I have been using Seidio (www.seidioonline.com) holsters for the last 2 phones I owned (Cingular 8125 and 8525). Unfortunately, they do not make one for the Polaris aka Cruise. I really like these hard plastic holsters that allow you to snap the phone into place. They are even felt-lined to prevent scratches.
Either way, I found a similar looking holster for the Black Jack phone. The Cruise jiggled a little in the holster so I took a table torch (big cigar lighter) and a pair of needle nose pliers to the holster. After about ten minutes of torching (only heat the case for a very short time), bending and rinsing (to cool it all off) I have a snug fitting case a la Seidio. It's a little ghetto but it works for now.
If anyone sees a commercially made case like the ones at seidio please let me know.
LOL ! send pics of your blowtorch job plz...
Related
Anyone have any leads on sources of cases to fit the Wizard? The one that comes with the K-Jam look decent of first view, but since I'll probably want something nicer I figured I would get this thread started.
Robert Harrold
Houston, TX (Ordered my K-Jam through MMB... hope to have it next Friday!)
Well, an update on this, I picked up a Targus Small Camera case Model DCCS00 and while it is a bit loose front to back it fits nicely side to side. A bit bulky but functional and It is easy to insert/remove the device. Also it securely attaches to my belt so I don't have to worry about scraping it off on my office chair. It'll do until someone releases a 'made for' case.
Robert Harrold
Houston, TX
any news with more cases to buy for the k-jam??
anyone?
I ordered and got this case for my wizard after it was recommended on another board. The guy said he found it at a mall in NY at a mobile phone accessory cart. I like it a lot. Fits perfect. The belt clip (although it isnt visible) has a built in swivel so you can wear it vertical / horizontal / or on an angle. I wear it at an angle and its so easy to place in pouch and pull out. I can also charge with the wizard in the case becuase it has a small opening in the bottom.
http://www.shopcell.com/cell-phones/cellular-accessories/HANDSPRING%20PALMONE/Treo$650/Leather-Case-Treo-650-600-Vertical-Pouch-Black-Leather/TREO650LP.html
I just ordered an OEM blackberry 71xx slip case belt clip and Tre 6xx slip case from ebay.
http://www.shopblackberry.com/_blac...gory=BlackBerry+7100t&pid=F2222WBW5TARNDHUC9F
I like to concept of slip case rather than attaching something on my belt.
I'll keep everyone posted here...
Review: PDair booktype leather case
I did a review of the PDair booktype leather case here:
http://www.onppc.com/forum/article_read.asp?id=12
Cheers, Sabesh.
I wonder if the flip type PDAir case uses the same technique to keep the k-jam in place.
I prefer the not so bulky cases. using the case that came with Treo 600 atm and it fits perfectly. slightly tight but it fits in my jacket pocket a lot better than any other cases that I've tried.
I have decided to give BB 71xx pouch a try. I had to stretch it a bit in order to get my qtek a nice fitting.
http://natt108.net/qtek/
I am also in a process of streching my treo 600 slip case with a pair of socks and will post some pictures tonight when I get home.
Does anyone have an IPOd 2/3rd Gen slip case? Can you please try and see if it'll fits nicely with your Wizard?
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
For those using the WIZA100 variant of the Wizard...
--
Got this case this AM. It is for the dopod 838 or VPA Compact II. So far so good my only gripe is that the case doesn't allow access to the messaging and ie buttons [when closed] and it is kinda slippery [maybe use it in tandem with a neck strap or handstrap]
--
They have one for the WIZA200 models as well
http://www.pdair.com/scripts/main/viewpda.php?pdaid=194&catid=9
Hi guys
Just received my ali PDair case - ordered Thurs night arrived this morning, outstanding service!! A great case too!!
Simon
I heard something about Aluminium cases and low gsm signal..
Are you having that kind of experience on your ppc ;
I currently have the Htc Wizard/ qtek 9100 and i am looking for a case.
Probably i'll go for the leather one.
no signal problems for me so far been using it for almost a week now... of course signal strength is also determined by your network coverage as well not only your device
Hi
Just checked on the signal stregth, one room in my house has a very weak GSM signal for Vodaphone and when using the PDair case it drops by 1 bar.
Must be shielding
Simon
Plastic screen cover
Does the aluminum case by PDair have a plastic screen cover to protect the screen like the Armor Case by Boxwave (www.boxwave.com)?
yep they have hard plastic screen
PDAir Case
Sabesh mentioned velcro in his review of the PDAir case. Does that mean there is some 'sticky pad attachment' to be done. The case says it closes with magnets, so I can't figure out where the velcro comes in unless it's to secure the handset. if that means sticking something on to the handset then I'm not so keen. i need to be able to get the handset out easily to fit in my car kit.
TIA, Davebo.
Hi all
I haven't found any topic about this case, so here it is:
I recently bought a Tuff-Luv Executive leather pouch for my HTC HD.
http://www.amazon.fr/Tuff-Luv-Execu...1?ie=UTF8&s=electronics&qid=1235746989&sr=8-1
It is quite good, the phone fits very well in it (the camera hole is a bit too low but it is ok anyway). the phone can still be easily to removed from the case.
And it is one of the few leather cases for that phone, that has a hatch that opens to the lower part of the phone (sorry, can't find the words in English, you can see picture) so this is appreciable.
everything is easy to access: stylus, usb port even when the case is closed , volume control, audio jack. Plus it is less expensive than Noreve and Proporta cases (probably not the same durability, but this I can only tell after a while, as it seems to carry on well for now)
So I would gladly recommend it. Anyone else has this case ?
Hope it works out for you. Looks like a pretty well made case.
I'm still trying a few different cases for my HD.
First was the PDA Air book style but it didn't take too long for me to get concerned the two plastic arms that holds the unit in the case are not that secure. The unit can slide and as it is also a belt clip case last thing I wanted was my new shiny HD sliding out and bouncing on the pavement. :-(
Currently have a two piece case of eBay described as "black rubber". Really more of a plastic than rubber and it will do for the short term as only a few dollars.
Today I ordered a Krusell Orbit case. Has the removable flap which covers the screen. I am hoping that with the main section of the case still on the unit it will still fit in the cradle I have. (My cradle has a bit of space around the unit which I hope will accommodate the case)
Your case look good too but the flap attached to the rest of the case at the base so wouldn't allow the unit to sit in the cradle.
Getting my TP2 tomorrow, but really wondering about this...
Seeing pictures of the leather 'case' that comes with the TP2 elsewhere than in the US, is it the same case without belt clip in the T-Mo US TP2?
If it is, I want to be ready when I pick up my phone to get a belt clip equipped case as well.
Yeah man... the US tp2 comes with a gay looking leather case that has no belt clip. It looks like you have a man purse imo
yeah a man purse that slides into your pocket
You guys weren't lying -- that thing is pathetic. I don't know what the heck HTC was thinking when they packaged that.
The T-Mobile guy was also full of crap when he said they had one with a belt clip. Looks like I'll be doing some shopping online.
Thanks for the heads up on that one!
yes the cases htc give are always junk. i like the bodyguardz skin cases simply because the phone is already kinda thick and it does protect the phone. kinda of a pain to put on but after my 4th attempt throughout the years i think i did my best on the touch pro 2.
nko, does the screen protector part feel rubbery and make the touch screen a little less sensitive? I know it is like that with the Zagg on my friend's iPhone.
Got this hard thick rubberized case at the tmo store. It comes with a snap in/out belt clip if wanted. Seems to fit tp2 very well, and leaves accessible all need openings.
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
i am still using the case my dash came with for my tp2, it fits.
I just bought me a $5 case with belt clip. I just have to cut a hole for the ear jack. I'm not spending $10+ for a case
freakingwilly said:
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
Click to expand...
Click to collapse
Yeah, I think I'm just gonna use the belt clip case that came with my Hermes. It's just a little longer but it fits for now.
Has anyone installed a full body screen protector like the bodyguardz ones? I saw this one on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370244520409&ssPageName=STRK:MEWAX:IT
But I bought this for the time being: http://cgi.ebay.com/for-HTC-TOUCH-P...ries?hash=item4399b91c94&_trksid=p3286.c0.m14 (from what I've heard, these pop off easily)
This is a very delicate process for me. It's a balance between too bulky and too little protection. I want it to be able to survive it's first dreaded drop without cracking the case. I may just try to use both of them at the same time. When I'm doing physical work, I'll put the rubber case on, and when I'm at the desk, just have it out with the clear protector. I just wonder if you can clip on the rubber housing over the clear protector. The perfect thing for me would be to just have a rubber skin that slides over the whole body of the phone because I don't slide the keyboard out much anyway. That way it could be protected when I'm on the move and I can easily take it off when not.
I also bought one of those generic belt clip holders for $5: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310161485996&ssPageName=STRK:MEWAX:IT I had one before and their alright. The loops on the back will secure the phone to you if you're moving around but the clip may sag overtime though. I know I'll be replacing it eventually. The HTC OEM cases are much better, but no loops. There's never a perfect solution.
BTW: Does anyone know if the rubber case from the Touch HD will fit?
^^Just ordered one of those this afternoon. Looks similar to one I had before but can't beat $5 and then about $.50 in cashback haha
i just bought the cellet holster for tmob tp2 from ebay for $9.99 and it is perfect.
Cellet Rubberized Elite Holsters is the best. the elite holster is made of a hard plastic that has a rubberized texture coating for extra grip and durability. When you insert the phone you will hear it "click" into place. Phone is ultra secure within the holster. You can press the release tab on the top of the holster to remove your phone. The belt clip on this holster is awesome. Clip will turn/lock in different positions. The clip has a slim profile so it will not extend far from your waist and bump into things. You can access the charger port, volume, memory, etc. There is also a cutout for the camera on the back of the holster. This holster is designed to fit the phone face-out but it will also fit face-inward. Attach to your side and always have quick access to your phone.
i did buy a week before this one, the bodyglove case and was very disappointed. the case dug into the side of the phone, was begging to take up the protective stickers on the keyboard, and was very bulky, and when clip to my belt stuck to far out. two thumbs down for bodyglove,,,,,
two thumbs up for cellet holster!!!!
roccotrisoliere said:
i just bought the cellet holster for tmob tp2 from ebay for $9.99 and it is perfect.
Cellet Rubberized Elite Holsters is the best. the elite holster is made of a hard plastic that has a rubberized texture coating for extra grip and durability. When you insert the phone you will hear it "click" into place. Phone is ultra secure within the holster. You can press the release tab on the top of the holster to remove your phone. The belt clip on this holster is awesome. Clip will turn/lock in different positions. The clip has a slim profile so it will not extend far from your waist and bump into things. You can access the charger port, volume, memory, etc. There is also a cutout for the camera on the back of the holster. This holster is designed to fit the phone face-out but it will also fit face-inward. Attach to your side and always have quick access to your phone.
i did buy a week before this one, the bodyglove case and was very disappointed. the case dug into the side of the phone, was begging to take up the protective stickers on the keyboard, and was very bulky, and when clip to my belt stuck to far out. two thumbs down for bodyglove,,,,,
two thumbs up for cellet holster!!!!
Click to expand...
Click to collapse
nice find.....i just ordered a different rubberized case for my Tmo TP2 but i may pick this one up as well. I agree with you about the bodyglove case. That thing has caused more harm to my phone than good (i.e. scratched keyboard and overall abrasive fit while it cradles the phone). given the pic above i'll def. have to check out the cellet holster.
one full day of playing around with it: IT STILL ROCKS. IT IS AS SOLID AS.... WELL A ROCK! LOL . great feel, and not bulky at all
yeah!thanks!!good work!
..........................
I think it's too exposed. (just a personal idea)
: )
what150 said:
I think it's too exposed. (just a personal idea)
: )
Click to expand...
Click to collapse
Oh yeah, I would never walk around with the screen exposed to the elements / harmful objects that could scratch, damage, or kill the screen.
you can flip the phone around to protect it some more the back of the case is cut out for the camera and speaker though, it has two small squares and a small rectangle
I currently have the Telus leather holster for my Touch Pro 2, however, I must say that this thing is a piece of crap.
I'm on my second one in ~3 months. The part that holds the clip to the holster just pulls off...
I wear the phone / holster constantly, so I need something that's going to hold up to wear-and-tear. It needs to be leather, it needs side in-and-out vertically (I've seen iPhone holsters where the iPhone slides in-and-out horizontally...which is terrible imo), and it needs to have a magnetically-attaching strap to hold the phone in place (the way I wear it, it's sometimes point down...don't want the phone just sliding out...).
To be totally honest, I LOVE the Blackberry holsters...the only thing I like about BBs, actually...
So if someone could suggest and preferably link to some high-quality TP2 holsters, that'd be great!
Thanks
It may sound silly but I have gotten my last two holsters (one for my tilt and one for my tilt2) at our local flea market. $5 for a leather holster with magnetic clasp with both a metal spring clip on the back and 2 belt loops. The nice thing about doing the flea market thing you can get a better fit in most cases.
You might check out Sena Cases or Krusell. They both make nice leather cases.
Any other suggestions?
>_>
The large pda Krussel case is the way to go. It also has a belt loop.
No sense loosing your device to a belt clip.
Only problem with it is you can't use the usb dongle.