Related
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also wu5262 and ahmadfarid for testing.
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Buch070 said:
My congratulation.
I have a Dutch Ameo. Can I use your *.cab to get english system?
Click to expand...
Click to collapse
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
faisal.husain said:
In Theory yes; however I don't have an Ameo ROM to test with. In theory you can uninstall if you are not happy with the install.
Click to expand...
Click to collapse
OK, I will try.
Buch070 said:
OK, I will try.
Click to expand...
Click to collapse
Please keep us posted
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
faisal.husain said:
Hi everyone I have started a new thread for English WWE ROM. If you are like me and own a Chinese Dopod U1000 device, and wish to use it in English, then I have authored a CAB. It is virtually 99% there (I think) I have tested it quite thoroughly, (there is an Uninstall if you wish to go back to Chinese.) The install is based on the Dopod WWE ROM (RUU_Athena_DOPODASIA_WWE_1.24.707.3_104_6275_1.32.00.10_108_Ship)
However as the ROM on the Taiwan device is newer, the CAB only enables the English language. Ok unfortunately you will need to do a hard reset first and then run through the extended ROM setup. Once the vendor automated builds have finished, run my CAB. The install will prompt for a reboot (in chinese, just select the option on the bottom left.) Once rebooted the unit should start up in English; now set your region and install all your apps. Please use this thread for Bug reports etc. Also credit goes to Dutty (And his set of Tools) and also Asukal, and also WU3562 and ahmadfarid for testing.
Click to expand...
Click to collapse
Finally it's out btw faisal, you keep getting my name wrong, it's wu5262 not wu3562 not a big deal really, thanks for the hard work
Sorry mate will correct, I suffer from dyslexia
Buch070 said:
It worked for me. If you don't like it, via hard reset you can always return to your original ROM.
I did as follows:
- hard reset
- reset again before loading the ext Dutch ROM
- installed the English Dopod U1000 WWE Language ROM CAB, copied before to a Microdrive
- reset
- got an error; " The file VCDaemon cannot be opened. .... reinstall or restore the file"
- install the WWE extROM, copied before to a Microdrive.
Checking how it works now.
Click to expand...
Click to collapse
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
faisal.husain said:
Ok guess is that the ameo does not ship with Cybrion Voice commander. You can fix this by navigating to Windows\startup and deleting VCDaemon shortcut....
Click to expand...
Click to collapse
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Buch070 said:
Thanks, I did it. Works OK.
Failed to install TrueVGA. I have installed OzVGA, it is working.
Click to expand...
Click to collapse
Yes I have tried to install true vga, it is a bit flakky on my dopod with or with out the english. However what i found was after soft booting a couple of times it kinda of worked.
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
victoradjei said:
Also have it working with T-Mobile Ameo Dutch with the same issues reported above. I have removed the "non existent" program shortcuts and uninstalled the voice commander application because it is not translated at all to english. Will work on the registry values to correct the positions of the tray icons vrs program links. A few programs need to be renamed and then no-one would know this used to be a Dutch ROM
Thank you guys for this wonderful job.
Click to expand...
Click to collapse
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
faisal.husain said:
@victoradjei If you send me the reg vals in a txt file I will update the installer to include these.
Click to expand...
Click to collapse
Ok will do that in a few hours time. Currently out with the kids
victoradjei said:
Ok will do that in a few hours time. Currently out with the kids
Click to expand...
Click to collapse
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
faisal.husain said:
AT your leisure, I am stuck at work at the moment, I would much rather be with my kids though!
Click to expand...
Click to collapse
Seems that most of us is not that young already
ahmadfarid said:
Seems that most of us is not that young already
Click to expand...
Click to collapse
Maybe that is the reason why we can afford such expansive toys.
TrayApplet alignment
Buch070 said:
Maybe that is the reason why we can afford such expansive toys.
Click to expand...
Click to collapse
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
victoradjei said:
No comments
Now lets see to unfinished business.
On my ex-Nederlands version, the tray applets are out of alignment. This is how I fixed it. Will find time tomorrow to "unhide" some of the icons.
Go to HKLM\SOFTWARE\HTC\TrayApplet\...........
You will see the keys (folders) named 2 to 9. Re-name them by reducing the numerical values by 1, so 2 becomes 1 3 => 2, 4 => 3 etc. until 9 renamed 8.
Currently SIM Acess Manager is not responding, and the Backlight.exe control icon is hiding. That will be sorted out later in the day by mapping the correct paths.
Click to expand...
Click to collapse
do you know how to hide the connection icon in system tray when sync? it waste me one row of space just for this icon....
Dopod has release a new U1000 rom. Just log on to their site and grab your copy.
due to popular demand (my own really, hehe) and sanction from the man himself, here is a new thread dedicated specifically to Asukal's MUI projects for the Hermes, specifically the japanese X01HT. this is a spin-off of this thread: http://forum.xda-developers.com/showthread.php?t=284765 .
below, i've made a cliff-notes of sorts, with links to the various MUI related files within the original thread. the original files remain on that thread for the time being.
MUI relevant posts:
English MUIs:
http://forum.xda-developers.com/showpost.php?p=1077551&postcount=64
http://forum.xda-developers.com/showpost.php?p=1080864&postcount=116
http://forum.xda-developers.com/showpost.php?p=1081165&postcount=119
http://forum.xda-developers.com/showpost.php?p=1100956&postcount=195 *HTC-Z*
German MUIs:
http://forum.xda-developers.com/showpost.php?p=1078882&postcount=90
Security warning:
http://forum.xda-developers.com/showpost.php?p=1078954&postcount=97
http://forum.xda-developers.com/showpost.php?p=1079158&postcount=102
Remove Japanese 'Today' Items:
http://forum.xda-developers.com/showpost.php?p=1080487&postcount=115
English Soft Keyboard:
http://forum.xda-developers.com/showpost.php?p=1081257&postcount=122
http://forum.xda-developers.com/showpost.php?p=1082056&postcount=134
Japanese to English Bubble fix:
http://forum.xda-developers.com/showpost.php?p=1082823&postcount=141
Transcriber:
http://forum.xda-developers.com/showpost.php?p=1083600&postcount=148
http://forum.xda-developers.com/showpost.php?p=1083697&postcount=152
English Today Keys Fix:
http://forum.xda-developers.com/showpost.php?p=1108577&postcount=202
Info about uninstall/hard-reset:
http://forum.xda-developers.com/showpost.php?p=1109289&postcount=204
Terminal Services Client:
http://forum.xda-developers.com/showpost.php?p=1119779&postcount=217
Softbank MMS Program English Translation:
http://forum.xda-developers.com/showpost.php?p=1172374&postcount=257
http://forum.xda-developers.com/showpost.php?p=1172472&postcount=261
English Video Call Button:
http://forum.xda-developers.com/showpost.php?p=1089229&postcount=176
i'll try to keep this post up-to-date and either transfer the files or direct links to the files to this post, but for now, continue to refer back to that thread for nitty-gritty details. hope you all find this useful!
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
PLS DONT INSTAL or USE on Xo1H <Toshiba Device>
this is not compatible for Toshiba or any other device with WM6.
Zgembo said:
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
Click to expand...
Click to collapse
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
khammo01 said:
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Click to expand...
Click to collapse
hi, of curse i say OK you to repack as your want
(but i dont know SB&MS Axis power will say OK )
i think only one cab "Welcom_Darkside_R6.zip" was included
all patches, but cabs for securities,
and you can extract canbs with CAB manager (trial version is enough)
http://www.ocpsoftware.com
Good luck!
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
well, i never did relay back my experience with the english MUI setup, but i was able to successfully install it. actually, at first, darkside6 didn't work for me immediately after installing the cab. rather, what i had to do (as one post in the previous thread tipped me off) was to find the extracted individual cabs in the temporary files folder and install them separately. after that and a soft reset, things seemed to be installed fine. most menus were changed to english (with the exception of the menus in the Softbank mail program and some drop-down menus, and shortcuts in settings).
one thing i wasn't sure about though- well, actually two. first, for the clock. i changed it so it shows a 12 hour clock instead of a 24 hour clock... but there is no AM or PM following the time? is that how it displays on native english roms? second, i've heard some people say that to get rid of the english menus and revert back to japanese, you have to do a hard reset. does this mean that it's safe to uninstall the programs listed in the installed programs list related to the MUI? i'm not a fan of hardresetting, and would like to avoid screwing up my quite functional setup if it's not necessary. but if its just taking up unnecessary space...
tora201 said:
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Click to expand...
Click to collapse
i tried this in WM6 (Hermes) and worked.
try to install enable_rapi.can before this,
and will work(some MUI doesnt in this for WM6, still keep english them)
Asukaly yours!
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
possiblity, 1st deleat Paring device when yors were English Lacation,
and try to sync after Japanese Location(not sure)
also i hard similar bug, and he could fix that with registry tweak.
(no exactly information what registry was tweaked)
Hello Asukal! I come to you again for help!
There are two things that I still have problems with while making English ROM Japanese friendly:
1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
2º)[less important] Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)
Thanks!
PD: After read this thread, I have two small questions (really less important; just curious):
a)LetsJapanNo6.zip: New CAB for make Softbank Hermes from JP to English without flash I suppose, no?
a1)Want does exactly do the Treo version?
b)You translate Softbank mail app to English, but only works in original ROMs because of certificates?
And the last one ... Any advance in MMS after MMS Lite? Last times I only checked WM6 Forum, and I think I lose many news form this forum.
Really thanks for all!!
Asukal said:
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
Click to expand...
Click to collapse
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
:O I had installed Letsjapan 5 and happens the same, and I couldn't connect to msn, with the same error you said.
so I tried, unistall it, and works. Then I just installed Letsjapan6 , and still can connect to windows live MSN
I didn't realize that could be the problem Thanks.
And thanks Asukal for LetsJapan x
sesaru said:
I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
Click to expand...
Click to collapse
No idea about this?
sesaru said:
No idea about this?
Click to expand...
Click to collapse
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
mexec said:
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
Click to expand...
Click to collapse
sorry, i found this, and tested on my device.
not worked,
have to remake this,
PLS wait, but i am so busy this season, can not say when...
Asukal said:
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
Click to expand...
Click to collapse
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Asukal said:
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Click to expand...
Click to collapse
Asukal, I really love you!! I was asking for this many many times, and nobody know it!! (^-^)
There is more thing to make my WM6 perfect, and also one question that maybe you can help me
-I tries many times to make Pockect IE to work with Yahoo! Keitai of softbank but not way. Maybe you know how to do it.
-For MMS, I have MMSLite. I hace flat rate of softbank (1man yen). I'm not sure if MMS Lite use standar Softbank connect, or use any that mabe will charge more money to me (more than that 10.000 yen guari)
Thanks a lot!!!!!!!!!!
Sesaru
Hey.
So i downloaded this and installed on touch X.
But it wont work. I do not get any Scandinavian keyboard :/
Anyone got this to work successfully? If so please tell me how
Hargibi
I'm just adding my voice. I hope someone can help us with this.
Thanks mate..
Gullum any change you got any idea how to get this to work ?
I have the same problem, even tried to edit the registry (a bit too much), so now it doesn't even work in english ;-)
I will post how I solved it to get swedish to work later today, when I get to my PC.
Copy the attached files, except the .reg file to the windows folder.
Import the .reg file.
Change the registry key HKLM/Software/HTC/ezsip/LibraryCount to 16 (dec)
Soft-reset to be on the safe side and then you can choose Swedish language in the Touch Keyboard settings.
For other languages you have to figure out what files to copy and change the registry settings.
Good luck to you!
Great! Thank you!
Does anyone have the norwegian files?
DarkMannen said:
Great! Thank you!
Does anyone have the norwegian files?
Click to expand...
Click to collapse
the Norwegian files are inside the scandinavian cab on gullim.4shared.com
Yes, you're right.
So there is probably only a reg setting left to get this working. Norwegian is currently not showing in the list of available languages in the touch keyboard settings.
can you help me with the portuguese language?!?!?!
Hei. The files in Gollums scandinavianX.cab is different than the swedishfiles.zip. How du I take out the norwegian files and the reg.file? Can anyone do that and make a zip of it like the Swedish files? We norwegians would thank you!
Take a look
Hey, I just posted a guide for Norwegian language here:
http://forum.xda-developers.com/showthread.php?t=350215
"Burde virke bra"
I can't seem to get this to work. For some reason, norwegian is not a choice in the languages dropdown menu. I have modified the LibraryCount to 16 (dec), which increased the amount of available languages, but norwegian is not one of them.
Have anyone got this to work?
Re
1.
Some keypad installers leaves a string called "AvailableLanguages"(Sorry if I misspell Available).
Where you can check if the language code for Norway is in fact there.
2.
Maybe you got more languages than 16, try to increase the number.
3.
But it sounds more like you need to get another cab installer for the keypad and try again.
Hope it helps!
I'm just uploading the beta of the WWE version
It will be in ENG, ESN, FRA, GER, ITA, NLD, PTG, DAN, NOR, PLK and RUS
Please remember that it's a beta.
Anyway please test it and see if something is not working.
ThrottleLauncer is not in this version because the version I'm using is still in development (So it like a clean rom but not totaly clean)
what you will not find in the rom and will not be added to the rom is
Cube
Audio Manager
EndKey
Actionscreen
HTC Home
the Above are replaced by ThrottleLauncher in final release
MP3 trimmer
HTC Audioboost
MMS
MS Live
MSN.
there are cabs for these if needed
SO whats in it then
Touch Dual dialer (Diamond skined)
Larg Startmenu
Large Titlebar
Random access
Diamond Kayboard(English only in beta, the languages versions will have english + the country the rom is set to default)
Camera Album (Only English menus)
YouTube player (not diamond one)
ThumbCal
Paint
Java
Office( Excell and Work)
and the usual MS software
the rom is also UC
Fixed the camera and Hardware keyboard at least for 16 Key version (My girlfriends Nike has 16 keys)
Mediafire download link: Nike Diamond I Beta2 rom
nice looking rom. only problem i can see immediatly is the hardware keyboard is only giving numbers no letters. will keep testing along with throttle .91
Looks nice. The problem I also see is with the hardware keyboard 20 keys version. The 16 keys version will work with the modified cabs I made of Gullum's diamond keyboard. I haven't found a solution for the 20 keys version yet, but let's hope Gullum did.
i tried the orginal version of these cabs on a different rom but was only getting numbers then will try them again when i get chance. UK orange 16 key version
wmn79 said:
Looks nice. The problem I also see is with the hardware keyboard 20 keys version. The 16 keys version will work with the modified cabs I made of Gullum's diamond keyboard. I haven't found a solution for the 20 keys version yet, but let's hope Gullum did.
Click to expand...
Click to collapse
Is it the dahpd.kdb that makes the hardware keyboard work? for danish in this case
I'm kind of lost because I'm using my girlfriends dual for making this rom for a limeted time period
yeah that is one thing the other is that I left some registry keys out of the diamond keys cab. You can check the edited cabs in this post or in my 4shared folder.
wmn79 said:
yeah that is one thing the other is that I left some registry keys out of the diamond keys cab. You can check the edited cabs in this post or in my 4shared folder.
Click to expand...
Click to collapse
Thanks I'll look into it right away
gullum said:
I'm just uploading the beta of the WWE version
It will be in ENG, ESN, FRA, GER, ITA, NLD, PTG, DAN and NOR
Please remember that it's a beta.
Anyway please test it and see if something is not working.
ThrottleLauncer is not in this version because the version I'm using is still in development (So it like a clean rom but not totaly clean)
what you will not find in the rom and will not be added to the rom is
Cube
Audio Manager
EndKey
Actionscreen
HTC Home
the Above are replaced by ThrottleLauncher in final release
MP3 trimmer
HTC Audioboost
MMS
MS Live
MSN.
there are cabs for these if needed
SO whats in it then
Touch Dual dialer (Diamond skined)
Larg Startmenu
Large Titlebar
Random access
Diamond Kayboard(English only in beta, the languages versions will have english + the country the rom is set to default)
Camera Album (Only English menus)
YouTube player (not diamond one)
ThumbCal
Paint
Java
Office( Excell and Work)
and the usual MS software
the rom is also UC
Mediafire download link: Nike Diamond I Beta rom
Click to expand...
Click to collapse
Good work!!!!!
One more to cook!!!!
Hi Gullum thanx for your work.
I just installed your rom,here are some quick findings before I go to sleep:
- I miss the connection setup wizard. Running it from the settings => connections menu gives an error. Running it from the windows dir gives me the same error.
With other roms it did initialize it after first start up. So now I don't have an internet connection so I can't figure out if the syncing and everything with internet works.
- UC is working great. It did it right after the normal setup without having to restart. Which it has when doing it manually.
- Hardware keypad doesn't work maybe you want to have a look at the edited cabs I made of your version and put these in. See my previous post
- There is no battery icon in the top bar only when you click on the time you see some status. It also isn't in the balloon thingy off the top bar.
Thats it for now. I will install another rom because I can't use my phone really without internet (calendar and contacts on exchange server) and I'm to lazy to set the internet connection up by hand
Thanx for the hard work and I'm looking forward to another test version.
wmn79 said:
Hi Gullum thanx for your work.
I just installed your rom,here are some quick findings before I go to sleep:
- I miss the connection setup wizard. Running it from the settings => connections menu gives an error. Running it from the windows dir gives me the same error.
With other roms it did initialize it after first start up. So now I don't have an internet connection so I can't figure out if the syncing and everything with internet works.
- UC is working great. It did it right after the normal setup without having to restart. Which it has when doing it manually.
- Hardware keypad doesn't work maybe you want to have a look at the edited cabs I made of your version and put these in. See my previous post
- There is no battery icon in the top bar only when you click on the time you see some status. It also isn't in the balloon thingy off the top bar.
Thats it for now. I will install another rom because I can't use my phone really without internet (calendar and contacts on exchange server) and I'm to lazy to set the internet connection up by hand
Thanx for the hard work and I'm looking forward to another test version.
Click to expand...
Click to collapse
Hi wmn79
could you have a look at the newest OEM I uploaded
http://www.mediafire.com/?12xq5towzbo
I've tried to look at your but can't see much differance except the keyboard files.. Am I missing something?
hi there - i loved your prophet roms !
good to see you on board and may your girlfried keep her touch dual for a long long time ;-)
cheers
gullum said:
I'm just uploading the beta of the WWE version
It will be in ENG, ESN, FRA, GER, ITA, NLD, PTG, DAN and NOR
Click to expand...
Click to collapse
Gullum
what files do you need to add polish version? there is polish rom for dual available already with WM6.0 so maybe there is a way to add some files from it?
Jut in case - link for polish rom
http://rapidshare.com/files/104481569/RUU_Nike_ORANGE_PL.rar.html
gullum said:
Hi wmn79
could you have a look at the newest OEM I uploaded
http://www.mediafire.com/?12xq5towzbo
I've tried to look at your but can't see much differance except the keyboard files.. Am I missing something?
Click to expand...
Click to collapse
I've have changed the RGU file so you can compare it with the original. What I basically did is:
- remove the Diamond keypad clsid registry keys (it seems like the Touch Keypad is somehow connected to the hardware keypad)
- changed the IME kdbfiles reg keys
- replaced the both the eT9.Nike.20Keys.0409.kmap.txt and eT9.Nike.20Keys.kmap.txt file with an empty file.
This works for the 16 keys version but the 20 keys version is not happy with replacing the txt files for an empty file. You could try the steps above without replacing the txt files or expirimenting a bit with the text files, but when making the cab it didn't work for me. Good luck.
trib said:
Gullum
what files do you need to add polish version? there is polish rom for dual available already with WM6.0 so maybe there is a way to add some files from it?
Jut in case - link for polish rom
http://rapidshare.com/files/104481569/RUU_Nike_ORANGE_PL.rar.html
Click to expand...
Click to collapse
The files for a Polish version I already added in my edited version of the Diamond keyboard so if you want to add the files you can find them in my post otherwise you can also have a look at my normal XT9 cabs for Dual.
wmn79 said:
The files for a Polish version I already added in my edited version of the Diamond keyboard so if you want to add the files you can find them in my post otherwise you can also have a look at my normal XT9 cabs for Dual.
Click to expand...
Click to collapse
ok, I missunderstand one thing and thought that this ROM is multilanguage so it is possible to have polish version of Rom not only XT9. shame on me
Bugs I've found:
1. start > settings > there is "Keypad QuickTasks" name visible without icon and I can't click it
2. start > settings > Network Config Wizard - there is an icon but without a name and when i clik on it an error pops up.
3. Dimond keyboard - hardware keypad can write only numbers (this bug is known already), and the list of available XT9 languages is long, so if I choose polish I can't write anything (only languages gullum includes works)
trib said:
ok, I missunderstand one thing and thought that this ROM is multilanguage so it is possible to have polish version of Rom not only XT9. shame on me
Bugs I've found:
1. start > settings > there is "Keypad QuickTasks" name visible without icon and I can't click it
2. start > settings > Network Config Wizard - there is an icon but without a name and when i clik on it an error pops up.
3. Dimond keyboard - hardware keypad can write only numbers (this bug is known already), and the list of available XT9 languages is long, so if I choose polish I can't write anything (only languages gullum includes works)
Click to expand...
Click to collapse
For Polish version I already have the Kaiser Polish WM6.1 but the problem I'm having is the initflashfiles.dat only has numbers for the links and folder I will try to add more language suport to these roms but it needs more work to port then the othere languages... but my coffie roms for Prophet also had Polish and Russian .
It's only the Kayboard that has suport for polish not a full rom yet but I am working on adding more versions. Good new are that when I've done it for one device it can be used for all devices I will suport... meaning I only have to do it once
I've have changed the RGU file so you can compare it with the original. What I basically did is:
- remove the Diamond keypad clsid registry keys (it seems like the Touch Keypad is somehow connected to the hardware keypad)
- changed the IME kdbfiles reg keys
- replaced the both the eT9.Nike.20Keys.0409.kmap.txt and eT9.Nike.20Keys.kmap.txt file with an empty file.
This works for the 16 keys version but the 20 keys version is not happy with replacing the txt files for an empty file. You could try the steps above without replacing the txt files or expirimenting a bit with the text files, but when making the cab it didn't work for me. Good luck.
Click to expand...
Click to collapse
Thanks for the info I'm shure this will help me in fixing the Hardware keyboard problem.
I tried putting the original kayboard back in and I still only get numbers from Keyboard so I must be misssing some reg somewhere I will hunt it down
Nice ROM, great work, but Camera dosen´t work for me.
- unable to capture frame data from camera.
MCS
mcs said:
Nice ROM, great work, but Camera dosen´t work for me.
- unable to capture frame data from camera.
MCS
Click to expand...
Click to collapse
That's my fault didn't try taking a pic before uploading I tried using the same cam as I used for Kaiser that has 3Mpx but it's fixed now
Is it fixed ?
I can´t download the file.
-Invalid Quickkey. This error has been forwarded to MediaFire's development team. The quickkey you provided for file download was invalid. This is usually caused because the file is no longer stored on Mediafire. This occurs when the file is removed by the originating user or Mediafire.
MCS
I just tested and link still works for me
I found it annoying that keys on the qwertz-keyboard on long press didn't give out the secondary symbol anymore, in other words: in order to show the € sign, you first have to press FN. I changed the eT9.Rose.0407.kmap.txt so it will bring up the numbers/secondary symbols on long press. Also, there were no umlauts at all. These will now appear by pressing FN and the corresponding letter (FN + a --> ä, etc.)
Just copy the attached file to your device, and then using TotalCommander, move it into the windows folder.
Thanks for the tip. I didn't know that was so easily possible. I altered my eT9.Rose.0407.WWE.txt to be able to type Slovak national character on long press. Works flawlessly.
A keyboard layout is any specific mechanical, visual, or functional arrangement of the keys, legends, or key–meaning associations (respectively) of a computer, typewriter, or other typographic keyboard.
After a little tweaking it also worked for Norwegian ÆØÅ characters! Ahh! Lovely to finally have the Rose working with WM 6.5 ROM and Norwegian characters!!!
How can i put this file into the windows folder??
it says always that the file is in use and cannot be replaced
thanks in advance
loco09 said:
How can i put this file into the windows folder??
it says always that the file is in use and cannot be replaced
thanks in advance
Click to expand...
Click to collapse
It says quite clearly in the original post:
Just copy the attached file to your device, and then using TotalCommander, move it into the windows folder.
Click to expand...
Click to collapse
.-ombre-.
how can I change the keymap of the kaypad(not the QWERTZ).
I am using greek language and i would like to modify it,remove some symbols,change the position of some letters...
Thank you
checkin this out,thanks a lot