Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
Related
I have asked around before about getting the WM6 VoIP on this bad boy, and no one seems interested. The standard Cab files will not work, and it has been speculated this is because of some missing certificate files.
I know there are few out there with other devices that have the 6800 as well, and we can compare the certificate files between the two devices to see if we can get this working.
Certificate bypass...
Have you tried "unlocking" the certificate requirements through the registry?
The settings are available on the HTC WIKI here: http://www.htcwiki.com/page/P4000+Telus?t=anon and will allow programs/cabs to be installed regardless of certificate authentication. Bear in mind, this is NOT a method of unlocking the phone for another network, simply a means to dismiss certificate requirements for program installation.
I'm not interested in the VOIP per se, but if the certificate is the problem, this might be a viable solution... I hope it helps.
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
I have tried it too cannot get the today plugin to show....
internet calling just doesn't show up
webdude12 said:
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
Click to expand...
Click to collapse
all files installed, internet calling checked in today's settings, but doesn't appear on today's screen.
does anyone knows what's wrong with ppc6800?
Does anyone have another WM6 device that they have the VoIP Client working on. I think the key maybe a missing Registery setting, but dont have another device to compare too.
Look in this key:
\registry\HKLM\SOFTWARE\OEM\PhoneSetting\
I am guessing for something along the lines of: HiddenInternetPhone or HiddenVoip with a value of 0.
No "Internet Calling" on HTC P4000 (Telus)
I have the same problem. I installed WM6VoIP.CAB and SetupVoIP_v0.3.CAB, and setup access to the voip provider sip server (voipbuster.com). I was logged into voipbuster on my laptop, and as soon as I clicked ok from the "Setup VOIP" page, I received a message on my laptop indicating that I've been logged out of voipbuster because I have logged in from another computer. So, this means that Internet Calling is indeed working (or at least connected to the voip sip server), but just doesn't show up on the Today screen. I can see the "Internet Calling" option in Settings > Today > Items page, but "Internet Calling" does not appear in the Today page. It may be hidden or missing due to a registry key as the previous poster suggests. I have no idea what that key would be, but if anybody could look and see if you can find anything that would ShowInternetCalling, HideInternetCalling, or something similar in the registry, that would be much appreciated. Thanks.
VOIP works with no Internet Calling on Today Screen
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Now Working, just a few bugs
Ok I’ve got the WM6 sip client working on my phone (telus-p4000) the same way with all the same problems as sabrex does. I’ve tried many voip clients on this phone with the same speaker problem, I’ve read some where that the HTC api doesn’t reference how to access the earpiece speaker on the p4000. Believe me these other voip clients work on almost every phone with proper speaker output, it’s just the p4000 that routes the sound to the rear speaker. So what it looks like is the sip extension to the phone software is trying to use the default wm6 routing path there by pushing all the audio to the rear speaker instead of the earpiece. Now a work around like sabrex said is to use the corded external earpiece. I haven’t been able to get any Bluetooth headsets to work on any of the other voip clients but maybe someone will have better luck with the wm6 client. I don’t know much about sound routing in wm6 but any help with a direction to look in would be appreciated, but I think HTC will be the only ones capable of helping with this.
sabrex said:
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Click to expand...
Click to collapse
Has anyone been able to get the Today screen plugin to work with the P4000?
Hi All
Can anyone tell me where i can get hold of SetupVoIP_v0.3.CAB ?? Many Thanks!!
Where to get SetupVoIP
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Can you tell me how to di it from scratch? New Phone
i just got my Bell HTC-6800
Do I need to unlock it some how for this to work?
I have tried installing WM6VoIP.CAB and using SetupVoIP_v0.3.CAB to no avail.
Please post details of "no avail". How far did you get, any error messages?
Did you configure SIP using SetupVoIP?
- use Start / Programs / Setup VoIP?
- docs / support here
- did you set options to "whenever available", or "only if cell is not available"?
Which SIP provider are you using?
Are you using 802.11? Browser works?
When you view the phone screen, does the top left show VoIP (vs Bell Mobility)?
The Today screen doesn't work on my 6800, and I don't know how to solve it. I can place and receive calls, but the received audio is very quiet and comes through the handsfree (back) speaker. Headset is also very quiet (both wired and bluetooth). But when I'm at our remote mining areas I can place and receive calls.
Are you experienced with VoIP in general, and SIP in particular?
The whole story is in this very long thread:
http://forum.xda-developers.com/showthread.php?p=1590688#post1590688
got it working on bell 6800
gadzuk said:
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Click to expand...
Click to collapse
thanks for all the info here guys, i was able to get it working today on a bell 6800. im disappointed in the sound and features though. i have a nokia E70 and i use it's built in sip client which works will all the features of my asterisk PBX. i hope that this software will continue to improve.
Hi folks,
anyone managed to fix the audio problem on Titan ( P4000)
I get audio from the back speaher only
Thanks
back speaker audio
this is what i heard about the problem
Apparently HTC does not use standard Windows Mobile Audio paths on their devices as opposed to some of the other device manufactures.
This is word for word from HTC:
“It works on most other Windows Mobile devices because they more than likely use Microsoft standard audio path controls, HTC uses their own software architecture which is why it doesn't perform the same.”
Well, that sucks ...
They supply 80% of PDA phones to the market
and there is no work around it ?
My question, why is the sound quiet? Any other application that would put sound out would be normal volume. Why is the VoIP quiet then??
AGEphone Mobile 2 Speakerphone Edition does support the internal speaker on some select models (more to follow!) as of now!
Hey guys, I put this over in the regular titan forums, but I wasn't sure where it belonged.
I am wondering if there is any way to send all incoming calls to voicemail when I am using PDAnet to get online. I know there is a PDAnet setting to "allow calls when connected" but even if I uncheck this, calls still come through and discconect my internet.
The reason I'm posting this here is because if something specific to PDAnet isn't available, or possible, is there anything that I can do to the phone to not have incoming calls disconnect my internet connection? I had a Motorola Q for a little while, and there is a "bug" that actually does this automatically (sends call to voicemail while on EVDO). It was a setting in the DEBUG menu, in the field test option, called DDTM, and it was by default on (I think), and so people had to change that to off (could be switched) to allow incoming calls. It was perfect for me though. Now, I think I tried looking for a DDTM setting in the mogul and I had found it a while back, but I dont think it did anything with regard to my situation. So my questions are:
Is there anything with PDAnet that I can do besides the setting I talked about? Registry or something...?
If nothing with PDAnet, then does anyone know how to change the DDTM setting on a mogul? I got into the DEBUG menu (##33284#) and I didnt find any DDTM setting there.
Besides the DDTM setting (since it hasn't worked for me in the past) is there any other method you guys can think of that will do what I want?
Thanks!!
Call Filter
Yes there is There is a program called, Call Filter. you should be able to google it an find it.
SPB Phone Suite can also filter calls.
My understanding of call filter programs is that they screen the calls once they come to the phone and then prevent the phone from ringing. I would imagine this would still disconnect my internet services. I messed around a little with SPB phone suite, and I have nexvisions rom, which comes with Call SMS blocker (it has a call filter option). With SPB phone suite with the filter enabled, I couldn't even connect via PDAnet, it gave me an error 619 or something. With the Call SMS blocker, the program didn't block my incoming call at all, so that's more the program's fault. But am I mistaken in thinking that a call filter program would not work for my needs?
You don't need those programs to do it. Go to phone setting > Mode of Operation > change to EVDO only. This will automatically block all incoming/outgoing calls.
PS you might have to edit your registry if Mode of operation doesnt show.
I believe DCD's clean rom has it on his rom.
basian2001 said:
I believe DCD's clean rom has it on his rom.
Click to expand...
Click to collapse
Yes it does.
That does seem to work for my last option. But I cant receive any calls at all when in this mode, so I guess I would have to manually change this each time . Is there any way this entry can be automatically changed somehow with a script or a registry change? Also, this wouldn't work in areas without EVDO right? Since I'm disabling 1x, it would seem like it. So no software solution for this eh? Wierd how the glitch with the Q was perfect for me...
You are stuck with the manual fix tbh.
New IMPROVED CABS HERE
*********
WM6.5 and now WM6.1
*********Install on Fresh OS
Tested and flying on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K].
This time i have made single cab[sipConfig.cab] with Schap`s voip setup inbuilt. Hopefully 3g option will work with this cab as i have changed few settings. Tweaked is home screen item selection[select thru Available and selected to make cellular call or sip/voip call{one have to use classic home screen to do this}]. This cab is GSM codec based unlike previous cabs hence very low bandwidth is required to place calls, Can be used to make calls over GPRS but not sure. Quality of calls is .99/1 and no dropouts and one can call as long as credit available in account. What else, as this cab will integrate into phone system, it is very easy to use with addressbook, etc. I have attached audioswitch out file which if installed comes into action[can hear from earpiece] 13 seconds after phone window is active on screen, doesn`t matter calling or recieving. I have also attached SRS file just in case if someone hear less/low volume from earpiece just follow the instructions attached. Also attaced is Wifi always on file which some HD2 users need. Also 5060 port has been enabled in these cabs but you may need to forward 5060UDP port in your router for possible two way communication. Hopefully you guys like this cab, Please leave comments and suggestions. Thanks
Credits to developers.
*Most of the bugs has been fixed discussced in previous cabs.
Previous Cabs can be found here
--------------------------------------------
UPDATE : 1
DIAL PLANNew cab[sipConfigDialPlan.cab] with jaaps Dial Plan inbuilt. Both sipConfig(setupVOIP) and DialPlan can be accessed from Start Menu. Now one have the option to install with or without dial plan. Thanks
UPDATE : 2
GPSNow there will be no problem when using GPS [File Updated]
UPDATE : 3
START MENUOnly one instance of voipSetup shortcut in start menu
UPDATE : 4
WM6.1 SUPPORTNow WM6.1 OS supported just choose the cab with WM6.1 written in it, others are for WM6.5 OS.
UPDATE : 5
VOLUME INCREASE Tip By: angusc Thanks Now one will be able to hear bit loud sound either from back speaker or earpiece.
UPDATE : 6
OTHER CODEC SUPPORTNow all major codec supported ie: G.711 a-law, G.711 u-law, GSM codec.
--------------------------------------------
*RECOMENDED INSTALL LOCATION : DEVICE*
*DO NOT INSTALL ALL CABS, JUST INSTALL ONLY ONE YOU WANT*
*IF NOT WORKING OR GIVES YOU ERROR, THEN ITS OPERATING SYSTEM LIMITATION*
*DO NOT INSTALL WM6.1 CABS ON WM6.5 OS AND VISE VERSA*
*AudioSwitch.cab/WifiNoStandby.CAB/Tested SRS.rar cabs are OPTIONAL and can be installed on both WM6.1 and WM6.5 OS*
Will you eventually release a dialplan supported version? I know this is a nitpick but I really use that file alot.
Yes, working on it. But will take time as hard to get time off. Thanks
Any reason why I can't install this...
Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
try installing remove certificate or first cab in Tested SRS.rar attached to get rid of this warning. are you installing on fresh OS. Thanks
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
cu2cool said:
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
Click to expand...
Click to collapse
I think you are slightly confusing things, with voip you can make calls from anywhere as long as you have internet access. Now the free bit is different, you must have a voip provider and their fees may vary. Now if tmobile is giving away voip subscriptions with their wireless then I need to find out about that, but I have never heard of it!
@dhillonbros - Much love for working on this!
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
cu2cool said:
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
Click to expand...
Click to collapse
are you sure that its an integrated solution
No, I'm not sure. That's just what it looks like. There's a whole thread for it here http://forum.xda-developers.com/showthread.php?t=508715.
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
I installed todat without any errors. T-Mobile UK. The phone picks up my SIP landline service number but in the today screen after the no. it states no service.
I also appear to have two copies of the same software listed in my programs one called SetupVOIP the other sipConfig. Both on clicking setupvoip.exe
the dialer option page is blank.
looking forward to dumping fring but need a wee bit of help to get over the last hurdle.
this build is working better than older version on my Tilt. The issues I have are the dial plan, but I fixed that by editing the ipdialplan.xml file and removing all the number nines in it.
Second issue is that it looses registration after a while. I'm using AT&T 3G. Later on it is registered again but on and off throughout the day.
Installation ok but no voip on HD2
Hello,
The instalation is gonna well, but i have only the configuration tool, no additional items in today screen or phone menu, how can i switch between voip and standard calls?
br
nobisz
The configuration tool is used to set when your call will go through voip ("never", "whenever available", ...). From there it works transparently. For example, if you set to "whenever available" all calls will go through VOIP if it is able to register to the VOIP service, otherwise they will go through your cell network.
in the configuration tool, should I select TCP or UDP? I am using 3G
cesierra said:
in the configuration tool, should i select tcp or udp? I am using 3g
Click to expand...
Click to collapse
udp is the best option
@amcclean : Please try new cab. Problem fixed
interlope said:
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
Click to expand...
Click to collapse
Mines flying on HD2, same as registrar server.
In Polish version of WM 6.5 you shall add "telefon" in command.txt file (Program Files/audioswitch) for the AudioSwitch to work....
Just wondering if anyone has any experience with using microsoft sync with the fascinate. Im having trouble getting the bluetooth calling functions working. When I first got the vechile I was running froyo and could make and recieve calls no sweat but since upgrading to gingerbread when I try and make a call using the voice commands the call ends 1 second after the call is placed. Also when a a call is coming in the answer button does not work, if i grab the phone and slide over the answer button the call will then work through the bluetooth. I have updated the sync to the latest version off the microsoft website. Also the exact phone im using is a rooted Telus sgh-t959d. Any help would be really great, thanks!
Have you tried settings-> applications-> manage applications, highlight "all" in the top of the screen, navigate to nuisance voice command (or whatever the official apps name is) and hit clear data...you may have to re setup a few things but its worth a shot.
Sent from my SCH-I500 using XDA App
hmm the only thing in there with voice attached to the name is the voice dialer and voice recorder. I cleared that, give it a try I guess
Well I managed to get it to work. It seems that juice defender was messing with it. When my phone was not active it was turning off the radios so I think that was the problem. Thanks much for the help!
I have been having trouble with my Note i717 voice dialing over Bluetooth. I pair it to my Pioneer DEH-P710BT care stereo, transfers phonebook and works when dialing with phone manually or by selecting name on deck.
My problem is with the voice dialing from the deck. I say the name but it keeps selecting a wrong name/number for each name I say. It will have the same wrong name for one name that I say, no matter how many times or clear I say it. It will give a different wrong name for another name that I say. I have tried saying last name before first name as well and it still doesn't select the right name. It feels like its just translating it wrong into text since it keeps selecting the same wrong name for each specific contact???
I had the same problem with my Nexus S. The exact same setup works fine with my Galaxy S2 i9100, HTC Nexus one and LG GW620. They all call the correct name.
-I have no lockscreen lock or password
-I have tried google voice search and Vlingo as default voice input
-Listen via Bluetooth is selected in Vlingo (tried without selected as well)
-Phone & Media profile are selected in the bluetooth settings for the deck
I am hoping there is a fix and its not some compatibility issue with certain samsung phones and my Pioneer deck. So far only 1/3 of my samsung phones work.
Anyone else have this problem? Ideas? thanks
How did you change between voice search and Vlingo as the default voice input? I have similar problems with voice dialing on a number of android phones and I'd like to try some other programs to see if it's a software fixable issue, but I can't get the phone do launch anything but Vlingo.
hausman said:
How did you change between voice search and Vlingo as the default voice input? I have similar problems with voice dialing on a number of android phones and I'd like to try some other programs to see if it's a software fixable issue, but I can't get the phone do launch anything but Vlingo.
Click to expand...
Click to collapse
Settings/Voice input and output/Voice input/Voice recognition
I have the Rogers Canadian SGH-I717R.
Changing that setting on the AT&T version does nothing, unfortunately....vlingo always picks it up. Oh well, was worth a shot since I've had better luck with cyberon voice commander.
Same issue here. At first I thought it was my car 2012 Hyundai Sonata. Deleted contact list out of the car a couple of times and tried pairing multiple times. The GNote pairs fine but gets the wrong name frequently.
Mine gets the wrong contact all of the time.
Doesn't anyone else have this problem?
Sure...had that since my first Android handset. So I started using Cyberon, which works better and has a confirmation mode (since I got tired of Android ringing up some bagel shop in Hoboken every time I tried to call my mom - I live in California BTW), but the Note doesn't offer the ability to have the bluetooth multi-function button start any app other than Vlingo, which doesn't meet my needs because it doesn't work through the phone lock screen when my phone is suspended.
If I'm going to have to pull the phone out of my pocket, unlock it, and then voice dial, what's the point.
WM6.5 had this functionality working beautifully in about 2007.
hausman said:
Sure...had that since my first Android handset. So I started using Cyberon, which works better and has a confirmation mode (since I got tired of Android ringing up some bagel shop in Hoboken every time I tried to call my mom - I live in California BTW), but the Note doesn't offer the ability to have the bluetooth multi-function button start any app other than Vlingo, which doesn't meet my needs because it doesn't work through the phone lock screen when my phone is suspended.
If I'm going to have to pull the phone out of my pocket, unlock it, and then voice dial, what's the point.
WM6.5 had this functionality working beautifully in about 2007.
Click to expand...
Click to collapse
Odd... are you saying you can't voice dial thru your car's BT without physically unlocking the phone?
I can voice dial just fine (locked & unlocked) on mine through the Ford Sync in my car.
Sent from my SAMSUNG-SGH-I717 using XDA App
Are you screen locked or password locked? I haven't tried it in my car yet (don't really need to as my car can read the phone book and I can dial by touch), but Vlingo will not respond to my bluetooth headset at all when the phone is PIN/password locked.