Iqua BHS-701 Bluetooth Stereo Headset - Touch Cruise Accessories

Hello,
(my first post...)
Is the Iqua BHS-701 Bluetooth Stereo Headset compatible with TC?
Here are some links:
http://www.expansys.fr/p.aspx?i=148193&asource=160263
http://www.iqua.com/products_sub.php?id=1308&navi_id=1228
Thanks!

Welcome to the forum.
I don't know for sure, I don't have a BHS-701, but my guess is that it is very likely to be supported. These quotes from the Iqua web page (http://www.iqua.com/products_sub.php?navi_id=1228&id=1230) make me think this:
"The Iqua BHS-701 can be used with any brand of Bluetooth mobile phones that support the Headset or Handsfree profiles"
My comment - The Touch Cruise Supports both these profiles.
and "For stereo music, the device must support A2DP profile (Bluetooth stereo)"
My comment - The TC also supports A2DP (see page 166 of the TC manual).
This is no guarantee but these profiles are supposed to be standardised to enable interoperability like this so, as long as neither HTC nor Iqua have messed up on their implementations then in theory it should work. Personally I would still want to hear from someone who actually owns one though before spending my money or else make sure you buy it from somewhere that offers a good return/refund policy in case it doesn't work.
- Julian

Related

Parrot ck3000 carkit + bluetooth gps receiver

Has anyone succeeded in a combination of these two with the Blue Angel device ?
If so, is the audio from the gps software also routed to your car stereo ? What bluetooth protocol would support this ? The parrot carkit supports both the Bluetooth Headset and Handsfree profile.
I think in the end, this would be the best future proof solution : buy a standard pda mount for the Blue Angel and share the parrot carkit between all bluetooth devices present in the car.
Any comments would be welcome !
Kristof
Ok,
I did a little bit of bluetooth research : in order to have MP3 playback using bluetooth, the device must support the bluetooth A2DP (Advanced Audio Distribution profile) profile. The A2DP profile was included in BT 1.2 spec.
I've read the thread on the HP MP3 headphones, and there they have a patch that will install the A2DP profile, though I'm not certain whether it is a HP specific implementation.
Some other interesting threads on this subject :
http://forum.xda-developers.com/viewtopic.php?t=12549
http://forum.xda-developers.com/viewtopic.php?t=10747
http://forum.xda-developers.com/viewtopic.php?t=7679
So I expect that sooner or later there is going to be a firmware upgrade or bluetooth stack upgrade from Broadcomm that includes this profile.
The next step would be the parrot : for what I know, it does not support the A2DP profile. I asked their sales department if they have any future products / firmware upgrades that will support this profile.
So once you enter your car, you would have to enable 3 (!) bluetooth connections :
Bluetooth headset profile -> mobile phone handsfree communication
Bluetooth A2DP profile -> regular audio coming from the device
Bluetooth Serial profile -> connection to gps
With all the bluetooth instabilities with the current protocol stack, I wonder if these three at the same time would ever be realistic. Does bluetooth support this kind of bandwith anyways ?
I have a Orange M2000 with the Parrott CK3300 (it has built in bluetooth GPS)- The bluetooth handsfree works fine as long as you update the handsfree kit to the latest firmware. Also you have to pair as a Windows CE device for it to connect whenever you get in the car.
The bluetooth GPS does work but I find I usually have to do a soft-reset and then launch tom tom which then connects to the GPS without a problem.
You do loose the GPS connection when you make or recieve a phone call, I'm not sure if this is a limitation of the handsfree kit or the M2000 though, I've only had if for 2 weeks so I'm still experimenting with it!

Bluetooth in general and HF800 BT speaker in particular

Has anyone tried to pair and use the Motorola HF800 Bluetooth speaker together with the Wizard?
According to http://www.mobiletechreview.com/tips/Motorola_HF800.htm, the following functions, apart from being able to produce the audio output from the pda, are supported by the speaker: "voice dialing, redialing, putting a call on hold and call conferencing". Do these features work together with the Wizard?
Coming from fantastic SonyEricsson and Ipaq bluetooth environments, where I never had to worry about bluetooth functionality, I have realised that the MS Bluetooth stack isn't to be taken for granted...
If I have understood it correctly, the Qtek offers "Dial-up Networking", "Serial Port" and "Object push" as bluetooth services. Is there a limitiation regarding services, provided by other paired devices, that it can utilize (eg the above mentioned services provided by the Motorola speaker)?
Thanks in advance!
Bluetooth problems too!!!
Hi,
I am not sure about your problems with the Motorola headset...
All I can say is that i am very disappointed with the functioning of the Nokia Carkit ck7-w in combination with the Qtek 9100... I only have this carkit for about 6 months, and now it doesn't work with the Qtek 9100. Well, it works but there is a very annoying echo for the person on the other side of the line...
Appearantly nokia say that the carkit is only fully compatible with Nokia phones... So what's the thing with Bluetooth, i thought this was meant to be a universal system, so howcome it is still brand-specific...
Anyway, if anybody has a solution for Bluetooth communication with this carket, or the Motorola Headset it would be very welcome.
Re: Bluetooth problems too!!!
Maarten78 said:
Hi,
Anyway, if anybody has a solution for Bluetooth communication with this carket, or the Motorola Headset it would be very welcome.
Click to expand...
Click to collapse
Please do not "hijack" this thread. My questions were:
1.) Has anyone tried to pair and use the Motorola HF800 Bluetooth speaker together with the Wizard?
2.) If I have understood it correctly, the Qtek offers "Dial-up Networking", "Serial Port" and "Object push" as bluetooth services. Is there a limitiation regarding services, provided by other paired devices, that the Qtek is capable of utilizing (eg the above mentioned services provided by the Motorola speaker)?
Stepping on your toes
Sorry man, didn't mean to step on your toes!!!
As nobody replied to your item for over a month i decided to try and broaden the subject so maybe YOU and other users get helped in one go.
Obviously i see these items as related since they all deal with the bluetooth issues from Qtek....
Anyway, let's try to solve both 'problems' and wait for replies for other Forum users.
Ciao!

Bluetooth Carkit - also stereo music?

Is it possible to use a Bluetooth Carkit to play audio from the Vario in my car? If so, what should I look for in a carkit?
is this question so weird? I prefer not to buy something extra (like fm transmitter) for music.
It seems there aren't any yet. What you need is a car kit (and a PDA) that supports A2DP Bluetooth profile. I have not been able to find any references to such kit being available for sale anywhere. However, there is a car stereo from Pioneer that will support A2DP once released.
Take a look at this fairly comprehensive list of A2DP compliant devices - perhaps when someone develops the car kit you need, it will show up there.
Thanks. Now I know what to look for! I'll keep my eyes open.
mpd said:
It seems there aren't any yet. What you need is a car kit (and a PDA) that supports A2DP Bluetooth profile. I have not been able to find any references to such kit being available for sale anywhere. However, there is a car stereo from Pioneer that will support A2DP once released.
Take a look at this fairly comprehensive list of A2DP compliant devices - perhaps when someone develops the car kit you need, it will show up there.
Click to expand...
Click to collapse
Kenji776: if you can listen to calls over your bluetooth, have a go on my app VJVolubilis, using the -agon option.
It might work to open audio generally over the bluetooth connection, playing all sound out. Works on some devices, but not all.
V
i have a2dp in my car. I modified my HP bluetooth headphones and wired it directly to the aux input of my deck. I relocated the buttons to the front near the deck so now i have full control of the playback without touching or looking at my pda.
No this does NOT work with the wizard because i don't use it as my music player and i don't know if it supports a2dp profile but it works flawlessly with my hp rx3115. I also don't need a car holder for it because my pda just sits in my pocket or in the glove compartment. One feature i love about this is the fact that i can take out my rx3115 and control the music from 15ft outside the car.

Android as a2dp bluebooth receiver?

I know its possible to send audio from an Android phone via bluetooth to a PC using the a2dp profile. But I want to do it the other way. Connect the phone to my amplifier and send audio via bluetooth a2dp from my laptop.
I've searched but not found. Anyone know it it's possible?
I think the standard BlueZ stack can't do this. I think the Broadcom BTLA stack might be able to do this ... IF you have the Broadcom Bluetooth chip inside.
Hi Pananza,
did you have success to use an android device as a2dp receiver? I'm looking for a solution but I didn't find anything useful.
The only solution that I have found is to use the NDK to access the BlueZ stack, but I'm not sure if this is the right way.
Thanks
Paulo
Using phone as A2DP receiver
Hello
I would like to do this too, have a Sony MW600, and it works perfect with laptop or my HTC Desire, but it can not be charged and used at the same time..
Will it be possible to do this on an Android that is not rooted?
Did anything ever come of this? I'm looking for an app that would allow android to receive bluetooth a2dp or whatever the basic format is (mono ok), and output audio on the headphone jack of the phone. Bass ackwards to what all other apps i've found are doing. I've always been a "special needs" user
chulew said:
Did anything ever come of this? I'm looking for an app that would allow android to receive bluetooth a2dp or whatever the basic format is (mono ok), and output audio on the headphone jack of the phone. Bass ackwards to what all other apps i've found are doing. I've always been a "special needs" user
Click to expand...
Click to collapse
any update on this?
Wanting to use Android OS in the dash of my vehicle hooked to the audio system and use bluetooth a2dp to connect to mobile phones to play media through the system.
I'm looking for a similar setup. Has anyone found a way to turn android into an a2dp receiver?
wy1d said:
I'm looking for a similar setup. Has anyone found a way to turn android into an a2dp receiver?
Click to expand...
Click to collapse
+1
You can transform your device into a wifi music receiver with the app called soundwire, you must install a server on your pc to stream audio from your pc to your android device. I didn't find anything with bluetooth.
Sent from my GT-N8010 using XDA Premium HD app
wy1d said:
I'm looking for a similar setup. Has anyone found a way to turn android into an a2dp receiver?
Click to expand...
Click to collapse
Same here. More and more people are going to have "last years" android phone lying around doing nothing and this would be an awesome way to re-purpose it.
Whether it uses BT, Wifi, I don't care as long as I can stream audio from one android phone to another. What I don't want is to deal with DLNA or manufacturer built in BS. Just need google to turn on the A2DP sink profile and be done with it. The hardware is all there, just need the software to take advantage.
The next best thing is one of those BT reciever dongles/boxes. They run about $20 I think. So PSA to android developers - if you can enable this in a paid app I'm ready to buy it and I'll bet a lot of others are as well.
http://stackoverflow.com/questions/15557933/receive-audio-via-bluetooth-in-android
snuk182 said:
http://stackoverflow.com/questions/15557933/receive-audio-via-bluetooth-in-android
Click to expand...
Click to collapse
Did that tutorial works for you?
I've tried, but it doesn't work. My Panasonic TV doesn't see my phone, so I cannot play the TV audio thru my phone.
Any ideas?
Thanks!
I was also looking for an app like this.
For my old phones, my android sticks, ... no progress I assume ?
Waiting the same here! My idea is to buy a bluetooth transmitter, connect it to my TV and receive the audio on my phone.
I can't think that is not possible! :crying::crying:
Truck Tablet Install
Hey Everyone,
Been very curious about this as well as I'm going to do a nexus 7 install in my truck and want to be able to bluetooth additional music aside from what is on the tablet through the tablet to my speakers. Kind of a necessity due to the lack of a 3.5mm aux into the stereo. Hopefully we can figure this out!
n00b
?
I'm also looking to do this.
I'd like to be able to connect a Bluetooth transmitter to the output of a mixing desk, and then just use my phone to receive the audio (which I'd then want to save with something like tapeatalk).
This could provide a very quick method of recording gigs or DJ sets in stereo, and would be better quality than simply using the built in mic of your phone.
a2dp sink.
Bluetooth File transfer app can stream music from another phone. And this is where tha first phone works as a a2dp sink am I right? Can't we use that to built an app to follow it but using pc/laptop as the source?
Seems, that no one is interested. What a pitty, it could be really HOT stuff. For example, cheap android phone pluged instantly to a charger and to Car Audio via AUX, and You have got Bluetooth automatic pairing system for calling and music, navi etc.
Unfortunately I couldn't find solution for this, neither the app. It is strange. Some people says, that Android can not be a sink (reciever) in a2dp profile. So how does microphones from earphones are streaming audio to a phone, hmm?
Maybe someone will do it
I have a LG G3 and it does it flawlessly. It have a function called "Turn Audio Channel mode" on bluetooth settings.
I'm wondering how to do the same thing on any other andoird phones.

AOKP 4.2.2 - Bluetooth Pairing

Hi all. Has anyone tried to pair with a car?
I'm trying to pair with a Kia Sorento. It's looks like it pairs OK and then shows connected but the car doesn't acknowledge that it is connected.
I'll continue to test but wanted to know if anyone else had success. I'll try with other bluetooth devices as well. Please post your experiences with Bluetooth.
Thanks for the ROM update and thanks for your responses.
Well, I've successfully paired and used several different bluetooth devices. Didn't think I had this many:
- bluetooth mouse
- bluetooth keyboard with built-in trackpad
- OBD II reader
- Music headset
I have a phone headset and my car. It looks like both of these pair but don't connect properly. The headset is for phone profile only. After pairing, clicking on it does nothing. Doesn't even try to pair. For my car, it pairs and I'm able to enter the pass-phrase/key but then it doesn't connect.
It looks like there is an issue connecting to devices that use the phone profile. When looking at the settings for the paired items, there is a profile for phone audio. It has a checkbox which is not checked and is disabled...cannot check it.
I'll post screen captures when I get a chance.
Thank you
It looks like the HFP (hands free protocol) is needed for using a headset on a mobile phone as in the case of a earpiece or to use a car as a hands free for a mobile phone as well.
It looks like Blues does not support HFP. There is mention of an oFono project that works with Blues to support HFP but no mention of Android support. I also found some mention of Blues adding that support. Maybe it's available and needs to be configured. Didn't dig too far into it and I'm not that familiar with these technologies.
Hopefully, one of the devs can follow up on this or another group has done it or figured out how to do it.
I'll keep looking and will post if/when I find anything.
FYI, Bluez just released a new version April 12th.
I found some configuration files in /system/etc/Bluetooth
The audio.conf file has several settings referring to headset and hfp. I tried some variations but no luck. Good news is that it looks like Bluez supports headset and hfp out of the box/built-in.
More testing needed.
I also read that after changing settings you will have to unpair and repair your device to pick up the change.
I wonder what the stock files have?
It looks like, ideally, there are other profiles that should be there to have a good experience. PBAP, phone book access protocol, is needed for transferring contacts, for example.
it fix on next release, but have reboot afte call =(
zyr3x said:
it fix on next release, but have reboot afte call =(
Click to expand...
Click to collapse
So my reboot after a call is related to bluetooth headset. Right?
Any ideas about overcoming this?

Categories

Resources