Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
Related
I know there is a wiki and that's why I'm asking... I have this now:
herm100
ipl-1.01
herm100 spl-1.06+
That's on the bootloader screen, and I just did a hard reset. I've been using the default sh*t since it came out and have had so many problems. I want to upgrade to WM6 but I want to make sure it is as safe as possible. What should I do? Like what order? I saw some downgrade and stuff and I don't know.
I tried to upgrade to Hard-SPL-V7 like 100x with the Advanced Connection in PPC on & off. No matter what, I get the Error 260 ( my PPC says the bootloader is trying to run, I say Yes, allow it to run, and then it just disconnects from PC. happens even when I am unresponsive and don't click Yes )
I want to end up with a WM6 that won't eat battery, and will just load fast.
After you give me that advice... I had like 40+ applications before and I did so much to my 8525 to make it awesome and now it's all gone. So can you give me hints to this:
-Application to x out of programs
-How to make it stop shutting off every certain amount of minutes
-How to make it not freeze as often
-Any other hints.
Thanks in advance.
hi, i was haveing error 260 for the last few days
i changed my usb lead and the problem went away
i spoke to someone (cmonex) who said its a problem between pc and phone, try a different pc, but i found changing the cable worked fine
you could also try the thread where they update from the phone memory card, altho it never worked for me (tbh i havent tried it since ive changed my cable)
hope this helps, it might not but i did have same error code
Still the same error...
I'm using the default ROM now and I want to try out WM6 and first try the Hard SPL so it'll be safer. Any other advice guys?
Anybody? I really want to upgrade I've used this same ROM with the same errors for so long now =/
I have found im also getting this problem. earlier I updated to the latest radio software and that went ok and works fine. Now I cant update to anything.
First thing, I take it your Activesync is running fine... what version are you using. 4.5?
To it put as simply as possible. Get HardSPL on your phone some how.
Then stick on which ever ROM you want... Schaps 4.01 seems to be quite popular right now though he is working on a new one with some nice features so you may or may not want to wait.
I strongly advise people to use the MicroSD way of flashing as it's much safer. Many people don't have stable usb connections (and don't know it) which is why they end up bricking their phone. Even if you have HardSPL it's less hassle not to brick it in the first place.
Lastly, you have to search and read (and occasional ask), which is how most people here get their phone working the way they want.
Hey,
Like Wam7 says get Hard SPL on there...Here's a few ideas that worked for me. Please forgive any errors or omissions. Others may have better advice for you as well..
With an error 260, I believe you must first deal with your USB connection issues, ie: make sure you can remain connected properly to effect an upgrade on the bootloader level.
WIN XP: If your running AS 4.5 and getting a 260 error, try connecting to AS 1st, let it sync do all of its work...When the phone is chilled out, then start your wrapper for HARD SPL..There are some more ideas for AS here:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
VISTA: the native WMDC drivers for the HTC hermes aren't compatible when our phones go into bootloader..(That's why you hear 2 distinct "Disconnect/Reconnect" sounds when you go into bootloader)..Use Mr. Vanx's guide to force the connection. It can be found here: MR. VANX'S VISTA GUIDE
After you can connect and get Hard SPL loaded, 90% of your worries may be gone..You can still brick your phone but there's some safety built in.
Another good piece of advice I recieved was to flash your carrier's standard ROM and try it 1st..you may like it...If you don't then see if anyone has cooked a carrier specific ROM you may use...There are a couple of really good At&t specific ROMs: VP3G has a great one..Just try some out to see what you like. Thats the only way to get the ROM you are happy with.
Once you have a rom flashed, somebody told me to do a hard reset before configuring and customizing your rom...Maybe it seems to burn it in..Don't know..
I shut EVERYTHING down when I flash, programs, antivirus, software firewall, anything running in taskbar, SearchIndexer, I even disable my internet connection..I even throw my cat out of the room..15 minutes, its over and evrything can go back to normal..
Good luck..
Thanks for all your replies.. but this one, jesus christ. Dude, literally after I read this I followed the steps, and in 10 minutes I have Hard SPL AND the Scaps ROM there. Your advice is f*cking Godly, everybody who has my error... FOLLOW IT! His advice literally 101% solved my problems! Thanks so much bro!
shihayadreamer said:
Hey,
Like Wam7 says get Hard SPL on there...Here's a few ideas that worked for me. Please forgive any errors or omissions. Others may have better advice for you as well..
With an error 260, I believe you must first deal with your USB connection issues, ie: make sure you can remain connected properly to effect an upgrade on the bootloader level.
WIN XP: If your running AS 4.5 and getting a 260 error, try connecting to AS 1st, let it sync do all of its work...When the phone is chilled out, then start your wrapper for HARD SPL..There are some more ideas for AS here:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
VISTA: the native WMDC drivers for the HTC hermes aren't compatible when our phones go into bootloader..(That's why you hear 2 distinct "Disconnect/Reconnect" sounds when you go into bootloader)..Use Mr. Vanx's guide to force the connection. It can be found here: MR. VANX'S VISTA GUIDE
After you can connect and get Hard SPL loaded, 90% of your worries may be gone..You can still brick your phone but there's some safety built in.
Another good piece of advice I recieved was to flash your carrier's standard ROM and try it 1st..you may like it...If you don't then see if anyone has cooked a carrier specific ROM you may use...There are a couple of really good At&t specific ROMs: VP3G has a great one..Just try some out to see what you like. Thats the only way to get the ROM you are happy with.
Once you have a rom flashed, somebody told me to do a hard reset before configuring and customizing your rom...Maybe it seems to burn it in..Don't know..
I shut EVERYTHING down when I flash, programs, antivirus, software firewall, anything running in taskbar, SearchIndexer, I even disable my internet connection..I even throw my cat out of the room..15 minutes, its over and evrything can go back to normal..
Good luck..
Click to expand...
Click to collapse
Well it turns out all I needed to do was do a Phone reset and all was fine again. ended up ditching the new rom as It messed up my adress book on the PC and a few other things wernt too hot. Gonna try another one later.
Error [302] - updating to WM6 on a 8525
I'm trying to upgrade to WM6 and gets to 64% of the update and I get this Error [302].
Herm100
IPL-1.04
SPL-2.10.olipro
R 1.54.07.00
G 32.86u7020.23H
D 3.62
Anyone with this same problem????
I have Imate JasJam and I installed this ROM
http://forum.xda-developers.com/showthread.php?t=412895
my phone worked fine for a week but since yesterday I am facing this weird problem, my phone gets stuck and when I do a soft reset, the phone actually gets a hard reset every time.
what is the problem,
well after a hard reset I connected it to pc on active sync and it is working fine till now
ok it worked but I have another problem.
Many times when I reset or turn on the phone, it gets stuck in start and does not load windows, I have to hard reset the device.
What is this problem?
You either need to install a stock ROM before re-installing the ROM you want or you need to check for bad blocks using MTTY.
Do a search to find out about bad blocks...
man I am a total n00b can you please guide me the whole procedure I will be grateful
sheharyar said:
man I am a total n00b can you please guide me the whole procedure I will be grateful
Click to expand...
Click to collapse
i think in this link you find a solution...
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
man I tried to install Hard SPL v7 but it didnt install, it gives this error make sure your device is connected to usb or is on the cradle.
I have the same problem and it is only getting worse
Have checked for bad blocks using http://forum.xda-developers.com/showthread.php?t=377389&highlight=mtty+wiki and none show up
Have tried jasjam and dopod original roms for Australia with no extra cabs installed but it is just getting worse
Connecting to a computer with active sync seems to make the phone work a bit better but only for a day or two
Cleared memory removed battery several times but device is just becoming more unreliable
Was going to throw against wall but decided to buy a htc fuze INSTEAD
Jasjam may still hit the wall
anyone have any suggestions
Thanks
Barney318
Right, looking at the ROM sheharyar was using, its a big storage ROM. You need to install a stock rom first, preferably stripped of the radio rom, and go through the complete setup. It seems to stabilize the memory. You can then re-install the big storage ROM. It should now be stable.
If you need to install Hard SPL then go to page 116, post 1160 of the" Hard SPL or how not to brick your Hermes" thread. It gives you instruction on how to install via the sd card method.
After installing Hard SPL you can use the sd card method to install roms. Just drop the steps using sspl.exe. Also use a 2Gb or less sd card formatted FAT32. Watch the spelling of hermimg.nbh as it won't work with mistakes.
Also make sure you have good battery level.
Happy flashing...
I recently flashed to the new AT&T Test ROM 5.08. Basically I want to flash an energy rom over the AT&T and am having issues. Any rom I try to flash will go the gray loading screen on the phone and then hang up and gives the error 260 connection lost. I tried running the Raphael custom RUU before flashing the energy rom and I get an error 240 trying to run the custom ruu. I tried running the raphael unsigned hardspl and that only takes me to the black screen. From the black screen I've tried running the custom ruu and energy rom and nothing happens. Can anyone help me because I'm tired of this rom and I can't get anywhere!
Power off your device, hold the Volume Down button (keep hodling it), turn the device back on.
You should see the TriColor BootLoader screen; it should halt with USB or SERIAL displayed on the bottom white portion of the screen. Note the information that appears on the screen and post the details. To return to normal device operation, remove the battery for 30 seconds and put it back in.
That should assist us in determining the next steps.
HTH,
Screen appears:
RAPH110
SPL-5.08.0000
PSOC-Raph STAGE-CVT V0x36
PCBID 0x00
RID 0x0
Serial
It would appear that the HardSPL did not "take" or hasn't been applied yet. Here's the link to the HardSPL thread and Wiki page:
http://forum.xda-developers.com/showthread.php?t=410150
http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL
Once the HardSPL is applied, you should be able to flash custom ROM's to your device. If you need a "refresher" on flashing, have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=448008
Lastly, although optional, you may want to consider performing a SIM unlock.
HTH,
It freezes the phone on the gray loading screen when trying to hardspl and then gives the 260 error code connection lost. I followed all the guides and nothing works (hence the point of starting the thread in the first place). I am a noob, but not a complete idiot that can't read guides. I understand if I can't hardspl, then I can't flash a rom. Well the hardspl does not work for me! I have tried the unsigned version which freezes the phone loses connection. I've tried the raphael wrapper which only takes me to the black screen and gives the error 240. From the black screen I cannot run spl or roms. I tried running stock spl's. I don't understand how the Test ROM flashed fine and now I can't flash anything.
The test rom worked fine because you don't need hard spl to flash it; it matched the carried id of your phone (CID). Hard spl CID-unlocks your phone, so you can flash non-ATT roms.
You should never try to flash a custom rom without hard spl. In the best case scenario, you'll be stonewalled. You need to use the wrapper that comes with the hard spl package to flash hard spl. Using any other wrapper is a waste of time. It says this clearly in the hard spl thread, where you should have posted your question. If you read the last 50 or so posts of that thread, you'll come across a post by Captain Throwback. He had some problems flashing H-spl, and he found some tricks to get it going. I suggest that you search the thread for his how-to. My guess is that you're forgetting something obvious, like turning off your anti-virus software or installing net framework 3.5 on your pc (if it isn't already there). You have to flash hard spl off of your pc, so don't even bother trying to flash it off your sd card. It's probably easier to do it off of XP than Vista.
I already tried the raphael wrapper as I stated twice. Raphael wrapper takes me to the black screen (where I read about the post by captain throwback). I followed everyones instructions that got it to work and still the same thing happens. The Wrapper only takes me to the black screen where I cannot do anything because the computer isn't synced with my Fuze and will not. Then the error 260 message comes up saying that there is no connection. Hence the point the wrapper won't work even with xp, antivirus turned off and 3.7 framework (even tried going back to 3.5 and same thing). I even tried doing everything at home on my vista notebook and the same things happen.
I already tried the raphael wrapper as I stated twice. Raphael wrapper takes me to the black screen (where I read about the post by captain throwback). I followed everyones instructions that got it to work and still the same thing happens. The Wrapper only takes me to the black screen where I cannot do anything because the computer isn't synced with my Fuze and will not. Then the error 260 message comes up saying that there is no connection. Hence the point the wrapper won't work even with xp, antivirus turned off and 3.7 framework (even tried going back to 3.5 and same thing). I even tried doing everything at home on my vista notebook and the same things happen.
Few questions:
1) Under usual conditions, does the device establish a connection via ActiveSync?
2) Does the problem occur in a new user profile /w Admin priviledges on your XP workstation where you establish a Guest connection via ActiveSync to the device?
3) Have you tried a Hard Reset on your device prior to flashing HardSPL?
4) Have you removed the SIM and any SD Card for the time being?
5) Are you able to successfully flash a non-test version of an official AT&T ROM to your device?
1. Yes alot. Only use it for transferring files and battery charging.
2. No, registered device in activesync with full administrative rights to my workstation. I don't have any problems with losing connection during file transfer, etc.
3. Yes, did a hard reset a couple weeks ago and same thing. Possibly going to try it today again because I installed a couple programs before attempting hardspl the last time.
4. I take them out when trying to flash
5. No, I'm stuck with the AT&T Test ROM. Have tried ones on here that are supposed to be stock AT&T ROMs and the same thing happens.
Your response to #5 concerns me; just to make sure I understand ... you are unable to flash an official ROM to your device?
Here's the link to the latest official AT&T FUZE ROM:
http://www.htc.com/us/SupportDownload.aspx?p_id=198&cat=2&dl_id=553
Springboard URL: http://www.wireless.att.com/answer-center/main.jsp?t=solutionTab&solutionId=KB95876
Download the ROM and try flashing it to your device; if it fails ... time to call AT&T, you have a problem with your device.
HTH,
bratch15 said:
Hence the point the wrapper won't work even with xp, antivirus turned off and 3.7 framework (even tried going back to 3.5 and same thing). I even tried doing everything at home on my vista notebook and the same things happen.
Click to expand...
Click to collapse
Is there a net framework 3.7 for pc's? Or are you talking about your phone? You need net framework 3.5 on your pc to run the flash. It won't work with 2.0. It doesn't matter which compact framework you have on the phone.
Did you already try putting your phone in Bootloader mode, and then connecting it to your PC? Does it load the Qualcomm CDMA Technologies/HTC/Pocket PC USB Sync driver? Did you make sure the SIM and SD cards were removed from your device? FYI - You HAVE to use the RUU that comes with HardSPL in order for it to flash successfully. If you've verified that your computer has installed the drivers, and then been unable to successfully complete HardSPL, I'm not sure what to tell you. Do you press "yes" on the Device when running the HardSPL RUU & you're prompted to run the program?
Those are all the suggestions I have.
Last night as I was driving home my phone kept disconnecting as it was charging. I finally found the answer! First time it ever did that. So its back to AT&T for a new one. Probably should have mentioned that the phone was submerged in the toilet (thank god before the #2) a couple months ago. The phone went crazy and started saying error messages with email and then lines going thru it. But after a couple days of drying it worked fine again.
THREAD CLOSED!!!!!
Always wanted to say that
bratch15 said:
THREAD CLOSED!!!!!
Click to expand...
Click to collapse
If you say so...
Hi All,
Seams I have done a stupid thing,
I have flashed a SPL 3.5 ROM (TAXIS ATHE100_WWE_96_192_4.SS.TX_WM6_1_b21041_1_6_0) onto my X7500 Dopod (U1000 phone) that only had SPL-v1.20.Olipro inplace!!!
(I was testing a few ROMs stored on my hard disk and picked the wrong one to flash!)
Now every time I start the phone I have to re align the cursor/stylus (which probable indicates a major problem!), and I don't like this ROM for lots of reasons - it probably suits someone else just fine but it's not for me
I can still connect to the X7500 with Mobile Device Center (MDC).
But when I try to re-flash any other ROMs (those that previously worked with SPL 1.2 the day before) using a USB cable and MDC, after 30 seconds or so it fails with ERROR 260 CONNECTION error on MDC, but the cable is good! During the process the phone starts to reboot, the screen is messy (bad video driver or something?) and then it launches the already installed TAXIS Windows Mobile to be Aligned again!
I have see some other issues that have a bit of similarity to this but cannot find a solution.
Any comments would be appreciated. I've only had the device for a few days. Is there a workaround to recover this. I think I can access folders and copy files to the device from MDC although I have not tried this.
Sorry for the long post!
Regards
Markster
me again....
I'm still a bit confused, is it possible to upgrade the SPL to 3.5, which I should have done in the first place..... or is it too late for that.
You can try the sdcard method if the device still have SPL 1.20-Olipro ... Read the wiki
Thanks for the suggestion... I will give that a go. Though for some reason I can no longer get the tri colour screen anymore. I recall now that I left the sdcard and sim in when I initially botch things up and have since read that causes unpredictable results. I can still launch win 6.1, but it re-initialized ever time I start up and I have to re-enter data. Not good, almost but not quite a brick!
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
SHIK1 said:
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
Click to expand...
Click to collapse
****.... tough luck mate....
As long as u got rid of hspl you should be able to get the phone fixed by htc or tmobilie or whatever plan ur on..
Good luck
bought it off ebay..so cant really take it to my provider..the phone is over (just) a year old so probably not in htc warranty? how do i check?
i will donate money to anyones paypal account if they can help fix this
Install the correct stock ROM (the one who match with your S/N) over SD.
how do i know which matches? and how do i do it via sd?
SHIK1 said:
how do i know which matches? and how do i do it via sd?
Click to expand...
Click to collapse
Put in your serial no of your phone (found underneath the battery) into the HTC support website and you will find the ROM that matches your phone. You will then need to download the ROM, extract it and take the .img file out of it and rename it as LEOIMG as before and flash via SD card.
shouldn't even need to use sd card. the correct rom should downgrade the spl over usb.
phone into bootloader,connect usb, run your update .exe, done.
you are guilty of getting over excited and lack of research. five minutes should have told you that you can't use hspl to install 3.14, and that flashing from sd first removes hspl,changes spl, then runs the compatibility tests again and shows exclamation mark if it fails.
I had the same problem i thought i bricked my htc which i was testing before buying i know stupid idea brick the phone before i buy it, basically i had installed hspl 2.08 from 1.42.00 and installed the froyo ROM build which was all good it was working but running really slowly, i couldnt get the ringtone to change which was probably due to the fact that the build did not come with any preinstalled which is fine as i downloaded a ring on mp3 and set it as that, and the radio was one of the latest which wasnt giving me a good reception so i decided, fine that's ok let me get my hands on some apps now so i downloaded a couple tweaks, multiboot and games and put them on my sd card; as well as a tweak to enhance the speed as it was going really slowly on the android, the second i put my sd card into the phone and tried running metamorph an app i was advised to use to apply a windows 7 mobile theme the phone went blank, the only way to get the phone into tri coloured screen mode was to plug it in via the FRONT usb port of my machine which would bring my phone back to life.........oh so i thought, so i was able to see the phone load up to htc white load screen and it would display my buil in red BUT after that it should show the "quietly something something message" and load right.....WRONG the phone just restarted and it would just do the same thing go to htc and restart so i managed to use the vol down+cancel call button to kick it into the tri coloured screen and managed to get the phone back into hspl 1.42.00 which completed but then i still couldnt get past the htc welcome screen!! ARGHH!!! So after spending a whole night applying different hspl's and trying to reflash teh rom via usb and failing i thought id give up and just pay for a bricked phone which i was paying £150 for btw (i know a bargain and brand new!!!) BUT as i came into work today i thought let me try a different pc as that may affect it, and after i downloaded an official ROM update for the phone 1.72 i i plugged my phone in and after literally 20 seconds the bloody thing turned on and started working as normal with no multiboot or rom installed i think i shall be CAREFULLY installing android on the phone one last time. . . . I hope this helped any users out there as i was panicking, and please remember that whatever you do is seriously AT YOUR OWN RISK, do not just jump the gun...sit down do some proper reading and watch some videos because after having to trouble shoot i must say im pretty good at applying roms hahahah i shall be very cautious from now on though. . .. sorry if the post was too long i am a noob my first post!!
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
So u managed to save ur HD2 and now u wanna swap it?
keep HD2. Its great, and so many possibilities. U must know what ur doing, tho (kindof)
Also, his link for donation is everywhere. 'DONATE' 'DONATE TO ME' 'If you like my work buy me a beer'
haha..oh yes missed the donate button..
im a bit sick of the winmo set up... it's just abit too fiddly with soo many settings to mess with..plus the handset gets hot too quickly recently and turns off, vibrates when i turn it on and freezes... need to get rid before it gets worse.. cant be bothered with the hassle.... besides.. i like the android phones..so ill go back to them...
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
aminuli said:
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
Click to expand...
Click to collapse
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
fred_up said:
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
Click to expand...
Click to collapse
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
aminuli said:
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
Click to expand...
Click to collapse
Assuming, from your icons, that the HD2 is locked to O2; therefore you should be able to download the O2 1.72 ROM (no HSPL required) and it will not invalidate your warranty.
nope thats just what tariff i am using. . .Ive been looking around and now im qutie confused i thought the process for having android on the htc was literally
Download a hspl and install - reset
Download a radio and install - reset
Run CLCARD.EXE then HARET.EXE and presto were in android, now unless something has changed is this right because im about to.
Download hspl3 and install - reset
Download radio and install - reset
Download a ROM and install and - reset
now is this the neccessary steps or am i about to mess up my phone again =.=
It would be helpful to know which ROM, RADIO and SPL you already have.
As for running Android, all that is pre-required is that you have the minimum .50 RADIO (it should be specified in the Android ROM's page). Although flashing the newest RADIO (2.15.50.14) won't do any harm.
Although I am with T-Mobile UK, I have the HTC 1.66WWE ROM, 2.15.50.14 RADIO and 1.66HSPL (via HSPL2). I downloaded an Android version and installed it on the SD Card. It works fine. Since I only tried it a couple of times, I can say that it boots and generally works. But I prefer WimMo.
SHIK1 said:
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
Click to expand...
Click to collapse
If you want android only (wich i would), yes swap it.
done... galaxy is awesome..so beautiful...quiality samsung os + android
never ever getting a winmo phone again ..had 3.. all fiddley beyond belief...