I found some possible ways to get a animated startup screen on Artemis, Hermes, Trinity and Elf, but what is with them for our Prophet?
Can anybody get them working? I tried some but without success!
Try these links for more information:
http://forum.xda-developers.com/showthread.php?t=321638
http://forum.xda-developers.com/showthread.php?t=321503
yes it is possible, but I didn't worked it out fully.
it worked when I flashed prophet with a cooked rom that used initial leaked dump(sys and oem) of Touch.
device booted till startup animation and stops at welcomehead.
It prove that its possible on prophet also. However floating cab/oem-packs never worked.
evo 8 has a start up animation
it works , but I don't use it because it just make the reboot takes longer.
hma4 > Where is the OEM Pack how is working you use ?
Good night
Yeah, i want the OEM-/SYS-Package for this, too!
yeah
i'm interested too!!! can someone upload some progz or animations or an how-to make it? Thank you
KEN
I will try to include that functionnality to my BootScreen changer tool (see my signature).
An update is coming within 2 days max.
I would like to have that "shiny" on my phone aswell
I'm sure the hardcore rom cooks don't use it... but it would be a nice addition...
see if you tell us how to do it hma4 or gullum, then the people have to wait extra seconds on boot time but add some "shiny stuff" to their PDA phones.
I've extracted the needed files and one registry path (with some sub-entries) and integrated them into my german Prophet Touch IX, flashed it and nothing apeared!
It seems that there must be more than I've found!
i know i'm not a genious in this stuff, but isn't there like a DLL needed to actually get those animations going... isn't there a little secret file you need to get it going...
i cant find out how to make it work... can someone tell me how to do such thing? thank you so much
man I would love to have an animated today screen... that would be awesome.
Hey,
Yes, you can have an animated Today screen for your PPC. There's one by Gigabyte and it's really awesome! Search for it and I'm sure that you'll find it.
kiwi992.
We're searching for a possible way to integrate an animated bootscreen and not an animated today screen!
EVO8EN has it... so i'd guess rip it out of that rom or just plainly ask the cook...
any update on this?
ok i seem to have found all the files... you need a couple more files than only the one file in the cab...
so it seems...
StartupAnimationEngine.dll (the engine to have the startup animation)
(i'm figuring out if this DLL needs to be added to the drivers list inside the registry)
PLAYSND.dll (seems to have a function to add startup sounds)
Htc_Lib.dll (used instead or aside of HTCUtil.dll i'm not sure...)
added this one to registry at drivers... it doesn't hurt my prophet... so i'm leaving it there...
Engine.Dll (i do not have the foggiest idea what the **** this file is for...)
these files are pointed out in some artemis startup animation thread:
http://forum.xda-developers.com/showthread.php?t=311357&page=13&p=1317509
the registry keys to activate it should be:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StartupAnimation]
"GIFFile"="\\windows\\animated.gif"
"Enabled"=dword:00000001
"WAVFile"="\\windows\\startup.wav"
"Volumn"=dword:0x50
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StartupAnimation]
"GIFFile"="\\windows\\animated.gif"
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HtcInit]
"Prefix"="HTC"
"Dll"="Htc_Lib.dll"
"Order"=dword:0
!!! verry important.... !!! i've added a HTCinit2 key so i didn't DELETE the HTCUtil.dll driver initialisation... just because i'm scared i'll f**kup my prophet...
use these settings and files at own risk...!!
(nothing happened when i used these files but you never know...)
HUZAAAH it works now...
f**k me!!! it works...!!! just edited registry... with the setting i really didn't want (the scared to make my prophet fubar part...)
it was the files i mentioned... it was the registry i mentioned...
so:
these files should be in your windows directory (on your pda that is... )
StartupAnimationEngine.dll
PLAYSND.dll
Htc_Lib.dll
HTCUtil.dll
Engine.Dll
regedit these settings:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StartupAnimation]
"GIFFile"="\\windows\\animated.gif"
"Enabled"=dword:00000001
"WAVFile"="\\windows\\startup.wav"
"Volumn"=dword:0x50
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StartupAnimation]
"GIFFile"="\\windows\\animated.gif"
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HtcInit]
"Prefix"="HTC"
"Dll"="Htc_Lib.dll"
"Order"=dword:0
however i did make another regedit but i don't know weither it's needed or not...
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StartupAnimationEngine]
"Dll"="StartupAnimationEngine.dll"
in any way these are my settings and they work...
FOUND A PROBLEM!! if you have a WAV file to play at startup my sounds stop working... no rings, no mp3, nothing!!
Related
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
For those who want to change the appearence of the HTC Home Plugin check this thread:
http://forum.xda-developers.com/showthread.php?t=319308
I've tryed it and it seem to be working on Prophet also.
Interresting, but I have WM6 and my HTC Home plugin is actually in rom ^^
Ogre93 said:
Interresting, but I have WM6 and my HTC Home plugin is actually in rom ^^
Click to expand...
Click to collapse
Me too. And it works!!
I tried it, actually, this is working until the soft restart the plugin. After that the prophet is going VERY slow (+15s to open windows directory, instead of 3s usually).
Ogre93 said:
I tried it, actually, this is working until the soft restart the plugin. After that the prophet is going VERY slow (+15s to open windows directory, instead of 3s usually).
Click to expand...
Click to collapse
I've had that problem also. It got very slow. I tought it was something else I might have done, so I hard Reseted my device and never used the program since(because I don't use the HTC Home plugin - I just wanted to try the program).
yeah guys it make my prophet very slow
any solution can we do it ?
Hi there,
Thanks for this great app! But anyone has problems with running HTC Audio Manager in WM5? It doesn't work on my Prophet. It gives me the known 'trusted certificate' message when I try to run it. Please help
My prophet also got VERY slow! I recognized that the home plugin customizer placed about 200-300 files in windows/ (HH_....)
i think this is the reason for slow performance!
I can't understand why some programs place their files in /windows instead of this the files coulb be saved in Windows/HH_home_plugin .... or something like that.
If someone is able to do that,pleaso DO IT!!!
I considered to delete the files in /windows but i dont wanted to delete any of the "origin" home plugin files
sorry for my horrible english
Hey,
I'm the author of the customizer and I'd like to hammer out the slowness issue. The only thing I can think of is that the files are installed to a different location on your prophet (from ROM install) than the customizer is checking for. Could someone please let me know when the files are found on the device with the default plugin? I would like to fix this for the next version which is just about done.
Thanks,
emunutz
Whoops, DP
emunutz said:
Hey,
I'm the author of the customizer and I'd like to hammer out the slowness issue. The only thing I can think of is that the files are installed to a different location on your device (from ROM install) than the customizer is checking for. Could someone please let me know where the files are found (exact path) on the device with the default plugin? I would like to fix this for the next version which is just about done.
Thanks,
emunutz
Click to expand...
Click to collapse
Hi I'm one of the rom cockers here anyway my roms and also PDAVIET roms have the files located in the windows folder...
emunutz said:
Hey,
I'm the author of the customizer and I'd like to hammer out the slowness issue. The only thing I can think of is that the files are installed to a different location on your device (from ROM install) than the customizer is checking for. Could someone please let me know where the files are found (exact path) on the device with the default plugin? I would like to fix this for the next version which is just about done.
Thanks,
emunutz
Click to expand...
Click to collapse
From what i've been able to find out, the slow down happens because when the program applies a skin, or just a part of it(it doesn't really matter if it's all or just a part), the files in windows folder are replaced, but as they are ROM files, the replacing of the files doesn't really overwrite them, and being so, the list of files becomes longer and longer, and that causes the PPC to slow down.
So, in my opinion, the solution starts by not having the plugin included in the rom(correct me if i'm saying nonsenses), and maybe putting it in the extrom, and making the installation go to a differente folder.
FInixNOver said:
So, in my opinion, the solution starts by not having the plugin included in the rom(correct me if i'm saying nonsenses), and maybe putting it in the extrom, and making the installation go to a differente folder.
Click to expand...
Click to collapse
I agree, a different folder would completely resolve this issue. For instance, schen's cab installs almost everything (except HTC HDlg.exe,HTC HDlg.0409.mui, and HH_0409_WeatherCities.xml) to \HTCHome. How easy/hard would it be for the cookers to change that and is it worth changing to get better "compatiblity" with the customizer?
emunutz said:
I agree, a different folder would completely resolve this issue. For instance, schen's cab installs almost everything (except HTC HDlg.exe,HTC HDlg.0409.mui, and HH_0409_WeatherCities.xml) to \HTCHome. How easy/hard would it be for the cookers to change that and is it worth changing to get better "compatiblity" with the customizer?
Click to expand...
Click to collapse
hi again
what I tryed to do in my V4 & 5 of prophet touch roms was to move the images to HTC folder with intflashfile.txt like this
Directory("\HTC\Home"):-File("HH_BEZEL_fill.png","\Windows\HH_BEZEL_fill.png")
but that only made a copy of the original file so I had 2 copies of the same image...
1 in HTC folder and 1 in windows folder, but what I wanted to do is move the files to HTC folder
so if anyone knows how I could do it properly I'd be verry happy,
because it would make the rom faster and would also make this customiser program even more affective.
gullum said:
hi again
what I tryed to do in my V4 & 5 of prophet touch roms was to move the images to HTC folder with intflashfile.txt like this
Directory("\HTC\Home"):-File("HH_BEZEL_fill.png","\Windows\HH_BEZEL_fill.png")
but that only made a copy of the original file so I had 2 copies of the same image...
1 in HTC folder and 1 in windows folder, but what I wanted to do is move the files to HTC folder
so if anyone knows how I could do it properly I'd be verry happy,
because it would make the rom faster and would also make this customiser program even more affective.
Click to expand...
Click to collapse
I just saw this in the Hermes Mobile 6 forum. I believe this post has the file you may need to do this.
http://forum.xda-developers.com/showpost.php?p=1442517&postcount=9
hello guys
i try the program again and it dosent make any slow to the prophet
but this time when i install the icons and clock i am not chosee to save the theme not like the last try
i think the problem is saving the theme in program options
so never save the theme ........... never
that's work with me
belivie it or not ....
mostafa0007 said:
hello guys
i try the program again and it dosent make any slow to the prophet
but this time when i install the icons and clock i am not chosee to save the theme not like the last try
i think the problem is saving the theme in program options
so never save the theme ........... never
that's work with me
belivie it or not ....
Click to expand...
Click to collapse
Saving themes should not affect your device. When you save a custom theme, all the customizer does is save the name you gave it in an "ini" file in the customizer's FILES directory. Now applying a theme is a different story as that's when it's copying files to your device.
Could you or someone else test this out a little more? I'd like to release v0.8 today but if this is indeed the issue, I'd like to fix it before release.
first i am mistake about saving theme ..... i was wanted to say make backup not saving theme
emunutz said:
Saving themes should not affect your device. When you save a custom theme, all the customizer does is save the name you gave it in an "ini" file in the customizer's FILES directory. Now applying a theme is a different story as that's when it's copying files to your device.
.
Click to expand...
Click to collapse
that what i believe in ........
emunutz said:
Could you or someone else test this out a little more? I'd like to release v0.8 today but if this is indeed the issue, I'd like to fix it before release.
Click to expand...
Click to collapse
i already try to make bakup again and prophet is work fine
no slow ! after doing what i have do it the last time by the program !
now i can't recognize to the problem bcuz it's no more
i am using now pdav 6 and no slow
the slowing with me happened with gullum's rom 6
but idon't think this the point
anyway i will make some destructions and see the results
help pls
when i go to change themes there aren't any. It's blank! When I go to icons, it is blank also. what should I do?
Is there a "manual" way to change font type in the clock display?
It would be great to be able to do that without using that .cab
THANKS!
OK i edit myself. Numbers are png files which i guess can be edited. COULD someone post number samples so we could choose the appearance? It would be great. THANKS!
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
I have tried making some OEMs myself from Cabs (with some success).
I was wondering 2 things.
Does anyone know of anywhere that OEMs are downloadable. I am looking for programs like:
S2P
S2V
S2U2
TouchFlo
iContact
LiveSearch
Opera Mini
Mortscript
Weather Panel
Today Agenda
UL
I am thinking that my problems stem from the final stage
"The next window that appears, known as the 'initflashfiles tab' is for executable and help file links. Select which files you want your links and the folders to place them. Select and apply for each link and when finished, click done to proceed."
Can anyone explain this a little clearer? Do I actually have to do anything in this screen? I would love to be able to cook my own ROMS to make it easier to get my phone where I want it after a hard reset.
Also does anyone know if you can alter the OEMs and cook them. For example, could I replace the default themes in Weather Panel with the Diamond ones so that I do not have to copy from the card when resetting?
Sorry for all the questions but I recently did my first flash and now have the bug and it takes me ages to install everything every time i do it.
I get all mines from ppcgeeks some work with dcd some don't.
I use the UC option in the kitchen and use the OEMizer to create the info for it to install the CABs you want. They must be on your SD Card but it works great. It will also copy files from the SD Card to Main Memory as well. It is supposed to be able to make registry changes to but I never got that to work with just editing the provisional.xml file. OEMizer is great for several settings any ways and you will have your own personal OEM to put in the kitchen to bake.
PPC GEEKS oem.rar for the easy out way or if you are into learnning any of it oemizer works pretty good to.
I have use some on this post.
He does take request.
http://forum.ppcgeeks.com/showthread.php?t=25696
Wow, thanks for that last one, I will post some of my requests on there as well. Can't wait to get cooking!
Here are some I have made......
Update 2009/04/12
Here is a working cab to enable "Rogers/Fido Call Display" by Captain_Throwback. This cab has been tested and proven to work with many ROMs. I've personally tested it on "Energy" and "RoMEOs" ROMs and it work like a miracle. A big bravo to you, Captain
----------------------------------------------------------------------------
The QUICK/EASY method on Post #14 only work for ELITE RC2 (cab file included)
----------ROMs that work for Raphael----------
NATF's v4
Lantis OS 21009 AKU 1.5.0 v3.00
RRE Canadian 4.1
PROven ROM 1.12
Elite RC3 will include this option
For Da_G ROM and Shipped ROM, you simply have to replace the dll file
----------This is how you do it, for chefs----------
After 33 hours straight non-sleep, and plenty of pm to Da_G and NATF, I can proudly say that we've found the perfect answer for this problem
and finally we can put an end to this question "how to make Rogers/Fido Call display to work?"
I've tested this and believe that this solutions may work for any ROM. So far I've tested with 2 of NATF's ROMs, but I need someone to test
this on Kaiser and other device as well. You don't need to used a Shipped ROM, but you can apply these step to any of your favorite ROM.
2 simple steps in summary:
First you need to cook rilphone.dll file into your ROM in the folder /OEM/OEMDrivers/
Second, you need to change the file that setup all the registry key to your device when you flash
For Fuze (may be different for Kaiser), this is the file: /OEM/OEMDrivers/de3f3189-9f71-4162-9f26-39393dcc8c94.rgu
(I attach the original file from Da_G's clean ROM)You can either just replace this file or simply go in the file and Make
sure that all lines related to these regs are the same as the one I've posted here (took from Da_G's ROM)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
POST #12 includes all registry lines that I've modified
The Files are attached.
----------How to cook rilphone.dll into your favorite ROM, from Da_G's words----------
Code:
[B][COLOR="Indigo"]-=01=-[/COLOR][/B] Download a ROM Kitchen for your device, for Fuze is RaphaelKitchen
[B][COLOR="Indigo"]-=02=-[/COLOR][/B] Extract Kitchen
[B][COLOR="Indigo"]-=03=-[/COLOR][/B] Copy your favorite ROM *.nbh file into \BaseROM\ folder (from extracted Kitchen)
[B][COLOR="Indigo"]-=04=-[/COLOR][/B] Rename your *.nbh file to RUU_Signed.nbh
[B][COLOR="Indigo"]-=05=-[/COLOR][/B] Launch "RaphaelKitchen.CMD" from *Kitchen\ folder
[B][COLOR="Indigo"]-=06=-[/COLOR][/B] choose "e" for extract, then "a" for from BaseROM "RUU_Signed.nbh
(if everything work so far, your dos should be running on it own now)
[B][COLOR="Indigo"]-=07=-[/COLOR][/B] When it's done, check if you have these three main Folders
+/OEM
+/SYS
+/ROM
(make sure they are not empty or only have 1 sub folder. if this is the case,
then your favorite ROM is protected... ask the cook nicely to share with you
those 3 folders)
[B][COLOR="Indigo"]-=08=-[/COLOR][/B] replace these 3 files into /OEM/OEMDrivers/
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=141542&d=1230689478"]+"rilphone.dll[/URL]",
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=141541&d=1230689478"]+"de3f3189-9f71-4162-9f26-39393dcc8c94.rgu"
+"de3f3189-9f71-4162-9f26-39393dcc8c94.dsm"[/URL]
[COLOR="Red"][B][SIZE="2"]It's recommended that you modify the *.rgu file instead of replacing it for a moded ROM,
because of all the tweaks chefs have added.)
For list of registries that I've changed in the *.rgu file, [URL="http://forum.xda-developers.com/showpost.php?p=3106249&postcount=12"]READ POST #12[/URL][/SIZE][/B][/COLOR]
[B][COLOR="Indigo"]-=09=-[/COLOR][/B] Launch "RaphaelKitchen.CMD" from *Kitchen\ folder again
[B][COLOR="Indigo"]-=10=-[/COLOR][/B] chose "cf" for cook and flash a ROM, then "b" for "if you want to use the
new BuildOS+Package..."
[B][COLOR="Indigo"]-=11=-[/COLOR][/B] Ervius Package _tool+BuildOS windows will launch, choose "BuilOS" tab
[B][COLOR="Indigo"]-=12=-[/COLOR][/B] click on "Load ROM", now choose your Kitchen/ Folder where you have
OEM/ROM/SYS folder, then click ok
[B][COLOR="Indigo"]-=13=-[/COLOR][/B] Click on RUN, once it finished loading the ROM. When you see the
word "Done" Close Ervius by clicking on the "X" button
(your DOS will run again, and ask you to press any key to start... Press
the "any key" :p )
[B][COLOR="Indigo"]-=14=-[/COLOR][/B] While it's running, it will open a tables with a bunch of numbers that
you don't understand
(it's checking the memory)... just close it by clicking on the "x" button.
(your Dos will run again, till you get your favorite Flash Window come up...
from here, you're on your own)
Don't forget to HardSPL your device before FLashing your device.
Let us know if this method work for you.
I'm also inviting all the Chefs to join the fun and provide us a Canadian version.
----------Credits----------
This tweak isn't perfect, but took me a while to make Rogers/Fido Display work. However I wouldn't be able to get this far without the helps of Da_G, NATF, trueg and a bunch of other people that I've bugged.
At least give some credits to those who have spent so much time to make this finally happened. Like Da_G said, a donation isn't required, but always appreciated.
Donate
Also, thank nitroblu and y2whisper and other Canadian users who has tested and post their results
There were many bounty offering for this discovery, but none of them keep their words... so disappointed... anyway
----------Found issues----------
1- Does not work while MSVC phone notification is activate.
2- May have issues with QuickGPS (not yet confirmed)
3- It froze my device every-time I run it with spb Wireless (need confirmation)
Can any Mod Change the topic of this one to "[Tut]First step to Canadian ROM, Rogers/Fido Display on your Fuze"
Click edit on the first post, then click advanced edit, you can change the topic from there
Da_G said:
Click edit on the first post, then click advanced edit, you can change the topic from there
Click to expand...
Click to collapse
Thank you... Now, I'll leave the Rom Cooking to the real Chef... I'm going to bed
so happy now
Hi pandaboyy,
Thanks for doing all the hard work. I am in Toronto and use Rogers and ever since I got my Tilt2 earlier this year I have been missing the name display. I just got my Fuze from the states today and installed NATF v3.2 rom. I look forward to having name display working again.
Just one question: any way to put this in a cab or build it into NAFT roms?
Thanks again.
Rob.
talonrob said:
Hi pandaboyy,
Thanks for doing all the hard work. I am in Toronto and use Rogers and ever since I got my Tilt2 earlier this year I have been missing the name display. I just got my Fuze from the states today and installed NATF v3.2 rom. I look forward to having name display working again.
Just one question: any way to put this in a cab or build it into NAFT roms?
Thanks again.
Rob.
Click to expand...
Click to collapse
Hey Rob,
I was about going to TO today to celebrate New Year Eve, but since I didn't sleep I got lazy out and drop the plan (true story). I don't think a cab would do the job. Da_G did explain it, but trust me, I still don't understand why
Da_G said:
Yes, the reason my method does not work is because the rilphone.dll is not signed with a trusted certificate as I stated..
Click to expand...
Click to collapse
And since I'm far from a chef, I really don't know how to cook a cab sorry.
However, try the cooking process that I mentioned in the first post. It's as easy as 1-2-3 and it's fun to start understand a little bit how your device work. Once you open the "de3f3189-9f71-4162-9f26-39393dcc8c94.rgu" file, you'll see that's the whole reg setting of your device. This may helps in the future, because you can actually customize your ROM so that whenever you re-flash it, your reg is already added.
Just try the Kitchen_Raphael (it's small and very easy). It'll take you about 15min to do the whole thing... with NAFT's permission, I'll try to release v3.2 with Rogers display. However, here is a good news for you; NATF is trying to release the first Canadian ROM very soon
Help me to Help you
I was trying change the entry in de3f3189-9f71-4162-9f26-39393dcc8c94.rgu file instead of replacing it to keep all the Tweaks that NATF has done. However, I come up with this error when I tried to build the ROM
"Error building default.hv and user.hv! (see "BuildOS-log.TXT")
I take a look at the file again, and I don't see any important different except for the file properties (ignore the size). Look at the image. The working file is hidden and the hidden option is disable. The non-working file is hidden, but not disable
how do I change make the file hidden and disable the option? I know that DOS can do it, but I just don't know the command.
EDIT---------------------- Solved the problem, but still want to know how to disable Hidden option-----------------------
Ok, I've read several post around the forum, and quite honestly, it didn't help much.
so I did a trial and error... If you want to edit your the de3f3189-9f71-4162-9f26-39393dcc8c94.rgu instead of replacing it, Don't overwrite the file.
1- After you finish to edit save it with another name eg: de3f3189-9f71-4162-9f26-39393dcc8c94_test.rgu.
2- Delete the original file (or move it somewhere else to be sure)
3- Rename your test file to the original name: de3f3189-9f71-4162-9f26-39393dcc8c94.rgu
4- Right click on the file, Properties then make it Hidden
(You may find this funny, but this is my amateur way)
monx said:
that file has system attributes. run this from command prompt to remove all attributes & locked attributes.
attrib -s -h -r -a filename.ext
your rgu file must hv unicode encoding, REGEDIT4 in line 1 & blank space on last line to avoid rgucomp error.
Hope this helps.
Click to expand...
Click to collapse
You mean
attrib +s +h +a filename.ext
then leave 1 empty line on the last line... do I have to add 1 space as well?
Just has to end with a blank line, rather than ending with a registry entry
Da_G said:
Just has to end with a blank line, rather than ending with a registry entry
Click to expand...
Click to collapse
Cool, thanks
Ok, I have successfully change the rgu file. It's one of these Lines, but I don't know which yet and I have no energy today to test 1 by 1 again... so if you can test it for me it would be great
Here are the lines that I've changed to make Call display work
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ; for HTCmaskW1
"HTCmaskW1"=dword:1871
"HTCmaskW1BitMask"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ;for A5/2, A5/3
"En52"=dword:1 ; A5/2
"En53"=dword:1 ; A5/3
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ;for remove RX Diversity
"RMRXDiv"=dword:0 ; Enable
[HKEY_LOCAL_MACHINE\Software\OEM\RIL]
"DisH"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableAutoPickupAtSilentMode"=dword:1 ;disable by default
add ---> [HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\69]
"Timeout"=dword:7918 ; 31 sec.
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\82]
"Timeout"=dword:1D4C0 ; 120 sec.
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\81]
"Timeout"=dword:1D4C0 ; 120 sec.
[HKEY_LOCAL_MACHINE\Comm\Cellular\RIL\RemoteCalltype]
"CalltypeDLL"=" PTTCalltypeCallback.dll" ; DLL containing the callback routine
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000100c"=dword:800 ;Service Loading (SL) Message Policy
[HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContexts\20801] ;Orange FR
"GPRSContextNumber"=dword:2
"UMTSContextNumber"=dword:2
[HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContexts\20810] ;SFR (Voda FR)
"GPRSContextNumber"=dword:2
"UMTSContextNumber"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"BattSuspendTimeoutBackup"=dword:3C
"BatteryTimeoutBackup"=dword:1E
"BattSuspendTimeoutInCall"=dword:30
"BatteryTimeoutInCall"=dword:30
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"EnableIMSIAttachedIcon"=dword:1
Perhaps someone can pick this up for me since I'm not much of a registry guy.
Here is a weird thing that I found about this Tweak
When someone call, the ID will display and all... However, in Call history, it will only display the caller Name if it's a missed call. If you answer it, then it won't show the name ID in call history, but only the number... I'm testing it with FuzeBerry v6 theme. Can anyone confirm this?
and if you know how to fix this, it would be great
Ok, for this tutorial, I deserved a kiss
History:
you all know how I didn't sleep for 2 days just to find what needed to be done to make it work. Now after my 10hr sleep and a bunch of parties for new years, I finally found a way to do this without cooking anything. I need someone to test it for me thou. I've tested on NATF's and Elite's ROM and it works. If this work, a thank you would do.
The Basic:
The Main idea to make this work is to replace the rilphone.dll file and add some registry into it, like I was explained in the first post. Some people claimed that those files need to be cooked in, well, you don't however, you can't just replace rilphone.dll it just doesn't work that way. But I found a way
So How to do it?
1- Download rilphone+reg.zip file from this post
2- Extract the file and you'll find
+rilphone.dll
+rilphone2.dll
+rilphone.reg
3- Copy rilphone2.dll into your Device in \Windows\ folder
4- Copy rilphone.reg anywhere
5- Importe rilphone.reg to your registry (I used resco registry to do this)
6- Change this registry from your device
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone2.dll"
7- reboot
8- copy rilphone.dll into your device \Windows\ folder
9- Change the registry back to
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone.dll"
10- Soft Reset
11- Delete rilphone2.dll
12- Soft Reset
13- Give me a hug
***Please report which ROM have you tried this method with and if it works or not***
--------Edit---------
Ok, so it doesn't work for every ROM. It worked with Elite RC2, thou... I'll give it more tries tonight. Stay Tune
If you want to try this process, please make backup of rilphone.dll first
And please try to put step 5 at the end.
Instead of trying all this, try the cab on post #26... if it doesn't work, just uninstall it. Backup rilphone.dll first. Worst case, just do a hard reset.
---------------------
--------ROM tested with cab-------
- Elite RC2 -> Work
- Proven 1.08 -> did not work
- Romeo -> did not work
-------- I'm sick of flashing and hard reset, so I'll stop here. If you're already on other ROM. let me know.
Good to see you we're able to get this working.
I didn't modify any part of the RGU file in OEMDrivers, so I'm just gonna drop the new DLL and the RGU/DSM you provided here into my v4.0 kitchen.
NotATreoFan said:
Good to see you we're able to get this working.
I didn't modify any part of the RGU file in OEMDrivers, so I'm just gonna drop the new DLL and the RGU/DSM you provided here into my v4.0 kitchen.
Click to expand...
Click to collapse
Ya, it should work... however, can you check if the RGU/DSM file didn't affect QuickGPS? I didn't make any change there, but just check for sure.
Finally, I can sleep with ease now...
My next wish, somebody make a cab or 2 to make my previous post easier
Only problem with non-cook method will be, if target ROM is not cert patched, or doesn't have certificate loaded from rilphone.dll signature it will refuse to load rilphone.dll due to not being signed with a trusted cert..
hey pandaboy,
tried this on my fuze but didn't work, (using proven rom right now) my wireless radio stops working after. i even tried starting over by deleting your rilphone.dll file and softresetting to get my phone working and did the steps again. no go.
Same, my radio is not working now either. Is there anyway to get my radio back?
just delete the rilphone.dll file from your windows directory and perform a soft reset
y2whisper said:
just delete the rilphone.dll file from your windows directory and perform a soft reset
Click to expand...
Click to collapse
When i try to delete it it says cannot delete the file.