Hi There,
I have upgraded my Atom Life to WM6 (latest version from O2 site). Everything works well. But I have problems with syn via bluetooth and IrDA. Please see my problem below:
Before syn with bluetooth or IR, I can syn with USB well.
* For IrDA:
+ When I choose syn with IR from activesyn menu on Pocket PC it shows "Attention required" then I click on this it shows "Connection Not valid: cannot open the connection 'infrared port'. This connection does not exist or no longer support. Select a difference connection or try again"
+ I am sure that: IR in range and I can do this many time on WM5 as well as send and receive file between my Atom life and My Laptop.
* For Bluetooth:
+ When I choose syn with Bluetooth from activesyn menu on PPC it show "Cannot find an existing Bluetooth partnership with a PC that supports ActiveSyn Would you like to set up Partnership now?"
+ I am sure that: Bluetooth in rang and pair with my laptop, I can send and receive file between my Atom life and Laprop. I can syn via bluetooth with WM5 many times.
If anyboby know what are the problems and solutions for these please let me know. If you can point me some document that would be great.
Thanks in advance
I dont own Atom Life, however sounds like you havent got the COM Ports configured properly...with MS generic bt drivers add (Incoming connection) port (usually COM3 is selected by default) after adding the port go to Connection settings in Activesync and under (allow connection to one of the following) select COM3. Assuming you have already paired your device now go to bt connection settings in device and tap your PC name then tap refresh, wait until it discovers A/S, tick the box then add a com port on your device too. I usually select COM6 but I do not believe it matters. good luck if that doesnt work then you should ask O2.
PS...if you already have an existing partnership and its not syncing, then delete partnership from PC and device and start again.
Thanks for your information but I still not work. I did check carefully incoming connection port and I also configured allowing connect wireless on ActiveSync to connect this port. Every step, I think correctly because I configured and sync with WM5 in the day before I update WM6. I don't know why It happens when I upgrade to WM6 then I could not syn with Bluetooth and IrDA. Maybe, I should get help from O2 support centre.
Related
Hi.
I have already download the new w2k5 to my XDAII and now I can´t wyncronize it via USB with the new ActiveSync 4.0
I have tried via infrared and it works, but when i put my XDA II in the credle, and I try to do it via USB it doesn´t works... Any idea?¿
Thanks
are u sure the File/Connection settings/allow USB connection is checked??!!! :wink:....... otherwise,u cannot synchronise via USB...
RAGO :lol:
Yes, everything it´s ok
I don´t know what could it be... Maybe reinstalling activesync 4.0...
thanks 4 all.
The problem with the USB conection of my xda II and activesync 4.0 still kickin´...
I have read something abaut the same problem in another post? Or it´s just a dream?
Thanks.
It's kinda strange what's happening with u... :?
Now am not sure,but try the following:
*u must have service pack 2 installed(it's a prerequisite)
1-on ur mobile:go to active sync/menu/connections check synchronize all PCs using this connection,and in the window tab below choose USB.
2-try changing the USB port on ur PC.
3-try restarting ur PC,and ur mobile as well...
4-make sure the File/Connection settings/allow USB connection is checked
5-make sure ur cable is functionning well(try another device if u can,or another cradle if possible)
Good luck....
RAGO :lol:
I´m trying to synchronize in a IBM T21 Laptop... Maybe USB 2.0 not soported? Does anybody knows if ActiveSync 4.0 and wm2k5 only works with USB 2.0 ?
Many Thanks
spend some time today to make it work.
first check on device manager if under network adapters exist "windows mobile-based device" and is ok (not with ! sign),
then go to control panel at network and internet connection > network connection.if you have network card there will be one local area connection (or maybe much depend how many network cards have in pc).when conected pocketpc (wm2005) will create another local area conection,connect and disconect to see what number have ex. local area connection 2.right click properties then better tick on show icon on notification area to see what is about connection.go to advanced windows firewall >settings.at general tab turn off,at advanced tab unmark this area connection only,( I want to say to unmark local area connection 2 or what number have this connection between pocketpc and pc) leave marked other local area conection (if is present) to keep protect your pc from outside.press ok in that window,now you are back in properties page check at general tab >tcp/ip protocol > properties to be selected obtain an ip address automatically press ok ok again. now in pocketpc go to start > settings > connections > network cards here select connect to "work" and adapter remote-ndis host select "use server assigned ip address" ok ok again.dissconect and connect pocketpc to pc.look at taskbar right-down corner of monitor,near clock,you should see appear network connection icon.first time at every connection between two little monitor will be a red dot going from one to another,in this time computere search for dhcp server to receive ip address,in short time (4-5-6 seconds) link will be active icon will be clear not fading like previous and the two monitors will blink.if this is not happened check on control panel > Performance and Maintenance > Administrative Tools > services if dhcp client is started,if not start it manual and change startup type to automatic.if until now everything is ok disconnect pocket pc, dezinstall old version of active sync install version 4.0 build 4343 restart pc.after pc started up connect pocketpc to pc,it should work.if still not work dezinstall active sync and from control panel uninstall windows mobile-based device disconect pocketpc restart pc install active sync and connect pocketpc,in this way windows reinstall networ driver and now must work ok.
btw I forgot to tel to check at active sync allow usb connection.
good luck.
Thank you very much for everything gabiz_ro.
Ok, I´m going to tell you what I have realized trying to follow your instructions.
Firstable I don´t have that you call:"windows mobile-based device" Or I didn´t find it... I have looked at Lan or Internet connection.
Then, I have tried to find out the conection that you talk abaut that it must be created when I connect my PPC, but I didn´t find it too. I tried to find it conecting the XDA II via USB and via Infrareds (remember that via IRDA does works)
Finally I changed at my PPC what you say abaut remote ndis host, I saved it, and disconnected and connected again, but it didn´t appear anything at taskbar right-down corner of monitor...
I don´t know what to do... And I´m sure that the problem is hosted the new activesync 5.0 or in wm2k5, cause one hour ago, when I came back to w2003se, I synchronized the ppc correctly with the credle via USB...
I´m feeling very weird with it, cause when I put the PPC in the credle (with wm2k5 and actvesync 4.0) the normal sound of the PC when you connect something reconigzed, don´t sounds... what I hear is the double "tun tun" that sounds when you connect something not recognized.
Many thanks
wm2003 is identified by windows as usb device.
but wm2005 like a network connection.
first
right click on "my computer" > properties > hardware > device manager.expand network adapters,and here when conected pocketpc to usb you'll see "windows mobile-based device"
second
local area conection 2 (or other number,in raport with how many network cards are installed on pc) you''l find in start > control panel > network and internet conection > network connection.but appear only when xda is connected if xda is disconected that "local area connection" dissapear too,and xda must be identified and driver installed (windows mobile-based device show without any ! symbol in control panel).infrared connection will not work here.on that local area network who represent connexion between pc and xda right click > properties and mark show icon on notification area.....
if you hear other sound like you say,maybe xda is not identified or windows didn't install corect driver.take a look to see in control panel what is wrong.expand universal serial bus to see if ther is some unknow device or something wrong.
there is control panel print-screen and taskbar area prinscreen.
Ok!
I think that finally thanks to you we have discovered the problem...
I don´t have everything you talk abaut in the device list...
But what I have is this: Generic RNDIS (PROTOTYPE- Remembber to change id Vendor)
It is with the yellow alert icon.
But what could I do to put it right?
thanks
YEEEEEEEEEEES!
Problem FIXED!
That was the problem... It was not recognized, and with alert yellow icon... Thank you very much gabiz_ro, if you´ll didn´t helped me, now I would be changing back to w2003se
Thank you very much again
ok.
glad to can help.
Problem with sync on WM 5.0
Hi, All. Anyone HELP ME pls.
When I finished upgrade my device to WM2005, my Active Sync (4.0) not working, on USB mode.
Only it's working with Bluethooth.
And I saw on PC Device Manager -> Unknown Windows Mobile Device.(Generic RNDIS (PROTOTYPE--Remember to change idVendor)
How can I fix this Problem? :?:
re-install drivers for this device
Pleun,
Hoe installeer je de drivers opnieuw. Volgens mij heb ik die niet
Groetjes
Frenske :lol:
Yes, everything what you need to do, is to click on update drivers, and everything will be fixed
Best Regards
click Update!!!
Windows cannot find this driver...
But I fixed this problem, whereas after than my device is dead. (not working radio, calendar, bluetooth etc...)
Now WM2005 is not good working on XDA II.
try deleting the device, restart pc and have windows find it again.
prototype
Ive got the same problem, where can I get the drivers to fix this???
Thanks Peter
Drivers
IIve got my MDA PRO for afew days now.
I coudnt sync with active sync 4.
I did a rom update and de beta version of active sync 4.2
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
http://t-mobile.iris-global.com/mdas.html
This PDA is like the world in my hand.
Greetings pocket pc freaks
Guys, I've waited to find a solution, it's been almost 10 months, and I wonder if I'm the only one with the problem. I can sync via USB cable, but not via Bluetooth. My setup:
Computer: Vista Ultimate 32bit running WMDC v 6.1
PPC: Dopod 181pro G3 WM6 PDAViet 4005b.
Any help appreciated. Thank you.
You must change AS config. on your PPC for BT connection
What do you mean? Under my BT in my PPC, I have ActiveSync checked. It does try to connect with WMDC, but it just never actually connects.
Has anyone gotten bluetooth sync to work under Vista and WM6? I'm starting to think there is either something missing on the WM6 PDAViet, or the Vista BT stack is missing something.
So, find the bluetooth settings in Vista. I can't help you much here since I'm using a german version.
Systemsteuerung\Hardware und Sound\Bluetooth-Geräte
(Control Panel\Hardware and Sound\Bluetooth-Devices?)
Open the panel and select COM-Ports, and add a Port for an incoming connection. Don't forget to pair the devices and tell the WMDC its allowed to use Bluetooth connections.
hope it works for you
p.s. I can't get my WM5 device to connect, its an hx4700. My Hermes works fine (WM6). Any suggestions on that maybe?
Ok thanks all, I finally got it kinda working. Kinda, cause it doesn't work all the time for some strange reason. The only thing I did to finally get it to work is, after I paired the PPC and computer up, I went to the BT icon on my desktop and clicked it open, and selected the 'HTC Phophet' icon, and under the service tab, I checked off Activesync. Then it was able to connect. It took a while to connect though, and also sometimes, it would not connect. Also, the speed is really slow, for example, to browse my PPC folders takes a very long time. I wonder if it's my upgraded radio rom. I will see if rebooting or soft resetting the PC/PPC would solve anything. Thanks again.
BT Sync with Vista Home Premium and X7501??
exe said:
Guys, I've waited to find a solution, it's been almost 10 months, and I wonder if I'm the only one with the problem. I can sync via USB cable, but not via Bluetooth. My setup:
Computer: Vista Ultimate 32bit running WMDC v 6.1
PPC: Dopod 181pro G3 WM6 PDAViet 4005b.
Any help appreciated. Thank you.
Click to expand...
Click to collapse
I could use some help with this too....
Been trying unsuccessfully to sync my Athena X7501 via BT with my lil' Kohjinsha SH6/Vista Home Premium but no go...
No problems syncing with USB Cable...
I can get both to 'see each other' but nothing happens either in Sync Center/Mobile Device Center in terms of connecting or when I click 'Sync' in ActiveSync on X7501...
Any suggestions????
ArchiMark said:
I could use some help with this too....
Been trying unsuccessfully to sync my Athena X7501 via BT with my lil' Kohjinsha SH6/Vista Home Premium but no go...
No problems syncing with USB Cable...
I can get both to 'see each other' but nothing happens either in Sync Center/Mobile Device Center in terms of connecting or when I click 'Sync' in ActiveSync on X7501...
Any suggestions????
Click to expand...
Click to collapse
if you see "serial port" instead of "active sync" during getting them to 'see each other' you may check "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort" key using regedit.
you have to change it to your bluetooth stack's incoming COM port (usually COM7). You will probably see "Bluetooth" in that key. just change it to "COM7" and restart the computer then rebind the devices.
it worked for me on my vista.
gokhanmoral said:
if you see "serial port" instead of "active sync" during getting them to 'see each other' you may check "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort" key using regedit.
you have to change it to your bluetooth stack's incoming COM port (usually COM7). You will probably see "Bluetooth" in that key. just change it to "COM7" and restart the computer then rebind the devices.
it worked for me on my vista.
Click to expand...
Click to collapse
Thanks for that input, gokhanmoral!!
Will check that out....
OK, did a search in RegEdit for
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort"
but it didn't find this....
I do see
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\" with several subfolders in it....
One folder is called 'Extended Serial' and another is 'Services'....
Can you be verify the path to the item I should edit???
Thanks!
ArchiMark said:
OK, did a search in RegEdit for
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort"
but it didn't find this....
I do see
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\" with several subfolders in it....
One folder is called 'Extended Serial' and another is 'Services'....
Can you be verify the path to the item I should edit???
Thanks!
Click to expand...
Click to collapse
it is not a path but it is a REG_SZ (string) key.
sorry, my mistake. I should have written SerialPort key under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
see the attached image.
it was "Bluetooth" before I change it.
I had no option to select COM7 in WMDC because it is marked as "used" in another registry but changing it and reinstalling the bluetooth stack is a harder way to fix. so just change it to whichever port your stack is using for incoming serial. you must have an option to check it in control panel.
gokhanmoral said:
it is not a path but it is a REG_SZ (string) key.
sorry, my mistake. I should have written SerialPort key under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
see the attached image.
it was "Bluetooth" before I change it.
I had no option to select COM7 in WMDC because it is marked as "used" in another registry but changing it and reinstalling the bluetooth stack is a harder way to fix. so just change it to whichever port your stack is using for incoming serial. you must have an option to check it in control panel.
Click to expand...
Click to collapse
Thanks for the clarification...edited that key....
Weird thing is that my X7501 and laptop can 'see each other' but still doesn't sync....when I click on 'sync' in ActiveSync on X7501 nothing happens and on laptop Mobile Device Center says 'Not Connected' and Sync Center shows the partnership with my X7501 as 'grayed out' looking.....
Not sure what you mean by 'you must have an option to check it in control panel...
Any suggestions as to what to check now???
Why Don't I See 'ActiveSync' Listed in BT Services List?
Seems that the problem I'm having getting my 7501 to sync to a PC via BT has to do with no having ActiveSync show up in the list of available services in BT partnership settings.
I just see Serial Port listed, not ActiveSync.
Could it be that I need to install ActiveSync again?
I'm using Vista on PC so I thought it uses Mobile Device Center and Sync Center which comes built-in to Vista. So didn't install ActiveSync myself...
Does ActiveSync install anything onto a mobile device like the X7501?
Thanks,
Mark
Frustrated X7501 BT Sync'r.....
GOT BT Sync Finally!
Just thought this might help someone else down the road to know what the problem turned out to be on why I couldn't BT Sync my X7501 and my laptop....
I called HTC this morning. They were actually extremely helpful!
Turns out that my laptop was using BlueSoleil BT software instead of MS BT Stack...deleted BlueSoleil and restarted and voila! MS BT Stack installed and then I could see ActiveSync service on my X7501!!!!
Who would of thought about that.....
Still troubled with bluetooth sync via WMDC/Active Sync
exe said:
Guys, I've waited to find a solution, it's been almost 10 months, and I wonder if I'm the only one with the problem. I can sync via USB cable, but not via Bluetooth. My setup:
Computer: Vista Ultimate 32bit running WMDC v 6.1
PPC: Dopod 181pro G3 WM6 PDAViet 4005b.
Any help appreciated. Thank you.
Click to expand...
Click to collapse
I have the same problem. Seems to be a fairly common one. My WM6 PPC (with Active Sync) will not sync via bluetooth to my Vista Ultimate "powered" machine with WMDC. No trouble syncing via USB. Also no trouble with bluetooth pairing of the PPC and my machine or sending files (directly) from one to the other via bluetooth. Just no syncing of Calender, Tasks, etc. over bluetooth. Kind of infuriating.
Also possibly worth noting---I had no trouble syncing same PPC to my old XP powered machine with Active Sync. Why did Microsoft insist on "improving" on something (Active Sync) that worked just fine and was straightforward to use? Vista and WMDC in particular are steps backward in my view.
Pointless griping aside, the symptoms suggest that bluetooth stacks are working, that active sync and WMDC are talking (over USB), just no syncing, suggesting something is inconsistent in the way the ports are set up, just as others have implied in this thread.
Incidentally I tried everything listed in this thread, including the Regedit modification (all of this made a lot of sense given the problem) and still get no response when I try to sync over bluetooth.
On my ppc the only options for com ports are COM2, COM4, COM6 and COM8. Does this matter?
Help!? Please.
Thanks in advance for any input.
Well, as for myself, it tured out that my problem had something to do with the pocket pc ROM I installed, as posted in the first thread. It would sync a few times at first, then never again. So, all this time (years) I've just done it with USB wire.
Now I just got done upgrading my Prophet to Ultimate v 2 ROM. And my BT active Sync is now working like normal. I knew from the description of the first paragraph there was something wrong with my flash of the new ROM or the ROM itself. Anyway, now it's working like normal. It's now time to go fix my headphone jack that is stuck in headphone mode lol. I need a new PPC!
Hi everybody
I have a Charmer with v. 000.5b WM6 Essentials ROM for Charmer. After severals hours of (unsuccessfull ) advances and after reading many tutorials I´m not able to set a Bluetooth Network connection between my Charmer and my PC.
I'm wondering if there is a special BT Driver with the Bluetooth PAN capability for the Charmer undeer WM6 needed.I was able to set a Bluetooth Activesync connection between the PDA and the PC . But i would like to connect to the internet free of the crappy AS.
My MSI Star Key BT-dongle can pair with the PDA and I see a BT-Network-shortcut in My Bluetooth Places. But doubleclick on it cause just a error message : ... not able to set a connection
If i go in WM6 to Settings - Connections - Connections i can set a new modem connection and if i choose - Select Modem : Bluetooth - it starts to search for the BT modem , finds My PC , but there are just the services : Activesync and Headset.
If i look to - NetworkCards i can find a PAN Bluettoth driver.
If you can help me i will be very glad. I tried almost any tutorial , but they are commonly for WM2003 and they are different with mine. E.g. there is no Bluetooth-Manager under WM6.
Thanks for reply
i spent also already tons of hours getting this to work and i assume its somehow related to the charmer ROM i am using. I find my pc but under Settings - Connections - Connections when i set a new modem connection and select Bluetooth it finds my PC , but there are no services available.
i am thinking of going back to wm5 and trying it again.
-bdhome
Good Day,
I too am having this issue.
I am not using a cooked rom of any type, I am using an HTC Vogue with the factory rom installed (Windows Mobile 6 Professional: CE OS 5.2.1620 Build 18125.0.4.2).
From the reading I have done it leads me to believe that that the connection has to be setup using the Bluetooth DUN setups/addons/registry tweaks discussed in numerous posts within this forum.
However, I have been unable to find instructions that have been successful on my device.
My goal with this setup is to be able to go to friends houses as I travel, insert a Bluetooth USB dongle into their PC, and QUICKLY setup a PAN to borrow their internet connection for my device. To summarize I am looking for a solution to easily to connect to the internet without having to install ActiveSync on their machines.
Any input is apreciated, Thank You!
i got it
I finally go it to work with bluetooth and dund. the distribution i am using is ubuntu. HERE its described and that is the way its working for me too.
-bdhome
O2 XDA Atom
My USB Port is broken. It was soldered but has broken again, and this time I think for good. I bought a high capacity battery (2 days only) and charger that charges the battery separately and I am forced to swap out the battery whenever it is dead.
I was able to flash successfully via SD Card to the PDAViet WM6.1 20273 ROM (removed the header, renamed nb0 and the extended image file only - but this did not fix the camera that crashes every time it is launched, the led test in diagnostics also fails).
Is there a way to flash the camera module as well from SD Card?
Now I want to sync the phone.
I have triend syncing over Infra-red and Bluetooth with no success. All the tutorials speak of syncing first via USB then the bluetooth option will work, but I can not do that.
Is there a hack/registry edit to allow the phone to sync over bluetooth without syncing over USB first?
I am looking also for a combination of apps that I can install via CAB that will allow me to transfer contacts AND install applications without ActiveSync for programmes that require ActiveSync. I prefer to get ActivSync over BT working though.
Thank you in advance for your suggestions
BT Syncing without USB
I got the BT syncing without first syncing over USB (on Vista only so far)
I followed this http://www.mydigitallife.info/2007/06/05/how-to-sync-via-bluetooth-with-wmdc-in-windows-vista/ with a couple restarts and it works!
Next to get the camera working...
syncing bt via activesync is a sinch, piece-a-piss!
Use MS bt stack
PC...go-to COM Ports (bluetooth ooptions) add incoming port and remember it, now open Activesync 'Connection Settings' and select the same Port from the drop down box.
PPC... open BT settings and pair with PC, upon hitting 'refresh' you will see Activesync animation on PC Taskbar, dont forget to add outgoing COM Port (6) in PPC.
homer285 said:
... dont forget to add outgoing COM Port (6) in PPC.
Click to expand...
Click to collapse
I realised before that the registry edit was not neccessary because WMDC 6.1 in Vista had the option to choose the BT serial port of your BT device in a drop down list. Actually I did not have to create an outgoing COM Port on the PPC to get it to work.
Hello!
I'm having some problems with the set-up of a BT connexion between my TG01 and my PC.
PC: i'm using some BT USB dongle on Win7
TG01 : i'm running the November5's FR ROM #4 (WinMo 6.5.5)
Before going any further, note that i've already successfully configured a BT connexion with a HTC Touch2. So to me, the PC conf seems OK.
Now, when i'm doing the same with my TG01, i get 2 messages telling me that the TG01 connected to COMx then disconnected to COMx.
(In fact it never stays connected more than 2-3 secs to the PC.)
On the TG01 i get the screen where i can choose to use the services hosted by the PC (ActiveSync checked) then when i exit this screen, i see the PC in the "Disconnected" menu.
When i click on "connect", i finally get an error message "connexion pbr or wrong password"
Of course the password is OK and working with my HTC Touch2.
Any ideas to solve this pbr ?
Thx
Ok nevermind, after doing this, the BT connexion only activates when i go to ActiveSync and click on "bluetooth connexion". So it's OK.
Apparently it cannot be activated manually.