I know this is not supposed to be able to happen, but on two occasions today and since upgrading to new radio and DCD 3.0 my wifi has turned on and detected networks with the wifi switch set to off, not sure why this is happening and I can not duplicate it on demand, trying to turn on wifi with the switch of via comm manager still does not work. Trying to find some kind of pattern but it has only happened twice.
Perhaps with the new radio there is a way to turn it on and off via software, or perhaps my switch is malfuntioning.
I had a similar experience as well.
I noticed it when I soft reset (not all the time, but 1/10 maybe?) and when trying to activesync, it would sometimes turn on.
I wish there was a way to figure it out, this means that it should be possible turn on wifi via software doesn't it?
Now that you mention it one of the times it came on was right after a soft reset.
Yep, this is becoming a well known problem.....well, for me not a big problem, just a slight annoyance....in the new ROM/Radio. It must have something to do with the radio, because I never experienced this in any other ROM. I'm wondering if WLAN may be turning on when there are short lapses in carrier coverage, and when an app (like activesync....I sync my e-mail using outlook)is trying to be connected to data (the internet). I just turn it back off when it turns on by itself. It doesn't ever seem to turn OFF by itself when I'm actually using WLAN.
EDIT:
one thing that may support my theory is that when you do a soft reset, it takes a bit to connect to the carrier network, and this just happens to be one of the times that WLAN turns itself back on..
And yeah, the battery usage definately sucks....plus when WLAN is turned on, and you're not connected to an access point, you could have data throughput issues as it keeps trying to see if it can connect through WLAN and/or radio......
I need it fixed , I didn't catch it earlier and my battery lost 85% today wihtout me even using my phone. Normally I get 2 full days I haven't really used my phone today and was fully charged this morning now I am at 15%, very poor performance for my typical use.
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Same here, but has only happened a of of times.
louderjw said:
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Click to expand...
Click to collapse
It only appears to happen while in a call for me as well...it happened with no additional software installed at that point so I'm certain it has something to do with the rom itself...I'm guessing the new radio but who knows for sure...
shame here
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Except that I've never installed WiFiRouter...
I don't have WifiRouter either.
cdoggwsu said:
Except that I've never installed WiFiRouter...
Click to expand...
Click to collapse
And I hvae never had the problem. (and I do run wmwifirouter)
i saw this when the kitchen first came out as well. i also saw that it wanted to connect to a roaming alot more than it should as well.
sprint will tell you to set you phone roaming settings to "sprint only" the phones and ROMs come with "automatic" enabled.
my sprint buddy told me long ago to change this from auto to sprint only. soft reset. let it conect to a good sprint connection. then switch back to "auto" and soft reset.
i haven't did this for a year or so, but when i started seeing the roaming icon after many of the soft resets i thought about it. since i did this i haven't seen the roaming nor the wifi bug.
i think it is the theory that when you softreset the phone set on auto looks for the first tower, which could be a roaming tower. this takes a little too long to conect. in this longer than normal connection time when something like activesync wants to connect and has no internet connection it will enable wifi to connect if it has to.
i have noticed in the past with other ROM's as well that if your phone is in flight mode and you soft reset. as soon as activesync tries to connect and cant it will turn on wifi.
try this. turn on flight mode. soft reset. open active sync and hit sync. you'll see.
so for the record... this is not a dcd bug, but rather a windows mobile bug. wm 5 and 6. the best fix is to set it to sprint only or do the trick i stated above.
Are any of you running the HTC Home Plugin with the weather patch?
Because I installed it on my XV6800 and on a soft reset the WiFi was acting wacky. As if it was looking for a signal.
All I did to correct this issue was to disable automatic roam / download of the weather.
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
jjlwork said:
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
Click to expand...
Click to collapse
Did you have this issue with your Stock ROM?
I only ran the stock 3.35 rom for about a day but I seem to recall it happened then as well. I didn't think it was necessarily DCD's rom but was an issue with the new radio. I'll try the steps cody recommended and see if that does the trick.
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Nor have I.
I just switched to sprint only, and after a soft reset, the wifi did not turn on as usual.
[email protected]$ said:
Did you have this issue with your Stock ROM?
Click to expand...
Click to collapse
No I did not, however I also did not have it on there very long. I flash often, and I am constantly tweaking, "My name is jjlwork have a flashing problem" lo
Interestingly enough I am able to reproduce by following cody's instructions with the flight mode -> soft reset -> activesync
Related
Since I upped my radio to 1.4 I have had a problem with my WiFi not enabling. I am using ROMS cooked up in DCD's Kitchen 1.6.9 and 1.6.10 and am using the 10 Button Kaiser style CommManager. When I turn WiFi on it turns back off within a second or two. I am having the same problem in either ROM and I just re-flashed the Stock 2.09 Verizon ROM back in and although there is no WiFi button on the CommManager the WiFi status is saying off when I look at the advanced tab of the Wireless LAN settings.
I am reasonably sure this started when I went to Radio 1.4 as WiFi used to work for me. I have also gone up to and back down from the 2.13 radio and that does not seem to affect the issue. This confuses me because I read other threads where folks talk about WiFi in both of these radio versions.
Has anyone else seen symptoms such as this?
Thanks,
Ks.
have u tried soft set or hard set or updating the radio ?
Yep, the only radio I have not tried is 1.47 but others aparently have WiFi working with 1.4 and 2.13. I am thinking there must be something else, perhaps in the extROM, that is causing me problems since this problem seems to transcend Kitchen versions and the stadard VZW ROM.
Thanks,
Ks.
No prob.....
Are you sure the WiFi slide switch on the side is turned on? I am not able to ever use a software switch to enable/disable WiFi
whbell said:
Are you sure the WiFi slide switch on the side is turned on? I am not able to ever use a software switch to enable/disable WiFi
Click to expand...
Click to collapse
Oh boy
Thank you for pointing out the obvious to me and the symptoms certainly fit that diagnosis. As an ex-6700 user I absolutely forgot about that dang switch. All is working again.
I hate doing stupid things.
Ks.
I learn from experience like everyone. I came from the i730 and I still catch myself using a PhoneAlarm button on the today screen.
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to threads like TalynOne's The Titan Internal GPS FAQ (01/30/2008) located here...http://forum.xda-developers.com/showthread.php?t=363431
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
xweaponx said:
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to other GPS threads...
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
Click to expand...
Click to collapse
I flashed this ROM and I have since, jumped to DCDs version of it, and then back to 2.17.
I have, and apparently, a lot of folks have had inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
The odd thing is that I have loaded new ROMS (including the current Sprint OEM ROM) and I'm still having that problem. (I'm taking suggestions to resolve this)
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
On a kinda more positive note...
GPS worked well (when the EVDO connection did)
New Apps sucked up more of our previous RAM, but I didn't have any
latency or freeze ups.
I myself am experiencing a number of problems with the new ROM version, and will be downgrading to 2.17 soon. It took 3 installations of the new ROM to get the GPS to work. Since then, I've experienced several performance issues, including multiple times where the phone will freeze during web browsing in Opera Mobile. Sometimes, the phone won't even freeze, but will come up with a screen saying that the system memory is low, even when I'm only running Opera Mobile, it'll ask me to close either "Opera Mobile" "Phone" "Phone" or "Phone". Weird? I think so...
Also, there are times where I won't even get the internet to work. I'll have to either go in to the connections menu and disable the data connection, or do a soft reset of the phone completely.
In my opinion, it's probably more trouble than I really need to go through. I will be downgrading to 2.17 until the official release comes out.
Same issues for me:
inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
Spent 30 min with VZW level 2 support today. I called due to ##debug HDR an/aaa was = 0.. I was under the impression was supposed to be set to 1. They did look at my SSDR (I think he said that) and found it had a small issue with the authentication (still reads =0), but after he fixed that I still have issues. My HDR RDX power goes from -71db to -96db.
I also noticed every time I call the phone changes from EV to 1x. I know you don't use EV to make voice calls, but I did not remember (key word) seeing it switch like that before. Maybe someone with 2.17 1.40 radio can confirm.
I have thought about moving back too, but my call ticket history is getting pretty long with VZW and if I needed another A-key (yes I have one written down) it may start to look strange.
I'm on sprint and when I tried to update I was stuck on boot loader so I went online and switched esn over to my Treo for the time being as I worked on my Mogul. Eventually I got to load the rom fully and switched esn back. I noticed afterwards that my internet was only locking at 1x. Upon restart it would say EV but anytime it is connected to the net it is 1x. DSLreports clocked it at 50-90kbps so I know as definitely getting 1x speed. Reloaded the rom several times and still the same. This went on for 2 days. Eventually called Sprint and told them of my problem. They noticed that I was still on the regular Vision plan but I have always been able to connect to EVDO speeds so I never thought that was an issue. They updated me to Power Vision and right after I started getting EVDO speeds. I'm not sure if it was because of the change or maybe a restart of my data service that did the trick.
2 other issues I'm having is I noticed my phone is a little slow with this ROM. Opening programs etc. Sometimes the program using GPS like Live Search or GPS Viewer will lock up temporarily. The 2nd issue is what some are also reporting regarding signal. I noticed I get 1 to 2 less signal bars.
Overall 3.16 has been "ok". No problems with flashing really, and memory usage is "ok", I'm averaging around 17-18mb free with no apps running. It's not exactly the 20-22mb I had free with my prior custom rom, but enough to get by.
I'm not having problems with phone freezes or out of memory errors. I am, however, having some problems with BT and with net connectivity.
Data: I'm using Schap's Advanced config tool, version 1.1, and I've selected the option to keep my 'net connection live all the time. Unfortunately, this is not working, and I'm finding that throughout the day my connection goes down. With my prior custom rom, if I was streaming audio content over evdo or 1x, the connection would stay alive as long as the audio program was running, barring a loss of cell signal. Now I'm finding that about once an hour my data connection goes down and interrupts my audio stream.
BT: I have a Plantronics 320 headset, which worked flawlessly (albeit with less than stellar audio quality) with my prior rom. With 3.16, the volume and sound quality are much improved, BUT I am not able to answer calls on my headset. If I initiate a call with BT on, no problems, I can talk till the call is over, then press the headset hard button to hang up. If I *receive* a call, however, when I press the headset hard button to answer, the call is answered, but the audio is not directed to the headset. Instead, it routes to the handset.
GPS works well with TeleNav, GoogleMaps, Live, and generally locks onto 5-7 satellites within about 60 seconds if I'm somewhere with a clear view of the sky.
I tried using GPS2Blue to redirect the GPS data to a BT comm port. When I have BT enabled and attempt to redirect, GPS2Blue says BT port not open, waiting for BT port to open. If I go into comm manager and turn BT off, then GPS2Blue says BT port is open, and begins to wait for a BT connection to my laptop. If I go back into comm manager, the BT icon has been grayed out as if BT is off, but the little circled "X" icon is not superimposed over the BT icon as it would be when BT is off. If I click the icon again, it acts as if BT is being enabled, but the icon doesn't change, and the BT LED does not begin to blink. Don't know if it's a problem with GPS2Blue software or something else. Wish it would work cleanly, I'd love to use my 6800 as a BT GPS receiver for my laptop.
ETA: I've seen a few folks mention that when they answer a voice call their 6800 switches from Evdo to 1X. I'm wondering if this might be a way of implementing simultaneous voice & data. Has anyone tried taking a call and browsing the web simultaneously? I think this may be dependant upon network services in your area, so this may only work for folks in big cities with the most advanced network features, if it works at all...
ETA2: Just tried the above, and I'm getting the usual message that data connections cannot be initiated while on a voice call. I'm in a large city that *should* have all the latest network features, so if it dual voice/data was possible with this radio then it should work here. I'm assuming it's not presently possible, based on my experiment, but I'd be happy to be proven wrong.
with the sprint rom a ton of us have no audio out using an adaptor to listen through headphones
http://forum.xda-developers.com/showthread.php?t=363087
is a big thread about this going on the main board.
Took the plunge and installed the "stock" 3.16 on both my phone and a friend's last night. The first thing I want to note is that it went extremely smooth. No issues to note. It took a bit too long for my liking but it was fine. I didn't have to modify any MSID or MSN data - my phone worked fine right off the bat. Data was hosed, but a quick client-initiated IOTA Programming fixed that. (Settings, Personal, Phone, Services, Internet, Get Settings)
I have two constantly pinging(one 15 mins, one 30) e-mail accounts(one imap, one Exchange) that must keep my data connection alive. I haven't noticed a single decline in my data rate, nor a problem with disconnections. Then again, I live in NYC, which may make a difference.
GPS sucked last night - I couldn't get a satellite to save my life. On the way to work today, though, it was perfect. 4 satellites found in GMaps and tracking worked great.
I'm pretty happy w/the new additions to PocketOutlook too. Has anyone noticed that Gmail's IMAP works perfectly now, and that when you have multiple accounts - hitting messaging (when it's previously closed) brings up a choice of which account to go to? SWEET!
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
So the phone made me out to be a liar. The LiveSearch download from wls.live.com failed now. It definitely worked last night on my roommate's phone however. Hrm. I downloaded it from my pc and emailed it to myself and it actually downloaded. That's odd.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
I didn't try with the ROM update, but I did experience this with Live Search.
New Rom
Vinny75 said:
I didn't try with the ROM update, but I did experience this with Live Search.
Click to expand...
Click to collapse
Had trouble getting my phone to flash, because I flashed the radio before the rom. Once I got phone going is working perfect. Hooked up to pda net on laptop downloading at 1.7 uploading at 500K. Use Holux to get gps started all programs work, Tom Tom is more accurate with my mogul compared to the external gps. Have not tried my s9 headphones yet. Running the DCD beta and I have no complaints except for the memory. Phone quality is the same.
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
I was running Custels V1.1 2.14 and radio 1.47.00. I had my data set to connect all the time (which never idled btw...)and had Ev service everywhere. After installing Dcd's 3.16 & radio 3.27 I first recieved the "twin towers"... One had data connection and the other looked like the searching-for-signal tower. Plus my roam indicator was constanlty blinking.
After searching the forums, a helpful soul recommended *228 then press 3 which programs your phone. Remember that you are not upgrading to a new phone.
I then *228 and pressed 2 this time to program the latest PRL (which was 30029 before and still then). After searching some more, I saw that there was indeed a newer PRL which is 40029 (link in the first thread). I downloaded the PRL to my Sd card, dialed **775, entered my Alltel Unlock Code of 000000 and and the first screen I saw was update prl. Click on "Menu" in bottom right and hit the "Edit" button. Now you should see a empty value with "Browse" below it. Browse to the location where you placed your prl, upload and if you exit out correctly, you should be soft resetting your device.
After completeing the steps above, my roaming triangle was gone as well as the extra tower. I still have my data constantly on with Ev coverage all the time but my data actually idles now. Call quality has been noticed by myself and others as clearer and louder than before.
That Reg Entry doesnt exist on mine.
TalynOne said:
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
Click to expand...
Click to collapse
Mine has the following instead:
"HKCU\ControlPanel\PhoneExtendFunction\CDMA\VoicemailIcon
Value name:BtnDN_LAND Value data:Windows\_VoicemailBtn1_Land.bmp" and three other similars.
Should that entry be added in it's entirety or should I remove my current entries? Any body else find they have entries like mine?
I thought I had that problem at first, but when I looked more closely, the reg entry is *in* the CDMA folder, not in a sub-folder below CDMA.
!!Major Bluetooth Issue!!
recently installed DCD's new GPS enabled ROM for Verizon. Everything has been working well even the GPS !!EXCEPT!! Bluetooth OBEX. When I try to send / beam any type of file my XV6800 stops responding and I am forced to soft reset.
I don't know if this only affects the Verizon ROM or all carriers for that matter. Is there any one here that has a fix or know's of a fix to resolve this issue? Has DCD released any news on this? I would Gladly appreciate it, as all the people with this issue.
Searching For Service
I loaded the Sprint Test Rom. No when ever I boot my phone it takes ~4 minutes for the phone to lock onto the network.
You are may differ with this situation....
PRL's didn't change. Even reloaded 60610. EVDO roaming is gone. Guess they didn't like people forcing their phone to roaming in areas where Alltel has EVDO and Sprint doesn't. 60611 also removed EVDO roaming in my area. 60610 and 2.17 work fine with EVDO roaming.
CardExport & the My Documents-redirect-to-SD-card reg tweak:
HKLM\System\StorageManager\Profiles\SDMemory
change the value of the string "Folder" to "My documents"
no longer work.
My WLAN will not start up. When is comm manager, click the icon, it goes blue for a half second and then goes back to grey with the x. Should I install the radio again?
first things first
rayden25 said:
My WLAN will not start up. When is comm manager, click the icon, it goes blue for a half second and then goes back to grey with the x. Should I install the radio again?
Click to expand...
Click to collapse
Did you slide the WIFI button to the on position?
I have been unable to use wifi since the new radio
Yeah, I'm a dumb ass! I got the phone yesterday as an Asurion replacement for my XV6700 and installed this ROM first thing. Saw the switch after I wrote the post.
Well it's nice to know I'm not the only one with the wifi issue. It's really strange. After a hard reset or flashing my ROM, I have to have the wifi find my network when Windows starts before I install anything. If I start installing stuff and come back to the wifi later, it won't work. Just a annoying mental glitch I gotta tell myself when I hard reset that the wifi needs to be setup first. At least I know it isn't my phone acting flaky and just some weird glitch.
vaxick said:
Well it's nice to know I'm not the only one with the wifi issue. It's really strange. After a hard reset or flashing my ROM, I have to have the wifi find my network when Windows starts before I install anything. If I start installing stuff and come back to the wifi later, it won't work. Just a annoying mental glitch I gotta tell myself when I hard reset that the wifi needs to be setup first. At least I know it isn't my phone acting flaky and just some weird glitch.
Click to expand...
Click to collapse
I got mine working I think it was because I dropped it, I have to press in and over to make it stay on. ( Guess I will need a new one)
Anyone having/had this issue before? The wireless switch is off but somehow the wireless randomly goes on.
I'm on DCd 3.2.6 and I have WiFiRouter installed, not sure if its cauing this.
Not randomly but after soft resets I get them pretty much every other time.
Yeah I noticed same here, why?
yeah it has to do with wifirouter i just installed it to see what would happen and it does the same thing after every soft reset.
I have the same problem....
I installed WiFiRouter with my last version of DCD 3.2.5. I don't have it with 3.2.6 and I get the same wifi enabled afte soft resets.
rmk1825 said:
I installed WiFiRouter with my last version of DCD 3.2.5. I don't have it with 3.2.6 and I get the same wifi enabled afte soft resets.
Click to expand...
Click to collapse
If someone finds a key that turns it off and on I will make a cab that fixes it.
rmk1825 said:
I installed WiFiRouter with my last version of DCD 3.2.5. I don't have it with 3.2.6 and I get the same wifi enabled afte soft resets.
Click to expand...
Click to collapse
Must be WiFiRouter as I uninstalled it and no more WiFi after soft reset. Can some one look at the registry settings from it and see what might be the culprit?
I think it only happens after a software reset after having used it only.
Can anyone else confirm?
240sxer said:
I think it only happens after a software reset after having used it only.
Can anyone else confirm?
Click to expand...
Click to collapse
Not for me. It turns on for me about every other soft-reset, regardless of whether I've used WIFIrouter. Not a huge problem though. I just flip the switch on, then off, and the wifi turns off and stays off (until the next soft-reset, of course).
I get something similar, the WiFi icon in the title bar will "appear" to connect to something but never does. The slide button on the Titan is in the off position and WiFi is off in Comm Manager. Wifi will not connect to my home WiFi network unless I turn on both the slide switch and turn on WiFi in comm manager, then it will connect. Also the WiFi led will not blink, unless I "really" have it turned on.
So I have just learned to ignore the icon, but I will randomly check to ensure that everything is turned off.
beaubrewer1977 said:
So I have just learned to ignore the icon, but I will randomly check to ensure that everything is turned off.
Click to expand...
Click to collapse
not the solution that i expect. will have to uninstall wifirouter and only install it when needed... *sigh*
I experience the same issue on occasion, and I have never installed wifirouter.
same..
same problem, 3.2.6 and Wifi Router, i think its messing with us. the Wifi doesn't seem to be "switched" on. so i guess you can ignore it.
240sxer said:
Anyone having/had this issue before? The wireless switch is off but somehow the wireless randomly goes on.
I'm on DCd 3.2.6 and I have WiFiRouter installed, not sure if its cauing this.
Click to expand...
Click to collapse
This is a known bug with WMWiFiRouter and out Titans.
I was getting 15-20 second gps locks when I had radio .40 and DCD 3.2.6, but as soon as I upgraded the radio and DCD then it's taking like over 7-9 minutes to get a lock. Sometimes it won't lock at all anymore unless I do a hard reset on the phone. I'm not sure what happened. Does anybody have any ideas? Look at my signiture below for my current configuration.
What's the best Radio and ROM to use right now with the least amount of problems, etc.? I was looking at the V2.2 heavy and light, but I'm not sure if I really understand much about what they are about or the differences in what I have now. I think my biggest problem is with text messaging. If I do it a lot I have to keep restarting my phone because the memory goes down to zero in no time at all. Infact, I have to keep constantly clearing the memory if I use any programs at all. Thanks for your help and time!
Try either 3.3.4 or 3.2.6. I prefer 3.3.4
after all of my testing i ended up sticking with 3.2.6. did you do the aGPS fix? have you checked the QPST settings since your flash? generally, these settings should stick, but in some cases; such as when you need a new a-key, these settings are lost. my last flash removed all my QPST settings and i couldnt lock until i did the aGPS fix again with the updated IP address and port.
Well, in the past it kept all the information after I did the upgrade, so I just assumed it still did. I didn't need a new A-Key. I guess I'll check the QPST settings and do the aGPS fix again. It's been so long ago since I did all the GPS stuff I can't remember what I did and didn't do. I still do get locks but they take forever now and sometimes I don't get them until I restart the phone.
Why are you sticking with 3.2.6? Why don't you like 4.1.2 or 2.2 heavy or light? I've always had the memory problem where if I use programs it just eats up my memory and I don't get most of it back after exiting the software, and if I use my text messaging then my memory just goes down to zero in no time flat and I can't recover it unless I'm constatly restarting my phone. There must be some kind of fix for this. Please let me know. Thanks.. Steve
kflipproductions said:
after all of my testing i ended up sticking with 3.2.6. did you do the aGPS fix? have you checked the QPST settings since your flash? generally, these settings should stick, but in some cases; such as when you need a new a-key, these settings are lost. my last flash removed all my QPST settings and i couldnt lock until i did the aGPS fix again with the updated IP address and port.
Click to expand...
Click to collapse
the QPST settings have changed, so if you did it a while ago you probably just need to update it. youll be locking again after that. ive tested all of dcds roms quite a bit, and always ended up back at 3.2.6 or 3.2.5. im really happy with the speed and everything works exactly as it should. i have a pretty heavy today screen load as well as running several apps at the same time. i didnt like the 4.x.x roms for a couple of reasons. the unread text message thing bugged me alot. i also had a problem with random hard resets, which i was not a fan of.
kflipproductions said:
the QPST settings have changed, so if you did it a while ago you probably just need to update it.
Click to expand...
Click to collapse
Are the changes in the AGPS thread?
yes they are
Oh, really? Then that's probably part of the problem. I changed them maybe a year ago or longer. I tried running QPST to check and it's giving me an error message when I start it, so I'm going to have to try to reinstall it and see if that fixes it. Also, the links for the pictures are dead and they aren't coming up anymore, it makes it harder to figure it out.
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
I ran the Serf Telus aGPS Provisioning CAB file and that seemed to help. I sometimes get locks under 1 minute now, but sometimes it won't lock at all and I have to keep soft booting the phone to get it working.
Oh, so that's why my phone keeps resetting? It's not hard resetting I think it's just soft resetting. At first I didn't like the unread text message thing, but now I do because I get a lot of text messages and when I go to read them it doesn't mark them all as read in the group and I can read them when I get a chance.
I still had the memory issues with the 3.2.6 ROM with my memory going down to nothing, especually when I did text messages, I had to keep restarting my phone. That's been a problem I had with all my ROMs. I wonder why that is? Could it be the version of the MMS software I'm using? Is it the latest version?
Maybe I should go to the MR1 ROM? I still will be able to use the GPS and the WiFiRouter software with it right? Maybe that will solve all my problems? What about the 2.2 light and heavy ROMs? Does anybody know anything about those? Thanks for your help and time...
kflipproductions said:
the QPST settings have changed, so if you did it a while ago you probably just need to update it. youll be locking again after that. ive tested all of dcds roms quite a bit, and always ended up back at 3.2.6 or 3.2.5. im really happy with the speed and everything works exactly as it should. i have a pretty heavy today screen load as well as running several apps at the same time. i didnt like the 4.x.x roms for a couple of reasons. the unread text message thing bugged me alot. i also had a problem with random hard resets, which i was not a fan of.
Click to expand...
Click to collapse
Well, I uninstalled QPST and reinstalled it and it worked this time without any error messages. It seems if I don't use it for a while it gives me a error message if I try to use it again and I have to uninstall it and reinstall it and then it works OK. I don't remember the error message, but I think it's something about can't find a server or something.
Anyways, you were right about the information I had being old and not correct. I had 66.174.95.132 and 8888 instead of PDE IP Address: 216.198.139.92 and PDE Port Number: 8889. I corrected it and it still seems to take about 56 seconds to get a lock, but hopefully now it will be more reliable in getting the locks. I seem to remember in the past getting locks in less then 10-15 seconds, and I wonder why I can't get locks like that anymore.
Thanks for the help!
Well, I was wrong, I'm getting 15-20 second locks now and I'm getting twice the satalites, up too like 9 satelites and I was getting 1/2 that before and it's a lot more accurate now. Before when I was using Google Maps, I could see it was off like about 50-75ft, but now it's spot on, on my location. Hopefully someone knows the answers to some of my previous questions and can get back to me. Thanks..
I too was having this same exact problem and I had to update the QPST IP address and port again. Mine had reverted to the same thing that Apota's had, with the exception of my default port being 8888. All is working well now that I reset the QPST IP address. I get 6-8 sats and locks in about 10 seconds.
I had been experimenting with some of the RyanMogul's new ROMs when this broke for me. I tried 2.1 light and it stopped working. I'm currently running 1.1 light with it functioning after reusing QPST.
DustinEarnhardt said:
I too was having this same exact problem and I had to update the QPST IP address and port again. Mine had reverted to the same thing that Apota's had, with the exception of my default port being 8888. All is working well now that I reset the QPST IP address. I get 6-8 sats and locks in about 10 seconds.
I had been experimenting with some of the RyanMogul's new ROMs when this broke for me. I tried 2.1 light and it stopped working. I'm currently running 1.1 light with it functioning after reusing QPST.
Click to expand...
Click to collapse
I just upgraded to the v2.2 light. I think I'm going to have to get use to it because the interface is so different, but I got a GPS lock with my TomTom GPS software in about 4 seconds. I couldn't believe it. I haven't seen a lock that fast before. It's really awesome! LOL