Bluetooth GPS not working, HELP!!!!!!!! - P3400 ROM Development

I have flashed my Gene with the WM 6.0 ROM by mun_rus, everything was working just fine or lest say it was gr8 until lately
I have recently purchased the SatGuide GPS kit which comes with the navigation software , a few maps and a Bluetooth GPS dongle.
I successfully installed the software and the Maps but could not get the GPS dondle to work as it showed an error everytime i tried to pair it with my P3400 . and the instruction malual said that i should have a GPS port present n my cell. Currently my cell does not have the External GPS option under START>SETTINGS>SYSTEM. Earlier when i was on WM 5.0 , i used to have the GPS port.
Can some body help me!!!!!
My Rs.7000/- are on the stakes.

Related

NEW TOMTOM GPS DRIVERS 2.09 !!!

http://tt-uk.custhelp.com/cgi-bin/t...WRzb3J0PSZwX3Jvd19jbnQ9NzMmcF9wYWdlPTE*&p_li=
Hi,
I have upgrade to 2.09.
It works with TomTom, but I was unabel to use others applications.
So I went back to 2.08 and Towa´s solution
Regards
JoseF
Hi
Nothing prevents from using the 2.09 and Towa's patch I think!
For me everything works, with and without for the moment (tomtom, activesync ..)
I just tried this and it seems to work perfectly with my Socket BT GPS completely doing away with the need for Towa's patch. I deleted the pairing and created it again to be sure it was installed 'as intended' and then selected Bluetooth GPS device from the TomTom menu. Tried it 3 or 4 times and it seems to be working fine.

Rikaline GPS Receiver Problems

Please Help
I am trying to use the Rikaline 6010 GPS Receiver with O2 XDA PDA/Phone
Rom Version 3.17.03 ENG
Radio 4.21.00
I have sucessfully installed the USB drivers and tools. When I run comno.exe the PAD reports the COM port for the driver is 4. However if I run the test.exe and attempt to open port 4 it fails.
I have disabled Infared beams on the PDA. I have also done hard reset on the PDA removing all other software. In just installed the drivers.
All other GPS software fail to open PORT 4. Your help would be greatly appreciated.
Regards Richard
Problem solved. The GPS receiver does not require drivers..........

Anyone have 1.72 working with Alturion + BT GPS ????????????

What ever I try I can not get my Globalsat BT GPS working in Alturion 5.3 with i-mate 1.72. However I can see the responce of my GPS blue LED when I switch on Alt. with the correct com setting!
I tried e.g. hard-resets with/without WM installation of com5, with/without BTHTools installation of com7 and any combination (all with fresh Alt. installation, no other applications)
Beam "receive all incoming" is always off
TT3.03 however works fine in all conditions (installed after I try Alt.) with settings: SiRF Bluetooth/Bluetooth GPS
If anyone has Alturion 5.3 working with 1.72 ROM please let me know the details of your config e.g.:
- version of Alturion (I have 5.3.1.4 and don't trust some updates)
- BTHTools version/ port
- WM com port
- what GPS
- any special utils
or anything else you think is helpfull to try
Anyone knows if TT "SiRF Bluetooth/Bluetooth GPS" works via the serial port or does this somehow works differently???
Thanx for any suggestion.
Ronald
I have Alturion 5.2 and its working for me with bluetooth gps with noproblems where you get update to 5.3 i use without any utilits 1.72 suport serial com
MDA II T-Mobile
ROM 1.72.00WWE 03/15/04
Radio ver 1.14.00
Protokol ver 1337.24
ExtROM 1.72.126
GPS Bluetooth Blue-i
1.you hawe to pair bluetooth (com port 5 in bluetooth settings)
2.restart MDA2 and bluetooth
3install Alturion
4start bluetooth
5start Alturion and setup com 5 and its working for me
good luck
Thanx for the info lou
I have exactly the same ROM like yours !?. Is your "i-blue GPS" a SiRF II type?
The 5.3 upgrade you can download from www.alturion.com with this exe http://www.alturion.com/update/AlturionAutoUpdate21.exe It probably only works if you are a registered user.
Ronald
http://www.bluegps.com/
here its info about my bluetooth gps
I have 1.72 and Alturion PRO 5.3.
My Bt antenna is Emtac.
It works fine in this configuration.
When you make your connection to the BT antenna , do it through the bluetooth settings on your qtek where you activate the COM5 outbound. Then bond your device with the antenna.
it should work then.

My GPS isn't working after upgrade to wm6..HELP

Hi,
I've an AMEO, i tried recently to upgrade to WM6 here is what i've done so far
1. Unlock / SuperCID by the tool provided in the forum (Successfull)
2. Tried to use the SuperCID only Rom in the forum (here the trouble started)
With everytime i try to upgrade the update process stops at random points, i extracted the rom to check where does it stops and i found that it stops when i tried to flash the GPS.. i did succesfully flashed the whole rom twice but neither the Wifi or the GPS worked, and now i'm running it with the official release wm6 (27/7) but without the GPS.
3. Extracted the GPS and tried to Flash it through SD .. same thing.
any ideas guys?
i've been trying this for 2 weeks now .. what is the hell is wrong with this phone ..
NOTE: it works perfectly with the WM5 ROM
Try a different ROM Image...
run a tool called GPSviewer to check whether it can communicate properly with the GPS module.
Doesn't work
It defenitly not the rom as i used it on the other AMEO i've and it works perfectly, i usually use the SD update, and it shows where is the error and it is at the GPS update .. i get the error 00018003 in red color on the top of the screen and the GPS- ( FAIL ) during the update. i've tried all the rom in the forums and it does the same. I've tried to downgrade again to WM5 and it is the same issue the GPS isn't working anymore.. is there a solution .. it seems it can't write at that address i think 00018003 or something like bad blocks in the NAND! is there any fix for that?!
Experts .. i needd youuuuu
Try the SuperCID2 unlocker, then try reflashing.
Never heared about SuperCID2 !!! What is that, if there is something like that where i can find it?! i did search the forum didn't find anything
Thanks for helping

upgraded wm6 rom is not connect internet via bluetooth and usb

hai
i i upgraded my atom executive but unfortunatley (n.touch,and absusla new rom wm6.1 is not able to connect net via bluetooth and usb says "failure of modem" i tried 100 times kindly look after this problem solve as early as possible i like your n touch and new rom wm6.1 but again installed official rom

Categories

Resources