i try to follow the steps from
http://www.mrvanx.org/cms/index.php...ask=view&id=52&Itemid=26&limit=1&limitstart=2
step 1 Flashing HardSPL is OK, SPL is 2.10
but in Step 2, radio rom, i got error message said unknow version after click autodetect
i try to skip up radio rom, direct to wm6 rom, same message displayed
please advice,what can i do
thxthx
df7 said:
i try to follow the steps from
http://www.mrvanx.org/cms/index.php...ask=view&id=52&Itemid=26&limit=1&limitstart=2
step 1 Flashing HardSPL is OK, SPL is 2.10
but in Step 2, radio rom, i got error message said unknow version after click autodetect
i try to skip up radio rom, direct to wm6 rom, same message displayed
please advice,what can i do
thxthx
Click to expand...
Click to collapse
Hi!
Some times happening with me and I used to mark it as a “2.02/2.10 New Boot loader” and “its Hard-SPL” it Works.. at least for me and good Luck
Hello guys!
I have read the Wiki, been through whole forum but I still have some questions.
I have a T-Com TC500, the same as Iteq s200. It is a G4 version. with original SW installed on it.
I would like to upgrade it to a newer ROM because I would like to get English language instead of german.
I read on the forum that one option is with the shell tool.
The other option should be directly with the RomUpdateUtility which comes in ie. Fantastic b4 step 1. What is then step 2?
There seems to be even the third option also with RUU but with using only .nbf file from the ROM.
I am totally confused about what I should do first.
I also read that it is reccomended to do the ROM dump on SD card but it is not possible with locked CID - what to do in order to avoid bricking your device.
I know that there are quite a lot of questions in my post, but would appreciate if you could help me.
THX, Zmelkoow
Fantastic Mobiz Step 1 write Splash Screen and new Ext_Rom with a WM5 ... its for 100% cleaning the QTEK. they use this way ... i dont know why ... but it works!
Step 2 write only the WM6 OS!! this type of writeing roms is easyer to handle ... you doesnt need any steps to build a rom ... save time!
you need both steps!
About CID ... you have right! Without CID unlocked device you cant make a dump ... but you dont need them! If you can enter the bootloader ... you can flash any rom. if you cant enter the bootloader ... sd-card is useless!
Tc500 same
Dear guys I have a TC500 same.Could you explain me what I have to do?What you mean for "write Splash Screen and new Ext_Rom" Do you mean that I have to put the part 1 of mobitz in a sd card a into the phone?and launch the installation?is to be the phone switch on or switch of,while I insert the sd card?Or other method?Thank you
Please, CID-Unlock first the phone and secure the ROM!!
su4cs said:
Please, CID-Unlock first the phone and secure the ROM!!
Click to expand...
Click to collapse
very importent!!!! we need it!!!
!!!+++***PLEASE, PLEASE, PLEASE NOTE! THIS IS ONLY GOT G4 WIZARDS!!! THIS GUIDE IS NOT INTENDED FOR G3 WIZARDS IN ANY FORM OR FASHION!!! IF YOU FOLLOW THESE INSTRUCTIONS AND ATTEMPT TO UPGRADE A G4 WIZARD WITH THEM, YOU WILL BE THE OWNER OF A WHITE PLASTIC BRICK!!! NEITHER I NOR XDA-DEVS WILL BE HELD RESPONSIBLE IF YOU BREAK YOUR WIZARD FOLLOWING THIS GUIDE!!!***+++!!!
Hey all, since most people are asking for pictures and such on how to upgrade G4 Wizards to Windows Mobile 6 or better, I have gone ahead and made a text guide, with screenshots to follow along with, that also includes all of the files needed to upgrade a G4 Wizard with(along with credits to their coders.). It is uploaded to MediaFire, and the link is at the bottom of this post. Here is whats included:
How-to text guide, written by Myself
The Wizard Service Tool, by mestrini
The ActiveSync Setup.exe, for people that dont have it already
and SoftSPL, by the exuinoxe
PLEASE NOTE!!!-I did NOT include any ROM files with this package, YOU MUST supply the ROM of your choice yourself(this is stated in the guide aswell.).
Yes, it IS a SoftSPL guide, seeing as NO n00b understand how to make the HARDSPL method work. It is(imho) well written, and all of the screen shots are marked with arrows and such as to what to do next...so please, everyone download it and make improvements, criticize whatver. And please note!!
I DO NOT WANT ANY KIND OF DONATIONS FOR THIS THING!!! I have had 3 people send me money for this guide from my forums, and it should not come to me. IF YOU GET SOME USE OUT OF THIS GUIDE, THEN PLEASE DONATE TO EITHER XDA-Developers, OR TO THE ORIGINAL SOFTWARE AUTHORS, NOT TO ME!! Thanks!!!-ashasaur
DOWNLOAD LINK-(filesize approx-13.15mb)-http://www.mediafire.com/?hzbx043cglm
Great guide. I think it might flow better in a html format or posted on the forum here with the images linked offsite?
Hey, I'm a noob(ish) and I've managed to unlock my phone through HardSPL. Didn't think it was that hard.
But of course the 2 and a half years of Computer engineering school plus work experience manually loading roms into memory from the bootloader on an embedded system couldn't of hurt.
Can not find the upgradr guide
Hi ashasaur,
I am trying to download the upgrade guide from http://www.mediafire.com/?hzbx043cglm but it says not available, is there another way to wownload that please?
Thanks,
Sam
well, ive just tryed it, and it seems to still be there...try again perhaps?
Thanks
WORKS fine. Nice guide. Easy to follow.Thanks...
WM6.1
Hey guys,
I was wondering where can we find WM6.1 rom??? Also, would it work on an HTC wizard G4? Are there extra steps involved?
By the way, I'm running TNT 1.9199 Rom... If I upgradew to WM6.1, will it wipe out this rom too?
Thanx,
Phil
Cphil1 said:
Hey guys,
I was wondering where can we find WM6.1 rom??? Also, would it work on an HTC wizard G4? Are there extra steps involved?
By the way, I'm running TNT 1.9199 Rom... If I upgradew to WM6.1, will it wipe out this rom too?
Thanx,
Phil
Click to expand...
Click to collapse
Upgrade to TNT 19213 series,its wm6.1. Yes ! flashing a new rom will completely wipe out and replace the existing rom and files,its just like formatting the Hard drive of pc while installing a new OS.
can u give me a rom pls i only have my spv m3100 for one day and the guide is very easy to follow but i don't know what rom to use please help
I start Wizard Service Tool an click on [Enable Rapi. and Unsigned Apps].
After this it comes about 20 seconds later that all is ok an i can do the following steps. When i go to Device Info i get this:
On Wizard Service Tool i have got this Message:
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
Can anybody tell me why?
I have try softreset an do all steps again. Not better.
Engersen
are you using a G3 of G4 device? Again I say, THIS GUIDE IS ONLY FOR G4 WIZARDS!
I have got a G4.
My Wizard show on start IPL 2.21.0001 and SPL 2.21.0001.
Any ideas for my Problem?
Thx Engersen
hmmm, I would just go ahead and skip that step then, and start after it, with the SoftSPL and such. Just read and you should be fine.
Really? Without Wizard Service Tool?
I can try it. I hope all works great after this.
WST is not interest because SoftSPL do the temporary CID Unlock. Right?
Engersen said:
Really? Without Wizard Service Tool?
I can try it. I hope all works great after this.
WST is not interest because SoftSPL do the temporary CID Unlock. Right?
Click to expand...
Click to collapse
Sometimes, 'EnableRapi' and 'Cert_SPCS' doesn't get executed automatically by WST Tool,so its recommended to manually copy and paste these two files in the phone and execute them,you'll find these files in the installation folder of the Wizard Service Tool folder in the 'Files' folder in the Program Files on C:\ drive.But WST Tool doesn't CID unlock a G4 device,so if you want to upgrade,then read and follow the methods 'SoftSPL or HardSPL posted as stickies in the this G4 forum.
Yes i know that WST is not unlock CID.
I use the package from first Post. There is SoftSPL inside to unlock. Right?
Ok, i think i have following steps to do.
Copy both files 'EnableRapi' and 'Cert_SPCS' to Wizard and execute them.
Then Unlock CID with SoftSPL and follow all other steps from Userguide of Package from the first page. Right?
Thx for help and greetz from Germany
It ist possible downgrade back to WM5 if WM6 is not my like?
Engersen
of course, though you will need to follow one of the downgrading guides here on the forums, as I do not know the exact steps.
Ok, thank you for help. In German all was easy for me. Now i want to ask for everything
Downgrading to official wm5 depends on the method with which you upgraded. If you upgraded through SoftSPL,there's no further procedure,just flash the official rom,coz SoftSPL doesn't change the official original IPL/SPL,but if you upgraded through HardSPL,than you'll first have to remove HardSPK revert back to original IPL/SPL and then flash the official rom,as HardSPL flashes the patched IPL/SPL and its changed.
hey,
im following tis forum for a while now and read about flashing roms and using hardspl and such, but i dont get it. i dont know which step to take first, which rom is best to download. i really like the s600 display driver to be in the rom. because that will make my mobile alot faster
can somebody explain to me how to flash my touch dual?
got wm6.0 ATM
btw im dutch, so if anyone dutch can help me (msn maybe? )
thank you very much!
PhoenixNLx
First backup anything you like to keep. Installing HardSPL will erase all data
Install HardSPL:
http://forum.xda-developers.com/showthread.php?t=355730
to install HardSPL you need to download:
SSPL 1,16
http://forum.xda-developers.com/attachment.php?attachmentid=63902&d=1199210757
HardSPL 1,15
http://forum.xda-developers.com/attachment.php?attachmentid=73353&d=1204286404
and Flash-uspl-niki
http://forum.xda-developers.com/attachment.php?attachmentid=63944&d=1199227284
and then just follow step 1-9 (skip 7)
when this is done, it will enable you to flash any rom of your choise
I tryed this ROM on my Mozart:
ERROR [296] : UPGRADE ONLY
I get an Error mesage of (296) upgrade only and it says The NBF file cannot be used for your phone, please get a newer NBF file. Can anyone help me out without me having to bake my phone? Any answers would be great!"
In about phone is PD67100
nikolav said:
I tryed this ROM on my Mozart:
ERROR [296] : UPGRADE ONLY
I get an Error mesage of (296) upgrade only and it says The NBF file cannot be used for your phone, please get a newer NBF file. Can anyone help me out without me having to bake my phone? Any answers would be great!"
In about phone is PD67100
Click to expand...
Click to collapse
I need some info from you (link to the rom) but to flash roms with different vendor id's we need HSPL , and HSPL isn't jet developed .