Related
Hello,
Last night I installed wm2k5 on my Qtek 2020, works Great! Big thanks to everybody who helped to get this working .
unfortunately I stil have a problem synchronize my 2020 with my work laptop. (win XPPRO SP1, office 2003) On USB I get connection but nothing happens.
synchronize with IR there is a connection and it starts to synchronize but stops with a support code. It says: ActiveSync encountered a problem on the desktop. support code: 0x85010014
My home computer runs win XPPRO SP2, office 2003. here I can synchronize with no problem
I switch of all firewalls and security policy, and attemped various solutions whichs are posted these last days
anybody ideas?
Download SP2 :roll:
I would like to do that but it is my work laptop, They are a little slow :wink:
Hi folks,
as you can see my Pretec SD WIFI Card works fine with WM2005. And know I would like to get some WIFI Tools which are working with this configuration.
I just testet WIFIGRAPH, WIFIFOFUM and Wifi Tools and non of these worked.
Is there somebody out there with the same configuration and a solution?
Thank you very much in advance.
I had WiFiFoFum working on 2005...
I used the SmartPhone WLAN drivers though..
Sadly, I re-installed 2003SE.. ..so I can't help you debug..
Thank you very much for your reply. Just one question: What do you mean with "SmartPhone WLAN drivers"? The built in drivers? Got a link?
Thank you very much in advance.
Terms used in this post:
Pocket PC - A handheld device that has a 320x240 touch screen and runs Windows Mobile 2002/2003/2003SE
SmartPhone - A handheld device that looks like a mobile phone and runs some kind of Windows OS...
WM5 - Windows CE 5.0 (uncorrectly reffered to as Windows Mobile 2005)
U see, WM5 is sort of a merge between Pocket PC and SmartPhone if you look at the OS structure..
You can run SOME applications that were made for SmartPhones on WM5.
You can run MOST applications that were made for Pocket PC on WM5.
This is mainly because the hardware specs are more similar to a Pocket PC than a SmartPhone.
The WLAN drivers produced for Pocket PC (WM200x) doesn't work on WM5.
How ever, the drivers for the same WLAN card written for the SmartPhone OS does work under WM5.
All you need to do, is visit the pretec, sandisc, socket or what ever webpage, download the files for a SmartPhone and install these on your Himalaya..
It should work like a charm!
And I do think there was a post somewhere around here that had a link and description..
Maybe if we do some SEARCHING?
Thank you very much for your explanation and thank you very much for the hint of SEARCHING, but I did some searching yesterday on this forum and used some googling.
Anyway, the driver from Pretec works like a charm and I can connect to other machines and in the Internet. The only think, is that the WiFi Tools don't work.
Thats the only problem.
Well, good to hear that you got the WLAN up and running..
I do believe that I got WiFiFoFum working, but I might be wrong..
Hi.
I have already download the new w2k5 to my XDAII and now I can´t wyncronize it via USB with the new ActiveSync 4.0
I have tried via infrared and it works, but when i put my XDA II in the credle, and I try to do it via USB it doesn´t works... Any idea?¿
Thanks
are u sure the File/Connection settings/allow USB connection is checked??!!! :wink:....... otherwise,u cannot synchronise via USB...
RAGO :lol:
Yes, everything it´s ok
I don´t know what could it be... Maybe reinstalling activesync 4.0...
thanks 4 all.
The problem with the USB conection of my xda II and activesync 4.0 still kickin´...
I have read something abaut the same problem in another post? Or it´s just a dream?
Thanks.
It's kinda strange what's happening with u... :?
Now am not sure,but try the following:
*u must have service pack 2 installed(it's a prerequisite)
1-on ur mobile:go to active sync/menu/connections check synchronize all PCs using this connection,and in the window tab below choose USB.
2-try changing the USB port on ur PC.
3-try restarting ur PC,and ur mobile as well...
4-make sure the File/Connection settings/allow USB connection is checked
5-make sure ur cable is functionning well(try another device if u can,or another cradle if possible)
Good luck....
RAGO :lol:
I´m trying to synchronize in a IBM T21 Laptop... Maybe USB 2.0 not soported? Does anybody knows if ActiveSync 4.0 and wm2k5 only works with USB 2.0 ?
Many Thanks
spend some time today to make it work.
first check on device manager if under network adapters exist "windows mobile-based device" and is ok (not with ! sign),
then go to control panel at network and internet connection > network connection.if you have network card there will be one local area connection (or maybe much depend how many network cards have in pc).when conected pocketpc (wm2005) will create another local area conection,connect and disconect to see what number have ex. local area connection 2.right click properties then better tick on show icon on notification area to see what is about connection.go to advanced windows firewall >settings.at general tab turn off,at advanced tab unmark this area connection only,( I want to say to unmark local area connection 2 or what number have this connection between pocketpc and pc) leave marked other local area conection (if is present) to keep protect your pc from outside.press ok in that window,now you are back in properties page check at general tab >tcp/ip protocol > properties to be selected obtain an ip address automatically press ok ok again. now in pocketpc go to start > settings > connections > network cards here select connect to "work" and adapter remote-ndis host select "use server assigned ip address" ok ok again.dissconect and connect pocketpc to pc.look at taskbar right-down corner of monitor,near clock,you should see appear network connection icon.first time at every connection between two little monitor will be a red dot going from one to another,in this time computere search for dhcp server to receive ip address,in short time (4-5-6 seconds) link will be active icon will be clear not fading like previous and the two monitors will blink.if this is not happened check on control panel > Performance and Maintenance > Administrative Tools > services if dhcp client is started,if not start it manual and change startup type to automatic.if until now everything is ok disconnect pocket pc, dezinstall old version of active sync install version 4.0 build 4343 restart pc.after pc started up connect pocketpc to pc,it should work.if still not work dezinstall active sync and from control panel uninstall windows mobile-based device disconect pocketpc restart pc install active sync and connect pocketpc,in this way windows reinstall networ driver and now must work ok.
btw I forgot to tel to check at active sync allow usb connection.
good luck.
Thank you very much for everything gabiz_ro.
Ok, I´m going to tell you what I have realized trying to follow your instructions.
Firstable I don´t have that you call:"windows mobile-based device" Or I didn´t find it... I have looked at Lan or Internet connection.
Then, I have tried to find out the conection that you talk abaut that it must be created when I connect my PPC, but I didn´t find it too. I tried to find it conecting the XDA II via USB and via Infrareds (remember that via IRDA does works)
Finally I changed at my PPC what you say abaut remote ndis host, I saved it, and disconnected and connected again, but it didn´t appear anything at taskbar right-down corner of monitor...
I don´t know what to do... And I´m sure that the problem is hosted the new activesync 5.0 or in wm2k5, cause one hour ago, when I came back to w2003se, I synchronized the ppc correctly with the credle via USB...
I´m feeling very weird with it, cause when I put the PPC in the credle (with wm2k5 and actvesync 4.0) the normal sound of the PC when you connect something reconigzed, don´t sounds... what I hear is the double "tun tun" that sounds when you connect something not recognized.
Many thanks
wm2003 is identified by windows as usb device.
but wm2005 like a network connection.
first
right click on "my computer" > properties > hardware > device manager.expand network adapters,and here when conected pocketpc to usb you'll see "windows mobile-based device"
second
local area conection 2 (or other number,in raport with how many network cards are installed on pc) you''l find in start > control panel > network and internet conection > network connection.but appear only when xda is connected if xda is disconected that "local area connection" dissapear too,and xda must be identified and driver installed (windows mobile-based device show without any ! symbol in control panel).infrared connection will not work here.on that local area network who represent connexion between pc and xda right click > properties and mark show icon on notification area.....
if you hear other sound like you say,maybe xda is not identified or windows didn't install corect driver.take a look to see in control panel what is wrong.expand universal serial bus to see if ther is some unknow device or something wrong.
there is control panel print-screen and taskbar area prinscreen.
Ok!
I think that finally thanks to you we have discovered the problem...
I don´t have everything you talk abaut in the device list...
But what I have is this: Generic RNDIS (PROTOTYPE- Remembber to change id Vendor)
It is with the yellow alert icon.
But what could I do to put it right?
thanks
YEEEEEEEEEEES!
Problem FIXED!
That was the problem... It was not recognized, and with alert yellow icon... Thank you very much gabiz_ro, if you´ll didn´t helped me, now I would be changing back to w2003se
Thank you very much again
ok.
glad to can help.
Problem with sync on WM 5.0
Hi, All. Anyone HELP ME pls.
When I finished upgrade my device to WM2005, my Active Sync (4.0) not working, on USB mode.
Only it's working with Bluethooth.
And I saw on PC Device Manager -> Unknown Windows Mobile Device.(Generic RNDIS (PROTOTYPE--Remember to change idVendor)
How can I fix this Problem? :?:
re-install drivers for this device
Pleun,
Hoe installeer je de drivers opnieuw. Volgens mij heb ik die niet
Groetjes
Frenske :lol:
Yes, everything what you need to do, is to click on update drivers, and everything will be fixed
Best Regards
click Update!!!
Windows cannot find this driver...
But I fixed this problem, whereas after than my device is dead. (not working radio, calendar, bluetooth etc...)
Now WM2005 is not good working on XDA II.
try deleting the device, restart pc and have windows find it again.
prototype
Ive got the same problem, where can I get the drivers to fix this???
Thanks Peter
Drivers
IIve got my MDA PRO for afew days now.
I coudnt sync with active sync 4.
I did a rom update and de beta version of active sync 4.2
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
http://t-mobile.iris-global.com/mdas.html
This PDA is like the world in my hand.
Greetings pocket pc freaks
I have an Advantage x7500. I've installed the WM6 ROM here. My problem is I can't connect to my Advantage via Windows Mobile Device Center on my Vista box or ActiveSync on my XP box. The computer makes the expected sound when the USB connection is made, and in ActiveSync I can explore the device, but that's it. In WMDC, the error message for RapiMgr is "Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code)." I've done a lot of searching before I posted this and found a lot of posts (so at least I'm not alone). I've disabled firewalls, AV, anti-spyware, but no change. I've also uninstalled and reinstalled WMDC and ActiveSync. I do notice in Device Manager no Windows Mobile Remote Adapter under the Network Adapters node. Under the Mobile Devices node is HTC USB Sync. Any suggestions would be appreciated as I've been beating my head on wall on this. Thanks.
http://forum.xda-developers.com/showthread.php?t=315645
cayotte said:
http://forum.xda-developers.com/showthread.php?t=315645
Click to expand...
Click to collapse
Thanks, but been there, done that. (I didn't want to waste everyone's time so I did use the search button first)
As I mentioned in my prior message, in Device Manager there is no Windows Mobile Remote Adapter under the Network Adapters node. Do those of you using WM6 have such an entry for that adapter?
.
I have the same problem, but in Vista.
Sync has been working fine, but now suddenly it wont connect.
.
ps: sync on my SPV C500 works perfect. It's only my X7500 that won't connect.
..
lo and behold.....xman06's solution in the other tread worked for me.
"Try to go on setting connection usbtopc and disable advanced network functionality and ok"
perfect
teddyen66 said:
lo and behold.....xman06's solution in the other tread worked for me. "Try to go on setting connection usbtopc and disable advanced network functionality and ok" perfect
Click to expand...
Click to collapse
Thanks, but been there and done that too. (The downside of searching first is that all the usual solutions have been tried)
Tell me, under Device Manager do you have Windows Mobile Remote Adapter under the Network Adapters node? And under the Mobile Devices node do you have HTC USB Sync? I'm missing the former; that may be the issue but I'm not sure not knowing if others have it or not.
I bit the bullet and did a hard reset (too bad that doesn't work on spouses ) and ActiveSync started working again.
Kaiser / TyTN II WMDC Activesync no connection
I have the same issue described above. And no, the solutions given don't work. Not even a hard reset.
I am not sure what the issue is. Any ideas?
Similar problem solved
I had the same problem and went through many steps like those posted in this forum. I'm going to show my steps to solve this problem without hard reset your phone.
1) When the phone is connected, at the phone ActiveSync setting delete the PC profile.
2) Unplug the phone from the PC.
3) Uninstall and then reinstall the ActiveSync or Windows Mobile Center.
4) At phone system setting -> About -> make sure there is a name ID. Without this the PC cannot identify the phone and thus cannot sync.
5) Set the USBtoPC with 'advance network..." enabled.
6) To the extreme, before step 3, go to PC windows\inf and remove infcache.1 (need to add in an administrators account and set the privilage to full control). That may remove old corrupted drivers.
This page was coming up on the top list of google so i'll post my solution here.
I also spent hours trying to find the problem
uninstalled/reinstalled WMDC/Downloaded the latest version etc/Hard reset TYTN II/followed endless google searches,followed the instructions here etc etc.
Similiar to the OP i had windows making the "normal ding dong sounds but no connection happening.
In the finish what fixed my problem was with the device plugged in go to Device Manager on the PC and in "Network Adapters" select "Microsoft Windows Mobile Remote Adapter" and right click "Update Driver Software"
That got me back connected.....Hope it helps someone else out
Did it worked? I can't install WMDC without having my Pocket PC conected and when I have it it doesn't install anyway...
hey guys, if you have firewall installed disable it until the connection is made with your computer and phone, then re-enable your firewall.
this seems to be the problem solution for me all the time. Hope it helps.
Guys, I've waited to find a solution, it's been almost 10 months, and I wonder if I'm the only one with the problem. I can sync via USB cable, but not via Bluetooth. My setup:
Computer: Vista Ultimate 32bit running WMDC v 6.1
PPC: Dopod 181pro G3 WM6 PDAViet 4005b.
Any help appreciated. Thank you.
You must change AS config. on your PPC for BT connection
What do you mean? Under my BT in my PPC, I have ActiveSync checked. It does try to connect with WMDC, but it just never actually connects.
Has anyone gotten bluetooth sync to work under Vista and WM6? I'm starting to think there is either something missing on the WM6 PDAViet, or the Vista BT stack is missing something.
So, find the bluetooth settings in Vista. I can't help you much here since I'm using a german version.
Systemsteuerung\Hardware und Sound\Bluetooth-Geräte
(Control Panel\Hardware and Sound\Bluetooth-Devices?)
Open the panel and select COM-Ports, and add a Port for an incoming connection. Don't forget to pair the devices and tell the WMDC its allowed to use Bluetooth connections.
hope it works for you
p.s. I can't get my WM5 device to connect, its an hx4700. My Hermes works fine (WM6). Any suggestions on that maybe?
Ok thanks all, I finally got it kinda working. Kinda, cause it doesn't work all the time for some strange reason. The only thing I did to finally get it to work is, after I paired the PPC and computer up, I went to the BT icon on my desktop and clicked it open, and selected the 'HTC Phophet' icon, and under the service tab, I checked off Activesync. Then it was able to connect. It took a while to connect though, and also sometimes, it would not connect. Also, the speed is really slow, for example, to browse my PPC folders takes a very long time. I wonder if it's my upgraded radio rom. I will see if rebooting or soft resetting the PC/PPC would solve anything. Thanks again.
BT Sync with Vista Home Premium and X7501??
exe said:
Guys, I've waited to find a solution, it's been almost 10 months, and I wonder if I'm the only one with the problem. I can sync via USB cable, but not via Bluetooth. My setup:
Computer: Vista Ultimate 32bit running WMDC v 6.1
PPC: Dopod 181pro G3 WM6 PDAViet 4005b.
Any help appreciated. Thank you.
Click to expand...
Click to collapse
I could use some help with this too....
Been trying unsuccessfully to sync my Athena X7501 via BT with my lil' Kohjinsha SH6/Vista Home Premium but no go...
No problems syncing with USB Cable...
I can get both to 'see each other' but nothing happens either in Sync Center/Mobile Device Center in terms of connecting or when I click 'Sync' in ActiveSync on X7501...
Any suggestions????
ArchiMark said:
I could use some help with this too....
Been trying unsuccessfully to sync my Athena X7501 via BT with my lil' Kohjinsha SH6/Vista Home Premium but no go...
No problems syncing with USB Cable...
I can get both to 'see each other' but nothing happens either in Sync Center/Mobile Device Center in terms of connecting or when I click 'Sync' in ActiveSync on X7501...
Any suggestions????
Click to expand...
Click to collapse
if you see "serial port" instead of "active sync" during getting them to 'see each other' you may check "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort" key using regedit.
you have to change it to your bluetooth stack's incoming COM port (usually COM7). You will probably see "Bluetooth" in that key. just change it to "COM7" and restart the computer then rebind the devices.
it worked for me on my vista.
gokhanmoral said:
if you see "serial port" instead of "active sync" during getting them to 'see each other' you may check "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort" key using regedit.
you have to change it to your bluetooth stack's incoming COM port (usually COM7). You will probably see "Bluetooth" in that key. just change it to "COM7" and restart the computer then rebind the devices.
it worked for me on my vista.
Click to expand...
Click to collapse
Thanks for that input, gokhanmoral!!
Will check that out....
OK, did a search in RegEdit for
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort"
but it didn't find this....
I do see
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\" with several subfolders in it....
One folder is called 'Extended Serial' and another is 'Services'....
Can you be verify the path to the item I should edit???
Thanks!
ArchiMark said:
OK, did a search in RegEdit for
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\SerialPort"
but it didn't find this....
I do see
"HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services\" with several subfolders in it....
One folder is called 'Extended Serial' and another is 'Services'....
Can you be verify the path to the item I should edit???
Thanks!
Click to expand...
Click to collapse
it is not a path but it is a REG_SZ (string) key.
sorry, my mistake. I should have written SerialPort key under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
see the attached image.
it was "Bluetooth" before I change it.
I had no option to select COM7 in WMDC because it is marked as "used" in another registry but changing it and reinstalling the bluetooth stack is a harder way to fix. so just change it to whichever port your stack is using for incoming serial. you must have an option to check it in control panel.
gokhanmoral said:
it is not a path but it is a REG_SZ (string) key.
sorry, my mistake. I should have written SerialPort key under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
see the attached image.
it was "Bluetooth" before I change it.
I had no option to select COM7 in WMDC because it is marked as "used" in another registry but changing it and reinstalling the bluetooth stack is a harder way to fix. so just change it to whichever port your stack is using for incoming serial. you must have an option to check it in control panel.
Click to expand...
Click to collapse
Thanks for the clarification...edited that key....
Weird thing is that my X7501 and laptop can 'see each other' but still doesn't sync....when I click on 'sync' in ActiveSync on X7501 nothing happens and on laptop Mobile Device Center says 'Not Connected' and Sync Center shows the partnership with my X7501 as 'grayed out' looking.....
Not sure what you mean by 'you must have an option to check it in control panel...
Any suggestions as to what to check now???
Why Don't I See 'ActiveSync' Listed in BT Services List?
Seems that the problem I'm having getting my 7501 to sync to a PC via BT has to do with no having ActiveSync show up in the list of available services in BT partnership settings.
I just see Serial Port listed, not ActiveSync.
Could it be that I need to install ActiveSync again?
I'm using Vista on PC so I thought it uses Mobile Device Center and Sync Center which comes built-in to Vista. So didn't install ActiveSync myself...
Does ActiveSync install anything onto a mobile device like the X7501?
Thanks,
Mark
Frustrated X7501 BT Sync'r.....
GOT BT Sync Finally!
Just thought this might help someone else down the road to know what the problem turned out to be on why I couldn't BT Sync my X7501 and my laptop....
I called HTC this morning. They were actually extremely helpful!
Turns out that my laptop was using BlueSoleil BT software instead of MS BT Stack...deleted BlueSoleil and restarted and voila! MS BT Stack installed and then I could see ActiveSync service on my X7501!!!!
Who would of thought about that.....
Still troubled with bluetooth sync via WMDC/Active Sync
exe said:
Guys, I've waited to find a solution, it's been almost 10 months, and I wonder if I'm the only one with the problem. I can sync via USB cable, but not via Bluetooth. My setup:
Computer: Vista Ultimate 32bit running WMDC v 6.1
PPC: Dopod 181pro G3 WM6 PDAViet 4005b.
Any help appreciated. Thank you.
Click to expand...
Click to collapse
I have the same problem. Seems to be a fairly common one. My WM6 PPC (with Active Sync) will not sync via bluetooth to my Vista Ultimate "powered" machine with WMDC. No trouble syncing via USB. Also no trouble with bluetooth pairing of the PPC and my machine or sending files (directly) from one to the other via bluetooth. Just no syncing of Calender, Tasks, etc. over bluetooth. Kind of infuriating.
Also possibly worth noting---I had no trouble syncing same PPC to my old XP powered machine with Active Sync. Why did Microsoft insist on "improving" on something (Active Sync) that worked just fine and was straightforward to use? Vista and WMDC in particular are steps backward in my view.
Pointless griping aside, the symptoms suggest that bluetooth stacks are working, that active sync and WMDC are talking (over USB), just no syncing, suggesting something is inconsistent in the way the ports are set up, just as others have implied in this thread.
Incidentally I tried everything listed in this thread, including the Regedit modification (all of this made a lot of sense given the problem) and still get no response when I try to sync over bluetooth.
On my ppc the only options for com ports are COM2, COM4, COM6 and COM8. Does this matter?
Help!? Please.
Thanks in advance for any input.
Well, as for myself, it tured out that my problem had something to do with the pocket pc ROM I installed, as posted in the first thread. It would sync a few times at first, then never again. So, all this time (years) I've just done it with USB wire.
Now I just got done upgrading my Prophet to Ultimate v 2 ROM. And my BT active Sync is now working like normal. I knew from the description of the first paragraph there was something wrong with my flash of the new ROM or the ROM itself. Anyway, now it's working like normal. It's now time to go fix my headphone jack that is stuck in headphone mode lol. I need a new PPC!