thanks to gullum kitchen i managed to correct audio manager for touch X plus add a few more features inside "****** features added *******" below
Step I http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Warning : step I (above file )nvid 5 would change your boot screen and radio version to qtek 2.47 if you do not wish them to change use PVtemp instead here http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip
but i never use pvtemp ,i use nvid5 and i would answer questions for people using nvid5 for step 1 only
Step II http://rapidshare.com/files/72823526/ProphetTouchXmoded.rar.html
or
http://rapidshare.com/files/72793989/ProphetTouchXcorrected.rar.html
Step III hard reset your device
whats new
***********corrected sleep4 file in upgraderom*******
*************wk task***********refer http://forum.xda-developers.com/showpost.php?p=1548370&postcount=116
*************vj device lock ********
*********bt print ,sap ,ftp*********
***bt usb active sync checked and works fine****
QuickMenu (coolest menu ever)
HTC Album launching from the cube
Today:
HTC Home
QuickMenu
HTC Quick link
Dual SIM switcher
****************didnt have space for office launcher***********
Connectivity:
Active Sync
Bluetooth Explorer
************Comm Manager (10 button more productive)***********
Internet Explorer
Internet Sharing
Peek Pocket
USB HDDrive (wm5torage)
Games:
Bubble Breaker
FreeCell
Reversi
Solitaire
Media:
Audio Manager
*****HTC Album*****not set to default because it seemed to have gesture problems but works fine from cube.
Voice Recorder
*******************no Streaming Media ***************************less space again
Voice Speed Dial
******Windows Media Player (shiny original wm11 skin type)*********
Office Mobile:
Excell
Notes
One Note
Power Point
Tasks
Word
Phone:
Call Firewall Find it here by shaileshashar
Group SMS Find it here by shaileshashar
Pim Backup find it here by dotfred
SAPSettings
Sim Manager
SMS Backup
Tools:
Clear Temp
Cube Costumizer
Comm Manager Settings
Device Manager
Action Screen
Java
Pocket RAR
Registry Editor
Screen Capture
Tool Bar Colors
Zip
Other:
Calculator (Touch skin)
Camera
****didnt have space to add -File Explore (extension addon)******
Network plugin
Network Wizard
**********themeX************ is only given this time to add more functionality space was lesserinstead i added blutooth print ftp and sap and wk task and vjdevice lock and power off
you can remove pocketcm after flashing and full install finishes by going into remove programs as some people like original contacts (including me)
thanx to gullum once again for sharing his kitchen recipe with us
just some reserved space for future usage for me
rltoday cab for 3 month and current day date display cab install on your device later
http://www.pocketemu.com/hhc-shots.html customiser works and is faster here download link
http://www.pocketemu.com/downloads11.html
and some more for important tips
tips
1.> after fresh flash if comm manager icons dont show up properly use rotate screen for them and they show up properly and switch back to normal screen they will show up now
2.> if by any chance time display goes corrupted due to soft reset ,( this is a very very rare case)don't hush just press power key for 4 second or more and say yes to switch off dialog appeared on screen then take of your battery for 4 seconds or more and place it back and power on the device ,infact after a fresh flashing one should turn off the device and take off battery for a few seconds ,it kind of freezes the system states for a while just like our freezer does to ice cubes so that they get set where they are.
3.> bluetooth active sync would work finely ,but for USB active sync some PC's you have to disable (untick) advanced network functionality in settings>connections>USBto PC
4.>do not use vjdevice lock too often unless you need to infact don't use too much of any screen lockers , use your power button more often to switch off and sleeping the device
5.>it is not necessary that your device has to go to 0% everytime before you use charger , you can use charger at 30% or any reading but when you put charger to handset please let it charge to full capacity and then only remove it.
6.>please donot modify unlocked extended rom at all after flashing as it may spoil all applcations lying on it reqiring rewriting extended rom or reflashing.i would say rather do not even unlock extended rom too.
okay.. let give some try..
I found that bluetooth repair cabs on your Ext. ROM works well on my edited Touch IX..
thanks..
Good Job
I installed, it looks very well
If I recevie an error I will inform you..
Before any other installation;
25,75 MB free ram
39,19 MB free storage
Many thanks..
CRC error
Well, I don't know if it's me only, but I get CRC error when uncompressing. I will try to download again in a few minutes.
It seems it's just me, since other people installed it right.
varanusvincent said:
I found that bluetooth repair cabs on your Ext. ROM works well on my edited Touch IX..
thanks..
Click to expand...
Click to collapse
its winrar messed up i would change the rom i uploaded since win rar seems to have done merging in same directory where another file of same name existed.
dav9000 said:
Well, I don't know if it's me only, but I get CRC error when uncompressing. I will try to download again in a few minutes.
It seems it's just me, since other people installed it right.
Click to expand...
Click to collapse
try the other link modded one
I hope this rom, dont give a a splash error when try to open some programs like resco photo viewer, because in gullum´s rom was a normal error.
friscoltu959 said:
I hope this rom, dont give a a splash error when try to open some programs like resco photo viewer, because in gullum´s rom was a normal error.
Click to expand...
Click to collapse
i am using resco photo viewer pro v6.33 registered without any "splash errors" which you are saying
any soft reset????
Always works fine for me, but tonight, my battery arrives to 5%, and prophet auto off.
Since there resco viewer, and some other programs, dont work
Kamalneet, can you post Icon HTC-Home cab file ?
Kamalneet, can you post Icon HTC-Home cab file ? I like Icon HTC-Home in your rom, but i have a Hermes.
Thank you so much!!!
Kamalneet, can you post Icon HTC-Home cab file ?
Kamalneet, can you post Icon HTC-Home cab file ? I like Icon HTC-Home in your rom, but i have a Hermes.
Thank you so much!!!
is it possible to upload to mediafire please?
my RS account is full
Some performance tweaks
I created a registry file to change these easily;
- Increase Font Cache (8192 => 16384)
- Increase File System Cache (0 => 4096)
- Increase File System Filter Cache (0 => 4096)
- Disabled Message notify
Steps;
1-Extract .reg file to device or SD memory.
2-Open registry editor & (menu -> registery -> import )
3-Find this .reg file and "select"
dung15 said:
Kamalneet, can you post Icon HTC-Home cab file ? I like Icon HTC-Home in your rom, but i have a Hermes.
Thank you so much!!!
Click to expand...
Click to collapse
i have given link on 2nd post
thanks for this rom.
i am looking for file explorer extension addon, can someone tell me where i can download it??
djkasmic said:
thanks for this rom.
i am looking for file explorer extension addon, can someone tell me where i can download it??
Click to expand...
Click to collapse
here you have the file
THANKS!!!!!
Related
Hello,
I write a little Today Plugin to configure and switch between differents phone modes. The system/phone volume, the ring mode and the SMS, reminders notifs are customizable. The graphics too.
I use it for 2 weeks now but I'd like some people try it and give me their feedback, comments...
You can find all here : PocketZenPhone
These are the future of phone profile control, as far as I can tell. Yours is now the second app to provide this functionality, and more can only be good. The other one is PhoneProfilesSeriously (seriously ), which seems to be full of bugs, judging by the comments made in these forums.
I have some comments about your software. Hope this helps!
- The icons are too big. Maybe we could have the option to choose the profile using smaller icons on the Today screen? I know that we can make our own icons, but even if they are smaller with a transparent surrounding, they will still use the same space on the Today screen.
- I would like more than four definable profiles.
- It would be nice to be able to choose a specific sound to be played for each alert type in each profile (i.e. complete alert- and profile-specific sounds).
Good work!
I can say it's a promising start. However, the setup screen will make THE difference. It's a bit difficult to adjust the configuration using the text file . It reminds me when I was using Borland C++ to develop Win 3.1 applications before the first VB version
I have to do many trials to get the desired result.
Keep going ... Good work!! ... but waiting for the user friendly version
Excellent LITTLE utility.
I had bought "My Phone Profiles", and removed it to use this one. "My phone Profiles" was buggy and made the whole device very slow.
You might want to try the attached settings. Just unzip and copy to:
\Program Files\PocketZenPhone\
I say excellent work (especially with the extra icons)
One thing: Could you find an easier way to setup the profiles, better than to tweak the Phonesettings.txt file
I currently add a window to set the phone modes and I will try to add more settings (notifs ...)
But I have not many time to program this software so it will take a little time to implement new fontions ...
The version 2 is online (download and doc here : http://zendrui.free.Fr )
I add a configuration window and allow to customize the notifications.
I will maybe try to allow to configure the sound for the notification and maybe ring tone but later ...
I don't touch to the icons size for the moment but if it is a big problem I will see :wink:
As always do not hesitate to give me your feedbacks
Thanks
PS : If somenone has made his own icons could it share them ?
Does this software work with WM2002 as well?
I compiled it using the Pocket PC 2003 SDK but I don't use any PPC2003 specific functions.
So this should work under PPC2002 but I cannot try as my XDA is under WM2003...
Let me know if it works ... if not I will try to make a PPC2002 version ...
Being new to this I downloaded the files but they are not the installer type that automaticly install,
They are .001 files what do I do with them?
On a WM2002 machine the programme (v2, 26-2-2004) does not seem to install correctly. After copying and executing the cab file it looks like it installs and it does make the PocketZenPhone directory, but no .exe file can be found. Did I do something wrong?
To Jim
Just copy the file as it is to your device, and run it from there. It will install automatically as a today plugin.
You should have download a .cab file (PocketZenPhone.arm.cab exactly)
Copy it on your pocket (through activeSync for example)
Then on your pocket click on this .cab
It will install automatically the Today plugin.
After that go to Settings->Today->Items and you should see PocketZenphone in the list (it should be checked)
Simply click on ok and when you return to the today page the plug in should appear...
PS for vhan3 : This is not an exe file but a dll file ... so it is normal you don't see it directly on your pocket ... The cab file only creates the registry keys, create the directory and copy the dll on it
No comments at this time but this nice program seems to have lots of promise.
Thanks
Nice work, zendrui
Just 3 comments:
1. After first install, all profiles volumes are set to -1 (Perharps because of an empty regisrty at this time). Should set default values like in V1
2. Uninstall is... arrrggg... impossible until you rename dll and reset. Now, I know... no matter (First tried to uninstall after above bug occured)
3. WORKS GREAT !!! VERY NICE TOOL, VERY USEFULL TOO. THANK YOU !
Serge
zendrui said:
You should have download a .cab file (PocketZenPhone.arm.cab exactly)
Copy it on your pocket (through activeSync for example)
Then on your pocket click on this .cab
It will install automatically the Today plugin.
After that go to Settings->Today->Items and you should see PocketZenphone in the list (it should be checked)
Simply click on ok and when you return to the today page the plug in should appear...
PS for vhan3 : This is not an exe file but a dll file ... so it is normal you don't see it directly on your pocket ... The cab file only creates the registry keys, create the directory and copy the dll on it
Click to expand...
Click to collapse
Thanks for the tips. I tried this on my Qtek 2020: no problems, however on my XDA-1 (WM2002) the plug-in does not appear, nor is it visible in the Today item list.
How do you rename the Dll?
vhan3 said:
Thanks for the tips. I tried this on my Qtek 2020: no problems, however on my XDA-1 (WM2002) the plug-in does not appear, nor is it visible in the Today item list.
Click to expand...
Click to collapse
I will try to compile it for PPC2002 maybe this will make a difference...
But I don't think I will be able to test it as I don't have a PPC2002 target so I will let you try it
Jim Ill said:
How do you rename the Dll?
Click to expand...
Click to collapse
Jim why do you want to rename the dll ?
Serge said:
Nice work, zendrui
Just 3 comments:
1. After first install, all profiles volumes are set to -1 (Perharps because of an empty regisrty at this time). Should set default values like in V1
2. Uninstall is... arrrggg... impossible until you rename dll and reset. Now, I know... no matter (First tried to uninstall after above bug occured)
3. WORKS GREAT !!! VERY NICE TOOL, VERY USEFULL TOO. THANK YOU !
Serge
Click to expand...
Click to collapse
Hello,
1) Ok I will add default params for each modes
2) To uninstall a today plugin you have to disable it before uninstall it.
So to uninstall PocketZenPhone, simply go to Settings->Today->Items, then uncheck PocketZenphone in the list. After that you can uninstall it without any problem (no reset ...)
3) Thanks feel free to give more comments
I will try to compile it for PPC2002 maybe this will make a difference...
But I don't think I will be able to test it as I don't have a PPC2002 target so I will let you try it
Click to expand...
Click to collapse
Thanks a lot. On my Qtek 2020 your programme works great and just as advertised. It is exactly what I needed so I hope you will be able to compile it for PPC2002 as well. I'll test it for you.
Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
GO HERE
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7A ROM ..
Thanks to Jiggs (Thanks Mate!), abusalza for his kitchen and all the other community members
This new ROM is much faster than the old one thanks to some more tweaks and newer versions..
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER
2. Total Commander
4. HTC communication manager
5. HTC Action Screen
6. Network wizard
7. WM5torage 1.78
8. HTC keypad , HTC Keyboard(with T9 Input )
9. HTC CUBE , works AGAIN this time FASTER , MORE RESPONSIVE and as before the Installation is SEMI-AUTOMATIC..(Senses left-right movement ,Very similar to the real HTC TOUCH) Thanks to Kona_Mtbkr
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included
14.X-Button
15.HTC calculator
16.HTC Windows Media Player SKIN
Removed
1.Photo Editor
The free RAM is about - 20 -22 MB(with cube ,and HTC HOME running)
Free Storage :- 35 Mb.
Known Bugs:-
1.Extended ROM does not get unlocked(looking for a solution)
2.A2DP problems
3.Disabling Or Enabling Home Plugins Requires Soft Boot now..
RAPIDSHARE
4SHARED
INSTALLATION
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable DSUU.EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 ,2 ,3 ,4 ,5 ,6 ,7 .cab files on your phone memory when prompted ..
IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..(sry forgot to edit..)
PLEASE DONT SKIP ANY INSTALLATION..
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
You might notice bit slowness during first few startup but dont worry ...it will only be for a few seconds after which everything works smoothly..
After this you are all set to go , the left softkey opens up Action Manager which gives you quick access to new messages etc.. , the right key opens up the new contacts application .
A DOWN TO UP MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
WHEN THE CUBE IS OPENED YOU CAN CLOSE IT BY SNIPPING YOUR FINGER UP TO DOWN.
FURTHER NOTES :-
1. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player(also included.) to view sites like Youtube etc..
2. In the Previous ROM Slide to Unlock was included by default ,this time i have included it as an optional .cab setup so incase you are interested you can simply install it , Note - You don't need to change the skin as thats all preconfigured in a custom CAB
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
I am currently using, jiggs rom 0.7a. and i'd like to give a try on yours but where can i get that mate? Cpacubo...
Rapidshare mirror is up now..mate..
Please READ THE INSTALLATION INSTRUCTIONS CAREFULLY
MMS problem solved?
Does this ROM solve the MMS problem on the previous version?
In the previous version of this ROM, I am having problems receiving MMS even after I do Auto COnfiguration and a Soft-Reset. I did not have this problem when I was on JIGG's AKU070.
I can't really say...but i think it should..man coz nothing at all related to MMS has been touched from the AKU.7A ..so i guess it will..
Sorry i can not check as i dont hv MMS activated..
hi too all
Great work
Hope in this one UNknown contact problam has been sort out.
good rom.
but i have a few questions.
1. is it compatible with atom life?
2. after updating to this rom. can i still use the wisbar to make my phone look like an iphone?
3. does this rom include touchflo already?
4. if i am on the "iphone" theme of wisbar, can i still use touchflo?
thanks!
@t3dong
1.NO
2.Yes
3.Yes
4.-Dont Know-
Thanks , this one works very well..
Ok, thanks a alot. I've downloaded it and will soon reflash my atom with this one... Can't wait to see the cube on mine..
Remember to read instructions carefully, sorry for repeating again but this is very important..
...IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..
Thaks 4 quick replay mate. I will follow your instructions...
wow awesome! what a good-looking rom. i love it very much. You've done a great job mate... keep up the good work. so far there's no problem with this rom. the cube turn nicely to the left and right. the other htc application are good as well. Oh ya, one thing, after i install Audio Booster, the skin of audio manager return to blue not black anymore but it's functioning well. Once again thank you for giving a new look and life to black atom!
can't seem to make the cube work...also the icontacts show nothing...am I missing something?
Yes , you are ..did you care to read the instructions..........please read them
Icontacts works after you have copied all contacts to phone memory..
As for the cube i would suggest you to read the instructions carefully , install all application..in phone memory..
No need to reflash just to a HARD-BOOT(Power +RESET) and follow instructions..
Hope it works this time
Yeah I read them very much..before running the ROM anyway, I did try to do Hard Reset to redo the installation of the cab files but it always hangs up after the 4.cab installation...I'm doing a reflash of the ROM from bootloader to try..
Thanks responding..will let you know
I reflashed...I don't get it...I get the Quick Launch Soft Key on the left but as per instruction it supposed to be the Action Manager
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
cool!
now u become rom creater. hehe. power!!! must pass down ur skill to me.
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
yup..a few times..also I noticed it hangs so much..it only responds to up and down movements..not the left and to the right...
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
SOLVED: HOW TO GET JAXBOT's WP7 LOCKSCREEN TO INITIALIZE JUST BY PRESSING THE POWER BUTTON!!!!
GO BELOW FOR CAB FILE
CREDIT:
A_C for S2U2
Jaxbot for Wp7 Lockscreen
vijay555 for VJBrisk
STEP 1. download and install the program mentioned in POST#7 (VJBRISK) (http://forum.xda-developers.com/showthread.php?t=477519) to your device memory
also download the updated .exe file on the programs thread
Step2. once you have installed the program on your phone take the updated exe file and replace it with the installed one ( program files\vijay555\VJBrisk.exe )
Step3. Make Sure You Have Both S2U2 and WP7 Lockscreen Installed..
Step4. Take the .exe From the "Program Files\ wp7 Lock Screen" folder and rename it to "s2u2EXE.exe" and move it to the "program files\vijay555" folder
Step5. Take The Vjbrisk.exe and rename it to "s2u2.exe"
Step5 1/2. Launch the S2u2 settings program and make sure you enable the lock upon wakeup under general settings and then save
Step6. Now MAKE SURE YOU CLOSE S2U2 !!! do this by clicking the iLock2.exe and you will see a message saying "iLock2 and s2u2 closing..."
Step6. Funpart- Delete everything in the (program Files\S2U2 ) folderexcept these files:
-iLock2.exe
-iLock2.log
-s2u2.log
Step7. Move both of the newly renamed files in the( program files\vijay555 ) folder that we renamed "s2u2.exe" and "s2u2EXE.exe" in to the (program Files\S2U2 ) folder
Step8. press your power button right after copying... it shouldn't work
Step9. press the iLock2.exe program.... it should work now!!!
To Change Wallpaper... Select an image to use and rename it "lockscreen_image.png" and place it in the root folder
couple of notes....
1. you shouldnt have to add .exe when renaming programs
2. When you press the power button you cant immediatly do it again and expect the wp7 lockscreen to be there ... it is a slow program takes about 2 seconds to load so when you turn of your screen it will be about 8 seconds for it to fully initiate
[UPDATE 12/16/10]
Made a Cab!!!!
install to device memory
for the cab you do not need any pre-requisites of programs the little parts of programs needed to make this work are included in the install
program can be uninstalled.. is called intui-tech intui-lock
hmmmmm... it seems there is a sort of apps, which catch power button
in order to display their own menu (shutdown-restart-etc).
Probably some of these ones can launch smth.?
at least you can dig into this direction...
i think that quickshutdown can do this... especially intercepting the power button.
http://forum.xda-developers.com/showthread.php?t=742008
Corwin9S said:
i think that quickshutdown can do this... especially intercepting the power button.
http://forum.xda-developers.com/showthread.php?t=742008
Click to expand...
Click to collapse
i appreciate your suggeastions but what i am really looking for is so that when i press the power button the screen goes off and wp7 lockscreen.exe go at the same time without extra clicking process...
You can probably do it with SK Schema.
Farmer Ted said:
You can probably do it with SK Schema.
Click to expand...
Click to collapse
so... i downloaded it do you have any idea how to build the script .. i tried and failed miserably
http://forum.xda-developers.com/showthread.php?t=477519
Try this. If it was my setup, I would replace the s2u2.exe or whatever it is called with the lock program I was looking for. There is probably a lock.exe of some sort in the windows folder. If you follow the instructions for this program, it will replace the lock program with your specified program automatically whenever it is looking to launch the lock program.
I do this with my calendar and clock and it works like a charm. Hope this helps!
Oh, and give props to vijay555. This really is a brilliant little program.
Fayld said:
http://forum.xda-developers.com/showthread.php?t=477519
Try this. If it was my setup, I would replace the s2u2.exe or whatever it is called with the lock program I was looking for. There is probably a lock.exe of some sort in the windows folder. If you follow the instructions for this program, it will replace the lock program with your specified program automatically whenever it is looking to launch the lock program.
I do this with my calendar and clock and it works like a charm. Hope this helps!
Oh, and give props to vijay555. This really is a brilliant little program.
Click to expand...
Click to collapse
sounds good but i cant really get it to work with s2u2 and the lock exe in windows is uneditable.. ohwell
Quickshutdown has an option to launch an application when activated, without extra tapping. You just have to configure what application to launch and how the behaviour is. So when you push the power button Quickshutdown is launched and the the selected application is launched too.
claus1953 said:
Quickshutdown has an option to launch an application when activated, without extra tapping. You just have to configure what application to launch and how the behaviour is. So when you push the power button Quickshutdown is launched and the the selected application is launched too.
Click to expand...
Click to collapse
thanks guys for your help but i found the perfect configuration for this to accomplish what i want...
i used the suggestion in POST #7 with the s2u2 application ... works very well at launching Jaxbot's wp7 lockscreen just by single pressing the power key
if anyone else wants what i did i would be happy to upload the configuration i am using....
Excellent! Glad it worked!
Trekfan422991 said:
thanks guys for your help but i found the perfect configuration for this to accomplish what i want...
i used the suggestion in POST #7 with the s2u2 application ... works very well at launching Jaxbot's wp7 lockscreen just by single pressing the power key
if anyone else wants what i did i would be happy to upload the configuration i am using....
Click to expand...
Click to collapse
What change did you do in the S2U2 to achieve this?
A step by step guide would be useful !!
pmvyas said:
What change did you do in the S2U2 to achieve this?
A step by step guide would be useful !!
Click to expand...
Click to collapse
STEP 1. download and install the program mentioned in POST#7 (VJBRISK) to your device memory
also download the updated .exe file on the programs thread
Step2. once you have installed the program on your phone take the updated exe file and replace it with the installed one ( program files\vijay555\VJBrisk.exe )
Step3. Make Sure You Have Both S2U2 and WP7 Lockscreen Installed..
Step4. Take the .exe From the "Program Files\ wp7 Lock Screen" folder and rename it to "s2u2EXE.exe" and move it to the "program files\vijay555" folder
Step5. Take The Vjbrisk.exe and rename it to "s2u2.exe"
Step5 1/2. Launch the S2u2 settings program and make sure you enable the lock upon wakeup under general settings and then save
Step6. Now MAKE SURE YOU CLOSE S2U2 !!! do this by clicking the iLock2.exe and you will see a message saying "iLock2 and s2u2 closing..."
Step6. Funpart- Delete everything in the (program Files\S2U2 ) folderexcept these files:
-iLock2.exe
-iLock2.log
-s2u2.log
Step7. Move both of the newly renamed files in the( program files\vijay555 ) folder that we renamed "s2u2.exe" and "s2u2EXE.exe" in to the (program Files\S2U2 ) folder
Step8. press your power button right after copying... it shouldn't work
Step9. press the iLock2.exe program.... it should work now!!!
couple of notes....
1. you shouldnt have to add .exe when renaming programs
2. When you press the power button you cant immediatly do it again and expect the wp7 lockscreen to be there ... it is a slow program takes about 2 seconds to load so when you turn of your screen it will be about 8 seconds for it to fully initiate
MADE A CAB
on first post
Trekfan422991 said:
MADE A CAB
on first post
Click to expand...
Click to collapse
Thanx.
Now can you pl. update the 1st post with new installation steps with the CAB file....??
fxdadbrowser said:
Thanx.
Now can you pl. update the 1st post with new installation steps with the CAB file....??
Click to expand...
Click to collapse
i will add a step by step for the cab however
i dewcided to put just an update addition because im not sure if the developers of these three programs are okay with the cab i created...
i actually had to rename it like a new program because i equally used three different ones so im waiting to hear backfrom them
my cab pretty much does what the step by step says to do iam gonna leave the original step by step there incase they want me to remove the cab
the cab instructions will go in the update section
so does the cab install too the 3 programs? install the cab and bingo! everything is installed and ready to go?
Suitable tsk themes
we can use the wp7 style wm6.5.x tsk files from here
http://forum.xda-developers.com/showpost.php?p=6228524&postcount=165
Very nice but, I have a few questions/problems...
1. Is it possable to adjust the font size ? On my Vzw Touch Pro 2 (WVGA) only Dec is shown in December, as the font is very large (maybe a lacking font for this ?)
2. Is there a way to get better performance from it ? Sometimes when I hit the power button (to wake it) it will not even show the lock screen, then it comes down a few seconds after.
3. When sliding up, I have to make sure my finger goes all the way from the bottom to the top, if I start from a little from the bottom, I have to attempt it again, sometimes this will take 2-3 times before I can open it, Can this be ajusted ???
4. When you change the image, is this the root of the device or the folder created by this installer (Program files\Intui-Lock) ?
Jaxbot said he did not include a font (Segoe WP) causing the text off the screen problem.
http://forum.xda-developers.com/showpost.php?p=7920340&postcount=22
I found the font on XDA with some others, maybe inclue it in your CAB for everyone ?
http://forum.xda-developers.com/showthread.php?t=678190