PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
What i did was to install CUSTOM__RUU_Wizard_1050412_WWE_101_11210_ NK.NBF file via soft spl method...... i repeat i know now what i have done ( installing G3´s IPL/SPL into a G4 ) but if someone has a software method for fixing this problem please HELP.....
information is your friend, post EXACTY what you did and EXACTLY what the phone is doing now.
AYALA445 said:
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
Click to expand...
Click to collapse
The CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE only has G3 IPL/SPL.
This means that if you forced the SPL OR IPL on the phone, you have bricked it.
Block sizes from a G3 are different from the blocksizes on a G4, so you won't be able to flash the correct IPL/SPL back to the phone iusing any software method.
Only method which "could" work is the still unavailable JTAG method.
But because the Omap 850 datasheets (complete datasheets, not the simple block diagram) aren't available, it's impossible to find the JTAG pins.
AYALA445 said:
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
What i did was to install CUSTOM__RUU_Wizard_1050412_WWE_101_11210_ NK.NBF file via soft spl method...... i repeat i know now what i have done ( installing G3´s IPL/SPL into a G4 ) but if someone has a software method for fixing this problem please HELP.....
Click to expand...
Click to collapse
I think you can try this if your phone still can get into bootloader mode, i got mine fixed this way hehehe.... good luck man
here is the link to my post in the forum:
http://forum.xda-developers.com/showthread.php?p=2159021#post2159021
goodluck
Related
My Wizard Flash the G3 IPL/SPL, How to wakeup it?
gzDragon said:
My Wizard Flash the G3 IPL/SPL, How to wakeup it?
Click to expand...
Click to collapse
You need to be clearer.
1.) Is your device a G3 or a G4 chipset?
2.) If you flashed a ROM with the IPL/SPL information for the wrong chipset, you may have bricked it.
3.) Is it CID unlocked? If so, flashing a ROM on your device may have bricked it.
Please give us more detail about what it's doing.
If you have truly bricked it (made it totally unusable), your only option may be to send it in for repair/replacement. If not, there may still be some hope.
It appears that English may not be your primary language. If this is the case, I HIGHLY recommend getting some personal assistance in understanding the information provided by the person who provided the ROM.
DON'T EVER FLASH A ROM IF YOU DON'T UNDERSTAND THE INSTRUCTIONS 100%!!!!!!
If you think you just have a feel for it, go back and re-read it until you understand!
That having been said, WELCOME TO THE COMMUNITY!
We all help as we can.
I confirm it is cingular 8125(Wizard 100) is G4 chipset. Befor i flash, IPL/SPL is 2.25.0001. I may have bricked it!
Thanks!
yes, it's definitely bricked. Never flash a G4 with a G3 ROM. Check ur Private Message.
i have the self problem with my xda mini s, before was an G3, then i have updatet to G4, if bricked, .... nothing if
plzz help
i have bricked my qtek will updating, there is any way to turn it on..
plz help me..
If you flash the G3 ipl/spl to a G4 wizard.I'm sorry to say that your Wizard is broken .Are you in china now ,if you in china,you can change the brocken chip .it's cost 400 RMB.
I flashed a ROM with G3 IPL/SPL to my G4 and was able to recover by cooking my own ROM.
please can you share ur cooked rom with us please?
I would be happy to. However, all I did was followed the tutorials found on this site, and cooked it using the WWE off htc's website, stripping the IPL/SPL.
Yesterday a upgrade my TYTN with new rom (bootloader 1.09) (first it was Original tytn rom bootloader 1.04 ) .During upgrade it stopped and tell me about recovery , I canceled it and try to reupgrade . I was not successful and after that there is no way to do anything . Not do downgrade nor upgrade .
Who can help me , please . now I have a 800$ tytn which has only a screen which only show bootloader screen .....!!!!
PLEASE HELP ME
jash431 said:
Yesterday a upgrade my TYTN with new rom (bootloader 1.09) (first it was Original tytn rom bootloader 1.04 ) .During upgrade it stopped and tell me about recovery , I canceled it and try to reupgrade . I was not successful and after that there is no way to do anything . Not do downgrade nor upgrade .
Who can help me , please . now I have a 800$ tytn which has only a screen which only show bootloader screen .....!!!!
PLEASE HELP ME
Click to expand...
Click to collapse
Did you try flashing HTC 1.18.255.3 07/22/06 Rom after failure? Any error message?
ftp://xda:[email protected]_1.18.255.108_1.03.03.10_qtek_wwe_ship.zip
For everyone who try to upgrade roms, please make sure you reboot your PC first, exit all programs(eg.MSN.baba) and don't launch any program during the update. Also, make sure your battery is fully charged.
Thanks for your Answer
I tried "ME_DT_WWE_1182553_106_10303_Ship" but I was not successful (it has also bootloader 1.04) .It said no vendor id !! . is there any deference between your suggested rom .
now I am downloading yout suggested rom . I hope I'll succeed . but if not , how can I do .
Thanks for your following suggestion .PLEASE ANYONE HELP MEeeeeeeeeeeeeeeeeeeeeeeeee!!!!!!!
looks like you haven't read the wiki yet. check this page regarding upgrade problems.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
PLease Read Carefully
I know all last ways to solve my problem but it's new one .
you see my bootloader is 1.09 and it newer downgrade with previous tools even with DownGrade_SPL.rar . because it never let us to downgrade bootloader version
PLEASE HELP MEeeeeeeeeeeeeeeee
jash431 said:
I know all last ways to solve my problem but it's new one .
you see my bootloader is 1.09 and it newer downgrade with previous tools even with DownGrade_SPL.rar . because it never let us to downgrade bootloader version
PLEASE HELP MEeeeeeeeeeeeeeeee
Click to expand...
Click to collapse
Uhuh... http://forum.xda-developers.com/showthread.php?t=284557
Seems to be a common problem....
Also looks like only way out is to flash a matching CID rom, however I cant try this as there is no released UK M3100 rom.
My issue was slightly different, but the end result seems to be the same. Confirm that you've got a ROM with the same CID. However querying the CID (info 2 in bootloader check wiki for more detail) returns bizzare "corrupt"? looking CID in which case even the "correct" rom for the device wont work....
Whats your CID..... Is there a matching CID rom available, and what happens when you try it. You'll probably need to flash from the bootloader.
If that fails, its return to base for a reflash....(that'll be chargeable....)
POF or some of the other bright sparks may be able to revive, but I've tried all tricks so far.....
I have the above wm smartphone,its not sim locked or something.
I want to install wm6 and also i want some support for greek language.
Please tell me what should i do cause i am a total noob on windows mobile and i am affraid that i might brick it.
Is there anyway i can unbrick it if it bricks?
Thanks a lot...
please guys help me,I dont want to ruin my ppc
I bought it from ebay so i forget about the warranty...
it had only been an hour.. give people time to reply.
I updated with this:
[WM6.1]ROM Prophet My Green Edition[Full and Clean Version] (UC)(Update on 15.4.2008)
and it shows only the bootloader screen.Now i am installing the nvid.exe again.
At least it will unbrick it.
Gherudos said:
I updated with this:
[WM6.1]ROM Prophet My Green Edition[Full and Clean Version] (UC)(Update on 15.4.2008)
and it shows only the bootloader screen.Now i am installing the nvid.exe again.
At least it will unbrick it.
Click to expand...
Click to collapse
you have to HARDSPL first.
Info here.
http://forum.xda-developers.com/showthread.php?t=350033
If your device is G4. Your SPL should change into this one 2.G4.4PDA or 2.G3.4PDA for Device G3
If your SPL not one of them. You will always stuck up at bootloader mode.
Did you didnt read , how to upgrade it.
I wrote it at my Thread.
You must hard SPL before upgrading! If you want to have the device in greek, try Gullums Coffee ROMs.
Guys, can please help me out..i cannot HARD SPL my G3 prophet..i used all the utilities avialable here to no avail..it always stand to 2.20.000 i cant upgrade or downgrade to any rom i want..please help
blackheartxix said:
Guys, can please help me out..i cannot HARD SPL my G3 prophet..i used all the utilities avialable here to no avail..it always stand to 2.20.000 i cant upgrade or downgrade to any rom i want..please help
Click to expand...
Click to collapse
In your case, you may use LazyTool to upgrade.......
try 1d
Hello everyone, my Advantage now is only on Bootloader and say:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
This happen because i use the X7510 hrd spl unlocker from wiki page.
What can i do now?.Please HELP ME.
I try with some ROM's and hrd spl's and nothing.PLEASE HELP ME.
vegaz said:
Hello everyone, my Advantage now is only on Bootloader and say:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
This happen because i use the X7510 hrd spl unlocker from wiki page.
What can i do now?.Please HELP ME.
I try with some ROM's and hrd spl's and nothing.PLEASE HELP ME.
Click to expand...
Click to collapse
You need to flash with the original rom that came with your advantage.
As far as I can remember you can only do the hard spl from an activesync connection so flash the right rom first.
I don't know what is my right ROM for my HTC.And don't have support in HTC.COM...
Please tell me what is my right HARD SPL for this version?
I can't find original ROM for my HTC
Please i am verry confused?
PLEASE PLEASE PLEASE
vegaz said:
I don't know what is my right ROM for my HTC.And don't have support in HTC.COM...
Please tell me what is my right HARD SPL for this version?
I can't find original ROM for my HTC
Please i am verry confused?
PLEASE PLEASE PLEASE
Click to expand...
Click to collapse
The bootloader screen you showed is of an unlocked athena
This is the wiki page
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena
It has an ftp link to some original roms
ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
and some wm6 tmobile updates
http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
try to load the wwe ones first and once you have done this apply the unlocker from olipro to be able to load cooked roms
Once this has been done you should have spl 1.2 and will be able to load spl 1.2 roms
Of course , most of the latter roms are SPL 3.5 which is changed by using the AP4 rom.
Good luck
No, I can't put nothing in phone ....
Allways i get error (INVALID VENDER ID, ERROR UPDATE TOOL...) and more, more.When i try to put ROM from MINI SD i get error 00028002, or 00068002.
PLEASE HELP ME GUYS
vegaz said:
No, I can't put nothing in phone ....
Allways i get error (INVALID VENDER ID, ERROR UPDATE TOOL...) and more, more.When i try to put ROM from MINI SD i get error 00028002, or 00068002.
PLEASE HELP ME GUYS
Click to expand...
Click to collapse
To load from the sd card you need to extract the nbh file from the package and rename it athe.nbh (or something like that)
you also have to remove the sim card.
did you do this?
If you did, you are probably experienced and you could try talking to cmonex on IRC
She still uses this mc and helped write the unlocker software
Yes I try with SD upgrade but...Nothing aways i have error 00068002 or 00028002.
vegaz said:
Yes I try with SD upgrade but...Nothing aways i have error 00068002 or 00028002.
Click to expand...
Click to collapse
Hey vegaz, I see you got your athena working again by using cmonexs mac1exe.
did you get to talk to her on irc or did you just try it?
I saw you post last night but I was too busy to talk.
I thought from what y ou posted that your SPL was not corrupted.
Anyway am interested in the process that led to your solution
regards lakeman
vegaz said:
Hello everyone, my Advantage now is only on Bootloader and say:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
This happen because i use the X7510 hrd spl unlocker from wiki page.
What can i do now?.Please HELP ME.
I try with some ROM's and hrd spl's and nothing.PLEASE HELP ME.
Click to expand...
Click to collapse
(sorry for my english)
I have the same problems. Here is the solution
http://forum.xda-developers.com/showthread.php?t=592730
I fix my problem with help from CMONEX
vegaz said:
I fix my problem with help from CMONEX
Click to expand...
Click to collapse
that'sgreat.
did you consider a donation to her paypal account in her sig on xda?