Hello,
yesterday i was flashing a new rom to my prophet and for some reason i got a bluescreen while doing it. and the process stopped at 60%
after flashing again without problems i face some poblems.
sometimes it takes 1 or more softresets for the cell to find my network.
wlan ist not working at all. i can find a present network but when i try to log in i allways get the message network unaviable.
i tried to install the original o2 rom that came with my device but i have the same problems
just that it finds the wlan network and as soon as i enter the password the complete call hangs.
so now i have the shadow "my edition" 2 rom on my phone but i cant get it running it goes till "tap the screen to set up your Windows..." and then nothing happens anymore
i can not even get to the bootloader the phone just does not boot when i hold any button during boot. only thing working it hardreset but that does not change anything
before i tried to flash a new rom i was using the "my edition" 2 rom and everything was working fine but now after the crash it does not work anymore
i managed one time to get it running compleatly but wlan did show the same problems as under othe roms
could it really be that i damaged the hardware durning my abortet flash?
can anyone offer some help how to fix this?
IT seems unlikely that you have damaged the hardware, but it is possible.
Can you enter bootloader? If so, disable connect through USB in activesync, connect the device, and run a NVID AKU 2.2 WM5 ROM. See if the problems persist with this.
Related
My WiFi is not working when I turn it on. When I turn it on, it just do nothing. I tried to run WLAN Module Test to check the problem using Self Diagnostics, sometimes it can detect the MAC address, means OK, but sometimes it shows error saying "GetAdapterInfo() return FALSE....".
For your info, I already reflash the updated ROM (0426), but it seems not working. Now, I'm using ATOM EXEC ROM (0721).
Can someone please help me before I send my ATOM to repair center?
You sure this isn't after an ActiveSync session? My device often needs a soft reset after a session.
Yeahhh... I'm very very very sure about this! Eventhough I didn't use Activesync, the same problem still happened.
I tried to downgrade the ROM, the WiFi still not working!
I have the same problem as idzilhafis.
Tried to run Self Diagnostic and got the same two answers, sometimes the module is correctly detected and somtimes not.
When the module is detected during the test, also the Access Point name is detected (I have a wifi AP at home), but the connection doesn't work.
When I use Wireless Manager, the module is not alwais detected and sometimes also the wifi button disappears.
Of course I flashed and re-flashed the firmware, using the original manufacturer's latest ROM and the "not for sale" version. Nothing changes.
May be an hardware failure?
I think, I can answer myself.
Yesterday in the evening I did put the Atom in the fridge for a while, because i noticed that using the pda and then increasing its temperature, the module was never recognized.
Using the pda after an hour of fridge (I did put it in a little bag), the wifi module works like a charm. It is ok until it's temperature raise again, then the module hangs.
Such a behaviour is typical of an hardware fault.
I think that this kind of problem is surely not due to a wrong use, and should be covered by warranty. But I don't know where to send it for service (I'm in Italy).
Any idea?
I had tremendous problems with my O2 Atom WIFI which would not connect to my laptop WIFI LAN Network. I asked O2 Technical People & Lot of people on this and other forum but got no perfect response.
Practically trying many options I by chance put back the old ROM upgrade of O2 2006123-45 and tried switching on the WIFI and lo and behold it worked fine.
Then I reload the new ROM 20060426 again and it works fine.
This proves that if you reload the NEW Upgrade ROM more than once it locks the WIFI.
No, it proves that any ROM upgrade can result in strange things, and reflashing either the same ROM or another ROM can fix it. It's well known with stuff like battery use (some users have had their standby time doubled by just reflashing the same ROM).
I sent to o2 expert and he don't know what to do. Tried to change registry, still not working. Tried to reflash, stillnot working. I think hardware problem. Don't worry, I still got warranty!
Hi All, I'm a newbie.
Pls shows me where can I download this oldrom O2 Atom 2006123 (-45)?
Or Who can give it to me through email: [email protected] ?
Help me pls, tks a lot
Sorry for my english!
yesterday after flashing an dreturned original rom tim italian v.RUU_Nike_TIM_IT_1.31.408.09.
the device is starting without problem and installing operator setting.
in 2nd restart i setup any program (tom tom 7, tcmpc, opera mobile 9, spb time.) the divece is ok, after stand by i push the power button the phone display is off, the line's led is green.
we can help me?
or i call yhe support htc?
Mark the checkbox 'Advanced Network Connectivity' in USBtoPC somewhere in Start -> Options. I have the same Problem with another ROM.
If i uncheck the box my Device won't wake up from StandBy when Power Button is pressed.
But now i have always to uncheck the named option before sync with PC (ActiveSync). Waiting for solution.
Regard
the green led does it burn every time, you switch on? you cant switch off again?
connect it to your pc!
if your computer find a new device ... pleas try this drivers ... http://www.4shared.com/file/37767906/f3f2d803/MotoQ_QPST_Drivers.html
if you have in your hardware manager new "com" connection like "Qualcomm NMEA Diagport" your device is in the oemsbl!
If yes ... i tell you a way to reboot your phone!
hallo netrunner at tanks for your help.
when the device have the problem off shout down, activesync don't see.
tomorrow i haven't problem, the device is blocked at 1.00 pm, i have a soft reset in any time, the problem is off self only and in this moment it worked well
yesterday i flash with rom tim and radio rom 1.58.21.23.
the radio rom could he give the problem?
when start the problem today the device is in hsdpa
i powered off hsdpa the problem is cotinued
before i flash the 2 rom the device work very well.
does thing recommend me?
Ok all ok !!!!!!!!!!
1) I reflash the rom original tim
2) I flash the radio rom 1.58.16.27 (what there was already when I have bought in to device) with hard reset is OK!!!!!!!!!!! :
Tanks for all!!!!!!!!
your radio rom is crashed ... some times you can have this error! ^_^
Hi,
This is my problem, I have a X7501 running Windows Mobile 6.5 Cooked by MichyPrima. The current Rom I have is this; "Athena_SPL1.2_R1_CE_B21500_MiChY"
The problem with this version is that every time I do a soft reset, all or more of the programs that I installed get deleted and I have to reinstalled them again.
So, I decided to upgrade my pda to this version
"Athena_SPL3.5_R1_CE_B21500_MiChY"
In order to this I just simple need to flash the above file in my x7501 and here is when the problem starts,
I run the "RaphaelCustomRUU" that comes with the rom, I follow all the prompts and when the instalation start (0%) the pda auto-restart, the connection get lost and the installer simple stops.
I tried to install another version "28205_1_04RVGA" but happens exactly the same, I tried to update my Radio, and the same.
It looks like something is making my Pda to restart and doesn't allow the installation to continue. I also follow the steps from 1 to 10 of this file "AP4_How_To_1.8" to try to fix any problems with my device and nothing.
Battery is 100%
antivirus is off
PDA Sync perfectly
PDA works properly except when soft reset
Does any one has any idea why the auto restart is happening???
Thanks in advance
sovius
Hi I also have a similar problem:
I was running SPL3.5 & AP4 on an Athena X7500 previously but making a hash of the new/old roms to install, i flashed AP Touch by PK.
I am now unable to get into windows mobile's Today screen as the customisation process which runs config & AP Touch.tsk keeps resetting the device. Each attempt i flash (i tried multiple ROMs, ranging from AP Touch again, AP3newSPL, and AP4.0 again) results in an error asking me to check my USB connection to the device. I suspect its because i do not have enablerapi anymore inside the device. I am unable to install enablerapi into the device since it keeps resetting! deleting files from the startup folder to try stopping the customisation / reset process also didn't quite work, neither does it allow me to delete the AP Touch.tsk file inside the device.
Can anyone help??
Well, after a lot of research and luck I have finally resolved my problem.
and here is how I did it.
As you know my device every time I try to flash it from the computer, didn't response and simple cut the connection. I tried to flash it from the SD card and nothing, so.
1) look for the rom you want to flash, in my case was "Athena_SPL3.5_R1_CE_B21500_MiChY". Note; you can go from SPL 1.2 to 3.5 but for some reason I couldn't go from 3.5 to 1.2 or earliest.
2) I put my Athena in bootloader mode, by pressing camera + Comm Manager + reset
3) the colored screen appears saying on the white area (serial). why, I'm assuming my device was waiting for a serial connection or something
4) and here is the luck, I connect my USB cable to my device and the word serial changed to USB.
5) I activated the RaphaelCustomRUU.exe with the "Athena_SPL3.5_R1_CE_B21500_MiChY" rom inside and follow the prompts
6) the installation for the first time in more than 6 months finally start and satisfactorily was completed as well.
done
I'm checking if everything is okay, but so far, everything cool,
Hope this is helpful to those who face the same problem.
cheers
Sovius
Hi ,sorry noone saw your post but it would have been obvious what your problem was.
There is a way to downgrade to SPL 1.2 and it is in the stickies.
Just for reference if anyone finds this thread, you should have gone into bootloader to check your SPL and then made sure your ROM matched this.
The mismatch was the problem that caused the endless reboot.
regards lakeman
Thanks for your replay.
but I'd like to mention, that I was not trying to downgrade my SPL, in fact I was trying to Upgrade from 1.2 to 3.5. But that is not the issue.
My problem was that no matter what installer I used, after follow all prompts, the installation process freezed at 0%. Everytime I connected my PDA, everything looks alright until the installation process started and nothing always 0%.
So the solution was to put my PDA in bootload mode and only when the coloured screen appears, only at this point I connect my USB and double click the RaphaelCustomRUU.exe with the desired OS. My PDA instantly recognized the connection and did the installation.
Cheers
Bought a T mobile HD2 (unlocked) second hand with energy rom installed.
Got it home & I find that the wifi & bluetooth are not working.
It picks up the network signal fine & the data connection is working fine.
But the wifi turns on & will not pick up anything.
The bluetooth it seems does not discover & is not discoverable.
I suspected it may be somthing to do with the rom so I loaded up a stock T mobile rom with the same results.
I have updated the radio with the same results.
The phone has Hspl loaded & I am wondering if I could do a complete cleanout of everything including Hspl & reload a completly vanilla stock Rom would that help.
I have fiddled with all the settings for both wifi & bluetooth & still no results.
At this point I need help!!!!
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
johnerz said:
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
Click to expand...
Click to collapse
I've the same problem ...I suppose.
I used a Touch Pro in the last two years and Energy ROMs since September 2009. I never had problems with Wi-Fi an Bluetooth.
Recently I bought a HD2 and tried Bloutooth and Wi-Fi only after 1 week.
So, both the Touch Pro and the HD2 got the same ROM (Energy ROM) flashed , each by its own version, but two days ago I discovered WiFi not working (DISCOVERED, because I never tried it before)
The problem seems an extremely poor signal seen on the on screen meter, only if I'm close to the router (1-2 meters!) I couldn't establish a real connection, because the HD2 loss the signal every 30-40 seconds.
Bothered about this I tried with Touch Pro: the result is the same!
So I concluded: "It's the ROM!". Strange (never had problems with Energy ROMs) but possible. I flashed the stock ROM on the HD2: the issue remains. So I thought about the RADIO, and I flashed the RADIO 2.12.50.02 (compatible with ROM). The issue is still here.
I used Task 29 before another flash, then I tried an Artemis ROM with RADIO 2.12.50.02... nothing changed. (note that I tried almost every different settings about Wi-Fi,from BsB tostandard enhance settings)
Last (related?) issue: when I try a hard reset, the progress bar starts to "move" but after 3-4 seconds (about a third of the bar) the bar disappears and I got the "Press VolUp button" message. Then the phone has the first boot... but I wonder if the HR is complete, because it seems yes.
Finally I came to this thread and... another doubt: what about BT?
I tried both the Touch Pro and the HD2 Bluetooths but they can't connect or recognize each other (every "Find" and "Visible" options activated)
I didn't try yet with Touch Pro (flash etc.) but I am very bothered and dubious about it.
Cooked ROM Energy Leo 1 Aug
OS version 5.2.23673
Radio 2.12.50.02
Operatore: H3G ITA
For every other info needed to give help... ask!
THANKS FOR HELP or TIPS
WIFI & Bluetooth
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
flinx said:
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
Click to expand...
Click to collapse
Sorry I can't help about this.
We are alone in this thread!
wifi & bluetooth
I think your right.
Ah well, at least I have a very expensive doorstop!
You are not alone. I am experiencing the exact same problem and have yet to find an answer.
Task 29 didn't help and reflashing the radio the traditional way (even with the stock rom) doesn't seem to overwrite whatever is causing this problem.
Would uninstalling the hspl do anything? I am running out of ideas.
Hello all,
I encryptet my Z2 phone, after that it takes several minutes to get wifi to work on my phone. Sometimes it get´s connected but drops it right away. After several minutes it managed to keep it and works fine. will work until I reboot the phone again.
Anyone else seen this issue? stock kernel and so on with version: 17.1.1.A.0.402
Been thinking of getting a new firmware and rom, but hard to get everything setup with getting a new rom. Been reading about fastboot and so on, also my win 8.1 won´t find my phone when entering fastboot, seen a issue about that too. Think I atleast have root though
Anyway, this issue is wifi for the moment.