Hi,
Have a little problem with my dual. Or maybe I simple don't know.
When I want to write sms I see "touch keyboard" input is 2 letters on 1 button. But when I in file explorer for expl. I'm using "touch keyboard" input with 1 letter on button.
How could I fix it? bicause when I'm writing sms I want to see every letter on different button but I can't do that because I have to use only metod with 2 letters on button
Thanx
Sorry for my poor English
Htc Touch Dual
this is not the problem
u can see teh 1 botton keyboard only on some applications like contacts but when you try to make a new sms or email you can see the 2 or 3 botton keyboard nothing can change that unless someone here in the forum will have a tool or reg fix for it
gd luck
motin said:
this is not the problem
u can see teh 1 botton keyboard only on some applications like contacts but when you try to make a new sms or email you can see the 2 or 3 botton keyboard nothing can change that unless someone here in the forum will have a tool or reg fix for it
gd luck
Click to expand...
Click to collapse
i would really like to have the 1 button keyboard as my only soft keyboard for ALL applications. does anyone know a way to imply this?
thanks a lot.
Or modified keyboard
Or possibly modify the touch keyboard so that the full stop & comma are on the 1st page of symbols & the word select area is more finger friendly?
Try the keyboard TouchPal ...is free to use and is great for oane hand use of the phone. I write SMS with it even when driving...
here it is : http://www.cootek.com/
don't know if this helps and if it sets the keyboard to default, but if you press on the little "upper arrow" on the right side to the "20", you can change the kind of keyboard used by the application
I like to have this keyboard too...
Related
Hi. I really dont like the position of the spacebar key on the numeric keyboard of the Rose. It is located on the key 9 (doublepress), but I am used to doublepress the key 0 from my Nokia phone.
Does anybody know, please, how the spacebera can be remaped?
Thanks!
Regards Robert
P.S. Rose is a superb phone, like it very muc.
Exactly; I'd like it to be on the "1" instead of the "#" I guess its only useful for lefthanded people.. I'll either almost drop my phone or break my thumb, lol.).
Any idea's? Already checked the eT9 etc, but no result there.
The numeric keyboard is useful since I don't always wanna type with the keyboard slid open when in the pub
I'd also like to remap a key. When the phone is slid-out the SMS/MMS key and the one next to it with a picture of an envelope on both take you to the SMS inbox. This seems extremely pointless to me and i'd like to remap one to start a blank SMS.
Thanks
Hi,
whenever i use the hard keyboard, that stupid little language bar pops up on the bottom. I always press the eng button by accident and change the language.
How can I get rid of it without, losing softkeys on portrait mode and the symbol function.
thanks!
Ray
The only way I know to get rid of the language bar is to install another keyboard, but you lose the symbol function. Check this thread out for a great alternative, the keyboard linked includes an auto-correction for the physical keyboard, which in my opinion, is a brilliant addition as well as easily accessed symbols.
really?
so theres no way to type underscore "_" in landscape mode?
I suppose if you were desperate you could leave the default text input active and switch to it from the HTC keyboard when you wanna use an underscore. Although that's a little tedious lol.
That sucks...
Thanks anyway
Ray_jai said:
Hi,
whenever i use the hard keyboard, that stupid little language bar pops up on the bottom. I always press the eng button by accident and change the language.
How can I get rid of it without, losing softkeys on portrait mode and the symbol function.
thanks!
Ray
Click to expand...
Click to collapse
Hi,
I guess, you can do it by :
Settings> Locale & text> Un-checking "DEFAULT INPUT"
Hassan
Yes, we know that, but if i do that, I won't be able to type _ anymore.
Lol cant u close the phone and do undetscore thru one of the side sliders of th portrait keyboard.. how lame sony have been with minor amazingly annoying smart ( or dumb lol) phone issues on th xperia range. Iv had th original x1 then x10 m pro and overall pleased with both. Its just th connectivity/compatabillity that's gettin on my goose...
sent from my rebelliousN1
Yes I can, but in the process of doing so, i might press something else and changed the language to estonian or something. It's a great phone, but these small details annoy me. Crapy contact dialer and crappy symbol keys.
anybody know how to type one? my email address has some in it and the only way i can do it at the moment it to close the phone so the soft keyboard comes up and find it in the menu then reopen it again, anybody know if its possible and if so where it can be found?
edit: oops i mean on mini pro
You're serious right?
Press the Sym/àü button on the bottom right... A screen will pop up with all possible other characters.
it does nothing on my phone, i press it and the cursor changes to the same one as when i press the blue button to get numbers, i have got slideit keyboard installed, could it be sometthing to do with that?
I had this issue. Either a: You turned off the option for it in the settings or b: there is a losse connection between the keyboard and motherboard (My problem was the latter). If this is the case, refer to your service centre for repair. (Or strip the phone apart, re-seat the ribbon and reassemble, which is what *I* did, but then again, I do know how to follow warrenty service guidelines so as not to void my warrenty...)
That sym key only works when you have the default input activated. Since you have SlideIt installed, you'll have to long-press on the text area, select 'Input method', choose 'Default', insert the underscore using the sym button, and then reactivate SlideIt. A little bit long winded but that's the only way when you're not using the default input all the time.
That is correct. No third party input application takes into account the sym/au button. I have given the debug log files aswell as the keyid (found in the layout files of the keyboard) of that button to the author of smartkeyboard pro. He has it on his to-do list. Hopefully he can whip up something to fix the problem.
Sent from my U20i using XDA App
i have made my own fix, i added my email address to a slideit keyboard shortcut, now i just type "LJC" and my email addy comes up
cheers for the help though, i thought i was going mad
guys, just a little problem:
I downloaded the latest version and, after enabling the keyboard settings menu - language and keyboard,
when I open a text message, and I try to change the input method, nothing shows, I have the ability to change keyboard
always appears the original, I tried to reboot to disable keybord smart, to re-enable it, but nothing,
When I click on "integration method" returns to the screen with the original keyboard, not smart .. Why?
something wrong? well, I looked around, and I have not found anyone with my problem ..
tips?
hello, I have resolved, I was wrong in practice once you've enabled the keyboard settings menu, open a new sms, and hold on "type text here" so you can choose the input method!
Ha just found this thanks my boss has a wildfire and didn't like the standard keyboard and me having a Galaxy S I thought oh thats easy lets get him a new one.
I had the same problem I couldn't for the life of me figure out how to change the default keyboard glad you figured it out I was there for ages.
Maybe its just you and me
I use SwiftKey a lot and I like it
I found that a keyboard clipkey is a keyboard I would like to use sometimes when I do certain things where sending pre defined phrases to send.
Im looking for a way to quickly change between ClipKey and SwiftKey
Anyone has suggestions how to do it?
Might be a easy way to change keyboard on SwiftKey that I missed, in that case please tell me ??
l1nuxfre4k said:
I use SwiftKey a lot and I like it
I found that a keyboard clipkey is a keyboard I would like to use sometimes when I do certain things where sending pre defined phrases to send.
Im looking for a way to quickly change between ClipKey and SwiftKey
Anyone has suggestions how to do it?
Might be a easy way to change keyboard on SwiftKey that I missed, in that case please tell me ??
Click to expand...
Click to collapse
Every android keyboard that you install and setup in the global input setting menu(input/language mostly) is active and you just need to use the keyboard switch on the top left of your status bar or if you have a nav bar where virtual keys appear you can set the keyboard switch button there.
That's it.