I have a mogul and have been trying to update the ROM all day with no luck, and could really use some help
I have SPL-2-2.40.Olipro bootloader working ok.
I tried to flash the radio rom 3.27.00 first, but it got about half way and errored. It then had me do the battery removal, reboot procedure and restore which said it completed ok. I then tried the rom again, but now it only goes to 9% and then the mogul resets and i get error [328] invalid command.
I then was able to update the dcd 2.2 rom which completed ok, but now I get the yellow splash screen w/ sprint logo and the no radio message. I've tried loading the radio rom again numerous times from the bootloader, but it does the same thing resetting at 9% error 328
I've rebooted the PC, played with the cable connection which seems to be working as the bootloader will switch between serial and usb.
I also tried restoring to the 2.17 rom which I downloaded from the HTC site, but it only goes 1% and errors out with the same [328] Invalid Command
What can I do to get this working?
So are u sure you have the new unlocker
then flash the rom
and then radio
I think so the file is called "Hard-SPL-MFG" and I get the red, green, blue screen that reads:
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
I was able to get the dcd rom to go with no problems, but the radio rom will not go. Like I said it gets to 9% at which point the phone resets and I recieve the error 328 invalid command on the pc.
I saw some others here having the same problem, but wasn't able to find a clear resolution posted
thanks
I also just tried flashing the radio rom via sd card with no luck. I extracted and renamed the nbh file and copied it to the root of a freshly formatted (in FAT) sd card. Whne i start the boot loader I get the white screen and it says loading..... but then just returns to the red,green.blue screen. When i reboot I'm still getting the splash screen with no radio at the bottom
Put your phone in 2.40 bootloader (tri-color screen) and follow these instructions starting from step 4:
http://forum.ppcgeeks.com/showthread.php?t=17667
If that does not work, try it again from step 3.
mogul67 said:
I think so the file is called "Hard-SPL-MFG" and I get the red, green, blue screen that reads:
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
I was able to get the dcd rom to go with no problems, but the radio rom will not go. Like I said it gets to 9% at which point the phone resets and I recieve the error 328 invalid command on the pc.
I saw some others here having the same problem, but wasn't able to find a clear resolution posted
thanks
Click to expand...
Click to collapse
hard set your phone(2 soft keys and soft set botton)
and then load it into bootloader(power botton+camera botton) and then try to load the radio like that
bakntyme said:
Put your phone in 2.40 bootloader (tri-color screen) and follow these instructions starting from step 4:
http://forum.ppcgeeks.com/showthread.php?t=17667
If that does not work, try it again from step 3.
Click to expand...
Click to collapse
I've tried that but I can't get the relocker to run? It says no device connected would you like to try copying again? and I'm on the SPL boot screen its connected etc
I've also done the hard reset, gone back into the bootloader and tried the radio rom again, but it stops @ 9% with error 328 and resets the phone
mogul67 said:
I've tried that but I can't get the relocker to run? It says no device connected would you like to try copying again? and I'm on the SPL boot screen its connected etc
I've also done the hard reset, gone back into the bootloader and tried the radio rom again, but it stops @ 9% with error 328 and resets the phone
Click to expand...
Click to collapse
OK, did you try starting from step 4? That means just flashing the Sprint "leaked" ROM.
if I have Alltel should I still use the same method even though it says it's a Sprint rom?
I have the same issue right now
Thank you I was able to get the 3.16 ROM loaded.
next I ran the Hard SPL unlocker and got the bootloader screen, tried the radio rom install and its still quitting @ 9% resetting the phone?
I need to get the radio to work before installing dcd's rom right?
Ok don't worry, I had the exact same problem as you mogul67 and I was puling my hair out for a day and a half.
If you read kmartburrito's original PPCGeeks page:
http://forum.ppcgeeks.com/showthread.php?t=16806
The edit by ImCoKeMaN says:
I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card.
To do this there are 3 steps:
First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh
Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader.
Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy!
Click to expand...
Click to collapse
By "take the .exe" he means open the Radio ROM flasher with WinRAR, btw... I had to think about that one for a second just because it seemed so simple
So head over to best buy and get yourself a cheap MicroSD to SD adapter, throw it in your favorite card reader, follow the steps and you'll be up in no time
THank you for your help that did it, but I was able to just run the 3.16 ROM from Windows with no sd card. After loading that ROM I was able to run the unlocker, hard spl, and then update the ROM
thanks again
Related
I inherited this device from a moron. So Moron --> Moron i suppose.
I am trying to flash any rom. I just flashed Schaps 4.40. Works great. It flashed with spl 3.00 from olio.
When i intentionally put it in bootloader mode, it goes to SPL 2.03
When i try to flash a ROM, it runs SPL 1.09, then returns with error 260 ( I have rebooted and reconnected, still same issues).
I am running Vista 64 bit. I have no idea what is going on. I get the same herror when i try to run the Hardspl7 loader.
Any help or ideas are greatly appreciated.
try flashing through the microsd card, see wiki for instructions
i shoudnt have to do the workaround with the storage card, that doesnt fix the issue. Isnt there a way to get rid of my outdated bootloader 1.09? That seems to be the problem here.
how the hell would you even go from spl2.04 to 1.09?? are you even freaking sure your spl is 1.09 and its not just the sspl?
use the sd card method and install hardspl, with it, i just posted a howto in the hardspl thread. if you still dont think you have to use this "workaround" then by all means go ahead and start troubleshooting, error 260 is an open port error, search for it, the step you should take to troubleshoot are out there
I'm in the same boat, when I do flash the boot screen shows SPL1.09. If I manually enter boot screen it shows SPL2.03. It did this after I ran the olipro sim unlocker and tried to upgrade it back to hard SPL V7
stesul411 said:
I'm in the same boat, when I do flash the boot screen shows SPL1.09.
Click to expand...
Click to collapse
yes yes, everyone who is running the upgrade using the force spl is also having this "problem".....unfortunately, there is no known fix for this "problem" cause i dont think anyone really wants to fix it.
XtreMe_G said:
how the hell would you even go from spl2.04 to 1.09?? are you even freaking sure your spl is 1.09 and its not just the sspl?
use the sd card method and install hardspl, with it, i just posted a howto in the hardspl thread. if you still dont think you have to use this "workaround" then by all means go ahead and start troubleshooting, error 260 is an open port error, search for it, the step you should take to troubleshoot are out there
Click to expand...
Click to collapse
It never was 2.04, it is 2.03. And i followed your directions:
"ok, lets see if i get this right.
1. download hardspl v7 from the first post.
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done."
This did not work. extracted, renamed, extracted, ran sspl-herm.exe from the phone, and it goes to the spl-1.09.ds bootloader, and never changes to the other screen.
Why does no one want to fix this? How many others are experiencing this issue?
Thread has been renamed in order to classify the problem better.
http://forum.xda-developers.com/showthread.php?p=2055596#post2055596
Hi Folks,
I'm stuck in the tri-color screen for bootloader 1.06.
I have DCD 3.2.0 w/3.42.02 radio on the XV6800 and was trying to upgrade to radio 3.42.30. My system is Vista 32-bit.
I ran the Titan Relocker and it put SPL-1.06.0000 back onto the device and was planning on then putting 1.2 onto it.
Running titan_exitbl.exe says "Cannot open USB port. Please make sure, that USB connection in ActiveSync is disabled."
Unfortunately it is now stuck and even after ending the Sync Center service I can't get titan_exitbl.exe to pull it out of the Boot Loader.
Ideas? Thank you!
I could fire up an old XP laptop and try it from there.
Loaded ActiveSync 4.5 on an XP laptop, disabled USB connections, ran titan-exebl.exe and the device is booting now.
I'll continue on and see what else I can screw up.
Loaded SPL 1.20
Loaded 3.42.30
Loaded SPL 2.40
Device is back to working! Off to see if GPS is back after being lost with 3.42.02.
titan-exebl.exe
Where can I find titan-exebl.exe? Google doesn't turn up any results other than here?
titan_exitbl.exe
Never mind... just located it on my own hard drive!
Cheers!
Stuck on Bootloader
OK... I've tried titan_exitbl.exe, and it still doesn't work.
Here's my problem in chronological order:
1. I've been having a few problems (bugs) in my current custom ROM (PPC Kitchen 3.49 version), so I decided to re-flash to a stock ROM, see if the problems were fixed, and then try to flash back to a custom ROM.
2. I tried flashing to the Sprint 3.35 ROM. The RUU showed the progress bar on both my PC and the phone. But at 0%, I got a message saying "an error has occured" - or something to that effect.
3. I decided that the error was because I was running a custom ROM, and Sprint didn't like that. So I ran the Titan Relocker utility, thinking this would cure the problem.
4. I followed the steps on the screen and then got a message saying the relocker utility had completed successfully. The phone rebooted and went into the tri-color bootloader mode.
5. I retried the Sprint 3.35 ROM update, but got the same connection error, and the progress slider would never move from 0%.
6. I decided the phone had locked up and performed a reset with the stylus. The phone rebooted and went back into bootloader mode. The screen shows "TITA100 SPL-1.06.0000"
7. And that's as far as I've gotten. I've tried several hard resets using the buttons and the stylus together. I've tried removing the battery and reinstalliong... but the phone just goes back into bootloader mode.
I've tried both titan_exitbl.exe and UNI_Exitbootloader.exe, and neither utility seems to help. I get a message saying that "All data was sent... the phone will reboot now... please check your screen". The phone's screen blinks for a moment, and then returns to bootloader. Nothing can get it anywhere else.
I've tried different USB cables and ports. Activesync won't detect it, but the utility update software does.
When I run the Sprint 3.35 ROM update utility, I get an error at 11% saying "invalid vendor ID" and the update refuses to run. I tried to run the Titan Re-locker utility again, but it requires an ActiveSync connection. I've tried both enabling and disabling the USB connection in ActiveSync, but that seems to make no difference. The utility simply says no USB connection is available. The ROM update utilities will detect the device via USB - they just refuse to work with them.
I also tried running a DCD Tital 2.1.0 Bell ROM. The progress slider freezes at 0%, and then I get a message saying the RUU has encountered communication errors during the update. I've been through the recovery process the utiity suggests about a dozen times... it sill returns the phone to the bootloader screen.
So I'm getting pretty frustrated... does anyone have any ideas?
Try changing your spl back to 2.40.
Throwing it back into the tri color screen again and flash the sprint stock 3.35
But put it on the root of a fat32 formatted micro sd card in the flavor of under 2gb.
Just run the exe from your computer it will extract the files from the exe to some location on your computer, normally the ruu update folder.
There will be a ruu_sighned.nbh file locate it and copy it to the fat32 formatted card rename it TITAIMG.nbh
Let the phone boot into the bootloader and it should detect the file on the sd and update the rom for you, by stating loading ......
Then will prompt you to update press power key.
Sense you are not on sprint don't let the first time custimizations run ... pull battery once you get to your mobile today screen on first boot...
Use active sync or the sd method to update your rom to whatever you wanted originally.
Most full updates from carriers the ones that flash both the radio and rom will run regardless of the boot loader thats on the device.
Happy flashing
Just thought I'd toss in here that GPS does work, but I have to use GPS Viewer to get a lock on the satellites first.
softwind said:
OK... I've tried titan_exitbl.exe, and it still doesn't work.
Here's my problem in chronological order:
1. I've been having a few problems (bugs) in my current custom ROM (PPC Kitchen 3.49 version), so I decided to re-flash to a stock ROM, see if the problems were fixed, and then try to flash back to a custom ROM.
2. I tried flashing to the Sprint 3.35 ROM. The RUU showed the progress bar on both my PC and the phone. But at 0%, I got a message saying "an error has occured" - or something to that effect.
3. I decided that the error was because I was running a custom ROM, and Sprint didn't like that. So I ran the Titan Relocker utility, thinking this would cure the problem.
4. I followed the steps on the screen and then got a message saying the relocker utility had completed successfully. The phone rebooted and went into the tri-color bootloader mode.
5. I retried the Sprint 3.35 ROM update, but got the same connection error, and the progress slider would never move from 0%.
6. I decided the phone had locked up and performed a reset with the stylus. The phone rebooted and went back into bootloader mode. The screen shows "TITA100 SPL-1.06.0000"
7. And that's as far as I've gotten. I've tried several hard resets using the buttons and the stylus together. I've tried removing the battery and reinstalliong... but the phone just goes back into bootloader mode.
I've tried both titan_exitbl.exe and UNI_Exitbootloader.exe, and neither utility seems to help. I get a message saying that "All data was sent... the phone will reboot now... please check your screen". The phone's screen blinks for a moment, and then returns to bootloader. Nothing can get it anywhere else.
I've tried different USB cables and ports. Activesync won't detect it, but the utility update software does.
When I run the Sprint 3.35 ROM update utility, I get an error at 11% saying "invalid vendor ID" and the update refuses to run. I tried to run the Titan Re-locker utility again, but it requires an ActiveSync connection. I've tried both enabling and disabling the USB connection in ActiveSync, but that seems to make no difference. The utility simply says no USB connection is available. The ROM update utilities will detect the device via USB - they just refuse to work with them.
I also tried running a DCD Tital 2.1.0 Bell ROM. The progress slider freezes at 0%, and then I get a message saying the RUU has encountered communication errors during the update. I've been through the recovery process the utiity suggests about a dozen times... it sill returns the phone to the bootloader screen.
So I'm getting pretty frustrated... does anyone have any ideas?
Click to expand...
Click to collapse
please i have this problem how to fix this?
Please state your exact problem and what you did to cause it. Including all versions of rom and radio and bootloader.
drewcam888 said:
Please state your exact problem and what you did to cause it. Including all versions of rom and radio and bootloader.
Click to expand...
Click to collapse
Thanks!!! Ok, i cant remember eactly what is the v radio but i think 3.35 or 3.42 i cant remember exactly it's one of these. the SPL 1.06 Locked i cant unlocked i cant use titan_exitbl.... the SD update doesnt work stuck on loading.., i cant update from pc stuck 0% then Recovery Error help me. I My phone is bricked? Sorry for my english....
Did you try to install 2.4 unlocker?
drewcam888 said:
Did you try to install 2.4 unlocker?
Click to expand...
Click to collapse
Yes, i try from SD and nothing stuck on loading... from windows with RUU nothing 0% stuck and then UPDATE ERROR[262] now i don't know to do
2.4 doesnt use sd and it is run from a .exe. Make sure you aren't trying 2.47. Are you sure you tried this?
drewcam888 said:
2.4 doesnt use sd and it is run from a .exe. Make sure you aren't trying 2.47. Are you sure you tried this?
Click to expand...
Click to collapse
Ok, but how run from windows? If i cant connect via activesyncs the phone is on SPL mode i cant out of that and the msdos windows say "No device conected" when press enter from windows i cant unlock. Any idea? I'll try 2.47 but how run from windows with the phone en SPL Mode?
Please read. I said run 2.4 not 2.47. Put the phone in bootloader and it should say usb at the bottom. Then run 2.4 .exe unlocker. I think it should run without using activesync. And by spl mode do you mean the phone is in the bootloader.
drewcam888 said:
Please read. I said run 2.4 not 2.47. Put the phone in bootloader and it should say usb at the bottom. Then run 2.4 .exe unlocker. I think it should run without using activesync. And by spl mode do you mean the phone is in the bootloader.
Click to expand...
Click to collapse
Look i cant run Hard-SPL-MFG (Olipro 2.40 Unlocker) because when i run the Bat Or MSDOS Windows say "No device connect" question me if i want retray copy the file.
Ok so i guess it needs activesync. About your only option is to install a pregps rom so the phone will boot and then you can reflash the custom rom. Below is a pregps Verizon rom and radio that will work for 1.06 bootloader. Called rom 2.09.
http://forum.ppcgeeks.com/showpost.php?p=834294&postcount=4
drewcam888 said:
Ok so i guess it needs activesync. About your only option is to install a pregps rom so the phone will boot and then you can reflash the custom rom. Below is a pregps Verizon rom and radio that will work for 1.06 bootloader. Called rom 2.09.
http://forum.ppcgeeks.com/showpost.php?p=834294&postcount=4
Click to expand...
Click to collapse
No luck, method A SD Card Loading.. then cheking... then show a number corner 00028002 and say down Not allowed.
Method B, via PC and RUU then ERROR INVALID VENDOR ID.
Any idea? Thanks bro.
I think my phone is bricked... noway load the rom... i've tried load bootloader unlocked via SD last option and nothing!! damn this is so
Just did the titan unlocker and now the p4000 is stuck in bootloader with these 2 lines:
TITA100
SPL-1.20.Olipro
i think i need some help
thanks in advance
Marc
edit:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe >>> would flashing this ROM and Radio save me or my titan?
orangeworx said:
edit:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe >>> would flashing this ROM and Radio save me or my titan?
Click to expand...
Click to collapse
yes..............
since i'm stuck in bootloader mode, how can i use the ruu update utility ?
i'm getting connectiong failed and only option is to exit utility
any ideas ?
if u are in bootloader connect the usb cable and the phone should say usb at the bottom, just open up the ruu update and it should work just fine
Error 264
update utility cannot connect to your pda
and it says USB on the bootloader screen
SPL is 1.20 olipro
take your SD card out if (with phone powered off) if u have an image on the SD card and retry
no SD card being used at the moment
edit: it seems now it is flashing...
let's say this does work, fact that i'm putting a sprint ROM on my telus phone is gonna be alright?
re-edit: crashed at 11% - invalid command error 290... RUU encountered a communication error
recovery
at 11%, titan reset and went back into bootloader mode, RUU crashed but gave option for recovery which was "successful"
retried the same RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe
and crashed again at 11%
i think i killed my phone
i can't seem to do anything, not the telus wm6.0 ruu nor the one stated earlier...
is there a way i can revert to my previous SPL 1.04 ?
really appreciate the help @ 5:35 AM
got my telus wm6 to run and then decided to up to olipro 2.40
now it won't got past second splash...
radio is 1.32, rom is dcd 3.2.5
now from my understanding of what i've been reading is that i need to revert to olipro 1.20 to be able to flash my radio
and i can't do that since i can't get activesync.
any ideas ?
Get a SD card. Go to WIKI and following reverting to Stock. Then start over on flashing. I have done as you did and fixed the phone.
your phone sounds jacked up, how long is it stalling at 11%, r u giving it decent enough time?
redownload the latest sprint rom from htc america here:
http://216.139.227.226/RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
let it run for at least 20 minutes before deciding it crashed...after 1st boot softreset before letting it run any customizations
Got a problem. I wanted to upgrade to new OzRom today so did normal tasks I did last 40 times.
get new rom and unpack it.
Rename image to LEOIMG.nbh and put it to root of SD card
perform mtty task 29
reboot, phone goes to bootloader then goes to normal grey screen it just says loading and that is it. It gets stuck there.
I had tried flashing via sspl, it sees the phone, screen on phone changes to black htc screen but loading bar sticks at 0%
I have HSPL 2.08 on the phone, I tried to re apply HSPL but it states error with usb connection. Can not upgrade radio from sd card or via sspl as well.
Did try previous rom that worked but it also does not want to load?
Any ideas?
Try flashing back to your original rom. Try that via sd card which should replace hspl back too your stock spl and then start the process from scratch.
mitty task 29 has a serious problem. you are not the only one. if ur hd2 is from tmobile. try T-Mobile_HD2_MR_Software_2.13.531.1. flash it just like the way you do. if doesnt work then copy it to sd card and flash it. . it'll return to its original stage.
pnjboyzz said:
mitty task 29 has a serious problem. you are not the only one. if ur hd2 is from tmobile. try T-Mobile_HD2_MR_Software_2.13.531.1. flash it just like the way you do. if doesnt work then copy it to sd card and flash it. . it'll return to its original stage.
Click to expand...
Click to collapse
It is odd that it did it now as I have not had any problems for last 8 months
Did not work!!
Update is that I managed to do the HSPL3 again over USB which I could not do before but I can not flash any roms.
Have you tried flash to ActiveSync????
Ok got it going again.
I hade my HSPL as 2.08.0000 and cotula signs all over it. Flashed again and it again went to the same one. However apparently .0000 means it is stock (no idea why stock rom did not want load). Flashed it again to HSPL2 and then upgrade to 3 fixed it.
alesscam said:
Have you tried flash to ActiveSync????
Click to expand...
Click to collapse
It would not help as I have done mtty before so no os on it.
no problem with mtty...
after mtty
you can press red botton for sofreset and press volume down for go to Bootloader
from bootloader you will see USB ,
this if your leo is connect to PC
Hi. I wanted to install Android on my HD2 but for that I need radio versions 2.08 - 2.12. And currently my radio version is 2.06 so I wanted to flash it to 2.10 or one of them between 2.08-2.12. For this I used Custom RUU. Everything went well untill it said installing, and it went to 4% and then suddenly my phone reboots and then on my computer it says "Error 270. The image file is corrupted. Please check your Update Utility."
Well what have I done wrong?
Nilee said:
Hi. I wanted to install Android on my HD2 but for that I need radio versions 2.08 - 2.12. And currently my radio version is 2.06 so I wanted to flash it to 2.10 or one of them between 2.08-2.12. For this I used Custom RUU. Everything went well untill it said installing, and it went to 4% and then suddenly my phone reboots and then on my computer it says "Error 270. The image file is corrupted. Please check your Update Utility."
Well what have I done wrong?
Click to expand...
Click to collapse
Did you have install HSPL on your device?
Yes I have installed HSPL. But if you have installed HSPL, is it then supposed to show "HSPL" somehere on the bootloader screen? Because on mine it doesn't.
But then that's weird because I did install HSPL and it even said succesfull. But still I get the same error when I try to flash the radio.
Go into bootloader by holding the VOL- (down) button, while pressing the End Call button to boot up your phone from being all the way turned off.
Check on your bootloader (tri-color) screen for the letters HSPL and the name Cotulla.
If these things are not present, then for some reason you don't have HSPL installed.
If this is the case, stay in bootloader, and re-run HSPL, and then check again in your bootloader to make sure you have HSPL, and then re-flash the custom_ruu
Chances are it just didn't take because your phone didn't have HSPL for whatever reason. You might want to re-download the radio ROM just to be sure you didn't get a corrupted/incomplete download.
Good luck
oops ignore plz
but what a shame that my pc even doesnt play with custom ruu.nothitng happen when i click.i have everything installed.
huggs said:
Go into bootloader by holding the VOL- (down) button, while pressing the End Call button to boot up your phone from being all the way turned off.
Check on your bootloader (tri-color) screen for the letters HSPL and the name Cotulla.
If these things are not present, then for some reason you don't have HSPL installed.
If this is the case, stay in bootloader, and re-run HSPL, and then check again in your bootloader to make sure you have HSPL, and then re-flash the custom_ruu
Chances are it just didn't take because your phone didn't have HSPL for whatever reason. You might want to re-download the radio ROM just to be sure you didn't get a corrupted/incomplete download.
Good luck
Click to expand...
Click to collapse
Ok, then my HSPL isn't installed. But that's real' weird. Because when I install HSPL everything goes okay and it even says "Succesful" etc. I've tried to install HSPL for like 4 times and it always says installation completed, but however it doesn't show anything like HSPL or Cotulla on the bootloader screen. And I do have SPL 1.42.0000, which is required to install HSPL. And I also disabled my anti-virus so what have I done wrong?
By the way: When I go to bootloader mode it always goes to a grey screen first with blue words "Loading" and after a few seconds it says "Not allow" and after that it finally goes to bootloader mode. Is it supposed to be like that or what's wrong with this?
Nilee said:
But then that's weird because I did install HSPL and it even said succesfull. But still I get the same error when I try to flash the radio.
Click to expand...
Click to collapse
did you use hspl3 and not changing the dropdown from its default 2.08.0000 which is stock. run it again and make sure the dropdown ends .hspl
saurabh88 said:
but what a shame that my pc even doesnt play with custom ruu.nothitng happen when i click.i have everything installed.
Click to expand...
Click to collapse
anti virus program give you a hit when you first downloaded it?
many times the file gets disabled so you need to download it again, even if you turned off the av or told it to allow customruu.
also right click and "run as administrator" even if you are logged in as admin.
Nilee said:
By the way: When I go to bootloader mode it always goes to a grey screen first with blue words "Loading" and after a few seconds it says "Not allow" and after that it finally goes to bootloader mode. Is it supposed to be like that or what's wrong with this?
Click to expand...
Click to collapse
there's a leoimg on your sd card (or your phone thinks there is) but it isn't starting. remove the card.
Ok, well I used HSPL 2 and it installed correctly. HSPL 1 however didn't work for me. After I installed HSPL 2 it clearly said something like HSPL 2.08 on the bootloader screen. So I tried to flash to a new radio with CustomRUU. It all went well, untill it was installing and suddenly said: CONNECTION ERROR CRITICAL ERROR or something like that. It also said that the USB cradle or something was unconnected, however it was still connected and I didn't even touch it. After that my phone rebooted and went into bootloader mode again. The weird thing is that it doesn't say HSPL 2.08 anymore. Now t says SPL 1.42 again so the HSPL went away or something. I tried to reboot the phone (using the red button at the back of the phone) but it went into bootloader mode again. Well, all it does is go into bootloader mode. I can't even get to the normal thing again, only the bootloader mode. What the hell have I done wrong?
By the way: If I'm in bootloader mode all it says is this:
HX-BC
SPL-1.42.0000 XE <-- (before this it still had HSPL but now it went away)
MicroP-Wrong Platform (0x0)
MicroP(TOUCH) 0x30
Can anyone help me? Have I bricked my phone??
Just a question/suggestion,
Did you already thought to use/install the latest stock ROM 3.14 !?
the reason of this suggestion is this stock ROM have Radio 2.15.50 already integrated (no need of HSPL) and it's compatible with Android.
Well I didn't, I will try to do it. But I don't know how. Because my phone is still only able to get into bootloader mode. And it won't even charge it's battery..
So do I have to put the Stock ROM on my SD now, and flash it from the SD card?
I don't even know how much battery my phone still has..
Nilee said:
Well I didn't, I will try to do it. But I don't know how. Because my phone is still only able to get into bootloader mode. And it won't even charge it's battery..
So do I have to put the Custom ROM on my SD now, and flash it from the SD card?
I don't even know how much battery my phone still has..
Click to expand...
Click to collapse
You can flash stock ROM when you are in bootloader mode.
kurt-willems said:
You can flash stock ROM when you are in bootloader mode.
Click to expand...
Click to collapse
How?
By the way, my phone is in bootloader mode but it won't connect to the computer using a USB cable, it also won't charge it's battery.
Nilee said:
How?
By the way, my phone is in bootloader mode but it won't connect to the computer using a USB cable, it also won't charge it's battery.
Click to expand...
Click to collapse
Ok, then rest you the flashing over SD.
Make attention to use the right stock ROM; use your S/N to get access at your stock ROM on the HTC webpage.
deleted please ignore
Ok so I just extract the .exe and take the .nbh file of it and rename it to leoimg.nbh and put it on SD and start flashing?
Nilee said:
Ok so I just extract the .exe and take the .nbh file of it and rename it to leoimg.nbh and put it on SD and start flashing?
Click to expand...
Click to collapse
Yes; that"s it.