I unbrick my htc p3600 with HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!! Can somebody create Hermes unbrick because when i use Hermes i always see message image corrupted because i not have activesync in my HERMES stack in logo only bootloader!!!!Cid locked!!! i can not intsall any rom hardspl...etc...try more then 50rom and all hardspl...all cid....now only see this http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl ??? Sory for my bad english please need help where is pof???
please read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
this not work because i ask to someone create Exploit???
this not work i try all i not have kitl mode , and can not use SSPL+ActiveSync because i stack in bootloader-no active sync my problem is to change bootloader when device is cid locked only solution to create Hermes overflow exloit and when i have temporaly cid unlock my device then i can flash rom.
Flash a cooked ROM, leave the device in bootloader mode, connect with USB....run the RUU and select your bootloader version.
The RUU shouldnt care that the device is already in bootloader mode, just follow the usual steps.
Explain me more because
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
How to jump spl address in hermes from dos??
Is any chance to jump spl to address in hermes or artemis from dos or mtty command what is spl address for hermes bootloader for artemis spl address is:.
* Kaiser Jump address is 0x00000000
* Artemis & Herald Jump address is 0x10000000
How to chenge bootloader in cid locked demaged
cid in hermes ???? HTC Trinity Stack Overflow exploit have this read in :
http://forum.xda-developers.com/showthread.php?t=308691
Who can explain and create for hermes?????
It's wierd!!!
there is no sign of POF and olipro!
I want to know where are they!!!
Maybe they are hired by HTC
Unbrick of Hermes IPL 1.04 SPL 2.03
mbsshop1302gsm said:
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
Click to expand...
Click to collapse
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
edyfast said:
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
Click to expand...
Click to collapse
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Tested! But DID NOT HELP!!!!!!!!!
8525 bricked IPL 1.04 spl 2.03 Solution
koorosh_bsboys said:
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Click to expand...
Click to collapse
Hi
It is a WM5 Rom, this is the only one I tried that worked at the first try!, however it seems at the beggining that wont work because it takes too much time to advance in the percentage bar on downloading, for me took about 35 minutes, the good notice is that this rom completes the installation and installs a WM5 but it is a good start since once you are done with this you can install hard spL on your phone, you mentioned that didn´t work please be patient if you notice that the percentage bar is working, at the end this will fix your phone.
where
can you sent me link to download or put in megaupload to try this rom please respond its very urgent to try.Sent me link to download??
And if my phone cid locked this will work or not???/
Unbrick 8525 IPL 1.04 SPL 2.03
Hi
here is the link:
http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship.exe
My phone was cid locked and KITL disable before I fixed it! now I did the unlocking using PoFs cid and sim unlocker and it worked fast and easy at the first try!
I understand your urgent requierement I was 15 days with my phone damaged with the only showing of IPL 1.04 and SPL 2.03 "serial" text on the bottom.
This Link Not No File Found
CAN YOU UPLOAD NEW LINK this link is dead :http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30 .00_108_Ship.exe
please use megaupload.....respond me please when you add new link.
THIS LINK is dead NO FILE FOUND
This will not work only solution to unbrick any Hermes stack in bootloader cid locked that somebody create Herems Stack Overflow exploit - ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl temporaly tehn we can flash any rom ???
Here is link for Trinity and work i unbrick my p3600 with this cid locked stack in bootloader:
http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes
Sory for my bad english please need help where is Pof to creat this for Hermes??Imei check and htc men help??
How to unbrick herm100 in tri-clour mode
download Mtty1_42.
CONNECT brick herm100 with usb
FROM the port setting,choose USB
A white page should open
TYPE set 14 0
TYPE set 16 0
soft reset with stylus.
HURRAY u are down.
dont 4get to say thanks
Related
PLEASE HELP I HAVE BRICKED TYTN CAN NOT CHANGE BOOTLOADER CID LOCKED??HELP PLEASE WILL PAID WITH PAYPAL IF ANY MAN CAN HELP ME....
I wanna know whether any one is working to find a sulotion to unbrick the bricked devices HTC TYTN with "SPL 2.03, IPL 1.04, NO GSM, KITL Disabled"!!!!!???????Can not boot only bootloader WHEN PUT IN MTTY, Cid locked LEVEL=FFF
I try this :http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
- NOT WORK always 100% then message : image corrupted !!!!!!! And not change bootloader....
Sd card not work format sd card fat32 and try all TYTN ROM!!!
hen i tried to rom upgrade using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
it looks like LOSE super CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
Cmd>info 2
HTCSF kEØ(HTCE
Cmd>
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
----------------------------my bootloader is changed...HELP PLEASE
any suggestions????
any solution to fix this and bootloader AND ALL PLEASE.....
I have tested everything on my bricked hermes but didn't work! READ ALL IN XDA DEVELOPER BAT NOT FIND SOLUTION-SD CARD NOT WORK????
IS ANY SOLUTION I AFTER I READ ALL IS ANY CHENCE HELP ME I WILL PAID WITH PAYPAL IF YOU CAN GIVE ME SOLUTION FOR MY HTC TYTN PLEASE
THANKS FOR ALL AND I HOPE THAT POF WILL RESPOND ME ITS VERY IMORTANT TO ME.
SORY FOR MY BAD ENGLISH....
If you get no replies here, try post it on the link in my signature. I've posted things there for work and found some decent bids.
Olipro Hard Spl 7 NOT WORK ...
Olipro Hard Spl 7 OR ANY HARD SPL NOT WORK WHEN TRY TO UPDATE MY TYTN I SEE 100% IN MY PHONE THEN MESSAGE IMAGE CORRUPTED. IS ANY CAN HELP ME.???????????
Pof did not show up here in last two months. Wondering what has happened to him.
Exactly same issue here.
it seems that there is no sulotion for it for now
I took my device to a service center (not imate servicecenter, because there is no imate certified service center here in my country) and they told me that they should replace my imate's motherboard with a new one and that will cost me about 420$. f***cking service center. i have a bricked and useless jasjam now!
Guys I took a look at the Hermes Unbricking page and I think that you fall to the category not even Pof can repair. Your bootloader is not directly mentioned but the circumstances of your case are the same as in:
1.06, 1.09, 1.11 or 2.02, Any HTC Boot, Will not boot to windows, NO GSM, NO KITL - Bricked while flashing radio, bootloader doesn’t allow to flash unsigned code. BRICK - Send it to repair centre, warranty... Basically you are in the very same situation - only your bootloader version is different - but it is an official bootloader that does not allow unsigned code flashing.
try unpacking the official upgrade from your service provider with ruuwrapper. I had this problem and it worked for me.
ruuwrapper not work!!!
i try to rom upgrade using ruuwrapper
(try offical htc rom and many other more then 20 htc roms) it only shows 1% and my device reboots and ....
it looks like LOSE CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
------------------bat before lose cid i have super cid!!!
mbsshop1302gsm said:
i try to rom upgrade using ruuwrapper
(try offical htc rom and many other more then 20 htc roms) it only shows 1% and my device reboots and ....
it looks like LOSE CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
------------------bat before lose cid i have super cid!!!
Click to expand...
Click to collapse
Dude!, I have exactly in the same situation as you.
I think the only way we can fix our devices is to find the bootloader password and then flash the radio with MTTY. The most important problem here is that we cannot flash our devices using ROMUpgradeUt.exe because it cannot connect to our devices, so we cannot find the bootloader password using the pof & esteve method "HTC Hermes BootLoader PASSWORD".
We can only flash our devies using the ROMUpdateUtility.exe.
I tried to do the above method on ROMUpdateUtility.exe and RUUResource.dll instead but there is no password field in RUUResource.dll . Maybe someone like pof should work with this dll to see how does it works!
Solution That Sspl-herm.EXE Can Start With Windows Command?? AS I SAY IN LAST POST
koorosh_bsboys said:
Dude!, I have exactly in the same situation as you.
I think the only way we can fix our devices is to find the bootloader password and then flash the radio with MTTY. The most important problem here is that we cannot flash our devices using ROMUpgradeUt.exe because it cannot connect to our devices, so we cannot find the bootloader password using the pof & esteve method "HTC Hermes BootLoader PASSWORD".
We can only flash our devies using the ROMUpdateUtility.exe.
I tried to do the above method on ROMUpdateUtility.exe and RUUResource.dll instead but there is no password field in RUUResource.dll . Maybe someone like pof should work with this dll to see how does it works!
Click to expand...
Click to collapse
YES MATE I THINK BAT WHERE IS POF!!! POF WHERE ARE YOU????
OR
Is Any Solution That Sspl-herm.EXE Can Start With Windows Command?? I MEAN I CAN ONLY PUT PUT MY BRICKED TYTN IN BOOTLOADER BAT CAN NOT START SSPL-HERM.EXE BECAUSE NOT WANT TO LOAD ....IS ANY CHANCE TU START Sspl-herm.EXE WITH WINDOWS COMMAND TO CHANGE BOOTLOADER TYTN IN SSPL HERM THEN WE CAN FLASH BRICKED DEVICE!!!??
SO I HOPE THAT SOMEBODY CAN CREATE PATCH FOR THIS THAT SSPL-HERM.EXE CAN START IN WINDOWS THEN CHENGE BOOTLOADER IN HERMES WHEN HERMES CONNECTED WITH USB AND ONLY CAN LOAD BOOTLOADER.....
I MEAN
THAT Sspl-herm.EXE CAN RUN IN WINDOWS AND CHENGE AUTOMATICALY BOOTLOADER IN PHONE WHEN PHONE ONLY CAN RUN BOOTLOADER AND CAN NOT RUN OS...I HOPE THAT YOU UNDERSTAND WHAT I MEAN SORY FOR MY BAD ENGLISH.
mbsshop1302gsm said:
YES MATE I THINK BAT WHERE IS POF!!! POF WHERE ARE YOU????
OR
Is Any Solution That Sspl-herm.EXE Can Start With Windows Command?? I MEAN I CAN ONLY PUT PUT MY BRICKED TYTN IN BOOTLOADER BAT CAN NOT START SSPL-HERM.EXE BECAUSE NOT WANT TO LOAD ....IS ANY CHANCE TU START Sspl-herm.EXE WITH WINDOWS COMMAND TO CHANGE BOOTLOADER TYTN IN SSPL HERM THEN WE CAN FLASH BRICKED DEVICE!!!??
SO I HOPE THAT SOMEBODY CAN CREATE PATCH FOR THIS THAT SSPL-HERM.EXE CAN START IN WINDOWS THEN CHENGE BOOTLOADER IN HERMES WHEN HERMES CONNECTED WITH USB AND ONLY CAN LOAD BOOTLOADER.....
I MEAN
THAT Sspl-herm.EXE CAN RUN IN WINDOWS AND CHENGE AUTOMATICALY BOOTLOADER IN PHONE WHEN PHONE ONLY CAN RUN BOOTLOADER AND CAN NOT RUN OS...I HOPE THAT YOU UNDERSTAND WHAT I MEAN SORY FOR MY BAD ENGLISH.
Click to expand...
Click to collapse
I know what you mean
But unfortunately sspl-herm.exe is a WinCE application and cannot run on x86 or x32 windows.
sspl-herm.exe is a WinCE ?
yes i know this bat i try to work to resolve many bricked device so is any change to create somebody pach that work in windows xp ???I mean when i click in this icon sspl-herm.exe that automaticaly change bootloader in bricked tytn when i have only bootloader ??/
MTTY's "wdata" cmd unlocked on SPL 2.03!Can it Unbrick the bricked ones w SPL 2.03??
I have found a way to unlock "wdata" command in bootloader 2.03!
summary:
In bricked hermeses with SPL 2.03 - NO GSM - KITL disabled, the wdata command is locked. I am not good at programing but I want to know if it possible to change the SPL(bootloader) of bricked hermeses with this command in mtty.exe??!!
How to:
1.Use the trinity splxploit -windows by pof (unbrick.bat). Let the program run for some seconds and then just close that.
2.Do not unplug the usb or soft reset the device.
3.Run mtty.exe and type "wdata" the command is unlocked!
I wanna know can we erase just the CID by erase command and write a CID value using wdata command?
If it can be done then we can unbrick our hermeses!
Yes it enable wdata, you don't need to change CID, if you can load OS.nb, then from Windows use SSPL. But real problem is how to load OS.nb via wdata
need Hermes splxploit -windows ??
i many time write in this forum who can unbrick hermes with spl 2.03 cid locked,no kitl,can not boot,stack in bootloader....only solution is that pof
or good man create Hermes splxploit -windows this will jump spl address and temporaly cid unlock Hermes then we can flash any rom.
I unbrick many Trinity bat wait solution for Hermes???
Bat wait ........and wait.
Zemo znas li ti kako da sredis brikovan hermes cid zakljucan spl 2.03...itd.
Yes, we need pof help, it will be very good to have spl exploit for hermes.
Bas nas dosta ima na XDA, mozes samo preko JTAG koliko je meni poznato ali neznam nikog ko to moze da uradi. Odakle si?
Yes, we need pof help. It will be very nice to have SPL exploit.
Mislim da moze preko JTAG, ali neznam ko to moze da uradi, odakle si?
Bad news people,
The memory layout on hermes is different than on trinity, i already looked
into this and is not possible to exploit it in the same way as I did in
trinity.
I am sorry but I have no time to invest on this now
Best Regards,
pof
Click to expand...
Click to collapse
We can wait for pof, and pray
So, we will wait.......!
I'm a prayer too
So, we will wait.......!
I'm a prayer too
Reply With Quote
Click to expand...
Click to collapse
MY HERMES IS BOOTED OS TODAY!!!
It was half dopod and half T-Mobile...
T Mobile Customanisation: Instalig Dopod stuff???
I soft reset it and it stuck again.
Booted OS
Today my hermes booted os, after soft reset it stuck again. But there is hope, right?
Can you solve No GSM with SD Card Flash?
Then Copy Hardspl V7 to the sd card and when your mobile booted into os just run that from your device.
Yes, I know that.
If you have similar problem:
1.Leave Hermes without battery for some time, hour or so.
2. DO NOT turn it on, do a HARD RESET*
*If don't work try several times
hardspl v7 or any other after 100% message image corupted
koorosh_bsboys said:
Then Copy Hardspl V7 to the sd card and when your mobile booted into os just run that from your device.
Click to expand...
Click to collapse
Yes i know this bat this will not work if hermes cid locked and stack in bootloader no kitl and gsm.Can not boot os this only work in hermes cid unlocked device then sd card work...bat what i can do when device cid locked and can not connect in activsync and everytime when try to use hardspl v7 or any other after 100% message image corupted only solution is that pof create jumpspl pach that work from dos without activesync this can help me and many other i will donate with paypal if somebody can creat this that work in hermes......
............again harmes how to unbrick 2.03
Many people try to unbrick spl 2.03 stack in boot no gsm and kitl mode and can not boot os just led light when power up...can go in bootloader bat this is all!!!.
I speak with imei-check abaout this and they told me that can repair this and it will cost 60pounds+ Here is message from imei-check.co.uk to me Hello,
You must send the device to us. The cost is 60 GBP + 15 gbp postage fee to return it back to you (or 7 GBP if we send it back to a UK address). In the day we receive it, we fix it, and next working day we send it back to you.
If you want to go ahead, please send the device + battery
(i think just need to open temporaly cid unlock in spl and this will help i mean from dos prompt,blank screen+ then flash??)and i must sent from Europe Union country .I live in Serbia and think that solution to unbrick hermes existed bat not want to tell many people......?? I will work in this now and i hope that solution will be for free when fix this.. I unbrick many hermes.artemis...etc..in Serbia bat this solution to unbrick hermes with spl 2.03 temporaly can not not have time to try?. I now will try many solution and will post here when fix this,you can trust me??....
If somebody else create solution before me please sent me message to know??
Do not post any solution from this site i try all and not work(SD card will not work when cid locked,hard spl-not work always 100% then message image corrupted,No kitl.....so please only original solution not from xda-developers..etc.
thanks for all.
Pozdrav zemljacima iz Srbije.
Pozdrav,
Ima nas prilicno sa SPL 2.03...
Igor
gsmhackerns said:
Many people try to unbrick spl 2.03 stack in boot no gsm and kitl mode and can not boot os just led light when power up...can go in bootloader bat this is all!!!.
I speak with imei-check abaout this and they told me that can repair this and it will cost 60pounds+ Here is message from imei-check.co.uk to me Hello,
You must send the device to us. The cost is 60 GBP + 15 gbp postage fee to return it back to you (or 7 GBP if we send it back to a UK address). In the day we receive it, we fix it, and next working day we send it back to you.
If you want to go ahead, please send the device + battery
(i think just need to open temporaly cid unlock in spl and this will help i mean from dos prompt,blank screen+ then flash??)and i must sent from Europe Union country .I live in Serbia and think that solution to unbrick hermes existed bat not want to tell many people......?? I will work in this now and i hope that solution will be for free when fix this.. I unbrick many hermes.artemis...etc..in Serbia bat this solution to unbrick hermes with spl 2.03 temporaly can not not have time to try?. I now will try many solution and will post here when fix this,you can trust me??....
....
Click to expand...
Click to collapse
Glad to hear that.
I am sure that the sulotion for spl 2.03 exists, but we don't know where to find it.
BTW, where is POF & olipro????
I made some progress, it stuck at OS screen now. It booted os several times today, it is strange that it can boot OS it is IPL 1.04 SPL 2.03. Stil NoGSM
koorosh_bsboys can you hermes boot OS?
Can NoGSM problem be solved with Flashing from SD Card?
igord said:
I made some progress, it stuck at OS screen now. It booted os several times today, it is strange that it can boot OS it is IPL 1.04 SPL 2.03. Stil NoGSM
koorosh_bsboys can you hermes boot OS?
Can NoGSM problem be solved with Flashing from SD Card?
Click to expand...
Click to collapse
My hermes can't boot into OS. It has stucked on 2nd splash screen (Imate telstra logo) not the OS logo!
How can u boot into OS?
If you find something new then share it with us.
My HERMES sometimes stuck at second boot scree and sometimes at windows screen, but few times it booted os. Than I put SSPL at microSD, becouse it stuck after few sec when it is on USB. OS is working ok - then I killed it again to SPL 2.03 and today get it back to working OS, No GSM.
What I did to get working OS???
1. Get battery out for about a day.
2. Put the battery in, DON'T POWER ON!!!
3. Do a HARD RESET.
If it don't work try several times.
Hi mighty POF
I saw you have posted something yesterday(after a long long time....).
So here is the problem that at least 20 of members on this forum have and their devices has been bricked without any solution.
HERMES
SPL : 2.03
IPL : 1.04
NO GSM ERROR
NO KITL (kitl disabled)
NO CID : Info 2 ---> (Request Timed out)
BOOT OS : NO
Cannot flash anything (ROM, RADIO, HARDSPL,...)
Trinity SPLXPLOIT can unlock wdata command
do u have any idea on how to unbrick the phones with this type of brick???
I Have read allot of data, unbrick tutorials and upgrades suggestions...
but I Still haven't found what is the correct upgrade stages.
As far as I have read from the unbrick suggestions, I've reached to the following order:
1) Upgrading SPL (Enabling KITL)
2) Unlocking
3) Upgrading radio
4) Upgrading Windows
Can someone confirm or recommend/add other steps ?
During the upgrade steps, will the HERMES be usable ?
Unlock first THEN hard spl.
DONT mess with your radio if it works fine, as this is part that can COMPLETELY brick your phone(you may be able to use as a PDA but not gonna be a phone EVER again.)
Load an os(either a stock one OR one of the cooked roms our TOP chefs cook up.), most come as OS only, no radio.
Hope this helps.... Cheers
It is useless for me, I cannot unlock the phone, due to different locking technique.
there are few posts about a locked Jasjam, with no olutions.
all the unlocking process went well, 3 times...
after the unlock process, when I insert the sim, it connects to the network, (indicated with 5 lines) and after about 5 seconds, it disconnect and says :
"The system detected an invalid SIM card"
and asks for unlock code.
now I have the following versions:
IPL 1.01
SPL 1.40.Olipro
Radio 1.16
any ideas ?
The Solution
To unlock Cellcom (Israel) JASJAM, As weird as it sounds, you should disable/deactivate/uninstall/whatever the EYRON Multi language support, which comes pre-installed.
I'll let the experts explain it.
I Dont know if it works for Orange-il Tytn too.
please consider note this in unlock guide ?
Now, which version of HARD-SPL with KITL should I Install... (Link will be helpful)
Please note that I Only Unlock the SIM, and not SuperCID, the .BAT file of the unlocker says:
"CID Unlock: will make your phone SuperCID forever, don't check this if you are unsure. HardSPL will do same effect without loosing warranty."
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
ultramag69 said:
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
Click to expand...
Click to collapse
I have upgraded to Olipro V7
When I Boot into bootloader, I see:
IPL-1.04
SPL-2.10.Olipro
But I Still not get any sign of KITL according to this threat (Step 5).
The Device is booting normally, as if I'm not holding any bottons.
How can I check if KITL enabled ?
Do I need KITL while using OLIPRO V7 ?
Orenk,
Have you read the Mr Vanx guides or the wiki? Here are the links:
http://www.mrvanx.org/cms/
http://wiki.xda-developers.com/
WB
IPL 1.04
SPL 1.40OLI
NO GSM
NO O/S
someone who can help me
Has been seen, many times. Search "No GSM error"...
See my IPL AND SPL i dont find any solution for this can same one help me
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
eclipsept said:
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
Click to expand...
Click to collapse
have you SuperCID your phone as of yet? Sounds like it is not unlocked.
Try that, and let me know if that makes a difference.
Cheers
It sounds like the radio rom is corrupted... If you can try to flash the ORIGINAL SHIPPED STOCK ROM on to your hermes... It MIGHT fix the "No GSM" error...
If this doesn't work then you won't be able to use the Hermes as a phone again but you can load other OS's on and use as a PDA....
mikendawn, Super CID WON'T work to repair the radio rom. You seem to think its the be all and end all solution... Unfortunately this isn't the case...
Loading Hard SPL V7 on is as good as Super CIDing your Hermes as all it does is allow you to put other carrier/cooked roms onto your Hermes and allow you to use them.
No, not quite that, I thought his phone wasn't SuperCID. I didn't think it was the end all solution. Just thought it sounded like his phone was CID Locked.
Cheers
here can find a original rom for my phone