then u can surely find the HD2 Android section...
thenotoriouspie said:
Please tell me you're kidding. Please
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Haha... +1 for that...
But then again, if you´re new here... maybe the amount of information about HD2 here at xda is a bit confusing.
Here is the Android SD section: Click!
Of course, there is more information about how to do inside the HD2 Android section...
tictac0566 said:
Haha... +1 for that...
But then again, if you´re new here... maybe the amount of information about HD2 here at xda is a bit confusing.
Here is the Android SD section: Click!
Of course, there is more information about how to do inside the HD2 Android section...
Click to expand...
Click to collapse
I am not stupid (I think) but I'd like to now if I can try to put Android System on my chinise clone, that's all. On my phone I can not find any info about the Radio version and I do not now if it is "changeable". In tne Android section I can not find this info and I do not want to post the same question there.
marildo78 said:
I am not stupid (I think) but I'd like to now if I can try to put Android System on my chinise clone, that's all. On my phone I can not find any info about the Radio version and I do not now if it is "changeable". In tne Android section I can not find this info and I do not want to post the same question there.
Click to expand...
Click to collapse
No one has posted anything for a Chinese clone that I am aware of. You are going to have to do the initial work yourself, using the instructions on how to update the "normal" HD2 to Android, then going from there. As I said before, the big problem in my view is what to do if the Android load fails. With the genuine HTC phone, you can simply flash the original ROM. Do you have a ROM file you could flash, in case the update goes bad?
When I looked at those phones, it was always with the assumption that if I ever bought one, whatever came with the phone would be IT - no upgrades possible unless they came from the same manufacturer.
just do it...
you should not need to worry about radio too much (other than you won't get the best working connection/wifi/battery usage/etc. without the proper and corresponding radio, but you can just load the android folder onto your 8gbs and hit the clrcad/haret & see what happens. Why'd you go with the knock-off? The original is worth the pennies.
dumbquestion said:
you should not need to worry about radio too much (other than you won't get the best working connection/wifi/battery usage/etc. without the proper and corresponding radio, but you can just load the android folder onto your 8gbs and hit the clrcad/haret & see what happens. Why'd you go with the knock-off? The original is worth the pennies.
Click to expand...
Click to collapse
If the clone is using different hardware it simply won't work; the drivers are built for the stock HD2. Then how does he get back to stock? Doesn't he have to install Maglor or something like that to work dual boot Android? (Sorry if I have names wrong, I don't do Android on my HD2).
This happened to me when I bought an HD2 from someone in the Atlanta area. They sent me an HD2 clone, I did some research and found that it's really not an HD2 but a phone made to look like an HD2. After some work with paypal and ebay I was able to get my money back. My best advice to you is send the phone back and get a real HD2.
HD 2 clone.
There are generally 3 types of HD2 clone:
single SIM, resistive screen
dual SIM, resistive screen (exactly what I have myself)
dual SIM, capasitive screen (rear camera hole is at different place if compare with original).
If you describe what you keep, probably, I could help you.
I rarely use 3G, and slow core provides me long life battery, dual SIM is very useful. Besides, I DO NOT like capasitive screen as I often use office software, that's why this clone is ideal for me! I've purchased standard size extended battery on Ebay and it lasts 4-5 days of regular usage. Yes, there are some issues with it: camera should be abt 3 MPx, you can't watch high bit-rate movies etc. But all other options are good enough!
Good luck!
I don't trust chinese clones. If u have enough money buy original phone.
HD2 CLone
Hello,
I'm a quitley happy owner of the HD2 Clone (CECT8585).I'm using it since a month, and it works very well with WM 6.5. I have a lot of program like Tom Tom 7 and accessories. Is fast and stable.Using Dual Sim does not kill the battery.Any way, I'm traing to use Androind on it.
I tryed in 2 ways.First one with FastRam android, secon one with double booth. Both gave me the same error.Just froze after loading CLRCAD/HARED in Linux loading Bar-
I thought It could be a Radio problem.I have the last version of the system wity resistive display. Any help from you side?
Thank you.
You have to roll-back, no other way to my mind!
i just restores with unlicensed spb backup 2.1 in my clone T8585+, now i have startup the screen for register and put software pass, but i dont have it , thus i need reset the phone, how is the combination?
HnAw said:
i just restores with unlicensed spb backup 2.1 in my clone T8585+, now i have startup the screen for register and put software pass, but i dont have it , thus i need reset the phone, how is the combination?
Click to expand...
Click to collapse
Use the search. You didn't even bother trying that, did you.

[Q] Available roms for the Cube U39GT?

I am planning to buy one of these tablets to tinker with. After some searching, I found the following rom alternatives:
http://www.arctablet.com/blog/forum...-firmware-version-1-04-test-version-20130723/
http://www.slatedroid.com/topic/91121-tempestu39gt-roms-v0001/
http://www.slatedroid.com/topic/89434-custom-firmware-from-4pda-based-on-stock-104/
Do you know of any other worthwhile rom to try out, or are these three all that's available?
Anyone?
Kollagen said:
Anyone?
Click to expand...
Click to collapse
thanks for sharing, gonna try the TempestU39GT
There's also 1.05 multiwindow rom that some say is better than stock 1.04, download is here :
rom
Do not buy the Cube U39GT-3G version of this tablet, I ordered one from http://www.cube-tablet.com and it came with a wrong IMEI number. I cannot use any SIM data card because of this with this tablet.
I bought the Wifi version, so I am not in danger. Thanks for the warning though, it certainly speaks of extremely crappy QA.
racht: anytime, and thank you for the link to 1.5.
It seems like another rom might be on the works:
http://www.freaktab.com/showthread.php?8204-Are-there-any-worthwhile-roms-for-the-Cube-U39GT
Apparently it will be based on stock 1.04 instead of 1.05, but if it comes to completion it might be worth it to try it out.
Kollagen said:
It seems like another rom might be on the works:
http://www.freaktab.com/showthread.php?8204-Are-there-any-worthwhile-roms-for-the-Cube-U39GT
Apparently it will be based on stock 1.04 instead of 1.05, but if it comes to completion it might be worth it to try it out.
Click to expand...
Click to collapse
ROM has been uploaded yesterday but the dev doesn't own a U39GT. So anyone willing to test can do it now
I can't believe that slipped by me. Thanks for the heads-up. :good:
http://www.arctablet.com/blog/forum...2-custom-root-firmware-version-1-06-20131123/
This looks promising as well with 1.06 Cube firmware update and AOSP launcher.
New original Cube firmware 1.06 is downloadabl from official cube site.
http://www.51cube.com/ch/DownShow.asp?ID=205
I can recommend Google for translating the chinese, you can download the ROM from baidu which could take a few hours.
Awesome, thanks for the heads-up.
They require registration to access the downloads? Dammit, I refuse to create an account just to go and download something. Do you have an account there, locutus2000? If so, would you be willing to mirror it somewhere?
I was able to fix the IMEI issue, so it is safe to buy, again. The support from the vendor was not helpful, the wrong IMEI number is not only wrong for me but for all of the sold models. They all have 111111111111111 as IMEI number, no big deal with the MTK Droid Tools I was able to load a new IMEI, that was generated from an internet site. It works with the SIM cards now.
Important to know: the Cube 9 Talk with the 3G SIM card uses MediaTek MTK8389T CPU whereas the Cube 9 without the SIM card 3G feature uses a RockChip RK3188 CPU. The ROMs are not interchangeable.
So whatever issues you may have, it may be a completely different story for the person that owns the other chipset. Strange enough that Cube built two similar products with completely different hardware.
The Cube U39GT 3G ROM Version 1.03 for the 3G version can be found here:
http://www.51cube.com/ch/DownShow.asp?ID=206
If you have donwloaded and unpacked the firmware, you may end up with chinese folder names. Flash tool did not accept the scatter file when I tried to select it using these folder names.
To resolve this: Simply create a new folder name and copy/paste the ROM of the Cube to the new folder, the update should then work with the Flashtool. I have used Version 3.1328.0.183. The update takes a while so be patient. Worked with mine.
rooting cube u39gt
Hi Guys
sorry bit of a tablet noob.
Im struggling to find a method to root the u39gt so I can get to experiment with these roms
Any advice welcomed!
Cheers
Root Genius
anonymi23 said:
Hi Guys
sorry bit of a tablet noob.
Im struggling to find a method to root the u39gt so I can get to experiment with these roms
Any advice welcomed!
Cheers
Click to expand...
Click to collapse
Thank you for important info, I have 3G version too. And how did you succeed root, can you give me any advice?

Anyone have a copy of the "Aurora.N7.Port.v2.1_data/sms fix for Sprint" or "Aurora.N7.Port.v3_data/sms fix for Sprint" files?!

IS THIS FORUM "DEAD" or something?! I've been BANGING my head against a WALL for about a month now trying to fix an apparent "Sms over Sgs" function being disabled on my N910P running LineageOS, if I use anything but a stock OS I'm not able to "send" SMS unless I switch to 3G. Does anyone possibly have the following files kicking around? The links to them are dead everywhere I've looked. That or any other bright ideas? Do I need to flash the baseband again after installing Lineage or something?
Aurora.N7.Port.v2.1_data/sms fix for Sprint
Aurora.N7.Port.v3_data/sms fix for Sprint
Hya! So I am in the same boat... I am trying to do research... So far I have not been finding anyone with answers past the N7 Port. I cant even seem to be able to install the ROM cuz I am on Q15 Baseband. I udnerstand that you can't downgrade once we committed to the latest.
I also am having huge bluetooth crashes. Trying to keep attached with my FitBit and keeps dropping.
Lets see if we can find some answers together!
I tried the download of the SMS fix for Sprint and flashed it but doesnt seem to work.
Unidave199 said:
"SMS fix for Sprint"
Click to expand...
Click to collapse
Which SMS fix for Sprint? The N7 Port or a different SMS fix?
$HAKER said:
Which SMS fix for Sprint? The N7 Port or a different SMS fix?
Click to expand...
Click to collapse
Sorry, I should have given details. I found the zip on this forum here.
[ROM] [AROMA] [ULTIMATE Note 7 Hybrid] [N930PVPU1APGC] [v1.1] [updated 5/12/2017
Ultimate Note7 Hybrid aka UN7 The next generation ROM for the Sprint Galaxy Note 4! About ROM Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then please don't ask for help in...
forum.xda-developers.com
I tried loading the ROM but I think since I went from PK1 to QI5 I will not load. I was able to download the zip from the links the OP gave here
AlternateSmsMmsSendingFix_UN7_Hybrid_by.txdbstx.zip | by txdbstx for Galaxy Note 4
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
I hope I am not breaking rules by posting the links, but all credit goes to the Developers and none to me.
Let me know how your progress goes! I need a solid ROM to get full function from this phone!
Dave
Think I've tried them both already, I've gone around in so many circles it's hard to keep track...
I have learned one key through my digging, seems most things need to "match" the same generation for the OS used.
$HAKER said:
Think I've tried them both already, I've gone around in so many circles it's hard to keep track...
I have learned one key through my digging, seems most things need to "match" the same generation for the OS used.
Click to expand...
Click to collapse
Fix for GSM based N7 ROMs to enable sms on Sprint Network (CDMA)
This thread is specified in talking about datafix for Note 7 port ROMs using N910P on Sprint Network (CDMA). There are other threads on datafix, but they are mainly for using N910P on GSM network. Kudos to XeoNoX for the datafix files for...
forum.xda-developers.com
May be helpful?
Unidave199 said:
May be helpful?
Click to expand...
Click to collapse
Unfortunately those links were dead the first time I tried them a few months ago... Thanks though. The only real shred of hope I seem to have left is an older post that someone apparently flashed the baseband files from the last OS that "worked" and they got things functioning on the newer OS. Now I just have to figure out how to flash the baseband separately from the OS?! I think I can do that with Heimdall?
$HAKER said:
Unfortunately those links were dead the first time I tried them a few months ago... Thanks though. The only real shred of hope I seem to have left is an older post that someone apparently flashed the baseband files from the last OS that "worked" and they got things functioning on the newer OS. Now I just have to figure out how to flash the baseband separately from the OS?! I think I can do that with Heimdall?
Click to expand...
Click to collapse
I thought we couldnt go back from the QI5 firmware... or did I miss something?
This really seems like a super simple solution that shouldnt be this hard. It really must be a software problem. I am super aggrivated ... probably like you.... that such a great hardware platform is being rendered so inefficent. There are no new phones that have the ability and versitility of this platform and I am committed to keeping this hardware for years to come. I dont need it to do a lot... I just need it to do the few things I require of it! I am thinking of starting a new thread in the sprint forum to get some current and collective knowledge of the best setup available for the N910P

Categories

Resources