Related
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Me to.
I've been using Brodit mounts for the last couple of years but I keep swaping cars (between my own and a company one) recently.
This is the most promising one I've found so far.
http://www.arkon.com/pdamount.php
I like the look of this one because when I get a better case (flip type) there should be room to mount with it left in side.
Nice
Good range. Arkon only do a 'sucker' windshield mount for the jam/k-jam though.
Still looking.
Is there a UK site with them?
Any ideas when K-Jam accessories will appear? I want some screen protectors and don't like cutting bigger ones down to size.
Boxwave do some screen protectors and do ship to the UK.
http://www.boxwave.com/products/easyfinder/buy-best-i-mate-k-jam-accessories_734.htm
The Arkon kit CM910 has a vent, sticky Dash and suction cup mount included.
http://www.globalpositioningsystems.co.uk/arkon-universal-pda-mount-description.html
I think expansys do some Arkon Kit.
You might also want to look at
http://www.handnav.co.uk/product_details.php?id=126
http://www.globalpositioningsystems.co.uk/the-clip-company-vent-mount-description.html
Edit : I forgot to mention that Halfords do a expanding Phone Vent mount I think it's about £15.
Brodit is introducing a passive mount early this month (presumably 1st half).
Although I have not found any retailer selling it at the moment.
Cool I''ve been holding out for that one But I might get a cheap suction holder for the other cars I use.
I just bought a cheap HR Richter mini holder while I await a Brodit active holder.
Doesn't make sence for me to buy a passive holder now and an active holder in a while.
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
eayuwna said:
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Click to expand...
Click to collapse
Halfords has a universal holder for £14.99 that held my Vario very securely when I tried it in the shop and did not obscure the speakers or the USB port. It came with a window sucker and a sticky pad option. I'm not sure if there were clip or magnetic options as well.
Tesco have a universal holder for £4.97 that clips to the air vents. It was in a bubble pack and I could not tell whether it would open wide enough. But I don't suppose Tesco would object to a refund if it didn't, since there is no way to try before you buy.
Further to my post above I just bought a universal holder from a Vodafone shop for £5.00. It has air vent and sticky pad options and a slick/smooth adjustment operation - better than other units I tried for £10+. There is a gap at the bottom for headphones and USB charging if needed.
I don't like the idea of blowing hot air all over the back of the phone for hours in the middle of winter so I've plumped for the sticky option. I have yet to test it on the move with the Vario attached. I'll leave it overnight for the adhesive to stay stuck and then see how it goes.
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
q-biq said:
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
Click to expand...
Click to collapse
I've got one on my wizard and it looks great. I messed the first one up and i stuck the wrong side down on the screen and it gave an oil kind of effect on the screen, i'm sure the peel off sticker was on the wrong side, anyway i binned that and used one of the others i got and now it looks and fits great. had it on a few weeks now and its not scratched yet.
my last boxwave screen protector lasted over a year.
Hi all,
I have Brodit mounts available for the Mini (Wizard, Mini s) inc either a gooseneck mount or a brodit car specific pro clip.
Please feel free to visit www.dsldevelopments.co.uk for further details
Thanks, please PM me or email me if you have any questions or need any images,
Thanks
Dave
I've got this one and its fine!
http://cgi.ebay.co.uk/W-W-NEW-UNIVE...840540172QQcategoryZ10364QQrdZ1QQcmdZViewItem
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
This is the ONE! I jst got off the phone with www.proclipsusa.com, she is calling brodit to find out if it's in the shipment that's on it's way. I'll wait.
KJAM active mount
slewis1972 said:
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
Click to expand...
Click to collapse
No, the "base" only sticks out 3 or 4mm
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
galvinize said:
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
Click to expand...
Click to collapse
Got the same answer, more people email them then they'll know there's demand out there and get a move on.
brodit cradles available
cactusbob said:
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Click to expand...
Click to collapse
just found the new cradles available on the brodit site (512011 Active Holder, Tilt Swivel
With cigg-plug. and many others)
No info about price and delivery time yet
Nice spot, have emailed a few suppliers asking for price and dates.
Just Pre-Ordered Mine
Hi
Just ordered mine from DSL.
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond 2 T5353-Brodit-Holder.asp
Can't wait till it lands.
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
hotlips69 said:
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
Click to expand...
Click to collapse
Brodit holders come in two parts, a custom bit that holds the phone which is unique for each phone, and the proclip bit designed for your car. Where exactly on the dash it fits depends on which which car you have and which proclip you buy for your car. You're best off calling to find out, although most of them seem to have an option to fit over the central air vents.
Hi,
Any update??
I have preordered from mobilefun but still nothing.
Hi,
Got my cradle today from mobilefun. Just need a reliable navigation software.
Ordered mine from mobilefun yesterday, came this morning, fits great
cactusbob said:
Ordered mine from mobilefun yesterday, came this morning, fits great
Click to expand...
Click to collapse
What one did you get?, and did you get a in car charger with it?
I'm looking for one that attaches to the dash/air ventthat will also support a chrger.
Was looking at the Brodit one, and although they do look quite nice, £50+ for the holder and clip is a little steep in my mind.
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
cactusbob said:
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
Click to expand...
Click to collapse
Cheers - one last question - I see the tilt and swivel, but to the rotate though 90°, so the phone can be viewed horitontally (i.e. when using it as a Sat Nav)?
Yes the mount is in two parts, the bit that attached to the car and the bit that the phone goes in. The connection between the two is a swivel joint
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
mirmarmms said:
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
Click to expand...
Click to collapse
I have this item ordered from mobilefun.co.uk, they say 2 - 3 days and it'll be in stock, but I wouldn't be so sure about that.
This is the same type of car kit I used for my Diamond 1, and that one worked very well, so I don't mind waiting for this one.
Oh, expansys says they won't have this car kit in stock until June 23rd.. so, I'm prepared to be waiting anything up until then!
still not avaible CU S240...
received today from:
http://www.sv2i.com/search/fiche.asp?ref_produit=BT-CMS-HD2
http://www.sv2i.com/search/fiche.asp?ref_produit=PDA-3BHTD2F41
I have just bought the proclip and passive holder from dsl, then I bought a car charger from ebay, I will post what they are like as soon as they arrive, and if I'm clever enough to fit them in my car.
11/06/09
The cradle arrived today, it turned out that I actually ordered the wrong proclip, I intended to buy the one that bind to the right A/C vent of my (RHD) Corsa, but instead I ordered one that binds onto the bottom left of the dashboard. As it was though, I actually think the ordering error turned out for the better, the postion of the phone was still very readable, easily reachable, and it means that when I plug in the phone charger I won't see a wire dangling all the way across my dashboard, which would be unsightly as well as inconveineant. I would recommend this position of proclip for everyone, I know it seems strange that you need to look down at the phone, but when I took it out for a spin today it worked great.
Unsuprisingly, the cradle itself was fantastic way worth the extra money I paid for, the phone actually slips into position, I was sceptical at first about perfect fits, but the fit really was impeccable.
The fitting process was simple and straightforward (if I can do it anyone can) but requires a bit of brute force, but in my opinion that just came to show how sturdy the kit is. You know it's not going to go anywhere.
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
hello,
just need some opinions about car holders. first one CU S240 holder for topaz
http://www.handy-heaven.de/shop/images/b178412.jpg and second one is universal htc holder CU G100 http://www.1a-handyshop.de/images/artikel/HTC-CU-G100.jpg
which one prefer you guys? im still hesitating.
I wouldn't go for either. Brodit are the best. There is no fiddling with plugs with that, you just slide it in and it is charging....
Alternatively see here: http://forum.xda-developers.com/showthread.php?t=564493
i bought one like the one in first link with charger for about 10$ on ebay,
the handle (long part) broke immediately, so luckily the plastic that holds the phone itself is disconnectable and fits HR and i had HR handle from my old phone so the combination works but for itself its piece of crap.
too bad HR dont make holder for topaz - simple & rock solid - mine works for 2 years now with several phones.
about the universal ones i tried couple and its never perfect...
Look at brodit. Costly but the best available. The one for Diamond can be sued for Diamond 2
I just purchased this (spendy $59) one from ProClip...
http://www.proclipusa.com/brodit-device-holder/htc-touch-diamond-2-(gsm)/charging-holder-with-tilt-swivel-and-cigarette-lighter-adapter-512011-17511.aspx
It's on backorder now, but should be here within a week. I'll let you know how I like it.
[edit: It's by Brodit... didn't realize that.]
I was thinking of going for the CS240 as well, some site have it around £20
http://www.mobilefun.co.uk/htc-touch-diamond2-car-upgrade-kit-cu-s240-p18997.htm
Most HTC originals I have bought are great quality.
That said I also spotted these Herbert Richter, any tried them ?
http://www.handtec.co.uk/product.php/2417/herbert-richter-htc-touch-diamond-2-jacket-grip
I like the idea of multiple attachements, for the bike, car, etc...
Anyone bought and tried either of these, the Brodkit ones looks too bulky and over priced (to me).
The CS240 is great quality. It is actually made by Herbert Richter in Germany and the jacket grip of the second link you supplied is part of the CS240 set. So I think the set is the best bargain. It has a very good build quality. Nothing waggles during driving.
There is one drawback. The jacket grip may scratch the shiny surface of the battery cover, but if the TD2 is used without a case its probably scratched anyway.
I bought something that looks like your second link. And let me tell you, that was the cheapest piece of Chinese crap I have ever bought. The sides the open and close to grip the phone were getting jammed, the became loose and phone would fall. In two month it had been broken.
Nomas mis dos centabos.
I just bought this one
link not allowed
waiting for it to arrive ......
as new user not allowed yet to provide links
try the web for dealextreme dot com and look for sku 23237
Have you thought about the parrot branded car kits.
The blue tooth works really well and I have had for a long time and it never let me down.
I got mine from cleverkit.com
Which Car Adapter do you recommend guys for the Hero?
Ive seen these:
http://cgi.ebay.co.uk/WINDSCREEN-MO...ries_MobilePhoneBatteries?hash=item23038de0be
This looks a bit cheap
What about this one, looks half decent:
http://cgi.ebay.co.uk/AIO-PREMIUM-C...ries_MobilePhoneBatteries?hash=item23049b1982
Any other suggestions peeps?
I use a Brodit active mount. Looks good but is not cheap (about £30 ish in UK). But then I just slide the phone in and charging starts as soon as i switch on the ignition. I have used Brodits for my last 3 phones and all have worked well.
Cool you got a link for it, found it about £34.99 anywhere recommended?
Thanks dude
Got mine from prepaymania - it was £27.04 including delivery. Now it is £28.22.
They were fine, but got let down by the lying toads in the Royal Mail who insisted they had tried to deliver but I was out. The note saying that got delivered the next day by the postman! So had to collect it from my Royal Mail depot. But NOT Prepaymania's fault.
BTW I have mine hard wired in via a ciggy lighter behind the dash. Don't try wiring it in direct or you will fry your Hero because the ciggy lighter adaptor houses a voltage reducer. No wires show and I mount it using a car specific Brodit car mount as well.
Cheers dude. I don't want tyo drill in to the dahs, do they have a sticky thing that has to go on the dash as well? Or is there another way of doing it.
appreciate the link
Look at Brodit's site here. Click on "choose the mount for your vehicle" and put in the details. They do fittings for almost every car going and none of them involve any drilling.
You then need to find somebody who stocks them. Normally easy (prepaymania may) for more common cars. May have to wait a bit longer for unusual ones
Make sure you order one for RHD cars if in the UK!
I order the one on ebay but It broken after couple of twists. After a good glue it works perfectly!
I do not know if it affects th G2 battery life a lot but i use one of my blackberry phone chargers i think it's the one for the bold 9000
so far i didn't notice much change in battery life plus it chargers more than 70~90% of battery life in about 30-50 minutes.
just to add to my previous post. I have a silicon case on my Hero and that won't fit on standard car holder. My trick is to light it up so it warm up and expand it a bit and it fit perfectly!!
Ive bought one off ebay now, a herbert reicher one! I think thats what it is called!
Will see how i get on with it!
Funkyfin2000 said:
What about this one, looks half decent:
****link***
Any other suggestions peeps?
Click to expand...
Click to collapse
Avoid londonmagicstore on eBay.
I bought one of these holders and they sent me one that was meant to be a for a Nokia N97 and then insisted it would fit the Hero too despite the size difference. My N96 I had at the time fit so an N97 or Hero would just fall straight out lol. Sent back and got a refund luckily.
If anyone could recommend a car holder that would be suitable for running the Hero in landscape mode I would be grateful, the Brodit and Herbert Richter ones don't look to be secure enough.
I'm looking at one on Mobilefun that seems to be the correct version of the one from Funkyfin's eBay link.
A few days ago I bought an HTC car kit. Unfortunately as a new user here, I'm not yet allowed to post external links but the name of the kit is "CU-S210". Just google it and you should get a lot of results.
It says HTC on the box but if you look closely, it seems HTC buys from Herbert Richter (the flexible mount is labeled "HR" and on the cradle, there's a "made in germany" and I assume, it is HR as well since it looks exactly like the HR ones).
My opinion: I haven't gotten round to testing it on long trips but so far it works quite well. The phone is easy to get in and out but it still feels safely in place, even in landscape mode.
Well, if you drive a landrover through the rocky wilderness on a daily basis, I assume it wouldn't hold forever (however, then you probably wouldn't use a phone for navigation anyway ^^ ) but for regular street use I see no problems with landscape mode.
My brodit holder for the Hero works fine in landscape mode - in fact that is how I use it most of the time with my sat nav app. It has a ball mount so swivels easily and holds the Hero very securely