Alltels new rom enabled picture messaging on my phone, but I'm not to happy with the rom.
I would like to go back to dcd's 6.1 rom but I would like to keep my picture messaging.
I thought I saw something where someone extracted all the added **** from Alltels rom, yet I cannot find it.
Americanmetal said:
Alltels new rom enabled picture messaging on my phone, but I'm not to happy with the rom.
I would like to go back to dcd's 6.1 rom but I would like to keep my picture messaging.
I thought I saw something where someone extracted all the added **** from Alltels rom, yet I cannot find it.
Click to expand...
Click to collapse
There has been quite a bit said about it. So far, i'm not positive if any Alltel user has gotten MMS to work. One of the threads is here and there are several other at the beginning of DCD's "Cooked Roms" thread or at the beginning of this 3.0.4 thread..i can't remember.
Americanmetal said:
Alltels new rom enabled picture messaging on my phone, but I'm not to happy with the rom.
I would like to go back to dcd's 6.1 rom but I would like to keep my picture messaging.
I thought I saw something where someone extracted all the added **** from Alltels rom, yet I cannot find it.
Click to expand...
Click to collapse
When installing the ROM do not add the Arcsoft 5.0.31.7 MMS. Add this MMS although it is not the new one it is the only one that I know that works.
Arcsoft MMS 3.0.26.12c
Server Name: Alltel MMSC
Gateway: mms.alltel.com
Port Number:8080
Server Address: http://mms.alltel.com/servlets/mms
Connection via: Alltel Wireless
Sending Size Limitation: 300K
WAP: WAP 2.0
Thanks I'll give it a try later on this week!
dwertz said:
When installing the ROM do not add the Arcsoft 5.0.31.7 MMS. Add this MMS although it is not the new one it is the only one that I know that works.
Arcsoft MMS 3.0.26.12c
Server Name: Alltel MMSC
Gateway: mms.alltel.com
Port Number:8080
Server Address: http://mms.alltel.com/servlets/mms
Connection via: Alltel Wireless
Sending Size Limitation: 300K
WAP: WAP 2.0
Click to expand...
Click to collapse
Yup. That is how I got mine to work.
Mine works as is with the new Alltel rom
I just want to go back to 6.1 with threaded ****.
All you need to do is install fresh with newest kitchen and dont check the arcsoft part. do not install that. then go to lennysh.com and install the arcsoft for alltell and you will be fine. I have ****ed with my phone as far as i can go and i have always had picture messagin. I have the newest arcsoft installed and my mms works flawlessly. I even can send over 300k limits.
silentjoker said:
All you need to do is install fresh with newest kitchen and dont check the arcsoft part. do not install that. then go to lennysh.com and install the arcsoft for alltell and you will be fine. I have ****ed with my phone as far as i can go and i have always had picture messagin. I have the newest arcsoft installed and my mms works flawlessly. I even can send over 300k limits.
Click to expand...
Click to collapse
How did you get arcsoft 5.0.31.7(newest) to work on alltel? Lennys version(the one I have..and only one I know about 3.0.26.12c ) isnt 5.0.31.7. So I was wondering what version you have that allows you to send over 300k? Not trying to doubt you and all but just very interested.
the newest version. i dont know why it does send over that limit. if i create a mms video or picture and hit send threw mms it loads it into the mms and will allow me to send. but sometimes if i manually put it in it says it over the 300k limit dunno if its a glitch or what.
silentjoker said:
the newest version. i dont know why it does send over that limit. if i create a mms video or picture and hit send threw mms it loads it into the mms and will allow me to send. but sometimes if i manually put it in it says it over the 300k limit dunno if its a glitch or what.
Click to expand...
Click to collapse
Can you supply the cab on lennys you used? thanks
i used the arcsoft from the actual website the lennysh one is like ending in .12c
Can you supply the link or cab for it?
FWIW I simply installed the 3.xxx cab from lenny's on top of the included version and it all appears to work. probably not a recommended practice, but if my phone explodes i'll be back to whine.
dwertz said:
Arcsoft MMS 3.0.26.12c
Click to expand...
Click to collapse
Link's dead
here's a link to the thread
I can receive messages but for some reason the message I send are not received by others
Americanmetal said:
I can receive messages but for some reason the message I send are not received by others
Click to expand...
Click to collapse
1st: When you installed the ROM you did not add Arcsoft 5.0.xx.xx correct?
2nd: Did you install the Arcsoft 3.0.26.12c cab or did you change it to OEM?
3rd: Did you check your settings and make sure they are below and they are set as the default?
Try to explain in a little more detail what it is doing?
Server Name: Alltel MMSC
Gateway: mms.alltel.com
Port Number:8080
Server Address: http://mms.alltel.com/servlets/mms
Connection via: Alltel Wireless
Sending Size Limitation: 300K
WAP: WAP 2.0
dwertz said:
1st: When you installed the ROM you did not add Arcsoft 5.0.xx.xx correct?
2nd: Did you install the Arcsoft 3.0.26.12c cab or did you change it to OEM?
3rd: Did you check your settings and make sure they are below and they are set as the default?
Try to explain in a little more detail what it is doing?
Server Name: Alltel MMSC
Gateway: mms.alltel.com
Port Number:8080
Server Address: http://mms.alltel.com/servlets/mms
Connection via: Alltel Wireless
Sending Size Limitation: 300K
WAP: WAP 2.0
Click to expand...
Click to collapse
1. Wasn't included in the rom's kitchen; I got the cab from
leary said:
here's a link to the thread
Click to expand...
Click to collapse
There^
2. I installed 3.0.26.12C
3.My settings are exactly what you listed.
Americanmetal said:
1. Wasn't included in the rom's kitchen; I got the cab from
There^
2. I installed 3.0.26.12C
3.My settings are exactly what you listed.
Click to expand...
Click to collapse
Try importing this into the registry, soft reset and test. If not then I would run sprite backup or spb backup and hard reset and just install the Arcsoft and see if it works. It should work without any configurations.
dwertz said:
1st: When you installed the ROM you did not add Arcsoft 5.0.xx.xx correct?
2nd: Did you install the Arcsoft 3.0.26.12c cab or did you change it to OEM?
3rd: Did you check your settings and make sure they are below and they are set as the default?
Try to explain in a little more detail what it is doing?
Server Name: Alltel MMSC
Gateway: mms.alltel.com
Port Number:8080
Server Address: http://mms.alltel.com/servlets/mms
Connection via: Alltel Wireless
Sending Size Limitation: 300K
WAP: WAP 2.0
Click to expand...
Click to collapse
Try Alltel.net instead of .com everywhere you see .com. This is what worked for me to get MMS working on my Alltell PPC 6800.
Related
Hi All,
After updating to the latest WMXL .2 i wanted to install all the operator settings from my operaters rom (3 Australia). ive been able to install all the .cab files but there are a few .cer.xml and .xml files that i have no idea how to install.
i have attaced the files as a .zip file
http://rapidshare.com/files/19956802/Hutch_3AUST_files.zip.html
i need some help in installing these files as i believe it will allow me to send MMS and recieve MMS as this has been a major issue with non-operator ROM's (even though the settings are right)
thank you in advance,
Drooch
drooch said:
Hi All,
After updating to the latest WMXL .2 i wanted to install all the operator settings from my operaters rom (3 Australia). ive been able to install all the .cab files but there are a few .cer.xml and .xml files that i have no idea how to install.
i have attaced the files as a .zip file
http://rapidshare.com/files/19956802/Hutch_3AUST_files.zip.html
i need some help in installing these files as i believe it will allow me to send MMS and recieve MMS as this has been a major issue with non-operator ROM's (even though the settings are right)
thank you in advance,
Drooch
Click to expand...
Click to collapse
drooch,
can you email these to me at the email address on my profile... ill have a look tonight for you...
would love to know how to enable 3mms on 3AUS too, ive been fiddling round with it all today - to no avail!
the new v.2 is fantastic, big ups to kyphur and the team..
im relaying information to aussie3g.com as developments...develop
/timmy
i have been trying to get 3MMS working since november last year. no luck as of yet. 3services and 3netacces work 100% but MMS is giving me the shi#ts.
I guess the dopod roms for Aus have the settings/certificates embedded in the ROM.
jasjamming said:
i have been trying to get 3MMS working since november last year. no luck as of yet. 3services and 3netacces work 100% but MMS is giving me the shi#ts.
I guess the dopod roms for Aus have the settings/certificates embedded in the ROM.
Click to expand...
Click to collapse
jas.... its not certificates...
i cannot see how privileged execution and SPC certificates have to do with MMS connections....
walshieau said:
jas.... its not certificates...
i cannot see how privileged execution and SPC certificates have to do with MMS connections....
Click to expand...
Click to collapse
you probably right, but who know how these tight a$$'s at 3AUS have configured their services.
I cannot send an MMS, but when I receive one, it wont download and will sit in my notifications bugging me to download, but it just wont. I called them up and asked them for the settings, I told them that I have a jasjam and they said they wont tell me the settings. Damn bastards, ive been with them since they rolled out in Aus, had 4 handsets with them, its not like they havent made their money from me.....
oh well, i guess i might switch to optus soon, my workplace has scored a nice corporate deal with them, for $15 a month you get 100mb quota for 3g data traffic. (much better then 3aUS's $5 for 10mb...lol)
lets see what happens.
jasjamming said:
you probably right, but who know how these tight a$$'s at 3AUS have configured their services.
I cannot send an MMS, but when I receive one, it wont download and will sit in my notifications bugging me to download, but it just wont. I called them up and asked them for the settings, I told them that I have a jasjam and they said they wont tell me the settings. Damn bastards, ive been with them since they rolled out in Aus, had 4 handsets with them, its not like they havent made their money from me.....
oh well, i guess i might switch to optus soon, my workplace has scored a nice corporate deal with them, for $15 a month you get 100mb quota for 3g data traffic. (much better then 3aUS's $5 for 10mb...lol)
lets see what happens.
Click to expand...
Click to collapse
as i said to dogeatdog01 best thing to do is just flash the OS.nb file of the 1.30 Dopod ROM and run the netwiz application and have a look at the settings
@dogeatdog01
are you going to flash the dopod rom to see the settings? if you do, please write them down and maybe we can make a cab file to ease the pain when we do rom updates....
I would have reverted back to the dopod rom but I dont have time to atm. well, i guess i am a hypocrit as for some reason, while working atm, i find myself on this forum.....
jasjamming said:
@dogeatdog01
are you going to flash the dopod rom to see the settings? if you do, please write them down and maybe we can make a cab file to ease the pain when we do rom updates....
I would have reverted back to the dopod rom but I dont have time to atm. well, i guess i am a hypocrit as for some reason, while working atm, i find myself on this forum.....
Click to expand...
Click to collapse
hahahaha im talking to him on msn atm... looks ill have to do it for you lazy ba**ards
walshieau said:
hahahaha im talking to him on msn atm... looks ill have to do it for you lazy ba**ards
Click to expand...
Click to collapse
you're a legend....
also, make the cab file too, and if you can, buy me some coke and ciggi's. lol
jasjamming said:
you're a legend....
also, make the cab file too, and if you can, buy me some coke and ciggi's. lol
Click to expand...
Click to collapse
hahaha keep dreaming b**ch!! thats what a mrs is for !!
hi All,
just letting u know that MMS is **JUST** working, not that good but it kinda works
mms sends, after a few times trying to send, but recieving mms is very difficult. using sned/recieve and u get an error Synchronising.
i dont really know whats wrong... these are the settings ive entered in
MMS
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
i would also like to get those reg. entries into the registry as, they seem to help with planet 3 (3 Australia content site) and they also look like they enter the emergency numbers too
Drooch
I've never had any problems with my Three settings, and I'm using XDA Live 0.20.1 with the settings. MMS sends and receives first time, without any errors.
My settings as follow:
MMS ***********************
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
3Mail ********************
Account Type: IMAP4
Incoming Mail: mail.three.net.au
Outgoing Mail: smpt.three.net.au
Domain:
Connection: Work
Connections ========================
3Netaccess******************
Enter a name for the connection: 3Netaccess
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3netaccess
User name:
Password:
Domain:
Advanced (nil)
3services******************
Enter a name for the connection: 3services
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3services
User name:
Password:
Domain:
Advanced (nil)
thanks walshieau and kevinbaker
i finally got it to work
i used a modem name "3services" with an access point name "3services"
Then the following settings
MMS ***********************
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
The 3AUS website stated that the connection should be via the "WAP NETWORK".
This didnt work so i tried the above but I dont have my WORK configured so i used connect via 3services. This works 100% now.
I cannot beleive it was that simple. I have been racking my brain everynow and then to get this thing to work.
Cheers.
jasjamming said:
thanks walshieau and kevinbaker
i finally got it to work
i used a modem name "3services" with an access point name "3services"
Then the following settings
MMS ***********************
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
The 3AUS website stated that the connection should be via the "WAP NETWORK".
This didnt work so i tried the above but I dont have my WORK configured so i used connect via 3services. This works 100% now.
I cannot beleive it was that simple. I have been racking my brain everynow and then to get this thing to work.
Cheers.
Click to expand...
Click to collapse
hahaha happy help a fellow melbournean... but i do recommend you transfer from that crappy network
walshieau said:
hahaha happy help a fellow melbournean... but i do recommend you transfer from that crappy network
Click to expand...
Click to collapse
the only reason why I use it is due to their $3 unlimited send/receive email pack. i forward all my exchange email to my 3mail and push it via imap.
cheap alternative if u ask me.
jasjamming said:
the only reason why I use it is due to their $3 unlimited send/receive email pack. i forward all my exchange email to my 3mail and push it via imap.
cheap alternative if u ask me.
Click to expand...
Click to collapse
hahahaa thats what i hear from everyone... well HSDPA gets switched on in 6 days for 3 in melbourne so there is more to cheer about....
I'm also using it for the $3 unlimited, also the $69 cap is pretty nice!
We've almost got enough of us here to have a Melbourne club .
jasjamming, how did you configure the push email? I've got mine setup to check every 15 mins from my Three mail (same as you; I forward my email to my 3mail) but I'd love to have push functionality.
I just installed yesterday the Altell ROM in my Sprint Mogul phone and everything look work fine except the MMS, thanks Olipro for your work;
I used this configuration:
Server name: Sprint
Gateway: (leave in blank)
Port number: 80
Server address: http://mms.sprintpcs.com/servlets/mms
Connect via: (here the Sprint is not available The Internet and doesn't worked)
Sending size limitation: 300kb
WAP: Select WAP 2.0
i had the same problem. find a cab on xda for arcsoftmms and install it. then soft reset. after resetting, uninstall the cab you just installed. soft reset again.
now go into your mms settings and set up a new default with the settings you previously used.
It worked for me. Give it a shot. I don't know what the arcsoft installation does that corrected my problem, but it's fixed and working perfectly
later
Im using the same settings and everything is working fine if is under 300k... anyone know hoe to increase the size? the drop down menu on show 300k.
Thanks!
Vertig0 said:
Im using the same settings and everything is working fine if is under 300k... anyone know hoe to increase the size? the drop down menu on show 300k.
Thanks!
Click to expand...
Click to collapse
i have mine currently set at 585K in the drop down menu.
it's just a registry setting you need to change
HKLM-SOFTWARE-ARCSOFT-ARCSOFT MMS-CONFIG-mm1-96352-
then increase the values for both the WAP1DefaultSize and WAP2DefaultSize
Later
utexascg said:
i had the same problem. find a cab on xda for arcsoftmms and install it. then soft reset. after resetting, uninstall the cab you just installed. soft reset again.
now go into your mms settings and set up a new default with the settings you previously used.
It worked for me. Give it a shot. I don't know what the arcsoft installation does that corrected my problem, but it's fixed and working perfectly
later
Click to expand...
Click to collapse
Hi, thanks for you answer, just a question what you did after uninstall the arcsoftmms because i don't see no more the MMS folder in my Pocket Outlook and the settings for MMS is there but you i can't see either where you can create one MMS Folder......well thanks in advance....
just wanting to make sure i'm understanding, you've already installed and then uninstalled the arcsoft, correct?
If so, then just access the mms setting and configure it with the information that was in the previous post. Once you've done that you should be able to go into your sms messaging and select "new mms" and that should be it
Any links to the arcsoftmms that you used?
cab file is attached.
again, i don't take credit for the file. i found it on xda i just don't remember where
later
utexascg said:
i have mine currently set at 585K in the drop down menu.
it's just a registry setting you need to change
HKLM-SOFTWARE-ARCSOFT-ARCSOFT MMS-CONFIG-mm1-96352-
then increase the values for both the WAP1DefaultSize and WAP2DefaultSize
Later
Click to expand...
Click to collapse
THANK YOU!!!
utexascg said:
just wanting to make sure i'm understanding, you've already installed and then uninstalled the arcsoft, correct?
If so, then just access the mms setting and configure it with the information that was in the previous post. Once you've done that you should be able to go into your sms messaging and select "new mms" and that should be it
Click to expand...
Click to collapse
Yes i did it, first time using a Arcsoft MMS that i have and one more time using the version you have but i don't any Folder in my Messaging (Pocket Outlook) after this but i using the HTC Home Plugin and when i hit the Message Button then i can see the inbox folder and selecting new create a message eith Pictures or Multimedia staff but when i hit send he start the like uploading (couting percentage slow depend of the size) but i at the end i got a message saying ... " Message could not be send. Unsupported message format, Operation failed!. Version cannot be supported......
so one second... we have to install and then uninstall the arcsoft one to make this work?
does anyone else think this is a silly way to go about it?
What does the installation do? its probably as simple as changing some registry settings.
Dishe said:
so one second... we have to install and then uninstall the arcsoft one to make this work?
does anyone else think this is a silly way to go about it?
What does the installation do? its probably as simple as changing some registry settings.
Click to expand...
Click to collapse
Actually there is a registry modification file to fix this without the uninstall staff...i found this in PPCGEEKS
yangers said:
I just installed yesterday the Altell ROM in my Sprint Mogul phone and everything look work fine except the MMS, thanks Olipro for your work;
I used this configuration:
Server name: Sprint
Gateway: (leave in blank)
Port number: 80
Server address: http://mms.sprintpcs.com/servlets/mms
Connect via: (here the Sprint is not available The Internet and doesn't worked)
Sending size limitation: 300kb
WAP: Select WAP 2.0
Click to expand...
Click to collapse
Those are the correct settings -- Connect via "choose alltel wireless" --
MMS should be fine after that. Its the same internet connection as creating your own Sprint connection.
yangers said:
Actually there is a registry modification file to fix this without the uninstall staff...i found this in PPCGEEKS
Click to expand...
Click to collapse
How do you apply this reg edit? clicking on a .reg file opens up RegEdit on the PPC, but alas, it doesn't actually DO anything!
Dishe said:
How do you apply this reg edit? clicking on a .reg file opens up RegEdit on the PPC, but alas, it doesn't actually DO anything!
Click to expand...
Click to collapse
Is just double click and will be added (modify) to your REGISTRY.........
I have tried all of these settings and still am not gettin mms to work. Everything is set corretcly. are there any new updates?
all yo have to do is change the server address to http://63.215.195.152 and it should fixx all of your issues
Since yesterday Sprint Arcsoft MMS hack has stopped working. It was working as of Sunday night. I have one MOGUL with ROM 2.17 and aother with GPS ROM 3.16 and both have the same issue.
I think its wide spread and was wondering if anyone else is also having same issue... any fix known of?
which version of the app are you using? i havent had any issues with it since installing it.
Currently I have the SprintMMS.cab that I got awhile back from PPCGEEKS. Its been working up until Monday.
The version showing is "MMS Composer version 3.0.6.22". I have tried the full server address "http://mms.sprintpcs.com/servlets/mms" and the updated one which uses the IP address instead "http://63.215.195.152/servlets/mms".
Any ideas??
i am using the secondary servers you posted and i have no issues...port is 80...wap2...connect via "the internet"?
I am trying different connection settings to see if thats the issue at hand. Just odd that others that I know whom have Moguls with same SprintMMS.CAB cannot send picture mail also.
Did you have the same version as I do? Same .cab?
yeah same version
damigs said:
Since yesterday Sprint Arcsoft MMS hack has stopped working. It was working as of Sunday night. I have one MOGUL with ROM 2.17 and aother with GPS ROM 3.16 and both have the same issue.
I think its wide spread and was wondering if anyone else is also having same issue... any fix known of?
Click to expand...
Click to collapse
I'm having the same issue, but I figured it was a glitch in the new ROM.
I have dcd's new rom and when I try to send a pic says it exceeds the 1k limit. I installed the cab for mms size limit on ppcgeeks but still doesn't work. What do I have to do to increase it?
SprintMMS Cab
Can I get that cab file you?
Yay 4 Juggs said:
yeah same version
Click to expand...
Click to collapse
Makes no sense then. What kind of device do you have? Also can you post the .cab your using?
Mine was working just fine and bam stopped. Wife has Mogul with 2.17 HTC ROM and her stopped working as well. I have 2 other Mogul friends and theirs also stopped working. I was able to send MMS just fine with 3.16 GPS ROM. So i know its no the ROM... atleast I wouldnt say it is.
pitcture mail
I have a touch with that cab and mine does not work either. A friend of mine has a mogul with it and they are saying the same thing you all are saying.
my sprint touch also fails 2 send pic mail..
Guys I think this is a bigger / global issue we are now seeing and dealing with. As we can see its not ROM related. What suxs is that Sprint has yet to come out with a valid MMS thus having us to hack this functionality.
Even the cheapest of the cheapest phones on sprint have MMS.. Sprint needs to get its act together..
For now I keep searching and trying...
Does anyone know if the MMS is not working for all of its sprint users or just the ppc's?
Just tried with NON ppc and it worked correctly. Sent to another non ppc. WOuld not sent to my mogul.
Update. Got error on other phone... not available. suspended application.
Anybody got there mms working in 3.16 yet? I just re-installed and I got nothing.
Just to add to the confirmation, mine stopped working at least as of yesterday (1/28/08), that was the most recent I tried, and it did work over the weekend.
Registry ack needed
KEY_LOCAL_MACHINE\Software\ArcSoft MMS UA\Config\UI
change the key, EnableServerEdit, from 0 to 1
open "messaging" -> "Menu" -> "MMS Configiguration"
settings used on server config:
Server Name: sprintpcs
gateway: left blank
port number: 80
server address: http://mms.sprintpcs.com/servlets/mms
Connect via: The Internet
Sending size limitation: 350k
wap: wap 2.0
kidnamedAlbert said:
KEY_LOCAL_MACHINE\Software\ArcSoft MMS UA\Config\UI
change the key, EnableServerEdit, from 0 to 1
open "messaging" -> "Menu" -> "MMS Configiguration"
settings used on server config:
Server Name: sprintpcs
gateway: left blank
port number: 80
server address: http://mms.sprintpcs.com/servlets/mms
Connect via: The Internet
Sending size limitation: 350k
wap: wap 2.0
Click to expand...
Click to collapse
Not sure why this is posted as cab already has this. This is not the issue we are having kidnamedAlbert.
just my 2cents
my mogul has been having problems the last few days as well....
I've tried the DNS hack posted on another board with no luck also
Has anybody been able to get the MMS working with Arcsoft on the Telus network?
does telus offer mms? if not try nuemms, mms over email
ya telus does offer sms.. but dunno how to get it to work.
same problem here mate.
what software does Telus use for MMS in it's stock ROM? If it's arcsoft, then I'd like to take a stab at helping get it working for you guys... i use Verizon but i am getting pretty good at getting Arcsoft to work for me.... What I need is your HKLM/Software/Arcsoft registry export from someone who is using the stock ROM and then the same thing from someone trying to get either Arcsoft 4.2.8.1 or the newer 5.XXX to work....
azclown said:
what software does Telus use for MMS in it's stock ROM?
Click to expand...
Click to collapse
Telus does not offer MMS for its WM phones.
So whos MMS servers are you using??
azclown said:
So whos MMS servers are you using??
Click to expand...
Click to collapse
We, on WM Telus phones, are not using any MMS servers. No ROM build for a Telus WM phone has offered MMS support and there remains no indication that Telus will.
I remember people having tried to hack MMS into WM through to Telus, but to no avail. It appears that Telus' business model is to segregate defined devices to specific features of its network. The locked mentatlity at Telus tends to treat WM devices more for business and data (web/email) than for a younger target who're motivated for text/photo messenging. I'm guessing a bit by what is not available and apparently locked out on the network.
That's the we way it appears to be. We can try to find the direct servers to see if it may work, but so far none that I know of have accomplished sending such messages on WM devices. Your network ID is associated to the model of phone that you have...
this really shouldn't be such a difficult task... i know it's been attempted many times before by many people but shouldn't we be able to just get the servers and other settings from a non-WM device that has functional MMS on Telus?
The only other issue I can think of is that i i recall correctly, Telus handles MMS in a different way than most other carriers. The last time I had a non-WM handset on Telus, MMS messages were handled via a text message with a link to a wireless web page where i could retrieve the message. It was a total PITA. Unless Telus has changed their network model for MMS, it won't be easy.
Everithing Work fine for me....
My MMS setting is to Telus MMS Network... If you wanna know how it work go on the telus site : http://www.telusmobility.com/clientcare/pcs_east/faqs/picture_messaging_faqs.shtml
It's cost about 25cent for a picture MMS and 50 cents for a videoMMS...
Wich it will help... Do you let's the custumization run at first boot And the Major question wath ROM are you running ...
So good luck
Alex_electro said:
My MMS setting is to Telus MMS Network... If you wanna know how it work go on the telus site : http://www.telusmobility.com/clientcare/pcs_east/faqs/picture_messaging_faqs.shtml
It's cost about 25cent for a picture MMS and 50 cents for a videoMMS...
Wich it will help... Do you let's the custumization run at first boot And the Major question wath ROM are you running ...
So good luck
Click to expand...
Click to collapse
How exactly did you get MMS to work on Telus?
I havew mannaged to get half of it working... sending messages, here's the thread with full instructions
http://forum.xda-developers.com/showthread.php?t=392284
To get MMS to work on Telus, the following must exist in your registry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"Domain"=""
"EnableRemoveCountryCode"=dword:00000000
"EnableSaveAudioObject"=dword:00000001
"FlixSlideCountLimit"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Telus MMS]
"WAP1RecvDefaultSize"=dword:19000
"WAP1SendDefaultSize"=dword:19000
"PacketSize"=dword:3E8
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"WAP2SendDefaultSize"=dword:4B000
"WAP2RecvDefaultSize"=dword:FA000
"WAPType"=dword:1
"GatewayPort"=dword:50
"MmscURI"="http://mms.telusmobility.com/servlets/mms"
"Gateway"=""
"Name"="Telus MMS"
"ISP"="Telus MMS"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Telus MMS"
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"Accept"="*/*"
"User-Agent"="Titan"
"Profile"="http://www.htcmms.com.tw/gen/Titan-1.0.xml"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2"
"Accept-Language"="en"
Also as stated in other threads regarding MMS on different carriers, you must add the following string to HKLM\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader
Code:
"X-Telus-MDN"="your 10 digit phone number"
gcincotta said:
To get MMS to work on Telus, the following must exist in your registry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"Domain"=""
"EnableRemoveCountryCode"=dword:00000000
"EnableSaveAudioObject"=dword:00000001
"FlixSlideCountLimit"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Telus MMS]
"WAP1RecvDefaultSize"=dword:19000
"WAP1SendDefaultSize"=dword:19000
"PacketSize"=dword:3E8
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"WAP2SendDefaultSize"=dword:4B000
"WAP2RecvDefaultSize"=dword:FA000
"WAPType"=dword:1
"GatewayPort"=dword:50
"MmscURI"="http://mms.telusmobility.com/servlets/mms"
"Gateway"=""
"Name"="Telus MMS"
"ISP"="Telus MMS"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Telus MMS"
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"Accept"="*/*"
"User-Agent"="Titan"
"Profile"="http://www.htcmms.com.tw/gen/Titan-1.0.xml"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2"
"Accept-Language"="en"
Also as stated in other threads regarding MMS on different carriers, you must add the following string to HKLM\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader
Code:
"X-Telus-MDN"="your 10 digit phone number"
Click to expand...
Click to collapse
These settings do not work at all on the Telus network
These settings do not work at all on the Telus network
Click to expand...
Click to collapse
These settings were taken DIRECTLY from the Telus carrier OEM in dcd's 3.0.4 kitchen.
gcincotta said:
These settings were taken DIRECTLY from the Telus carrier OEM in dcd's 3.0.4 kitchen.
Click to expand...
Click to collapse
That's nice, but that doesn't change the fact that they don't work. I'm on the Telus network, Telus has tried to disable picture messaging entirely on their PDA/smart phones. My solution that I posted works, at least for sending... I would really appreciate it if you coulld help me with it, because I'd like to beat Telus and be able to send messages as well.
Here's the post I mentioned http://forum.xda-developers.com/showthread.php?t=392284 .... I haven't been able to duplicate my results on arcsoft though
gcincotta said:
These settings were taken DIRECTLY from the Telus carrier OEM in dcd's 3.0.4 kitchen.
Click to expand...
Click to collapse
MMS didn't work in DCD 3.0.4... I should know, I tried to help him problem solve it. I believe the last piece to the puzzle, is missing header info.
MMS didn't work in DCD 3.0.4... I should know, I tried to help him problem solve it. I believe the last piece to the puzzle, is missing header info.
Click to expand...
Click to collapse
I really don't know what to tell you then as I'm not on Telus and know nothing about the status of their MMS.
Juicy47 said:
MMS didn't work in DCD 3.0.4... I should know, I tried to help him problem solve it. I believe the last piece to the puzzle, is missing header info.
Click to expand...
Click to collapse
I could use your help, dcd also shown interest in my thread... check it out please http://forum.xda-developers.com/showthread.php?t=392284
KazW said:
I could use your help, dcd also shown interest in my thread... check it out please http://forum.xda-developers.com/showthread.php?t=392284
Click to expand...
Click to collapse
KazW, I'm glad to see the work you've done... but I'm afraid the results of my best efforts can be found in DCD's 3.0.4 Telus Carrier settings (which don't work)
Juicy47 said:
KazW, I'm glad to see the work you've done... but I'm afraid the results of my best efforts can be found in DCD's 3.0.4 Telus Carrier settings (which don't work)
Click to expand...
Click to collapse
I'm well aware of your best results, you've managed to get arcsoft talking to the telus servers, I haven't for some reason, I believe that if you use the two addresses I list on the page that you maybe able to at least match my results, possibly go further... But I do doubt we'll be able to receive picture messages with telus
Also it'd be much better than my solution because the UI of the application doesn't quite "feel" as nice as arcsoft's.
I am having trouble sending a picture message through MMS. I installed this - http://forum.ppcgeeks.com/showthread.php?t=59412 - Arcsoft MMS. It now allows me to insert the pictures in my message, but when I go to send it it says:
"In order to send/download MM messages, the current active connection may be closed (this may affect other applications in use. Do you want to continue?" so I hit menu > yes.
Then is says:
Message delivery failed. Or Message receipt failed.
I am running NFSFANs Rom 111
anyone that can help?
GatorsUF said:
anyone that can help?
Click to expand...
Click to collapse
who is your carrier what/who's version of arcsoft did u install. did you check your settings?
Service: Alltel which is now Verizon
Version: SPRINT Arcsoft MMS 5.0.70.24. Threading MMS works! (Updated 3-2-09)
Cabs: Sprint Arcsoft MMS 5.0.70.24.cab and Sprint Arcsoft MMS 5.0.70.24-pm.cab
Neither version would work with my service, I have Alltel and the rls says Sprint, so that may be my problem. All I want to do is send picture messages. My phone can do almost anything I want but it can't send a picture message that my old Nokia from 3 years ago could do?
Thnx for the help btw
P.S. another odd bug with that Arcsoft program is when I go to check my emails and hit "Mark All as Read" it opens the Arcsoft settings...wierd...
ok so go to your inbox then press menu/mms options(may say pics and video options)/servers/alltel. if alltel isnt there just click on the default. if alltel is there and not the default-set it to default and delete others. then open the default. here is your settings.
server name: Alltel MMSC
Gateway: mms.alltel.com
port:8080 (try 8080 first if it doesnt work try just 80)
server address: http://mms.alltel.com/servlets/mms
connect via: the internet
send limit: i have mine set 100k currently
if you dont care to use an older arcsoft just install this it should work right from the get go. im pretty sure its calkulins. ive used it 4ever.
any chance you can get this app to work with the TELUS network?
That would be great if it worked for Telus...