ok, these are the two versions that we have been playing with.
version 4_05_29446 (titan original) is camera 1
version 5_07_28987 (vouge original) is camera 2
no need to move any files to the windows folder like the earlier versions. these versions run within the folders they create (program files\camera1 and program files\camera2).
each version will have it's own icon in the programs list and each version can be set to a hard ware key.
bottom line.... now you can have both camera's installed on your device at the same time. just in case you dont know which one you want to keep.
Now we're talking. Nice work Cody. I'll install these since you made it easier.
thanks for the cabs....so i tried it, and well, i could see no difference. thanks though...anyone else see a difference?
ok ill ask the MILLION dollar question!
DO WE GET THE FLASH WITH THE TITAN original cam cab???
well wait 5min and ill answer my own question
Can these be made into updated OEM's for the cookers?
Thanks Codyppc
One thing you might want to add to your original post
-Program must be installed in internal memory.
I loaded camera 2 (Vogue), did a soft reset just in case, and then took two identical pictures without flash. (I used the same White balance for both - I think it was the halogen WB)
Can't tell much difference between the two... The pictures look pretty much identical.
Might try to test it with different settings. But if they do take similar pics I'll probably just stick with the Titan stock camera because of flash option.
Can you please make a general cab for us non Mogul and Titan owners?
spring777 said:
Can you please make a general cab for us non Mogul and Titan owners?
Click to expand...
Click to collapse
it is a general cab. should be able to install on all ppc's.
this doesn't remove the original camera. you will find the camera's in the program llist and be able to then assign it to a hardware button.
yes the flash works on the version 4_05_29446 (titan original) , camera 1
codyppc said:
it is a general cab. should be able to install on all ppc's.
this doesn't remove the original camera. you will find the camera's in the program llist and be able to then assign it to a hardware button.
yes the flash works on the version 4_05_29446 (titan original) , camera 1
Click to expand...
Click to collapse
it wont be compatible with all devices.
I tryed it on my i-760 and had to wipe my phone because it didn't work and wouldn't uninstall. The camera.exe wasn't a trusted program or something.
dimitri407 said:
I tryed it on my i-760 and had to wipe my phone because it didn't work and wouldn't uninstall. The camera.exe wasn't a trusted program or something.
Click to expand...
Click to collapse
Same issue I had with my T-Mobile Wing.
so what is the word for us samsung and other ppc owners who cant get it installed.
so no??????
dcd1182 said:
it wont be compatible with all devices.
Click to expand...
Click to collapse
For those (non titan people) who don't know dcd, the guy is a titan guru. So if he says its wont be compatible with all devices, you can believe it.
Sorry for the bad news.
hey this worked out great.. excellent CAB package. thank you.
i'm really disappointed at how badly the camera sucks on this phone. my daughters Moto Krazr is considerably better in all aspects - color, sharpness, everything..
so i installed camera2.cab.. soft reset. perfect.. i like the interface better than the stock camera. seems much less cluttered and easier to use.
i'll post my comparison pics below. (edited for size....image_10 and 11 is stock, image001 and 0002 is Camera2)
I don't know if i can tell TOO much difference.. still a D- in my book, either way. if anything, camera2 seems to take the hazyness away, and tends to represent colors a TAD better.
(and yes, the Candela flashlight WILL turn off, just before the shutter releases)
yes, there is no flash. but here is the interesting thing, if anyone can comment.
you CAN run have both of these cameras in your program folder no problem. launch 'Camera', then close, then launch 'Camera2'.. each work independent of themselves.
BUT - if i run regular stock 'camera', it actualy removes the flash completely.. in otherwords, the on screen icon for the flash is just simply gone. all other control buttons are there, and where they should be (Focus, brightness, etc.. ), but the FLASH button is gone...
so i was kinda disappointed in that.. i know Camera2 is not flash capable, but i would have liked to keep it on my device to take regular day shots, and still have the option of using camera1, IF i need a flash..
so i un-installed camera2, did a soft reset, and viola - flash button is back on 'camera'..
so all in all, stupendous work crafting this cab, and ensuring it didn't rape my system when i installed it.. equally smooth in the un-install.
not sure which one i'll go with in the long run.. but for now, i'll keep camera2 uninstalled.
great work
I was trying to get this to work my self...you got ahead of me...
Thanks...saved me a bunch of time wasting!!
Related
OK guys,
Thanks to all hose who Beta tested the Neon WM6.1 Rom for the NEON.
I have just released V1:
Based on feedback from Beta testers this is the change log:
V1:
* Fixed HSPDA - When connection is idle 3G icon shows up, but when you use the connection it switches to HSPDA.
* Pagepool changed to 8mb
* Removed Diamond Dialer
* Kaiser Tweak
* Diamond USB to PC
* Reg Hack Hide Sim Contacts
* Reg Hack disable security warning
Important note: This Rom has only been tested with Radio 1.58.25.17. If you experience problems with your current Radio and this Rom you can download the Radio from the link at the bottom of the post.
These guys deserve a big thanks, Shortyboy and jcostanza4
Links
Public Beta: No longer supported, please update to V1 or V2
Radio 1.58.25.17 http://rapidshare.com/files/121638802/RUU_NEON_Radio_1.58.25.17.rar
NEON V1 http://rapidshare.com/files/127032001/Neon_WM6_1_RV1.rar
Pictures
Reserved for Updates
can somebody post this radio?
disflipissofresh said:
can somebody post this radio?
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/showthread.php?t=395384
freeze after flash
flash my one today and it freeze after loading into OS. You can't do anything except it need to soft reset and it start all over again. Have to flash it back to telstra ROM update.
avast detect trojan
could you give a quick scan with avast antivirus as this detect trojan when try to download
great !
did u have a link for the dialer !
Thx ?
i have an artemis !
Post #1 updated with new Rom.
thanks!
This worked perfectly with my Telstra HTC Touch dual (Neon) device.
For any other newbies like me, this is all I did-
Took my brand new Telstra Australia Touch Dual.
Installed the Neon Hard-spl here-
http://forum.xda-developers.com/showthread.php?t=377260&highlight=neon
Then just installed the rom in this thread. It works great, though i've lost my Office Mobile apps.
I had no sound at all on the first boot, but after reboot (and it does tell you to reboot again) everything was fine.
Thanks! And I look forward to trying your future releases.
woops one issue
An update on my install, I did actually end up having issues where as soon as a call was made or received all sound stopped working (which obviously makes calls a problem)
As per the original post, installing the updated Radio which took me from version .15 to .17 seems to have fixed this problem.
So are you saying that this ROM doesn't have
* video calling
* office apps
* or SOLITAIRE!?
Can they be installed afterwards or anything?
Cheers
jbng
Okay so I freaked a little when the camera stopped working and my guitar tuner wouldn't work, but it turned out I had to update the radio and that fixed both problems. It does seem to be smoother too.
Office apps are there, solitaire is there, but alas no video calling.
Can you get a third party app to do that, or will we have to re-flash the ROM if and when you add the 3G dialer?
I'm getting a bit sick of this hard reset rigmarole - although I am getting much more efficient at it!
Appreciate your work Seth - keep it up. BTW, the ROM update seems to have fixed my 'not waking up from standby' issues.
Cheers
jbng
You can use User Customization, works for me you only have to run it once after the hard reset and all you've configured will be setup. Maybe if Seth is really nice he will include it in his rom the next time so you don't have to run it manually. Check this thread: http://forum.xda-developers.com/showthread.php?t=366337&highlight=uc+junkies
jbngar said:
Okay so I freaked a little when the camera stopped working and my guitar tuner wouldn't work, but it turned out I had to update the radio and that fixed both problems. It does seem to be smoother too.
Office apps are there, solitaire is there, but alas no video calling.
Can you get a third party app to do that, or will we have to re-flash the ROM if and when you add the 3G dialer?
I'm getting a bit sick of this hard reset rigmarole - although I am getting much more efficient at it!
Appreciate your work Seth - keep it up. BTW, the ROM update seems to have fixed my 'not waking up from standby' issues.
Cheers
jbng
Click to expand...
Click to collapse
I'll try to make a cab for Video call now that i have figured out how to fix it.
You can always try my new Rom it has video dialing built in.
http://forum.xda-developers.com/showthread.php?t=403436
Thanks for all your work Seth
The ROM is working great - no lockups at all since installing it.
I seem to have conflicting information about Bluetooth being affected by radio ROMs - what's your opinion? The reason I ask is that my bluetooth range is pretty shocking (it won't even go through one thin wall in the next room) and I was thinking that maybe one of the newer radio roms might improve it.
Will the Niki roms on the radio page work in a Neon? Should 1.65x radios work with your ROMs? The 1.65s there seem to be from a Kaiser.
The other thing I've seen is a HTC-supplied 'bluetooth hotfix' for the TytnII - any opinion on that?
We'll hang out for your video calling CAB/ROM too. Not that I ever really video call, but if someone asks 'can you do video calling?' I want to be able to say that I can... ;-b
Actually that's a thing - if someone video calls ME, will I be able to answer with the current ROM?
Cheers mate
jbng
jbngar said:
Thanks for all your work Seth
The ROM is working great - no lockups at all since installing it.
I seem to have conflicting information about Bluetooth being affected by radio ROMs - what's your opinion? The reason I ask is that my bluetooth range is pretty shocking (it won't even go through one thin wall in the next room) and I was thinking that maybe one of the newer radio roms might improve it.
Will the Niki roms on the radio page work in a Neon? Should 1.65x radios work with your ROMs? The 1.65s there seem to be from a Kaiser.
The other thing I've seen is a HTC-supplied 'bluetooth hotfix' for the TytnII - any opinion on that?
We'll hang out for your video calling CAB/ROM too. Not that I ever really video call, but if someone asks 'can you do video calling?' I want to be able to say that I can... ;-b
Actually that's a thing - if someone video calls ME, will I be able to answer with the current ROM?
Cheers mate
jbng
Click to expand...
Click to collapse
See post 1 for the new Video Dialer.
In regards to the radios have a read here: http://forum.xda-developers.com/showthread.php?t=369502
I haven´t had much time to play with Radios. I´m using the radio of my post and my bluetooth is fine. The range is excellent, i live on the second floor and i still can get my cars bluetooth out the back in the carpark.
Hey Seth
VIDEO DIALER: didn't work. At all. I installed the cab, soft reset and had no phone dialer whatsoever. I don't mind reflashing the rom if that's what needs to be done - is the rom file on the front page updated with the video dialer? Or if the cab doesn't work will the rom not work too?
RADIO ROMS: it seems that the one you list is the best and latest for the Neon. The Niki ones and the Kaiser ones simply won't load. It's largely irrelevant anyway - because I don't think it's the phones problem...
BLUETOOTH: I faffed around for ages last night doing some tests with my dual and my decrepit old o2 mini (which used to have great bluetooth range) and it seems that the problem may be with the transmit power on my *computer* rather than on the dual. I left my dual next to my laptop at one end of the house, and then went to the other end of the house and did a search with the o2 mini. it found the dual but NOT the computer. I swapped phones and searched with the dual from the other end of the house and the same thing happened. So the phones have good range to each other, but they're both having trouble finding the computer.
I'm just waiting to get my hands on another laptop with bluetooth and then I can see if I need to call the good folk at Dell to replace my bluetooth module perhaps.
I'm also wondering if the laptop has gotten into its head that it's a 1m device instead of a 10m device. It's strange that I've only noticed it since getting my new phone, and now the old phone seems to have limited range too.
Anyways, blah blah blah - please let me know if you get any further with the video dialling in either the rom or the cab - and/or if there's anything you'd like me to test out for you.
Cheers
jbng
jbngar said:
Hey Seth
VIDEO DIALER: didn't work. At all. I installed the cab, soft reset and had no phone dialer whatsoever. I don't mind reflashing the rom if that's what needs to be done - is the rom file on the front page updated with the video dialer? Or if the cab doesn't work will the rom not work too?
RADIO ROMS: it seems that the one you list is the best and latest for the Neon. The Niki ones and the Kaiser ones simply won't load. It's largely irrelevant anyway - because I don't think it's the phones problem...
BLUETOOTH: I faffed around for ages last night doing some tests with my dual and my decrepit old o2 mini (which used to have great bluetooth range) and it seems that the problem may be with the transmit power on my *computer* rather than on the dual. I left my dual next to my laptop at one end of the house, and then went to the other end of the house and did a search with the o2 mini. it found the dual but NOT the computer. I swapped phones and searched with the dual from the other end of the house and the same thing happened. So the phones have good range to each other, but they're both having trouble finding the computer.
I'm just waiting to get my hands on another laptop with bluetooth and then I can see if I need to call the good folk at Dell to replace my bluetooth module perhaps.
I'm also wondering if the laptop has gotten into its head that it's a 1m device instead of a 10m device. It's strange that I've only noticed it since getting my new phone, and now the old phone seems to have limited range too.
Anyways, blah blah blah - please let me know if you get any further with the video dialling in either the rom or the cab - and/or if there's anything you'd like me to test out for you.
Cheers
jbng
Click to expand...
Click to collapse
I will do two things tonight.
1 - I'll flash this Rom back on my device, i'm currently using SETHS DIAMOND V2 Build 19214.1.0.4. And i'll try to work out why the Cab doesn't work.
I'll rebuild this rom and include the video dialer if point one fails.
Cheers
Hey Seth
In the interests of 'giving something back' - here's a handful of splash screens for the diamond and the neon for you to take or leave...
Your 'logo' is supposed to be a square ROM chip but with griddle lines over it (you're a chef, after all). It also happens to be an 'S'.
If you want any further tweaks or raw files let me know.
Cheers
jbng
PS. While we're on the subject of splash screens, I get an 'access denied' error when I try to replace the windows mobile startup .png file on your latest Neon ROM. Any ideas why that would be the case? With the previous ROM my file just copied straight over the top.
jbngar said:
Hey Seth
In the interests of 'giving something back' - here's a handful of splash screens for the diamond and the neon for you to take or leave...
Your 'logo' is supposed to be a square ROM chip but with griddle lines over it (you're a chef, after all). It also happens to be an 'S'.
If you want any further tweaks or raw files let me know.
Cheers
jbng
PS. While we're on the subject of splash screens, I get an 'access denied' error when I try to replace the windows mobile startup .png file on your latest Neon ROM. Any ideas why that would be the case? With the previous ROM my file just copied straight over the top.
Click to expand...
Click to collapse
Hi jbng,
Thanks for the wonderful images. The only program i know that can overwrite system files is Total commander. Just copy the file to your storage card and then use total commander to overwrite.
If that doesn´t work i posting 4 cabs on my latest Neon Rom for who ever wants to use your great artwork.
Regarding the Video dialer i just realized that RV1 has video calling, only the public beta didn´t. Please update your rom to either V1 or V"2.
Thanks
hello everybody
I found a recent version VGA but I converted to QVGA, you certainly know this software, this version is unlike other tactile versions available to date
Admin edit: software removed after a complaint from the copyright owner, this software is not freeware or shareware and therefore considered warez, warez is not allowed on the forum.
Quentin Post:
I know, I know...I'm late to the party. Hopefully the quality of the release will make up for the tardiness. I'm still running a Kaiser (just couldn't convince myself the Diamond was actually better--and I'm still crossing my fingers that the Touch HD will get released with TMO 1700Mhz support).
Anyway, without further ado...this version of MusicID is based from the 1.3.16 source from 1800pocketpc.com which is of course released by AT&T. The changes are as follows:
Converted for QVGA (320x240) support. The conversion was done using image resources from the non-touch screen version so they look just fine. Furthermore all fonts have been converted as well. (I'd like to give credit to lepsyfou here, he did give everyone something to use at least even though the images looked poor and the fonts were large. Were it not for finding his original conversion that got me hooked on the app itself I probably never would have made my own conversion).
Removed UID information from query strings. For those that didn't check, the application for download on these forums (and other sites) actually makes all requests under the guise of someone's account (presumably whoever released the app). I won't post their account # here but suffice it to say that if they ever shut off the service everyone using that app would find it stops working. Hopefully that won't happen here.
Removed all AT&T specific features. This also means that all the buttons present after a successful identification have been removed. #1 they are completely useless for anyone not on the AT&T network; and #2 they were pretty much pointless (from my perspective) in the first place. As a side benefit see the next item.
Due to the removal of AT&T specific features I found it convenient to download a larger cover image photo for the album...maybe this will be enjoyed by others as well
Updated the help pages and removed redundant (or now unused) entries.
INSTALLATION INSTRUCTIONS
If you've never installed any version of MusicID before simply install the cab. If however you have installed a previous version pay close attention:
Remove any previously installed version of MusicID.
It is absolutely MANDATORY to remove the HKEY_LOCAL_MACHINE\Software\MusicID folder and its contents. If you're an advanced user and are using any of the conn* entries you can leave those but remove all others. If that last statement doesn't make any sense to you then simply remove the entire MusicID key (and all entries contained therein) prior to installation.
I highly recommend removing your \Application Data\MusicID folder and contents. This is due to the fact that the application now expects 150x* size images. The only issue with old images should be a slight off-center display though so it is up to you
Click to expand...
Click to collapse
enjoy
Update add VGA version
Update Shortcut fix QVGA
Update fix problème font QVGA
thanks and crédit are Quentin QVGA Fix
lepsyfou said:
hello everybody
I found a recent version VGA but I converted to QVGA, you certainly know this software, this version is unlike other tactile versions available to date
enjoy
Click to expand...
Click to collapse
Thanks for this. Been looking for an update since moving to the Diamond. Whats involved in migrating to QVGA? Is it an easy process? There are some other apps which would benefit from rework...Skyfire for one!
Cheers
Aidan
thanks for your work on this lepsyfou!!
wouldnt install. says installation unsuccessful because it is not digitally signed with...............
I have édit cab fr and eng: signature exe it"s good now installation functionnel
yes I will convert a fun software VGA>> QVGA so that everyone can benefit
Great soft thank bro
kwill said:
thanks for your work on this lepsyfou!!
wouldnt install. says installation unsuccessful because it is not digitally signed with...............
Click to expand...
Click to collapse
Look first post I have édit cab now it's signé
imfloflo: with pleasure my brother
thanks for fixing it so quick
ajout version VGA post 1
Is there anyway you could adjust the Text size? It still doesnt all completely fit on the screen.
Deff dont want to come odd as an ass. Just a thought to make the QVGA version even better.
Thank you
acardinale said:
Is there anyway you could adjust the Text size? It still doesnt all completely fit on the screen.
Deff dont want to come odd as an ass. Just a thought to make the QVGA version even better.
Click to expand...
Click to collapse
+1 on this... expecially on the manage id's tab... help me out tab needs some work too..
thanks on this, finally a finger friendly version of this app... great work!
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
molesaied88 said:
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
Click to expand...
Click to collapse
same here.... but i used Total Commander to copy the MusicID.exe file from the program folder to the Start Menu... and vola! it worked.... was able to place it in my program launcher using Manilla 2D....
i'm sure theres a much easier way.... but hey,.... it works..
hope this helps...
molesaied88 said:
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
Click to expand...
Click to collapse
no problèm shortcut AM MusicID start menu/ program
post1
very cool, I was using the old one with no touchscreen
Thank you.
the letters are cutoff a bit though also on the id screen
No biggie thanks again
Was reading about this last night on Pocketnow.com. tried to installed and got the unsuccessful message. Was in ATT store today looking at the new Samaung epix, just to see what it was about, would never give up my Tilt for it, but is nice and love the cursor, very responsive.
Now if you have a Tilt, not sure about other cells, or maybe if you have ATT device dial from you cell *43# and it should get it for you. Also might look in your start up might get put there.
I love this program. It actutally found a song from a Musical from 1951 while i have my Sirrus on Broadway. Unreal.
Hope this helps someone.
Beachboyde
Thanks for the good work!
Lepysfou, Great work, thanks for the qvga version
beachboyde said:
Now if you have a Tilt, not sure about other cells, or maybe if you have ATT device dial from you cell *43# and it should get it for you.
Click to expand...
Click to collapse
What do you get when you dial *43#? I have a tilt with att.
Thank you very much for this lepsyfou, worked a treat.
ps i love this tool.
showaco said:
Lepysfou, Great work, thanks for the qvga version
What do you get when you dial *43#? I have a tilt with att.
Click to expand...
Click to collapse
I am really not all that sure... It said success, and the attempted connecting to media net/internet. then a lot of nothing happened...
I have zero interest in Sprint Picture Mail. However, the account is sort of "hardwired" into the phone and there is no (official) way to disable it that I can find. It doesn't even show up in the list of accounts under Options in Pocket Outlook.
Does anybody know some sort of tweak to get rid of this account?
This would include...
1. Removing it from "send" options when emailing pictures (album)
2. Account chooser for Pocket Oulook
3. TF3D icon on the mail tab
thx1200 said:
I have zero interest in Sprint Picture Mail. However, the account is sort of "hardwired" into the phone and there is no (official) way to disable it that I can find. It doesn't even show up in the list of accounts under Options in Pocket Outlook.
Does anybody know some sort of tweak to get rid of this account?
This would include...
1. Removing it from "send" options when emailing pictures (album)
2. Account chooser for Pocket Oulook
3. TF3D icon on the mail tab
Click to expand...
Click to collapse
I believe its an extra cab that installs after a hard reset. Try hard resetting, and stopping the customization.
If there are any Sprint cabs you want they are floating around here or ppcgeeks.
sporklover said:
I believe its an extra cab that installs after a hard reset. Try hard resetting, and stopping the customization.
If there are any Sprint cabs you want they are floating around here or ppcgeeks.
Click to expand...
Click to collapse
Well, that's definitely a solution, but I'd rather not have to hard reset my device. I have the settings just the way I like it now.
Does anybody know how to get rid of it after it's already installed?
just stick a peice of black tape over the portion that says picturemail on your phone...
t0mmyr said:
just stick a peice of black tape over the portion that says picturemail on your phone...
Click to expand...
Click to collapse
Thank you for the incredibly constructive answer. You are my hero. Jerk.
thx1200 said:
I have zero interest in Sprint Picture Mail. However, the account is sort of "hardwired" into the phone and there is no (official) way to disable it that I can find. It doesn't even show up in the list of accounts under Options in Pocket Outlook.
Does anybody know some sort of tweak to get rid of this account?
This would include...
1. Removing it from "send" options when emailing pictures (album)
2. Account chooser for Pocket Oulook
3. TF3D icon on the mail tab
Click to expand...
Click to collapse
I'd love to know how to dump this as well without a hard reset and manually adding the all the other useful cabs myself.
Thanks for posing the question, now to wait for a good answer....
Try downloading the cab from somewhere, installing it, it will say the previous version has to be removed, after it removes the previous version, hit cancel to not install the new version.
Might be worth a shot, although I don't know why you wouldn't want picture mail, it's not like you have to use it, but why remove features?
clamknuckle said:
Try downloading the cab from somewhere, installing it, it will say the previous version has to be removed, after it removes the previous version, hit cancel to not install the new version.
Might be worth a shot, although I don't know why you wouldn't want picture mail, it's not like you have to use it, but why remove features?
Click to expand...
Click to collapse
That is a good idea. I'll have to try that!
As for why, good question. I don't really know why it bothers me so much. Maybe just because I like less clutter? Maybe it's an OCD type of thing. :-D One of the first things I did was install Advanced Config and remove the sprint music/tv tabs because i didn't want to use them, even though i didn't have to use them. :-D
clamknuckle said:
Try downloading the cab from somewhere, installing it, it will say the previous version has to be removed, after it removes the previous version, hit cancel to not install the new version.
Might be worth a shot, although I don't know why you wouldn't want picture mail, it's not like you have to use it, but why remove features?
Click to expand...
Click to collapse
I'm definitely going to try that! Good idea.
As for why, I don't like the extra account when I got from my text to email accounts BUT the main reason is because it works like POO POO! I hate how it is so damn clunky in it's operation and even though I don't use it to send picmail, if I get a picmail it goes in there.
I applaud Sprint for trying but damn, try a little harder next time. I could have done without this particular crap a$$ feature.
I'm also very interested in dumping Sprint Picture Mail. Since we're limited to six accounts in Pocket Outlook, its being there keeps me from adding in another account I actually use, so it's frustrating that they would add that in by default. Tried deleting all of the registry keys, installed files etc that are done as part of the CAB installer, but it's STILL there! Haven't been able to figure out how to bypass the customization step, otherwise I'd do a HR in a heartbeat and see if skipping the CAB install would work, so still awaiting a solution to this...
i tried but sprint mail was not completely removed , i even installed the other version and it got completely installed and i could not un install it using memaid ! there should be a smarter way toget rid of this sprint B/S.
i don't think it can be removed this way.
you will need to load a custom rom without the picmail.
in the time you have wasted waiting for an easy solution you could have flashed and reloaded all of your settings.
Not everybody wants a to use a cooked ROM. You know, it really gets tiring when know-it-alls pop into threads and instead of contributing something useful just say "you should have just done x,y,z instead of doing what you actually wanted to do." It's already been established earlier in the thread that hard resetting (which running a cooked ROM requires) is not an acceptible solution. I do not appear to be alone in wanting an alternative solution. If you don't have a solution or a constructive comment, can't you just, you know, not post anything?
maan76 - Thanks for trying that method out. I've been too busy to tinker. At some point, I'm going to try scouring the registry and DLLs in \Windows\. Pocket Office is extended just like any other MS app -- through DLLs. So unless Picture Mail has been hardwired through some bizarre method or bundled together with a load of other useful features into one big unremovable DLL, I have got to think that there must be some DLL somewhere that can be unregistered somehow -- it just hasn't been discovered yet. I hope anyway! But you never know...
lafester said:
i don't think it can be removed this way.
you will need to load a custom rom without the picmail.
in the time you have wasted waiting for an easy solution you could have flashed and reloaded all of your settings.
Click to expand...
Click to collapse
I echo thx2100 but will say the MAIN reasons I don't want to just run a cooked ROM right now is that the only real advantage at this time is they are light on the apps to free up ram. I come from the 6700 and 6800 and I'm in heaven with the speed and ease that the TP has when running multiple apps.
None of the new ROM's right now really dazzle me but if one comes around that is hot sh$# then I might run it.
With my stock ROM I have no surprises and only one really annoying feature which is the picmail but I can live with.
yep I totally agree thx 200,that there is no need for the cooked ROMs right now for the TP , why I am risking myself in a cooked ROM ?????????? to save RAM nop ! RAM is highhhhhhh and we have plenty of it in tp not like the mogul when the people were racing to build a ROM with higher free RAM after booting ! to save couple megabytes !, now with this strong hardware in TP , we have plenty of RAM .
the other reason which drove us before for flashing ROMs is the new applications (ex Manila for htc 6800 mogul ,u tube......etc) now we ve got the most updated versions of these software in the touch pro.
no logic reason for flashing ROMs at this moment , probably when new software will come up or super tweaks that require flashing ROMs , but definetely not now , we are still new and still learning about the Touch pro.I am seeing junior members building ROMs cause it is easy with this 288 MB RAM , I bet nobody was able to build ROMs for the Apache or the Mogul cause of the limited RAM.
we have a long way in improvement in touch pro before building ROMs.
thx1200 said:
maan76 - Thanks for trying that method out. I've been too busy to tinker. At some point, I'm going to try scouring the registry and DLLs in \Windows\. Pocket Office is extended just like any other MS app -- through DLLs. So unless Picture Mail has been hardwired through some bizarre method or bundled together with a load of other useful features into one big unremovable DLL, I have got to think that there must be some DLL somewhere that can be unregistered somehow -- it just hasn't been discovered yet. I hope anyway! But you never know...
Click to expand...
Click to collapse
Using MSCEInfo, I've been able to identify every registry change and file modification made by the Sprint PictureMail CAB and have undone them all to no effect. So, either some other routine is making changes related to PicMail or it's hardcoded into the ROM. Hopefully, it's not the latter...
Good luck and please let us know if you find out how to do it. I've pretty much given up and am just waiting to find a stripped down ROM for the Sprint Touch Pro that doesn't include PictureMail, Touch Guide Mobile or any of the other bloatware that Sprint decided we had to have.
Solution Removal Sprint Picture Mail
I found the solution this morning and I successfully removed the sprint picture mail and I also successfully added my yahoo mail
here what you need to do
1-install the sprint picture mail Cab
2-using resco file explorer or anything else go to windows folder
3-in resco explorer , unclick hide hidden files and unclick hilde file extensions
4-look for sprint picture mail cab , next to it you will find sprint picture mail.exe and some other files cary the same name.
5-this .exe is made by the second installation you just made not ROM related , but still you can not remove it ,for some reason.
so rename it into anything .exe , and do the same for the rest of the files including the cab , not delete them all you should be able to do so .
I did these steps exactly in that order and I opened the messages folder and I was soooo happy not seeing the picture mail account .
Good luck guys
maan76 said:
I found the solution this morning and I successfully removed the sprint picture mail and I also successfully added my yahoo mail
here what you need to do
1-install the sprint picture mail Cab
2-using resco file explorer or anything else go to windows folder
3-in resco explorer , unclick hide hidden files and unclick hilde file extensions
4-look for sprint picture mail cab , next to it you will find sprint picture mail.exe and some other files cary the same name.
5-this .exe is made by the second installation you just made not ROM related , but still you can not remove it ,for some reason.
so rename it into anything .exe , and do the same for the rest of the files including the cab , not delete them all you should be able to do so .
I did these steps exactly in that order and I opened the messages folder and I was soooo happy not seeing the picture mail account .
Good luck guys
Click to expand...
Click to collapse
I used Total Commander and removed the file and it worked.
Thank you very much! Now to test how picmails are recieved now.
mrrogers1 said:
I used Total Commander and removed the file and it worked.
Thank you very much! Now to test how picmails are recieved now.
Click to expand...
Click to collapse
Can you point out which specific cab you installed (was it just the one built into the TP ROM?) and which file(s) you removed to get this to work?
Also, can you confirm that this removed the Sprint PictureMail account from both the Outlook account list AND the Mail TF3D tab???
del4 said:
Can you point out which specific cab you installed (was it just the one built into the TP ROM?) and which file(s) you removed to get this to work?
Also, can you confirm that this removed the Sprint PictureMail account from both the Outlook account list AND the Mail TF3D tab???
Click to expand...
Click to collapse
Well I seem to have completely broke my ability to get picmail so I'll hold back on any instructions. I'll do some more testing and may just have to install the freakn program again.... OR I might load up a bare bones ROM and load cab's I see fit, 1 will undoubtedly NOT make the cut.
Scott’s VZW ROM - Working VZ Navigator (eRice kitchen v1.03.7) - Rev 1 out!
UPDATE 19 DEC 2008 @ 18:00 Central Time. New ROM is out. Consider this thread discontinued. Files will be on the website for historical purposes. I would recomend upgrading to my latest ROM here: http://forum.xda-developers.com/showthread.php?t=461524
UPDATED 12 Dec 2008 @ 19:00 Central Time
** You will need to dial *22899 after you flash to reprogram. Do this before anything else.
** Other model phones from other carriers will loose custom EPST settings per NexVision's testing.
REVISION 1 Changes at the end of this modified original post
This ROM IS FOR VZW USERS ONLY!
Greetings fellow VZW users. My first creation for us is Custom a ROM based off of eRice’s kitchen in this thread: http://forum.ppcgeeks.com/showthread.php?t=46965.
ROM Info:
**The ROM I created is nearly identical to the “STOCK” ROM with a couple minor additions and an upgrade to the core CE OS files to version 5.2.20931. I pulled all the apps and drivers from the leaked VZW ROM in this into the eRice kitchen from this post: http://forum.ppcgeeks.com/showthread.php?t=42741
**I stripped out the Sprint drivers and applications from the eRice kitchen and added the VZW drivers and Apps from the VZW leaked ROM. It was fairly seamless to do. I tested VZ Nav and it worked great!
** This ROM is considerably more smooth than the stock ROM and more responsive in most applications including Touch Flow. No, it doesn’t fix our missing memory problem but I dont think you will notice it as much now. What makes it great is it is based on the 20931 CE OS but retains the 100% stock look via proper drivers and applications.
**VZ Navigator runs well on this ROM!
As far as I know this is the first “Custom” ROM with any sort of GPS for the XV6850.
**********************
*Revision One Changes*
**********************
Added N2A Weather Patch to Autoinstall. INcludes most US cities and patched weather server.
Added Diamond TF3D Config to Autoinstall (Runs with no errors)
Added Nue Fonts with a few extra fonts than what the OEM normally has. They look great on this screen!
Added Advanced Config 3.3
Added Turn off SMS Sent Notification - cabbed by "mixtapeking1900"
Added DotNET CF 2.0 along side DotNet 3.5. DotNet 2.0 installs first then ver 3.5 via Autoinstall (CONFIG.TXT in extended package OEM for the kitchen users.) I bieleve either could be removed but not truly sure. DotNet 3.5 was needed for Advanced Config.*Note - Selecting dotNet 3.5 in the KITCHEN will cause problems! Dont do it unless you proplery modify config.txt to not load them in the AutoRUN.
Removed IE 6.1 (Breaks My Button Setup!)
Removed JetPrint Bluetooth printing (whatever it is called, not sure)
Fixed My Button Settings not launching from the Settings Tab in Manila
Fixed Voice Command> I added it back in. Go to "Settings -> Voice Command" to turn it on before it will RUN!
Kept HTC YouTube
Kept HTC Network Plug in
Kept Internet Sharing
*All Three of these are from the eRice Kitchen. Big thanks to eRice for all 3!
No other installed programs than those listed and the VZW OEM apps.
The ROM is now pretty close to Stock which was the goal. This should be the last revision unless someone finds a major bug.
AS always, please report bugs and any thing you like as well.
Files located at www.scottcrosler.com
Mad Thanks go out to eRice, Commenex and ImCoKeMan for making this possible! Without them none of this would exist!
UPDATED 12 Dec 2008 @ 19:00 Central Time
Basic Installtion Instructions
Download ROM and extract to desktopp (Now includes RUU). Start the ROM Upgrade Utility and follow instructions Flashes just like ANY other phone or ROM. Flashing will destroy ALL data on phone. Always sync with ActiveSync before starting the upgrade utility OR place your phone in bootloader mode (Power, VolDown, and reset)
A call to *228 or *22899 (automated activation line) WILL BE REQUIRED for normal usage! This is true of ALL ROM's and even a simple hard reset of the Verizon stock ROM.
Before you flash you MUST be unlocked. I do not support the unlock process or the software but I can tell if you that if you follow the instructions at the link it works perfect.
Link to unlocker is here: http://forum.ppcgeeks.com/showthread.php?t=42503
Link to ROM and RUU is here: http://www.scottcrosler.com/
Bugs so far:
Wiped Clean on new revision
**Here is where you will see gains with this ROM over stock...
1. Navigating through menu's, especially the settings menu.
2. Smoothness of TF3D (debateable depending on the tabs.) First time will be slow for EVERY device if you leave ALL the tabs enabled. Each tab is a like a sep app that has to load when you select it. After the tabs are loaded you will see even more gains over the stock ROM.
3. File explorer. Go to the Windows folder. No further explanation needed there, trust me. The stock file explorer took nearly 15 seconds to load Windows. This does it almost instantly.
Updated Kitchen Files!
This is for the eRICE KITCHEN. This is not my own Kitchen but an add on of VZW OEM files to the eRice kitchen.
Its the OEM pack that I used to create this ROM. Its what I stripped out of the VZW leaked ROM. I added just a couple OEMs that are not in the cooked ROM. I dont have the original OEM's broken out! IF anyone wants to break it down further like eRice did with his original kitchen let me know and I will host it on my site.
INSTRUCTIONS FOR KITCHEN SET UP:
Download and extract (to desktop) eRice 1.03.07 kitchen from here:
http://forum.ppcgeeks.com/showthread.php?t=42796
Delete the entire OEM folder from inside the kitchen!
Download and extract the VZW OEM folder from www.scottcrosler.com and place it in the eRice kitchen as to replace the one you just delted. I made one minor change to the pure VZW OEM folders.I dropped the phonecanvas XML provisioning file into OEM apps. i think it supposed to be in SYS but I dont know.... It works fine the way it is. If you have never heard of the file then ignore this part of the post.
Start RaphealKitchen.CMD and follow instructions.
***Do not select DotNET 3.5 in the kitchen!!!. It is enabled by default, delelect it. Will cause issues.
I will try to support the kitchen as much as possible. Please do not bother eRice with this hybrid kitchen as I am sure he will not support my hybrid creation.
Thank eRice for this kitchen.
Thank the original poster of this thread for the leaked ROM I worked with:
http://forum.ppcgeeks.com/showthread.php?t=42741. Not sure who posted it.
Thank me for putting it together!
I AM NOT TAKING CREDIT FOR ANY OF THE FILES. I do however take credit for converting to VZW OEM.
Should there be a link to your ROM here?
Are there instructions on how to flash?
Like putting phone into bootloader mode or anything else necessary?
Does the unlock process wipe the phone or does only the ROM update wipe?
Anyone tried this yet? Any reviews?
It's a lot of work to reinstall everything and to re-apply my special settings, even though I've been documenting what I've done.
Also, I was thinking of trying that Telus radio. Can I still try that on this? Does a radio update/change wipe the device clean or that's non-destructive?
lexluthor said:
Should there be a link to your ROM here?
Are there instructions on how to flash?
Like putting phone into bootloader mode or anything else necessary?
Does the unlock process wipe the phone or does only the ROM update wipe?
Click to expand...
Click to collapse
I updated the second post with the steps you need. Sorry was trying not to get flamed on my thread. Someone over at PPCGeeks flamed me for pretty much no reason other than the fact that they could. It only stopped me from releasing my ROM over there. Oh well. There loss. Too bad because there are some really good people over there. The eRice kitchen was perfect in every aspect of a ktichen. I was never so impressed. Impressed enouhg to download the leaked ROM and portover the VZW software ;c) Its a nice change over the stock CE OS. If you flash let me knwo what you think.
Hi Scott,
I've been lurking on both forums since I got my Titan last December. I have learned much from everyone here and over at PPCG: these are the best resources by far for those of us into our phones and the tech behind it.
I agree that you were treated less than "professionally" over at PPCG, and hope that you will continue to work on the VZW TP/XV6850. Thanks for this great use of Eric's kitchen tools and stock ROM, along with your knowledge on how to get them all working for us! My take from the eRice thread is that he has no issue whatsoever with you using his stuff, and in fact he welcomes it for us VZW stepchildren... hehe.
This ROM does indeed kick arse, and hopefully GC and others will figure out the PRI lockdown and we will all have an amazing little machine to play with: it is w/o a doubt a much slicker device than the Titan, and I dug that little unit for the better part of a year
Cheers Pal
digitalattic said:
This ROM does indeed kick arse, and hopefully GC and others will figure out the PRI lockdown and we will all have an amazing little machine to play with: it is w/o a doubt a much slicker device than the Titan, and I dug that little unit for the better part of a year
Cheers Pal
Click to expand...
Click to collapse
You've installed this ROM? Is the difference completely obvious?
digitalattic said:
Hi Scott,
I've been lurking on both forums since I got my Titan last December. I have learned much from everyone here and over at PPCG: these are the best resources by far for those of us into our phones and the tech behind it.
I agree that you were treated less than "professionally" over at PPCG, and hope that you will continue to work on the VZW TP/XV6850. Thanks for this great use of Eric's kitchen tools and stock ROM, along with your knowledge on how to get them all working for us! My take from the eRice thread is that he has no issue whatsoever with you using his stuff, and in fact he welcomes it for us VZW stepchildren... hehe.
This ROM does indeed kick arse, and hopefully GC and others will figure out the PRI lockdown and we will all have an amazing little machine to play with: it is w/o a doubt a much slicker device than the Titan, and I dug that little unit for the better part of a year
Cheers Pal
Click to expand...
Click to collapse
You know what Dude, that is all I needed for motivation! You verizon users have some serisou **** instore for you ;c) Thanks for the positive feedback! Im motivated again!
They will figure out the PRI crap. It will take time. I wish skywing would port over his adapter program. I could incormporate that and we would have 100% GPS just like everyone else. He stated in his thread he was not interested in doing so. Thats a huge loss for us that we never even had ;c(
For the record!
For the record:
I have always asked permission before I redistribute any item found here. I asked DCD for his kitchen when I posted my R4R ROM for the Titan's.
I asked eRice specifically if I could port his stuff over for VZW users. His response was:
"if you can get the sprint carrier files split from the rom/kitchen and include the vzw ones, more power to you. that's what this forum is about. sharing ideas and results and improving on them for the benefit of everyone."
Its posted here. Just for the record ;c)
http://forum.ppcgeeks.com/showpost.php?p=567803&postcount=56
lexluthor said:
Should there be a link to your ROM here?
Are there instructions on how to flash?
Like putting phone into bootloader mode or anything else necessary?
Does the unlock process wipe the phone or does only the ROM update wipe?
Anyone tried this yet? Any reviews?
It's a lot of work to reinstall everything and to re-apply my special settings, even though I've been documenting what I've done.
Also, I was thinking of trying that Telus radio. Can I still try that on this? Does a radio update/change wipe the device clean or that's non-destructive?
Click to expand...
Click to collapse
A few people have tried on PPCGeeks with great success as posted above.
Keep it coming. Two things to note. And YES I Just installed this ROM.
First, I had to *228 (not surprised but it is required to get data connections to work. This has been true for every ROM i've played with as well as custom ROM's i've built in the kitchen.)
Second, Comm Manager is missing from the slider menu with TF3D enabled. (Although still accessible via the keyboard shortcut.)
I will play some more and let you know what else I find. Thanks.
bkurek said:
Keep it coming. Two things to note. And YES I Just installed this ROM.
First, I had to *228 (not surprised but it is required to get data connections to work. This has been true for every ROM i've played with as well as custom ROM's i've built in the kitchen.)
Second, Comm Manager is missing from the slider menu with TF3D enabled. (Although still accessible via the keyboard shortcut.)
I will play some more and let you know what else I find. Thanks.
Click to expand...
Click to collapse
The comm manager TAB or the comm manager link in the settings Tab? Its just fine for me. There is no Comm manager TAB in VZW version of TF3D.
I see you use the PPC Kitchen. That does have the Comm Manager Tab and you are used to that. This version is stragiht ripped from the ROM. No changes AT ALL. The stock phone doesnt have COmm manager Tab.
How about responsiveness?
Launching VZ Nav opened Opera and downloaded the CAB. CAB launched got to privacy screen but complained about not being able to save privacy settings. Only option is to lick OK. You are then brough tto the "default" VZ NAV error screen telling you there was a problem with your GPS device. I do have the CAB for VZ NAV now however.
Re-Launching VZ NAV produces the same result. Unable to save privacy and crashes out.
My mistake. You're right. I've gone through so many ROM's that it's a blur. The "Communications" link is still under the "Settings" tab in TF3D as it should be.
So far responsiveness is good. I have not configured the settings for my "regular" business use however.
Perhaps the reason VZ NAV will not install is because it's the official signed version?
bkurek said:
My mistake. You're right. I've gone through so many ROM's that it's a blur. The "Communications" link is still under the "Settings" tab in TF3D as it should be.
So far responsiveness is good. I have not configured the settings for my "regular" business use however.
Perhaps the reason VZ NAV will not install is because it's the official signed version?
Click to expand...
Click to collapse
No, It always crashes twice at the initial set up, even on the Stock ROM. Its a crappy program I know! Try it a third time and you are good from then on. If not let me know and I will upload the Cab that I have. Nothing special about it though.
EDIT: I relfashed my phone, installed and it worked for me. It still does the three times to load problem. Two GPS errors for me. Then the third time it starts. THis is the EXACT behavior of the stock ROM.
bkurek,
How do you "go through so many roms"? Isn't it an hour or more to reinstall all of your apps and personal settings or is there some easier way that I'm missing?
I can't restore with SPB Backup, right?
Would you say this rom is noticeably faster?
lexluthor said:
bkurek,
How do you "go through so many roms"? Isn't it an hour or more to reinstall all of your apps and personal settings or is there some easier way that I'm missing?
I can't restore with SPB Backup, right?
Would you say this rom is noticeably faster?
Click to expand...
Click to collapse
You MAY be able to restore with SPB back up. MAY being the keyword. You can always try it. It wont hurt anything. Worse case scenraio; Hard reset.
I will let bkurek answer the respoinsiveness question. Anything from me woudl be purely biased ;c)
bkurek said:
My mistake. You're right. I've gone through so many ROM's that it's a blur. The "Communications" link is still under the "Settings" tab in TF3D as it should be.
So far responsiveness is good. I have not configured the settings for my "regular" business use however.
Perhaps the reason VZ NAV will not install is because it's the official signed version?
Click to expand...
Click to collapse
I relfashed my phone, installed and it worked for me. It still does the three times to load problem. Two errors that you just click though then the third time it starts. THis is the EXACT behavior of the stock ROM. It crashes twice on the Stock ROM as well.
Also did you install to storage card or main memory? I only install to main memory.
scrosler said:
You MAY be able to restore with SPB back up. MAY being the keyword. You can always try it. It wont hurt anything. Worse case scenraio; Hard reset.
Click to expand...
Click to collapse
That's true. Since it's basically the stock ROM, I might have a shot. I guess the one thing that might be a problem would be your IE6 update.
lexluthor said:
bkurek,
How do you "go through so many roms"? Isn't it an hour or more to reinstall all of your apps and personal settings or is there some easier way that I'm missing?
I can't restore with SPB Backup, right?
Would you say this rom is noticeably faster?
Click to expand...
Click to collapse
I go through them because I enjoy doing so and I'm looking for what *I* want. Yes it can be that long but I don't go through all the motions until I've found the right combination/foundation to build on. I did not for instance configure ALL of my email accounts or setup active synch in vista, etc etc
Yes it does feel very snappy but just like anything else you'll find it to be faster today and go back to *****ing about how slow it is tomorrow. It's a matter of perception in the end. You'll always want more. I'm actually more interested in a stable build than a faster one because I already know it'll never be as fast as I want it to be. I have experienced a myriad of stability issues that if I don't find a remedy for I will return this phone. They manifest mostly in the messaging components at this time. I have not had to soft reset a phone this much since 1990-something. Speaking of which, as a completely uninteresting side note, I have not posted to a forum since early 1990-something but the point is that I do like this device and would like to see it improved upon is why I am taking the time to post now. It’s a cool phone. Give it some time. Someone, somewhere will make it faster and more stable. I think.
scrosler said:
I relfashed my phone, installed and it worked for me. It still does the three times to load problem. Two errors that you just click though then the third time it starts. THis is the EXACT behavior of the stock ROM. It crashes twice on the Stock ROM as well.
Also did you install to storage card or main memory? I only install to main memory.
Click to expand...
Click to collapse
Interesting. My stock did not have this problem but it came pre-loaded with VZ NAV. Third time is the charm.
Program files and things I don't want to lose always go to main for me.
Massive thanks to jerpelea (wouldn't have gotten anywhere close without him).
I'm back! This new version is based on the fantastic Insomnia NIKI Kitchen, using WM6.5 Build 21500 and OEM Iolite/mishmash. As I made this version for my personal use, it is FULL of applications - if you don't like applications installed from the start, don't download it!
Warning: This ROM is for testing only and has been prepared by a complete cooking noob (me). I cannot guarantee any results for you or your phone and this may end up screwing things up COMPLETELY . Install at your own risk.
Having said that, it works very well on my NEON200 (Touch Dual 850), much better than any other ROM I have tried and even better than the old 6.1 version.
Make sure you have installed the Neon Hardspl (thanks Olipro) before you even remotely consider installing this.
Known Issues:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
- The camera hardware button does not work
- The camera autofocus doesn't work properly (messed up the some of the files I copied I think) so it takes a few seconds to shoot.
- Hardware keyboard doesn't work properly. It thinks that it is a 16key version.
Anyway, give it a go if you are game and let me know how it goes. It is a hundred times more finger friendly than the WM6.1 ROMs (which is the whole point of the touch phones).
I only do this in my *very* spare time, so I'm sorry in advance if I don't update often. I can say that I am very happy with the ROM as it is (never use the keyboard or camera), so it may be quite while before I update.
Download the new WM6.5 ROM here.
Old version (WM6.1 Build 21109) can be downloaded here if you want it for some reason.
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
ajb303 said:
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
Click to expand...
Click to collapse
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
maximus007 said:
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
Click to expand...
Click to collapse
I was just about to edit my post Keyboard does not work at any time. Also when recieving a voicemail, i tap and trys to connect. But says that phone call cannot be made at this time.
I've had no issues with voicemail...
Have you tried installing the latest Ezinput from the first post? Do you have 20-key device?
Perhapsthe Voicemailis something i need to set up with T-mobile.Yep, got the touch keyboard working with the install No keypad though.
Edit: Yes, camera button does not work.
I'm gonna load it up now and give it a shot.
I can't find the SIP task in task manager to kill it before installing the .cab.
Also can't get online because it is configured for Telestra (I imagine I can fix that easily). The "Setup Connection" app in settings closes immediately. That is how I used to setup my internet/phone provider stuffs.
Edits.
Ok...oddly enough after I updated my internet settings the 'task manager' and a few other apps showed up. That allowed me to kill the SIP and load the keyboard.
Overall this ROM is fast! Very happy with it so far. Can't wait till it is finished.
PS - I can't use my hardware keyboard either. Even with the SIP update. On screen works perfect.
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
I haven't found a packaged default ROM. You might wanna see if he releases one once he gets this build worked out. I would love to get a copy of your default rom before you upgrade it. I think I lost mine 2 laptops ago. Once you load the HardSPL you can go back, however you need the default ROM to do so. There isn't a backup / restore utility as far as I know.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
wait! haha, before you do can you dump your stock rom? That would be very useful
I'm new to this site. How do I get my ROM backup?
mafirst said:
I'm new to this site. How do I get my ROM backup?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2254400&postcount=7
Let me know if you need help with this.
Voice Mail (T-Mobile)
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
big papa rich said:
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
Click to expand...
Click to collapse
Interesting, I didn't know that. I thought it was just an issue I had to call t-mobile about. Thanks
SMS
I have een having issues with SMS. When I try to send a text, I get an error message saying that my message can not be sent, that I need to subscribe to the service. I flashed back to Seths V2 rom and every thing worked fine. Any ideas?
BTW, don't know if any one needs it, but here is a cab that works great for reconfiguring internet stuff for T-Mobile or AT&T
I Just found this link. Says it is for the Neon 200 US, but my device still says 300. Any how, looks exactly like the Ship Rom as I remember it.
http://forum.xda-developers.com/showthread.php?t=395384
maximus007 said:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
Click to expand...
Click to collapse
You can change it by editing:
1) Modelname.txt in OEM/OperatorPkg
2) nbhgen.txt in Tools/Htools
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
maximus007 said:
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
Click to expand...
Click to collapse
Change the name in modelname.txt in oem/operatorpkg
Also change mixupdate_oemversion_100.provxml in same folder.
os.nb.payload content will get overwritten when the ROM is built.
Thanks for mixupdate_oemversion_100.provxml - that has the version info in it (also edited easily via registry). It was missing from my kitchen.
modelname.txt simply has "Touch Dual" (which is OK) in it. That file doesn't let me change NIKI100 to NEON200.
If you check my .nbh in a hex editor it displays "NEON200", yet upon flashing it still displays the device as NIKI100...