Related
[size=+2][APP][Update 2009/04/08] SSMaHo 0.0.4.0 [/size]
Guys
I reimplemented the old SSMaPa. completly new technology.
There aren't many new features till now, but the new architecture allows further changes..
some new features
- differing between mail and sms now possible
- added some new replacements
- landscape mode fully supported
- should be working generic on all manila versions
I also added gsgetfile.dll as default file chooser for ssmaho
How to use:
- if you was using old ssmapa, do first a 'full restore' in ssmapa!
- Extract all 4 files and copy them to a folder on your phone (the folder has to stay on the phone.. I recommand /programs/ssmaho)
- run ssmahogui.exe
- click on the first button
- click on load configuration
- click on "Start INIT-Assistant"
- There are two modes, prefer the fast init, only if this is not working, choose the manila file from the slowinit box. Click on Fast Init (or maybe slow init)
- There should appear something like: "CreateProcessW offset found: 0x002d4240, ..." If that's not the case and "unknown exetype" appears, then use slow init.. In some cases you have to click 2 times... If this isn't working too, then sorry, ssmaho will not work on your device.
- click close
- click on "start assigner mode"
- minimize ssmaho (click right top corner, fast, or start -> today)
- Go back to manila
- click on every element you want to replace in manila
- there should pop up a window 'Assigner'. enable in minimum following checkboxes: Active, EXE Name, all News
---- Match condition commandline is useful for hooking sms inbox and mail inbox
- with the button "..." choose the new file
- click ok
- assign as many as you want.. windows are not working, but there are more than in ssmapa.. also landscape alignment should be working
- when you're done go back to ssmahoGUI and click on "Stop all".
- go to shortcuts, I recommand enabling all...
- click on "Save Configuration"
- click on About (or don't do it )
- close the program
- You have under programs new shortcuts: SSMaHo Attach / SSMaHo Detach. click on "ssmaho attach" and the new programs get called when working with manila.
--> You have to execute the attacher everytime manila crashes. If you use autostart it should automatically attaching after softreset, but not after a crash.
I don't think that this tool is able to destroy something on the phone. Never mind, I'm not responsible for any damages.
[size=+1]Upgrade instructions[/size]
1. copy all the new files to the same directory
2. Click on "Install new HookerDll"
2.1. If this fails, click on "Load Configuration" -> "Stop All"
2.2 Reclick on "Install new HookerDll"
3. ReDo the initialisation. You should use FastInit. There should appear 6 offsets
4. Ready.. You can now use ssmaho...
With version 0.0.3.0 I implemented a real inline patch (hooking a function of manila). a generic solution for smt. like this is heavy... theoretically it should work (tested on a rhodium and old manila)... but as soon as htc changes smt deep, it won't be working anymore..
[size=+1]Tricks[/size]
- Everytime the first button is available, click it... you'll then have lesser "where the hell"-messages
- if you have problems with one function / one hook, deactivate it with "manual configuration"
[size=+1]Important[/size]
- The new inlinefunction-hooking of manila can only be searched with fast init. Also, fast Init isn't as fast as before, because it has to search more data... be patient after clicking on it..
Please donate for me! I'm a apprentice and use a lot of my free time for working on the computer, to be able to create such tools.
[size=+2]Thank you [/size]
Received Donations:
15 Euro - 28wagram - 2009/05/13 - nice, thank you
10 Euro - ppc3300 - 2009/04/07 - thank you
10 Euro - lacasi - 2009/07/23 - thank you
10 Euro - Martin L. - 2010/01/02 - thank you
5 Euro - juwenio - 2009/04/03 - thank you
5 Euro - Trident - 2009/04/09 - thank you
5 Euro - mpayne - 2009/06/11 - thank you
5 Euro - 1swat - 2009/06/25 - thank you
5 Euro - aussiebum - 2009/08/02 - thank you
5 Euro - plerche - 2010/02/23 - thank you
Changelog:
Version 0.0.4.0 (2009/04/08)
- Improved slow init. ssmaho now fully working on all devices where manila.exe isn't read-accessible (file is fully readable in ram )
--> Full support for Dutty 2.6 xtreme !
- added crash handler
--> on new phones, evertime manila crashes (not restart, crash) ssmaho gets reattached automatically. This feature is like all other event-based and not polling anything..
- fixed some bugs
Version 0.0.3.2 (2009/04/06)
- Removed exe limitation.. all filetypes are now supported
Version 0.0.3.1 (2009/04/05)
- ssmapat2hook.dll doesn't get removed after install
- improved --with-wait function. probably it helps, probably not..
- filename is no more case-sensitive
- last filename will be shown in fast-init box
- change on assigner: clicking to cancel will do the original action, clicking Ok will supress it
- added architecture for an external api interface (if your're interested, contact me)
- added new patch (only for developer usage, on page change)
Version 0.0.3.0 (2009/03/28)
- After hours and many evenings of work, I am proud to present the new ssmaho-version!
- Added special-infile-patch, hooks every subview of manila.
- Rhodium calendar / Call History and much more gets triggered (altough, on old manila versions, call history isn't hookable)
- bugfixes, autosave, ...
- added manual offset changer for professionals
Version 0.0.2.0 (2009/03/19)
- Added new hook (click on sms / mails / maybe rhodium calendar)
Version 0.0.1.0 (2009/03/16)
- First official release
- Thank NLS and hanackin for their patience on beta testing
P.S. Excuse me for my english...
[email protected]
Thanks a bunch, Svenso... I am a long time SSMAPA user, and I am very happy to see this new app.
So will this prog allow me to have wmp open instead of tf3d music player when i touch the music tab in touchflo? also will this software work on the new manila?
cheers
That´s indeed nice improvments. The question is if this app supports the upcoming "XBmod Manila Rhodium port". If it is you´re my hero!!
Really cool tool. I hope that no bugs will be found.
Hmm, previous version of this tool used manila's files patches, I suppose, but now we have to check an autostart option... that means that you patch manila in the RAM, but not the file. Does your app hang in memory or it starts after a soft reset, patches and unloads?
Testing now... not sure if I am clear on what everything on the pop-up assignment screen does.
*edit* Ok, I think I've got it. I have successfully mapped the "time click" on XBMod's HD manila.
If I click on the call history button it brings up the call history instead of bringing up the assignment screen. I'm assuming this element cannot be mapped?
Yes unfortunately you assume correctly.
But SSMaHo is a better base to develop on, anyway.
NLS said:
Yes unfortunately you assume correctly.
But SSMaHo is a better base to develop on, anyway.
Click to expand...
Click to collapse
I'm already loving it. The fact that it works on the HD manila is wonderful.
*edit* How does the "differing between mail and sms" work? If I click on the "all messages" button on the sms tab will it just remap this button?
Hi,
Thanks a lot for all your effort with this tool. It's a great idea and hopefully it'll work on my device in one of the next versions. Stumbled upon your tool yesterday and read the whole thread of the previous tool, and now tried this one. But it seems there's still something going on with this manila version, your tool doesn't like.
When I press "Start Assigner Mode" I get a popup saying "thats bad. Proc not found -.-"
I'm using a new HTC Touch Cruise (09). It already features the new "Footprint Tab". In case I can send any file to you to help, please don't hesitate to ask.
Until then: good luck with your exams!
What you mean a new "HTC Touch Cruise"?
Unless I miss something Touch Cruise is an old (obsolete) model...
change music player?
Ok i searched the old thread (alpha version) as well and found no answers as to whether this software could replace the manila music player in touchflo.
Could someone please confirm or deny whether its possible to change it to say windows media player?
thanks in advance
Why don't you just try?
i tried using it on the rhodium port but it doesnt seem to work :-\
im just following the instructions and it cant initiate the manilla.exe properly
great work none the less for the HD manilla! =D
sayazs said:
i tried using it on the rhodium port but it doesnt seem to work :-\
im just following the instructions and it cant initiate the manilla.exe properly
great work none the less for the HD manilla! =D
Click to expand...
Click to collapse
The Rhodium port is probably manila2.exe. Haven't tried it yet, I'm just guessing.
NLS said:
Why don't you just try?
Click to expand...
Click to collapse
Because I'd like to hear from others who have tried it first and hear about their experiences in case theres a major problem or other.
And now with the above posts i now know that it doesnt work with the new manila and therefore i dont have to risk messing up anything on my phone.
Hoping in the future that Rhodium/Manila2 is supported as it looks like a great app!
Cheers
This application cannot mess anything with your device.
Try to manually attach first, see if it works, then choose to autostart.
I've try it in my jade ( aka touch 3g ) and works perfectly !!!
i replace time link with better g-alarm !!!!
tnku very much.
Many thanks.
I've tried in my HD with Manila-Rhodium (Dutty exreme 2.2 ROM). After Start Assigner-Mode there isn't any pop up window
Any help.
Thanks
Not working at my Touch HD... My current ROM is Touch of HD v3.4.1 and when I click at Start Assigner-Mode it gives back the error: Master failure. where the hell you put my dll in?!
I placed all the four files in a folder (named it SSMaHo) at the root of the phone!
Hi All,
I've made a simple application, that creates the link to any file/application and then puts that link to Windows\Start Menu\Programs or any other selected by You folder...
I've noticed that when using TouchFlo3D, you can't just add to Program Tab any link, any program, there is no browsing option, link has to be in Start Menu Folder. Making links with notepad or Word is not an easy / simple thing, that's why Link Creator was made ... to make life simpler
discussion and attachment in main thread (on Diamond board )
XDA Thread
Version 1.5
fixed:
1) Support of WVGA now it's more finger friendly
2) Additional shortcut to explore and manage special folders
3) Bigger Fonts ! better accuracy in choosing folders / files...
4) no automatic softreset after changing manilla softkey (it was very annoying)
- minor changes...
Version 1.4
added:
1) Save as Manilla Softkey (Left and Right Softkey, and it works very well with arguments - so now creating link to for ex.TouchLockPro with additional LOCK argument is very easy...)
2) Create URL/Mail - now You can create mail or www.* link and put it to whatever you want place - it uses default - signed to specified type system program (for browsing www and creating emails)
fixed:
1) exception when file doesn't exist (in selecting File and clicking OK) - now if everything is all right OK button will be colored to Red otherwise you will be promped with msg.
2) installation problem with adding shortcut to Link Creator to the Start Menu\Programs - now it's fixed (on not WWE Roms for ex. Polish Roms there was problem with it)
3) in 1.3 version link additional argument was added under inverted commas (1#"\FOLDER\program.exe argument"), now it's fixed (added checkbox "argument outside inverted commas" for default it is checked... and now arguments are after commas - so we get sth like this: - 1#"\FOLDER\program.exe" argument - and it works
4) added space (****.exe"_) while saving link with argument (so now, there is no need to type additional one blank space in arguments textbox)
5) fixed all "Save In..." problems "Folder doesn't exist"
6) Key Mapping Problems solved
7) some layout changes.
to do:
1) setting icons
2) editor for created link
3) soft keys for System
4) saving with UTF-8 for speciall chars like ś, ą, ę... others
5) make program more finger friendlly - bigger scrollbars, dropdown lists etc.
Version 1.3
Changes:
1) changed "Select File to Link" explorer: short directory listing for better navigation
2) changed "Save in Selected Place" explorer: short directory listing, for better navigation
3) changed Menu style
4) added "Manage Links" - an explorer that gives you ability to find any link files (supoorted filters are: *.lnk, *.lnkbak, *.*) on your PPC and then you can rename, delete, or delete them (by changing it's extension (*.lnk -> *.lnkbak) )
5) added fingerfriendly popup menu for "Manage Links" (-Close-)
6) added "Save as Key Mapping" - special in Windows direcotory filename creator, that gives You ability to map some Hardware Keys with your "files" (Long Press Send Button, Long Press Power Button, Short Press Power Button). There are two options for Save as Key Mapping: a) saving special filename, b) deleting special filename.
Version 1.2
Changes:
1) added "auto counting chars method"
2) removed .net openfiledialog
3) added my own "explorer" for searching "to be linked file"
4) excluded System.Windows.Forms.dll (back to very small size of cab installer 12KB)
5) some "label" changes...
version 1.1:
Added:
1) file filtering: all files, exe, jpg, bmp, png, mp3, wav, avi, mp4, wmv, txt, pdf, doc
2) changed caption Select Exe to Select File
3) new Menu Options:
- Save in Programs
- Save in Start Menu
- Save in StartUp
- Save in Selected Place
- Close
4) included System.Windows.Forms.dll for same openfiledialog on every .net platform... (I guess )
(thanks to Mieszko Zagańczyk from SmartMobile.pl for testing and noticing problem with filtering and different open file dialog on his Touch HD)
version 1.0
first release
Thank you very handy app
Great app, thank you very much
Had tried to install this a couple days ago (found it at another site) but couldn't do so because 3.5 framework issues. Any chance of getting this using 2.0?
nice app!ThX for Sharing!
new version 1.4 released
new Version 1.5 released
PlayIt! v0.50
Titanium Music Player Control [Mar-18-2010]
PlayIt! is a Windows Phone 6.5 Titanium plugin to control and display the status of S2P or Nitrogen.
PlayIt! is the continuation of CS2P.
Uses TICS (Titanium Installator Controller Saver) installer for Titanium by MichelDiamond
http://forum.xda-developers.com/showthread.php?t=564884
Thanks
The original author of CS2P, chriscsh
MichelDiamond for s2pcheck.exe and nitrogencheck.exe
German locale file by der_Volki
French locale file by archidune
Requirements
WM 6.5 Professional with the Titanium (CHome) interface
A music player installed and working correctly
Supported Players:
S2P v0.72-beta or higher - http://forum.xda-developers.com/showthread.php?t=556885
Nitrogen v1.2 or higher with "Write current song info on registry" enabled in settings - http://nitrogen.wmskins.com
Mortscript 4.2 (Works with 4.3b as well) - http://www.sto-helit.de/index.php?module=download&entry=ms_program&action=list
JMLPanex v2.30 or higher - http://forum.xda-developers.com/showthread.php?t=552373
Works on all resolutions [S|Q|W|VGA], default skins are supported as well
Installation
Extract the contents of the Zip file to your hard drive.
Copy the CAB file to your device.
On your device, run any File Explorer application; go to the folder where the
CAB file was copied to; run the CAB file.
PlayIt! will be installed, you may set up the plugin at any time.
NOTE! If CS2P was installed previously, the install will kill and delete the 24/7 script that was running when it was installed
You should uninstall CS2P when using PlayIt!
Operation
PlayIt! enables a registry change notification (s2pcheck.exe, nitrogencheck.exe).
They monitor the status of S2P and Nitrogen and update the panel.
This means no script is running 24/7.
The plugin has 1 page/panel
There are 4 buttons on the panel
Previous
Play/Pause
Next
Open Player (CPlayer skin uses album art for this button)
Right softkey will activate the menu
Each button functions differently when the player is running or not running
Not Running
"Previous", "Play/Pause", or "Next" starts the player, then minimizes it (configurable via menu)
"Open Player" starts the player, does not minimize it
Running
"Previous", "Play/Pause", or "Next" are what they are
"Open Player" opens the player window
Settings
The behavior and look of PlayIt! can be altered by accessing the Menu, via the right softkey.
Access the settings via the "PlayIt! Setup" submenu.
The current value for each setting is shown in parenthesis.
Player: Set the music player for PlayIt! to control
Skin: Change the skin
Vibration: Enable/disable vibration feedback
Minimize Player: Enable/disable minimizing Player when it's not active
Language: Change the language
Refresh Titanium: Refreshes/reloads the Titanium interface in case of glitches or errors
About PlayIt!: Displays information about PlayIt!
Instructions for Locale Zip Files
Extra and updated locale files will be available here between releases of PlayIt!
I will include new/updated files on every release.
To use these files, extract the .ini file to the PlayIt/locale/ folder, then click [Menu -> PlayIt! Setup -> Language] to select the new language
Screen Shots - Default Skin (VGA) (v0.50)
Screen Shots - CPlayer Skin (VGA) (v0.50)
Screen Shots - Menu/Settings (VGA) (v0.50)
Default Skins (should) work in all resolutions and may differ slightly to fit each resolution.
Change Log
Code:
--[0.50]----
* Added CPlayer skin, a minimal skin showing only inside the Titanium bar
o Thanks to derby00, creater of CPlayer, for letting me use the skin from his player
* Added current Album name for Nitrogen, uses the AlbumArt path for this info
o This depends on the current track being inside of a sub-folder including the album name
* Reworked the setup screen, it is now a menu, you can also control the player via this menu
o Added Close Player, which will close the active player
* Added about screen, for displaying PlayIt! version info and url to the forum topic
* Sped up the setup menus a bit
* Changed how players are handled
o New players to control can be added via a new directory in the players directory
o player.ini: Metadata and command controls
o install.mscr: Install script, sets up the player control for use in PlayIt!
o uninstall.mscr: Uninstall script, used to remove registry entries or files that the install script added
* Consolidated player control scripts into one file, PlayItControl.mscr
* Added dynamic player switching
o If you open another player that is not set as default in PlayIt!, the default will be switched to that player
* (Nitrogen only) Added TimeTotal, TimeElapsed, TimeRemain, and ProgressBar
o These can be used to display time information for the current track
o Default and CPlayer skins both have a progress bar and timers
* Fixed (maybe) red X for no album art.
* Adjusted the default skin a bit, adjusted minor positioning issues
For a more complete history, look at History.txt in the zip file
To-Do
Allow name of the panel to be the name to the current active player or a user input value
Fix skin changing while the player is open and running
Fix hard-coded image paths in default skin
Is SQVGA (320*320) working ok?
Volume level
Other ideas are welcome
Skin Support
PlayIt! supports skins
You can change the skin from [Menu -> PlayIt! Setup -> Skin]
Add a new skin
Create a new directory (or copy default) in the skins directory
Create a skin.ini file
This is an information file for the skin
Create a skin.plg file
This is the layout file for Titanium
Some image file names must be the same as default for skins to work correctly
blank.png, cPause.png, cPlay.png, Next.png, NoCover.png, Pause.png, Play.png, Player.png, Prev.png, repeat_1.png, repeat_music.png, repeat_off.png, repeat_on.png, shuffle_off.png, shuffle_on.png
Certain ID attributes in the .plg MUST stay the same for the button detection and text updates to work correctly
<Layer ID="PlayItExpanded"><Layer ID="Page">: RewindImg, PlayImg, NextImg, PlayerImg, AlbumArt, Repeat, Shuffle, TEXT1, TEXT2, TEXT3
<Layer ID="PlayItCondensed"><Layer ID="Page">: PluginLabel, Title, PlayImg, TEXT1, TEXT2, TEXT3
For ID="PlayItCondensed", you can either use PluginLabel to show "playit" all the time, or use Title to show it only when the player is running
Copy the new skin directory to the skins directory and run Setup to change
Multi-Language Support
PlayIt! supports multiple languages
Just about everything in PlayIt! is localized
You can change the language from [Menu -> PlayIt! Setup -> Language]
Adding your language
Copy PlayIt_en.ini in the locale directory and rename it for you language code
(Ex. rename PlayIt_en.ini to PlayIt_de.ini)
Edit the text for your language
Copy the new file to the locale directory and run Setup to change the language
Reserve three of more
I love it!. Now to figure out how to incorporate it into titanium themes other than the default.
Currently it will install to the current Titanium theme.
The function that installs the plg into Titanium (PlayItSubs.mscr -> Sub InstallPlg) can accept more parameters for other Titanium themes, but right now I'm just calling it with defaults when a new skin is selected (PlayItSubs.mscr -> Sub ChooseStyle).
Congratulations Zanix, was waiting for this release and will try it out right away.
Thanks
Love it! Thanks Zanix
Hi Zanix,
First of all, thanks for all your work! However, I have a issue with PlayIt! 0.40 that I hope you can help me fix. I have a Samsung Omnia i900 with the following installed:
WM 6.5 Professional with the Titanium (CHome) interface
S2P v0.72-beta (I have always tried 0.73)
Mortscript 4.2
JMLPanex v2.10
It installs correctly, however all buttons (Prev Track, Play, Next Track) don't do anything besides open S2P... what am I doing wrong..?
Thanks!
Once S2P is open, will the buttons control it?
Pressing the prev, play, next buttons when S2P is closed will run it, then immediatly minimize it. The "player" button will open, and stay in S2P.
Or are they just activating S2P and not controlling it?
mashimus said:
Hi Zanix,
First of all, thanks for all your work! However, I have a issue with PlayIt! 0.40 that I hope you can help me fix. I have a Samsung Omnia i900 with the following installed:
WM 6.5 Professional with the Titanium (CHome) interface
S2P v0.72-beta (I have always tried 0.73)
Mortscript 4.2
JMLPanex v2.10
It installs correctly, however all buttons (Prev Track, Play, Next Track) don't do anything besides open S2P... what am I doing wrong..?
Thanks!
Click to expand...
Click to collapse
I also have an i900 with all you mentioned...and works fine for me
Reinstall, soft reset?
more than 1 copy!!!
Hi Zanix,
This may sound crazy, but is it possible to have 2 plugins of playit at the same time? I use both S2P and Nitrogen (for different types of audio, S2P for audio books and Nitrogen for songs), and I would love to be able to have both of them available as titanium plugins. Alternatively, have multiple config files that I could pick online depending on what I want to listen to.
Great work zanix, you just blew my mind.
Not only does your plugin look great, but it also works flawlessly whereas CNitorgen and CS2P rarely if ever worked for me (never updated the music data in Titanium).
Hey my Friend,
I'm glad that my little Exe's for you (and your Plugin-Users) works for your great Plugin and make it as flewless as possible.
And also that TICS works fine with landscape (never forget: "-silent" means that you make error handling on your own )
But now: I will enjoy PlayIt - and say many Thanx for your work!
Cheers
Micha
naynada said:
I also have an i900 with all you mentioned...and works fine for me
Reinstall, soft reset?
Click to expand...
Click to collapse
zanix said:
Once S2P is open, will the buttons control it?
Pressing the prev, play, next buttons when S2P is closed will run it, then immediatly minimize it. The "player" button will open, and stay in S2P.
Or are they just activating S2P and not controlling it?
Click to expand...
Click to collapse
It happens even after S2P is running. I can see the album art and which song it's playing, but I cannot use the controls. (All it does is open S2P).
hmmm.. it's a custom rom, which I just put on as well...
I did install it over the top of CS2P.. but I also did uninstall CS2P afterwards, I wonder if that is the cause of the issue. I'll uninstall and re-install PlayIt and report back.
OK, reinstalled PlayIt! and I still have the same issue. Also, the buttons don't do the vibro even though I just set that option.
I remember 1 thing that happened when I first installed PlayIt... I didn't have JMLPanex installed and it detected this, so I installed JMLPanex afterwards. Am I supposed to "point" PlayIt! to where JMLPanex is?
Thanks
mashimus said:
OK, reinstalled PlayIt! and I still have the same issue. Also, the buttons don't do the vibro even though I just set that option.
I remember 1 thing that happened when I first installed PlayIt... I didn't have JMLPanex installed and it detected this, so I installed JMLPanex afterwards. Am I supposed to "point" PlayIt! to where JMLPanex is?
Thanks
Click to expand...
Click to collapse
Can you look in \Program Files\JMLPanex and see if there is a file named PlayIt.pnx
I may need to take a look at the JMLPanex detection and make sure it copies this file over
zanix said:
Can you look in \Program Files\JMLPanex and see if there is a file named PlayIt.pnx
I may need to take a look at the JMLPanex detection and make sure it copies this file over
Click to expand...
Click to collapse
Hi Zanix,
Yes, the file PlayIt.pnx is in there...
ugh.. I might do a hard reset just to get it working.. doh.
mashimus said:
OK, reinstalled PlayIt! and I still have the same issue. Also, the buttons don't do the vibro even though I just set that option.
I remember 1 thing that happened when I first installed PlayIt... I didn't have JMLPanex installed and it detected this, so I installed JMLPanex afterwards. Am I supposed to "point" PlayIt! to where JMLPanex is?
Thanks
Click to expand...
Click to collapse
Mmm. Custom ROM shouldn't be an issue (same here).
Well, if you haven't hard resetted already:
I also installed JMLPanex AFTER installing PlayIt, and I remember I had some issue with PlayIt, but I can't remember what.
I then uninstalled both JMLPanex and PlayIt, then installed them properly (ie. JMLPanex, THEN PlayIt)
Worked perfectly from thereon.
Maybe try that?
Hope you'll make a WM6.5.1 version !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Info
12Oct2011 - Facebook has altered the authorisation slightly, so manual paste method needs a little extra care (details here - Thanks to Nullstring).
(01June2011)Big RSSTab Development Announcement
(3March2011) Dual (AKA Easy) Cab Install Released - meltwater_FbTabV1.6(SeperateCabs)-2.zip (See install post for instructions)
Moved to post#3 to avoid confusion:
meltwater HTC FbTab v1.6.cab (3.32 MB, 7583 views)
v1.6Release05Aug2010.zip (3.25 MB, 9095 views)
(31Jan2011) Easy/Dual Cab Install Method Trial - Testing a new way to install and uninstall the FbTab.
(meltwater_FbTabV1.6&SenseUtil.cab (603 views) meltwater_FbTabV1.6(SeperateCabs).zip (272 views))
(4Dec2010) Introducing SenseUtil to assist with installation of any custom tab
(27Sep2010) Lang files added (hu-hu - zoliwr, zh-tw - mudhi). Many thanks.
(24Aug2010) New forum banner by Drakknar (thanks!)
(23Aug2010) Sense 2.5.192x (& old sense) Patch released (allows most of the tab functions to be used on a 2.5.192x based device)
(18Aug2010) TabProject2:Call for Developers
(11Aug2010) Facebook Tab v1.6 Cab & EXT (post#2) released
(05Aug2010) Updated Facebook Tab v1.6 released - GTX, Cabs & EXT will hopefully follow (v1.5 Cab kept to allow install and upgrade - use v1.6 cab)
(31July2010) Drakknar's icons are now live on facebook!
(22July2010) Request for FbTab Icon!
(21July2010) Captain Throwback's Cab (meltwater HTC FbTab v1.5.cab) moved to post#1 (please follow instructions on post#3 for install and un-install)
(20July2010) Tutorial/Files for changing Tab Text to Black (apaquette420 - see links below)
(19July2010) pt-pt & pt-br lang file RevB - attached to post#4
(16July2010) Fr-fr lang file RevB - attached to post#4
(16July2010) Upgrade Cabs are available see (1st roundup of Q&A Support below)
(15July2010) Releasing the v1.5 manual files now, let me know how you get on.
Please follow the install instructions very carefully & RTFM (read the fantastic manual) before asking Qs.
Note on development...
I have a development version which I've been working on which can do a lot more with the facebook api, however it is far from complete or bug free, but it was able to post comments, read all the status updates/wall posts of all your friends etc etc. I was also playing around with different GUI aspects but I hit several limits with the Sense SDK I was using etc.
Anyway, basically I've not had any time to look at it for the last few months, and the best course of action is to scrap it and let the XdaFacebook App team use the ties I was planning to use to link the tab to an application. Hopefully I can get a few of my ideas and suggestions put into the app, so the vision I had for the tab can still be realised. Since I'm not using facebook that much at the moment, I think this is the best way for the tab to move forward and provide more for everyone.
Hopefully as my work on the RSSTab continues, the main core of the Facebook tab (the HTC engine) can be replaced by the XdaFacebook app, so all the data in the tab can be populated directly from the same source. Although this will be a while off, this will be the best solution in the end.
Donations
PayPal:
if you use the facebook tab and would like my work to continue
I purposely did not include a donate button on the 1st release since although I had made several changes to the tab a lot of it was purely HTC functionality (and it would have been hard to understand what was my own work and what HTC have already included).
I did not feel it was fair to ask for donations where my own work on it was not clear.
However, since the 1st release I have been working very hard on this project, I have spent many hours/days/weeks testing and experimenting with the facebook api and with ensuring that the new additions will work not only on my device but will function for everyone (believe me it's a frustrating task).
So if you like using the tab (or if I've helped you get it working), and if you feel my work deserves it then please make a small donation, even if it's a few cents (even a tiny bit shows your appreciation).
Any donations will be spent on things to help me focus on developing the tab further, first up is a new battery (only $15!) as my phone has suffered from the many resets it has taken to test the sense code so far, so I really need to get a backup one. Hopefully that isn't a huge ask.
New phone battery is on it's way, many thanks to the total of 3 detonator so far. Next up, although I'm not confident on this one, is a battery for my laptop so I can program without being tethered to a power socket (and losing my work when it disconnects - have about 10 seconds before it dies). Again, I plan to get it from a cheep place so it's not too expensive, just something which only needed for this hobby.
It all shows that my work means something.
Information on the facebook api
When I started looking into the facebook api (something I said I wouldn't do I know) I discovered "Facebook Developer Toolkit", excellent I thought, my work is done, plug it in and away we go.
However, investigating further Microsoft had taken over the toolkit, the compact framework (as used by Windows Mobile) had been dropped (since Jan 14 2008) and they are only just building SilverLight support into it (windows phone 7). Add to that, facebook have introduced the GraphApi which replaces the Api implemented in the Jan 2008 build (and I don't think it's in the current Tookkit yet).
You might guess the next bit, after a lot of work, I have the outline of my own Fb Graph Api support. The next release shall be the foundation point of this work, if successful the remainder of my test code can be built in (but I didn't want to delay things any longer and I needed to see if it works on-mass first).
It has taken a lot to get it to this point - my only other windows mobile app was "Hello Worlde" so once again I have been starting from scratch and learning A LOT:
I hope you enjoy my hard work.
This release is to bring the general release up to speed with my current work, it may not appear to be significant in added functionality but believe me it is the stepping stone required for what comes next...
Information on the tab.
The origins of the facebook tab is the relocation of the HTC People Update's tab which is built into sense already. The mod originally moved this functionality into the main tabs and added a few extra features, therefore enabling everyone to enjoy the built in facebook functionality without hunting to find it, but also enjoy the excellent features HTC had already integrated.
Since then, I've been working hard to extend the features which the tab provides, improve the options for how things are displayed and allow easy configuration. Overtime, more features will be included and hopefully support for external apps perhaps.
Please don't badger for specific facebook features, I'm well aware I can't do comments, pokes, likes, notifications etc etc, but the current release is a huge step toward that and hopefully it will come in time.
Read and understand the above information before asking for features, but this is what I still hope to do (again don't post asking for them if it's on this list!).
To Do
192X version See patch in post below
Stage 2 of Facebook Api
[*]Use extra space at top of landscape mode
Include sense language selection HKCU\MUI\CurLang
Handle senseSDK version exception
[*]Support non-standard chars on Status Update post to facebook
[*]Remove item list scroll lag
Development Progress
[MOD][SENSE2.5TAB] Facebook Tab - Developer Thread
http://forum.xda-developers.com/showthread.php?t=663494
Note:
The development work is on going and I will release the next version when there is something essential and must-have implemented.
I would rather spend time developing new features than releasing tiny updates of little significance.
Known Issues
Will not work on manila 2.5.1921xxxx or lower (and some ROMs) - use 192x Install Patch (see Install post#3)!
It seems there are two versions of the facebook engine and the older one (used by 2.5.192x and some other ROMs) the 0DE73B01_manila file is smaller (~41k) than the newer version (~47k).
If you have the older version (small file), then you must use the 192x version of the tab or the tab will be un-usable and crash sense.
Info for cooks
See section "Can we cook this in a ROM?" in post #2 for EXT file etc.
Change History
23 Aug 2010 Sense 2.5.192x (& old sense) Patch released (MattOG testing)
11 Aug 2010 v1.6 Cab Release (captain_throwback & qitt)
05 Aug 2010 v1.6 Release
21 July 2010 v1.5 Cab Release (1032+250 views) +706 for v1.6 update (captain_throwback)
15 July 2010 v1.5 Release (1881 views) + GTXSkin (361+183 views) (mike2nl)
-(see user manual for update details) included lang files
(en-gb,en-us,nl-nl,fr-fr,de-de,pt-pt,pt-br,cs-cz,it-it,el-gr,sk-sk)
15 April 2010 v1.01 ReleaseD (2815 views) + All-In-One Cab (7762 views)
- Joint fixes for icon issues (etoy & qitt), included lang files
(en-gb,en-us,de-de,pt-pt,es-es,fr-fr,cs-cz,it-it,zh-tw,no-no)
12 April 2010 v1.0 All-In-One Cab Release Cab (353+71 views)
- Joint work from johncmolyneux & Captain_Throwback
24 March 2010 v1.0 ReleaseC (5185 views)+Cab(1084 views)
- switch over to use FacebookStatusUpdate.exe instead of mortscript
- updated manila so "Facebook.MyStatusScript" can be left blank and still run Facebook.MyStatusExe
(if using older release just leave the entry, it will be ignored - otherwise it'll skip copy of my status)
- updated Readme
- reg file no longer system hidden
FacebookStatusUpdate.zip (234 views)
- exe available to replace mortscript! (thanks to johncmolyneux) - see install instructs for details (will repack later)
23 March 2010 V1.0 ReleaseB (494 views)
- Changed default facebook app to MS Facebook App
- Updated Readme
23 March 2010 V1.0 Release
- First release
NEWS
POCKETNOW.COM Facebook Tab Released for HTC Sense 2.5
http://pocketnow.com/tweaks-hacks/facebook-tab-released-for-htc-sense-25
POCKETNOW.COM Video: Facebook Tab for HTC Sense
[/SIZE]http://pocketnow.com/softwar...cketnow+(pocketnow.com)&utm_content=Google+UK
Finally the tab for htc FACEBOOK Sense 2.5 is just beginning (Italian)
http://htc.hdblog.it/2010/03/24/finalmente-il-tab-facebook-per-htc-sense-2-5-muove-i-primi-passi/
I'm well proud! Thanks!
Thanks To
Sense 2.5.192x Patch Testing MattOG
v1.5 Beta Testers Agent Zach, Captain_Throwback, johncmolyneux, mike2nl, mkucuksari,electrikjesus, madindehead, Quitt, sternas, wez89
Sense SDK support eboelzner (+greenhacks & others on the thread)
Language Translations -see post #4 for details
BeeGee_Tokyo & maxycy (v1.5 maxSense fix)
Captain_Throwback (cab's etc)
johncmolyneux (FacebookStatusUpdate.exe, All-In-One exe, coding support)
etoy & qitt (Icon fixes)
MoonNah (for use of ManilaStartFix used in cabs)
Co0kieMonster
utopykzebulon
Everyone behind the kitchen (without which I would have got no-where):
12aon, 6fg8, chainfire, sztupy, Co0kieMonster etc
People who provided language files.
Also thanks for all the words of encouragement, patience and praise.
Thanks to Donators:
Laurentius26 - 12April2011
unknown - 16Dec2010
MattOG - 13Aug2010
weepatc - 11Aug2010
sharkie405
beegee_tokyo
Agent Zach
Warnings etc
Modifying manila means various levels of messing around with the files on the device so, as with most of the mods on here, back-up often and be prepared to screw it up and hard-reset your device. All the changes explained here may or may-not work on your particular device/version of manila or perhaps it's just not going to happen today.
______
Latest WVGA Screens
Latest VGA Screens
______
Thread Quicklinks:
RTFM - Read The Fantastic Manual & FAQ [Post#2]
Install Instructions [Post#3]
Language Files [Post#4]
v1.6 Release - Support for this release starts here [Post#1002+]
v1.5 Release - 1st roundup of Q&A Support [Post#829] Please read before posting similar Qs
v1.5 Release - Support for this release starts here [Post#771+]
Thread Tips/Guides:
(apaquette420) Change Tab Text To Black Tutorial & Files
See Sense FbTab Install Post for install instructions (must read before installing).
RTFM - Read The Fantastic Manual
RTFM - User Manual
Features
All the HTC facebook goodness on your doorstep!
Plus:
Update Now left-soft key
Launch Facebook App in menu (configure to fav app)
Launch Facebook Online in menu (configure to fav site)
Successful Update Time Display
Adjustable Automatic Update Peroid
My Updates - Displays your real status (only support text updates - urls etc ignored)
New For v1.6:
Improved scrolling
Support for non-ascii character updates
Anniversary/Birthday Icons moved for expanded views
Updated package to include fixed lang files
Correct reg key for Desktop Online
New For v1.5:
Update your facebook status directly from the tab!
Sense Settings Page (all settings for the tab now configurable via sense)
Expand/Collapse View
Introducing the HTC FbTab, (Stage 1 - The initial step to access the Facebook Api).
Improved multi-language support (api available for wm apps)
Facebook Tab Settings v1.6
The settings page is split into 5 main sections.
If any settings are adjusted, the user will be able to apply the settings from this page or to discard the changes.
The exception is within the Facebook Api Settings page where the authorisation keys are stored as soon as they are obtained.
Selection between normal and advanced settings (A) are set by the "Enable Advanced Settings" checkbox within the Advanced setting section.
Note: Any changes to any Advanced settings may cause issues with the operation of the tab if done incorrectly, so make sure you understand the purpose of these settings before you change them. They are marked as Advanced settings for a reason!
1 - Data Connections
Normal(1) Advanced(2)
Enable auto update timer[]
- Enable this setting if you wish the tab to automatically update for the specified period (this is independent of the HTC Download data automatically setting below).
Update internal in mins XX
- Period before automatic update occurs. Note: This appears only to run when the tab is selected, timer is reset on entry to the tab. Range is currently limited to 1-99 mins.
Download data when roaming
- I've not tested this much (I keep my data connections disabled). This setting controls if data connections should be allowed when roaming (not sure if that's general mobile connections via GPRS & 3G or when you are not on your foreign cell network). This setting is the setting available in the old HTC setting page.
(A) Download data automatically
- HTC 2 hour automatic update of the facebook data. Included in case you need to disable it (this runs independently from the above update timer).
2 - App & Web Shortcuts
Normal(1) Advanced(2&3)
Select Facebook Application
- Select which application is launched via Menu->Facebook App. Also selects which item to edit/delete in advanced mode.
Select Facebook Webpage:
- Select which webpage is launched via Menu->Facebook Online. Also selects which item to edit/delete in advanced mode.
(A) Delete Selected Application/Webpage
- removes the selected item from the list
(A) Edit Selected Application/Webpage
- Opens up the edit page for the current item (see below)
(A) Add New Application/Webpage
- Opens up the add new item page (see below)
Edit/Add Application(1) Edit/Add Webpage(2)
(A) Add/Edit Application/Webpage
(A) Display Name
- sets the name to use in setting page to refer to the application/webpage
(A) Shortcut
- the url/file path can be edited here directly.
(A) Browse to path (applications only)
- Opens the select file page to allow you to browse to and select the required exe.
Note: When you have selected the exe file by pressing it, "Select" will appear as the bottom right soft-key. You can "Select" the exe or "Cancel" if you wish.
(A) Additional arguments
- Some applications/pages may support additional arguments, which can be added here.
3 - Facebook Api Settings
Normal (Internal Authorisation Method)(1) Normal (External Authorisation Method)(2)
Note: Unlike the other settings pages, changes made the authorisation key are saved directly to the registry.
The authorisation here is only for the new functionality of the tab, in order to populate the friends list and get status updates you will still need to authorise the "HTC Sense" application via the Setting Tab -> Data Services.
If you do not wish to use the new functionality and the "HTC FbTab" application, then check the "Disable prompt for authorisation []" checkbox to avoid being asked to authorise the application. You will not be able to post updates via the tab without authorising first.
Due to issues with the authorisation methods with facebook, two options are provided to ensure this application will work with as many people as possible.
Option 1:
Use internal authorisation
- This uses an internal browser to display the authorisation page from facebook and allows you to login and authorise the application permissions. This should be the simplest method for most users, press Authorise and follow the prompts to authorise the HTC FbTab used for posting status messages directly from the tab.
Don't forget you will need to be connected to the internet and be able to access the facebook website from your connection.
Option 2:
Use external authorisation (Use default browser & paste code)
- On some devices the internal browser fails to work correctly, hence this method will launch your default browser (i.e. Opera) and navigate directly to facebook to authorise the "HTC FbTab" application.
Don't forget you will need to be connected to the internet and be able to access the facebook website from your connection.
1. You should login and authorise the application permissions.
2. Once you have authorised the application, you then need to Copy the url (either the whole thing or the part including "code=...", as long as you have at least the "code=..." to the end it will work). In Opera you can do this by pressing and holding on the url (if unselected it will default to copying the whole url).
3. Once you have copied the code into the clipboard, return to the settings page and press "Paste & Authorise".
The settings page will then use the code and authorise the application.
Remove Authorisation:
- This will remove the authorisation from the registry.
Note: If you want to fully remove the authorisation you will need to remove it directly from the your facebook account settings, via the Application Settings page.
Advanced (Internal Authorisation Method)(1) Advanced (External Authorisation Method)(2)
(A) Advanced Api settings (applies to both methods):
Note: These settings will default back to the original settings when the settings page is closed. This ensures the best settings are selected each time, unless the user specifically desires otherwise.
(A) Select authorisation page format
- Determines the format of the page facebook provides for authorisation. At times some pages may not be available, also some work better with the internal browser than others. You should only need to change this if you have a problem.
(A) Application Permissions
- Allows you to enable/disable the permissions you allow the "HTC FbTab" application to have. All are set to enable, since you will probably want to give the app permissions, but I want to provide the choice.
(A) Status Update
- Clearly you will need this if you wish to post updates from the tab.
(A) Offline Access
- Without this the permission will only last until you log out of facebook. Unlikely you would want to disable this option.
(A) Read Feeds
- This permission is not currently used by the application, however, it will be in later releases so if left enabled you can keep your current authorisation for later releases.
4 - File Path Settings
Normal(1) Advanced(2&3)
Hide facebook events
- Disables events being shown on the facebook tab.
Note: Events for the current day are still shown.
Event Notice Period (days)
- Specify the number of days before an event is due to occur before it is displayed on the tab.
Facebook Utility:
- In normal mode, this is read-only (Advanced mode you can edit it directly). If the stored path does not match the location of the FacebookUtil.exe, then a button shall be displayed to update it. If this is not set correctly, the tab will not open the settings pages or status update pages correctly, so it is important if you move FacebookUtil.exe, you run it from it's new location and update this item.
(A) Location of facebook profile pictures:
- For info only, this is a fixed location defined by the HTC dll.
(A) Location of facebook albums:
- Defines where the pictures are stored when you view people's facebook albums via the HTC tab's subpage "Updated Album" or "Open Online Album" links.
(A) Browse to path:
- Allows you to browse to a specific path to update the above location. "Select" appears when you are able to select the current folder.
(A) My Status Transfer Method
(A) Use Facebook Utility
- Allows you to define which method is used to copy the registry item which holds your most recent status update. You should only need to change this if you experience problems or slow response on the tab (this is less important on v1.6 since this is not run as often).
(A) Browse to path:
- Allows you to browse to a specific path to update the above location. "Select" appears when you are able to select the current exe.
(A) Additional arguments
- If required for the selected method.
eg.
Using Mortscript
App: \Windows\mortscript.exe
Argument: \Windows\FacebookStatusScript.mscr
Using FacebookStatusUpdate.exe
App: \Windows\FacebookStatusUpdate.exe
Argument: blank
(A) MS Facebook Application
(A) Cache location
- Allows you to change where the MS facebook application caches it's data
(A) Days to clear Cache:
- Number of days before MS facebook application the cache is cleared. (Limit 1-99 days).
5 - Advanced
Enable Advanced Settings
- Allows (A) advanced settings to be seen.
Note: Any changes to any Advanced settings may cause issues with the operation of the tab if done incorrectly, so make sure you understand the purpose of these settings before you change them. They are marked as Advanced settings for a reason!
Language Setting
Note:
The language settings here are independent of your language settings for sense itself.
Use device language
- The settings page will detect the devices language and use the correct language file if present. Otherwise it will default to UK English.
Application language setting:
- You can select a different language for the settings pages here. You will need to ensure you have the correct language file within your windows folder, otherwise the selection will be rejected.
If the file is reported as invalid, then there is probably an error in the xml formatting (you can double check the file by naming it .xml and opening via internet explorer).
About
Pressing on the xdadev meltwater's fbTab graphic will take you to directly this thread, so you can get support or make a donation!
Pressing on the Sense SDK graphic will show you more information about eboelzner's excellent Sense SDK used by this application.
FAQ
When I scroll to the tab, sense freezes and it is un-usable
It seems there are two versions of the facebook engine and the older one (used by 2.5.192x and some other ROMs) the 0DE73B01_manila file is smaller (~41k) than the newer version (~47k).
If you have the older version (small file), then you must use the 192x version of the tab or the tab will be un-usable and crash sense (see the FAQ It doesn't work for Manila 192X? below).
Tab freezes on 1st update and is unstable
I've found this sometimes occurs if you have restored your contacts after flashing a ROM (so you have lots of links which need updating all at once), although it may only occur on some ROMs [however I've found the people tab has the same problem, so it related to the HTC built in functions].
Ideally:
Setup the HTC facebook link and perform the 1st update without your contacts restored.
Otherwise:
Remove the links (via the contact card in the people tab)
Perform the update (from within the People Updates tab might also help)
After update has finished, it'll probably list the contact matches it finds again (don't forget to manually link any you linked manually before)
This way the when the links are re-added info like the contact pictures etc are already downloaded (done during the link process) and the process probably uses less resources.
From that point on, it is improved.
Menu item X does not work (i.e Settings)
Make sure you run "FacebookUtil.exe" from where-ever you installed it and update the "Facebook Utility Path" as described in the manual install sections.
Launch App/Web does not work (i.e. I get a Certificate error)
Make sure you have the application installed and the link is correct. Use the advanced (A) settings within the "File Path Settings" section of the settings page.
Updates were working, but have since stopped, how to do I get them working again?
http://forum.xda-developers.com/showpost.php?p=9688442&postcount=1375
(Thanks to Yusuke14 for confirming this solution)
1. Remove the registry keys located in:
HKLM\Software\HTC\HTCAccountManager\Facebook**** keys.
2. Via Settings tab on Sense, within the Data Services option, re-enter your facebook info
I can't see any updates from my friends!
You can create blank contacts with the facebook names as the contact name without a phone number or anything and it should still pick up and prompt for the links automatically.
You can even link any contact manually to a particular facebook contact via "Edit Contact" -> Facebook Link (Associate with Facebook Account) at the bottom bit of the contact editor.
Also you will need to sign into facebook via HTC first, before any contacts will be linked, it should prompt you to do this if you haven't already when you refresh (i.e. via People Page, Updates&Events page or your settings tab Data Services).
Remember though, if the person has privacy settings set high within their facebook account, you may not see updates from them (this is a limit of the HTC code).
It appears the HTC updates only go back so far in time so really old updates don't appear and it does not support non-text updates either (so url links etc are not shown).
Other User tips:
skyli91: You can link facebook to someone pretty fast if you go to Updates and Events in his/her Details page and here, the phone suggests some FB friends from the contact's name.
Agent Zach: You could link all of your contacts manually if the tab isn't giving you the option to do so.
Contacts Tab > All People > [Pick a Contact] > Edit Contact > Link
And if you want to Update the Status', etc.. the HTC way (outside of the Facebook Tab), in your contacts list, slide over to Updates & Events, click Menu, and click "Update Now".
It doesn't work for Manila 192X & some versions of sense?
There are two versions of the files which drive this tab, the tab is based on the later one. So if the tab does not work after you install it you may have the older version...
- Locate 0de73b01_manila in your windows folder.
IF the filesize is around 41Kb then you have the older 192x files and you require the patch.
IF the filesize is around 47Kb then you have the newer 2010 files and you do NOT require the patch (your problem is somewhere else).
DO NOT INSTALL THE PATCH IF YOUR FILE VERSION IS NOT CORRECT
To install the patch follow instructions in the install post#3 below.
Why is the install so complicated?
The install is complicated since the tab control file contains references to each available tab on your device. Every ROM has a different combination of tabs available and so this file is different for each ROM. If you install a copy of the Tab Control file which includes tabs which aren't on your device, manila will not work, if you install one which doesn't include all the tabs on your device, those tabs won't be available any more.
Many many people have managed to install the tab, through various ways, so there are plenty of people here who will help you out. Obviously make sure you have plenty of time available, just in case. Please keep backups of your tab control file (26948339_manila) as this will help you if you run into trouble.
Can we cook this in a ROM?
Yes, files will hopefully be provided for that within the thread (and I am happy for it to be included).
If you don't know what to do with EXT files (like me) then don't use them!
See the original poster for latest info:
b16b's [Facebook Tab v1.6 EXT]
File attached to this post too.
birkoffsjunk's Alternative:
birkoffsjunk [FacebookTab1.6.7z]
Install
Problems with sense not starting, try using SenseUtil to add/remove the tab without manually editing the tab control file.
Moved to this post (from 1st post):
meltwater HTC FbTab v1.6.cab (3.32 MB, 7583 views)
Manual Install v1.6 05Aug2010.zip [v1.6Release05Aug2010.zip (3.25 MB, 9095 views)]
Sections within this post:
Please ensure you follow the instructions from the correct section.
Dual Cab Install (using SenseUtil) Instructions:
Dual Cab Install/Un-Install using Separate Cabs [meltwater_FbTabV1.6(SeperateCabs)-2.zip]
Dual Cab Un-Install using Separate Cabs [meltwater_FbTabV1.6(SeperateCabs)-2.zip]
Dual Cab Upgrade using Separate Cabs [meltwater_FbTabV1.6(SeperateCabs)-2.zip]
FAQ: My ROM shows double tab icons when selected
Note:
The following instructions are for the other install methods, it is hoped that the Easy Cab Install should work for everyone. If that is shown to be the case then the other methods will be removed.
Captain Throwback's Cab Install Instructions:
Captain Throwback's Cab Install
Captain Throwback's Cab Un-Install
Sense 2.5.19XX Instructions:
Use v1.6 Manual 192x Patch Install Instructions below.
Manual Install/Un-install Instructions:
v1.6 Manual New Install Instructions
- Follow these instructions to manually install the tab on sense 2.5 (but not including sense version 2.5.19xx) which does not already have the facebook tab.
v1.6 Manual 192x Patch Install Instructions
- Follow these instructions to manually apply the patch to the install for 192x based systems (follow check to ensure which version you have)
v1.6 Manual Upgrade v1.5 Instructions
- Follow these instructions to manually upgrade the existing v1.5 facebook tab to the current version
v1.6 Manual Upgrade v1.0 Instructions
- Follow these instructions to manually upgrade the existing v1.0 facebook tab to the current version (again this does not include sense version 2.5.19xx).
v1.6 (& v1.5) Manual Un-install Instructions
- Follow these instructions to manually remove the facebook tab from sense.
Problems?
Manila Sense Fix - Sense is not starting after install/uninstall
Reset Manila Sense - Sense didn't regenerate correctly
Cooking issue - Exception when running facebook.exe for the 1st time
Missing menu items after upgrade
Please note:
If you are editing the tab control file (26948339_manila) or language files, it is recommended you use an editor which supports the following format:
Line Endings:Unix(LF)
Encoding:UTF-16 Little Endian
Editors such as Programmers Notepad and Notepad2 appear to work well.
Dual Cab Install (using SenseUtil) Instructions:
- Standard Cab for SenseUtil and a Cab for the Tab files (placed together in a single zip file).
Remember: Backup your device and data before attempting this mod. Post if you have any problems.
Dual Cab Install using Separate Cabs [meltwater_FbTabV1.6(SeperateCabs)-2.zip]
INSTALL:
a) Install both Cabs, in no particular order.
b) Run SenseUtil from Start Menu\SenseUtil\AddTab\SenseUtil FbTab Add to Add the FbTab to Sense.
Dual Cab Un-Install using Separate Cabs [meltwater_FbTabV1.6(SeperateCabs)-2.zip]
UNINSTALL:
a) Run SenseUtil from Start Menu\SenseUtil\RemoveTab\SenseUtil FbTab Remove to Remove the FbTab from Sense.
b) You can now uninstall the FbTab cab, and if desired, the SenseUtil cab too.
Note: As the references in sense have been removed, the files will have no effect on sense anymore.
c) The remaining registry entries can also be manually removed from HKEY_CURRENT_USER\Software\HTC\Manila all of which will start with "Facebook.".
Dual Cab Upgrade using Separate Cabs [meltwater_FbTabV1.6(SeperateCabs)-2.zip]
UPGRADING (note there is nothing different to v1.6):
If you already have the tab installed, then you can use either cab package, however instead of Adding the tab, you will need to "Reset Sense" - Del ManilaFull.xml either from SenseUtil or manually (stop sense, delete the file from windows and restart sense).
FAQ: My ROM shows double tab icons when selected (typically applies to NRG ROMs)
A: Delete or rename 1F04C842_manila in windows, this file is not required for your ROM. You will then need to "Reset Sense".
B]Latest version of Sense Util is available here
Captain Throwback's Cab Install Instructions:
Captain Throwback's Cab Install
Disable Sense from Today items.
Install CAB [Attached to post#1 - meltwater HTC FbTab v1.6.cab] (this will create a shortcut to "FixStartManila" in your Start Menu)
Tap "FixStartManila" to run it. It will likely seem like nothing happened.
Tap "FixStartManila" a second time. This time, you will likely see the wait cursor, which will stay for 10 seconds or so.
Re-enable Sense in Today items.
Done!
Please make sure you follow the instructions for the cab, and particularly if you uninstall (there are extra steps need afterwards compared to a normal cab).
Captain Throwback's Cab Un-Install
To Uninstall:
Disable Sense
uninstall the CAB
run "T-Back Remove Facebook Tab.cab" (Attached to this post) to restore Sense to it's original state (either that ,or you can download FixStartManila from the GPS Tab thread see Manila Sense Fix section below)
When you re-enable Sense, you should be without FB tab (note that if you've installed other tabs since flashing your ROM, they will not show up using my CAB - in that case, I recommend MoonNah's CAB).
Manual Install/Un-install Instructions:
v1.6 Manual New Install Instructions
Warnings etc
Modifying manila means various levels of messing around with the files on the device so, as with most of the mods on here, back-up often and be prepared to screw it up and hard-reset your device. All the changes explained here may or may-not work on your particular device/version of manila or perhaps it's just not going to happen today.
ONLY USE THIS METHOD IF YOU DO NOT HAVE THE TAB ALREADY INSTALLED.
If you do not have the tab installed then you shall need to ensure the tab control file is updated correctly to allow sense to include it.
Download the manual install package from post #1.
Disable sense, via the Settings\Home\Today items.
Delete "\\windows\manilaFull.xml" on your device (don't worry this is regenerated when manila restarts).
Extract the files from the folder "TabFiles\Windows\" to the windows directory on your device. Plus ensure you copy "Facebook_Pages.xml" to "\Windows\ManilaXml".
Update your tab control file (26948339_manila) from \Windows folder:
The files may be hidden system files (may need to enable viewing of system hidden files to find them). Keep an original copy of your 26948339_manila file (i.e copy as 26948339_manila_backup).
Scott8813's tutorial show's the steps required to edit the tab control file in more detail if you are unsure on this (http://forum.xda-developers.com/showpost.php?p=6004802&postcount=216)
Edit your tab control file (26948339_manila) from your \windows\ directory (you can use the example in the zip file \tabcontrol\ as a guide, use a UTF-16 Compatible Editor such as Notepad2 or Programmers Notepad.
a) Insert the following text, between the other "pages" defined, replacing the X with suitable number (re-numbering the others as required to avoid duplicated numbers):
Code:
<Page Order="X" Name="facebook.page" PackageName="HTC" Title="[[Facebook]]">
<ComponentReference Name="page" Mode9Path="HTC\People\facebook.mode9" Component="SummaryAllPage" SmartComponent="true"/>
<ComponentReference Name="icon_normal" Mode9Path="HTC\Manila\Facebookicon.mode9" Component="Facebook_Off"/>
<ComponentReference Name="icon_selected" Mode9Path="HTC\Manila\Facebookicon.mode9" Component="Facebook_On"/>
<ComponentReference Name="icon_preview" Mode9Path="HTC\Manila\Facebookicon.mode9" Component="Facebook_Preview"/>
</Page>
b) Copy back completed file to your device \windows\ directory
Delete the configuration reg-key HKLM\Software\HTC\Manila\Configuration (this resets the tab list and allows the new tab to be included in the tab re-ordering page of the settings tab - the keys only re-generate when you go back to that tab re-ordering page)
Import the registry entries from appFacebook.reg file into your devices registry.
Note: You may need adjust the default path settings for the example application links etc to match the applications you have installed and their locations.
Extract the "FacebookUtil" folder to "Program Files\FacebookUtil" (I would recommend on your device rather than storage card).
Run "FacebookUtil.exe", from where you've copied it to and Update the Facebook Utility's "Stored Path to Current" within the "File Path Settings" page, and "Apply" the change.
Re-enable sense, via the Settings\Home\Today items (it will take a little longer than normal to re-start the 1st time).
Enjoy. (Don't forget to authorise to allow Updating of your status).
v1.6 Manual 192x Patch Install Instructions
There are two versions of the files which drive this tab, the tab is based on the later one. So if the tab does not work after you install it you may have the older version...
Check the version of the files you have:
- Locate 0de73b01_manila in your windows folder.
IF the filesize is around 41Kb then you have the older 192x files and you require the patch.
IF the filesize is around 47Kb then you have the newer 2010 files and you do NOT require the patch (your problem is somewhere else).
DO NOT INSTALL THE PATCH IF YOUR FILE VERSION IS NOT CORRECT
Patch the install:
Install the tab as normal (see above - via cab or manually).
Download the attached zip file:
192xFbTabPatchRelease
Disable sense
Replace the 090EF4F3_manila in the windows/ folder with the one in the zip file.
Replace the Facebook_Pages.xml in windows/ManilaXml/ folder with the one in the zip file [note this file is universal so later releases will include the updated version of this file already].
Delete manilafull.xml from the windows/ folder.
Restart sense.
To un-install follow the same instructions as for v1.6 normal installation.
Note:
Not all the functions of the normal tab are available in this version (i.e. Expand/Collapse View has been removed).
v1.6 Manual Upgrade v1.5 Instructions
Warnings etc
Modifying manila means various levels of messing around with the files on the device so, as with most of the mods on here, back-up often and be prepared to screw it up and hard-reset your device. All the changes explained here may or may-not work on your particular device/version of manila or perhaps it's just not going to happen today.
ONLY USE THIS METHOD IF YOU HAVE THE TAB ALREADY RUNNING WITHOUT PROBLEMS.
With the previous facebook tab working and running properly, updating to the new version can be achieved by following these instructions:
Disable sense, via the Settings\Home\Today items.
Replace the following files:
Lang Files(\windows\):
1FED11F0_manila
3abb2ec0_manila
781C9850_manila
Script Files(\windows\):
090EF4F3_manila
33A980DD_manila
FacebookUtil Application (\Program Files\FacebookUtil\):
FacebookUtil.exe
.
Update reg entry/setting for Desktop Online Link:
[HKEY_CURRENT_USER\Software\HTC\Manila]
"Facebook.LaunchWeb2"="www.facebook.com/home.php?m2w"
Delete "\\windows\manilaFull.xml" on your device (don't worry this is regenerated when manila restarts).
Re-enable sense, via the Settings\Home\Today items (it will take a little longer than normal to re-start the 1st time).
v1.6 Manual Upgrade v1.0 Instructions
Warnings etc
Modifying manila means various levels of messing around with the files on the device so, as with most of the mods on here, back-up often and be prepared to screw it up and hard-reset your device. All the changes explained here may or may-not work on your particular device/version of manila or perhaps it's just not going to happen today.
ONLY USE THIS METHOD IF YOU HAVE THE TAB ALREADY RUNNING WITHOUT PROBLEMS.
With the previous facebook tab working and running properly, updating to the new version can be achieved by following these instructions:
Download the manual install package from post #1.
Disable sense, via the Settings\Home\Today items.
Extract the files from the folder "TabFiles\Windows\" to the windows directory on your device. Plus ensure you copy "Facebook_Pages.xml" to "\Windows\ManilaXml".
Delete "\\windows\manilaFull.xml" on your device (don't worry this is regenerated when manila restarts).
Extract the "FacebookUtil" folder to "Program Files\FacebookUtil" (I would recommend on your device rather than storage card).
Run "FacebookUtil.exe", from where you've copied it to and Update the Facebook Utility's "Stored Path to Current" within the "File Path Settings" page, and "Apply" the change.
Re-enable sense, via the Settings\Home\Today items (it will take a little longer than normal to re-start the 1st time).
Enjoy. (Don't forget to authorise to allow Updating of your status).
v1.6 (& v1.5) Manual Un-Install Instructions
Warnings etc
Modifying manila means various levels of messing around with the files on the device so, as with most of the mods on here, back-up often and be prepared to screw it up and hard-reset your device. All the changes explained here may or may-not work on your particular device/version of manila or perhaps it's just not going to happen today.
The easiest and safest option is to simply disable the tab via Settings, Home Screen Tabs. This will stop the tab being run and will have no further impact on sense.
In order to remove all the facebook tab related stuff you will need to follow all the steps:
Disable sense, via the Settings\Home\Today items.
Edit your tab control file to remove the following section of code (be sure to renumber the items). Or simply replace the tab control file (26948339_manila) with the backup you made before you installed the tab.
Code:
<Page Order="X" Name="facebook.page" PackageName="HTC" Title="[[Facebook]]">
<ComponentReference Name="page" Mode9Path="HTC\People\facebook.mode9" Component="SummaryAllPage" SmartComponent="true"/>
<ComponentReference Name="icon_normal" Mode9Path="HTC\Manila\Facebookicon.mode9" Component="Facebook_Off"/>
<ComponentReference Name="icon_selected" Mode9Path="HTC\Manila\Facebookicon.mode9" Component="Facebook_On"/>
<ComponentReference Name="icon_preview" Mode9Path="HTC\Manila\Facebookicon.mode9" Component="Facebook_Preview"/>
</Page>
Delete "\\windows\manilaFull.xml" on your device (don't worry this is regenerated when manila restarts).
Delete the configuration reg-key HKLM\Software\HTC\Manila\Configuration (this resets the tab list and allows the new tab to be included in the tab re-ordering page of the settings tab - the keys only re-generate when you go back to that tab re-ordering page)
Delete the following files from "\\windows\":
05FF1072_manila
06C09C86_manila
090EF4F3_manila
1F04C842_manila
33A980DD_manila
4F90441E_manila
51B6F88A_manila
59B632C0_manila
5D4F2200_manila
6BEE887F_manila
(Plus the language files you might have installed:
0CA4B866_manila, 0FEAB434_manila, 1FED11F0_manila, 3abb2ec0_manila, 5E0EA458_manila, 6CD727C8_manila, 0074c4d4_manila, 0431A004_manila, 781C9850_manila, 5470CE36_manila, 35452D58_manila)
Delete the following files from "\\windows\ManilaXml":
Facebook_Pages.xml
Delete the "FacebookUtil" directory from "\\Program Files\" or where-ever you installed it.
Using a registry editor, you can safely delete the following entries (although they will do no real harm if left there):
[HKEY_CURRENT_USER\Software\HTC\Manila]
"Facebook.LaunchAppSel"
"Facebook.LaunchAppNameXX"
"Facebook.LaunchAppXX"
"Facebook.LaunchAppArgsXX"
"Facebook.LaunchWebSel"
"Facebook.LaunchWebNameXX"
"Facebook.LaunchWebXX"
"Facebook.LaunchWebArgsXX"
"Facebook.LastUpdateTime"
"Facebook.LastUpdateDate"
"Facebook.MyStatus"
"Facebook.MyStatusExe"
"Facebook.MyStatusScript"
"Facebook.AutoUpdateInterval"
"Facebook.AccessToken"
"Facebook.AccessTokenPermission"
"Facebook.ExpandView"
"Facebook.FbApiExe"
"Facebook.FileDialogLastPath"
"Facebook.LangFile"
Note: Some "Facebook.xxxxx" entries will remain (they are also used by the people update tab, so I would recommend you keep them).
Re-enable sense, via the Settings\Home\Today items (it will take a little longer than normal to re-start the 1st time).
If sense does not start, double check your tab control file (26948339_manila) edit and perform steps 1, 3, 9 again. Otherwise, refer to "Manila Sense Fix" section below.
Problems?
Unable to authorise?
Facebook has altered the authorisation slightly, so manual paste method needs a little extra care (details here - Thanks to Nullstring).
Basically, facebook has added "#_=_" at the end, which you must remove for the app to extract the required authorisation code from the rest of the url.
Manila Sense Fix - Sense is not starting after install/uninstall
If you run into problems with Sense not starting then there are three things you can do.
1. Run moonnah's B_L_Group_FixStartManila_2.5.cab from the following thread (this should fix any problems with your tab control file):
http://forum.xda-developers.com/showthread.php?t=670116
2. Delete the tab control file (26948339_manila) & "\\windows\manilaFull.xml" and restart your device. Sense will take a while to regenerate so please wait.
3. Post your tab control file (26948339_manila) on the thread and we shall correct any problems and repost it.
Reset Manila Sense - Sense didn't regenerate correctly
Disable sense, via the Settings\Home\Today items.
Delete "\\windows\manilaFull.xml" on your device (don't worry this is regenerated when manila restarts).
Delete the configuration reg-key HKLM\Software\HTC\Manila\Configuration (this resets the tab list and allows the new tab to be included in the tab re-ordering page of the settings tab - the keys only re-generate when you go back to that tab re-ordering page)
Re-enable sense, via the Settings\Home\Today items (it will take a little longer than normal to re-start the 1st time).
Cooking issue - Exception when running facebook.exe for the 1st time
This can occur if the ROM includes an older version of the senseSDK dlls than the ones used by the exe (v1.39) - typically CHTE.
Ensure you only have the latest versions of the following files (provided by with the tab):
sensesdk.resources.qvga.dll
sensesdk.resources.vga.dll
stedysoft.sensesdk.dll
Missing menu items after upgrade
Right-hand menu should include the following items:
NEW - Update Status
Facebook App
Facebook Online
NEW - Expand/Collapse View
Settings
If they aren't shown up, ensure you have followed the steps which reset Sense correctly (2,4 & 7 of Manual Upgrade Instructions).
Language Files
Language Files
This release requires updated language files (mainly to support the settings pages).
Please note:
If you are editing the tab control file (26948339_manila) or language files, it is recommended you use an editor which supports the following format:
Line Endings:Unix(LF)
Encoding:UTF-16 Little Endian
Editors such as Programmers Notepad and Notepad2 appear to work well.
To create a language file you need to determine the manila name (using ManilaHash.exe (part of the Manila kitchen package), file-names are listed below):
1. Make a copy of the original base file for your language, with the correct language manila filename.
2. Look at the Facebook tab specific files and add the new entries, with translations as you wish (Make sure you use UTF-16 Compatible Editor)
Sense requires the following file format:
Line Endings:Unix(LF)
Encoding:UTF-16 Little Endian
3. Upload to this thread, and it will be added to the list.
[Note:The tab name "Facebook" is specified in the Tab Control file (26948339_manila), since it didn't appear to be set correctly via the language file, but can change it there if you wish.]
Facebook Language Files already created (v1.6 updated or available for V1.01 but now require updating):
Facebook..................PeopleUpdate.......LangCode
35452D58_manila.......7825aca6_manila en-gb (v1.6)
6CD727C8_manila.......035dc316_manila nl-nl (mike2nl v1.6)
3abb2ec0_manila.......2f75480e_manila fr-fr (romualdrichard v1.6RevB)
0CA4B866_manila.......367aeb34_manila cs-cz (jirkab v1.6)
0074C4D4_manila.......3d740322_manila it-it (etoy & Drakknar v1.6)
5470CE36_manila.......40d6f504_manila en-us (captain_throwback v1.6)
1FED11F0_manila.......441d773e_manila pt-pt (dotcompt v1.6)
781C9850_manila.......1c29959e_manila pt-br (dotcompt v1.6)
24a3de40_manila.......58a5d78e_manila es-es
0431A004_manila.......65252a52_manila de-de (BeeGee_Tokyo v1.6)
0FEAB434_manila.......6868ca82_manila el-gr (colossus_r v1.6)
44D8781A_manila.......730337e8_manila nb-no (agaPer v1.6 - Attached)
5E0EA458_manila.......7044e3a6_manila sk-sk (pa3x v1.6)
55D8F302_manila.......1367acd0_manila sv-se
1A673DD0_manila.......4e699b1e_manila pl-pl (Skrobel v1.6)
6A5D7454_manila.......66a492a2_manila hu-hu (zoliwr v1.6 draft - Attached)
7E83165A_manila.......14f76628_manila zh-tw (mudhi v1.6 - Attached)
4E2DE27C_manila.......5ddfcaca_manila ru-ru (Bumeranghc v1.6 - Attached)
Facebook Language Files still need creating:
Facebook.................PeopleUpdate LangCode
4A098364_manila.......0598e5b2_manila ro-ro
6729ABA8_manila.......5a90a336_manila es-es_tradnl
017A1F4A_manila.......2c2c2b18_manila ja-jp
46FB4326_manila.......38da25f4_manila zh-cn
79ABC8F8_manila.......3cc83046_manila tr-tr
7BAB7AC8_manila.......401ed616_manila da-dk
193074C2_manila.......57fd9e90_manila fi-fl
0F3D0AEE_manila.......6be21fbc_manila ko-kr
6D71ED18_manila.......6f505c66_manila ca-es
15EBBB0E_manila.......78d5d7dc_manila ar-sa
V1.01 Translations (many thanks)
German manila files (thanks bl4ckb1rd)
Spanish manila files (thanks Hubie)
French manila files (thanks Fredz)
Czech manila files (thanks jirkab)
Italian manila files (thanks etoy)
?Zh-Tw? manila files (thanks boa19861105)
?pt-pt? manila files (thanks dotcompt)
Norwegian manila files (thanks KaiserAndy)
Dutch manila files (thanks mike2nl)
Greek manila files (thanks colossus_r)
Language File Example (Lang.zip)
Just use the following file from your \windows\ folder:
441D773E_manila \windows\htc\people\locales\pt-pt\peopleupdate.pt-pt.xml
Then rename to:
1FED11F0_manila \windows\htc\people\locales\pt-pt\facebook.pt-pt.xml
Then add the entries (plus the extra ones for v1.6 - see attached en-gb file):
Code:
<trans-unit id="IDS_FACEBOOKTITLE">
<source>Facebook</source>
</trans-unit>
<trans-unit id="IDS_FACEBOOK_OPENAPP">
<source>Facebook App</source>
</trans-unit>
<trans-unit id="IDS_FACEBOOK_OPENWEB">
<source>Facebook Online</source>
</trans-unit>
Then copy back to your \windows\ folder (and post on this thread).
When people have performed translations, I'll post up the completed files here.
Note:
Completed language files will get included in any installs/updates where possible.
Currently included languages for v1.6:
(en-gb,en-us,nl-nl,fr-fr,de-de,pt-pt,pt-br,cs-cz,it-it,el-gr,sk-sk,sv-se)
+ no-nb & pl-pl & zh-tw & hu-hu & ru-ru
Currently included languages for v1.01:
(en-gb,en-us,de-de,pt-pt,es-es,fr-fr,cs-cz,it-it,zh-tw,no-nb)
Thanks, I will give this baby a test ride...
Second Post from me
Many Thanks man I will try tonight and share my results.
Congratulations
Works on the NRG MM MAR 20 23548(9) - followed instructions to the letter (although you haven't explained when to transfer over the modified manila tab control file!)
Will keep you posted on any issues!
Thanks
rlatarche said:
Works on the NRG MM MAR 20 23548(9) - followed instructions to the letter (although you haven't explained when to transfer over the modified manila tab control file!)
Will keep you posted on any issues!
Thanks
Click to expand...
Click to collapse
Ok, zip and install post updated.
meltwater said:
This is my facebook tab, ...
To Do - if Possible
Read and understand the above information before asking for features, but this is what I still hope to do (again don't post asking for them if it's on this list!).
Directly update own status
Allow view of full status text, either bigger space, expand on selection or ticker tape
Update settings page to include things set in registry (Auto Update time etc)
Links to albums
Replacement of mortscript with an exe file (with thanks to johncmolyneux)
Click to expand...
Click to collapse
This is a great idea, don't know why HTC decided to do their facebook integration the way they did and not treat Twitter the same way (using the people tab). Couldn't you hook into the data and functions of the facebook tab from HTC's interface and not require mortscript/external exe?
jneilliii said:
This is a great idea, don't know why HTC decided to do their facebook integration the way they did and not treat Twitter the same way (using the people tab). Couldn't you hook into the data and functions of the facebook tab from HTC's interface and not require mortscript/external exe?
Click to expand...
Click to collapse
It's a limitation of what is in manila, you can only read from "HKCU\Software\HTC\Manila", unless you are only after a int value.
All the script does (or exe), is the following:
Code:
RegReadString("HKLM", "Software\HTC\FacebookSDK","Status",myStoredStatus)
RegWriteString("HKCU","Software\HTC\Manila","Facebook.MyStatus",myStoredStatus)
Not all the facebook function is within the manila files, some appears to be within ContactEditor.exe which only takes two different arguments from the scripts to get to new/specific Contact Detail Pages, then its internal to the ContactEditor.exe from there (that appears to also include "Update My Status"! ).
Not saying it can't be done, but it's a simple workaround to release it today.
Hmmmm for some reason, I cannot make this to work with my manila2.5_20121324 version...still playing with this...so we will see..thanks for your effort.
Got it installed all ok, but when I go onto the tab it crashes and freezes sense, have to restrat to get control back, but if i go onto the tab again, does the same.
ai6908 said:
Hmmmm for some reason, I cannot make this to work with my manila2.5_20121324 version...still playing with this...so we will see..thanks for your effort.
Click to expand...
Click to collapse
Ok, let me know what happens, I'm only 2.5.2012.1224, don't know what changes are in the people tab since then.
MalekoUK said:
Got it installed all ok, but when I go onto the tab it crashes and freezes sense, have to restrat to get control back, but if i go onto the tab again, does the same.
Click to expand...
Click to collapse
Ok will try to remember if/why it occurred for me during development, 1st thought is error in your tab control file. Perhaps post your ManilaFull.xml file after sense has loaded/generated it.
What version of sense are you running?
EDIT:Are reg settings imported?
meltwater said:
Ok will try to remember if/why it occurred for me during development, 1st thought is error in your tab control file. Perhaps post your ManilaFull.xml file after sense has loaded/generated it.
What version of sense are you running?
Click to expand...
Click to collapse
manila 2.5.1920
Working with "Manila 2.5 20121225.0_VGA_Amarullz
I have just started to play now. I will post more picture for other users within one hour, for sharing
But somehow, I can not able to see any items at the tab, just like you have at first picture. "Update now" Button seems to be not working properly.
Many Many Thanks Again
mkucuksari said:
Working with "Manila 2.5 20121225.0_VGA_Amarullz
I have just started to play now. I will post more picture for other users within one hour, for sharing
But somehow, I can not able to see any items at the tab, just like you have at first picture. "Update now" Button seems to be not working properly.
Many Many Thanks Again
Click to expand...
Click to collapse
Have you got any people linked? You've got lots of status icons, I think the hand one is to link people.
Have a look in your people tab -> updates & events tab at the end (this is the source page!), if you don't have people in there you won't anywhere.
The "update now" button is just moved, from menu in the source page, so check it there.
EDIT: Thanks for the screen, appears to be ok for VGA devices too!
Working perfect!
Thanks for your effort mate
Gonna start again later on, start from fresh and see what happens.
MalekoUK said:
Gonna start again later on, start from fresh and see what happens.
Click to expand...
Click to collapse
No worries, should be ok if you disable the tab via settings for now.
Hello,
I present my second Windows Mobile app:
SettingsExporter – I think the name is self-explaining. I tried to develop an easy to use application able to backup the vital system/user/programs settings and parameters to a .reg file, which enables the user to quickly restore the settings after a flash or HR.
Yes, we already have the fantastic fdcTaskManager from dotFred but this one exports either single registry key (with all the values and subkeys) or whole registry. My tool is able to store:
- single registry value
- several registry values in one key
- all the values of a key but without subkeys
- values which names start with a certain string
- values which names end with a certain string
- values containing certain string
- whole key with all subkeys/values
The last point is realized with a help of already mentioned fdcTaskManager under permission from dotFred (thank you Man!).
Program features/requirements:
- supports AppToDate
- requires NetCF 3.5 to be installed in your ROM.
- the app is partially dependent on the TaskManager from DotFred. A file called dotTaskMgr.exe should always be placed in program folder. Of course it is included in the download files.
- the program can run from any folder on both device memory or Storage Card. You don't even have to install it (that's why I included also a zip archive with all the files), you can just run it from the actual location. However the installation cab includes also program shortcuts (they appear in Start Menu) and files neccessary for AppToDate.
- REMARK: Because of .NetCF limitations the program cannot parse some of the value kinds, like REG_MUI or REG_QWORD however these types are used in so deep system settings that I wouldn’t even try to touch, so from this point of view they are not necessary for normal user customization purposes.
REMEMBER: never play with registry unless you know what you are doing. Always make backup of your data before you start to edit any registry values.
I spent many nights on testing this app and on choosing the settings worth exporting so everything should work fine (I made at least 10 flashes in the mean time and didn’t discover anything suspisious). However I cannot be held responsible for any damages to your ROM/device.
Below you can find my screenshots and download.
In following posts you can find also:
Program description - post #2
INI file syntax and notes - post #3
Description of default .ini files - post #4
How does it work?
Currently the SettingsExporter is basically a registry parser reading thru one (or more) of three config files (keys_....ini) in which the user puts keys/values that are supposed to be backed-up. For each line which is recognized as a registry value the program tries to gather it from the registry and writes to a (specified) text file as Microsoft Registry Entries (.reg) syntax. If the line is not recognized as a correct registry key/value or if it does not exist in the device’s registry, it is simply ignored.
Following the tip from Jackos (thanks Man!) there can be three config (.ini) files:
- keys_System.ini
- keys_Manila.ini
- keys_Other.ini
The user can choose to process one, two or all three .ini files. He can also choose if all the entries from the checked .ini files should be stored in one .reg file or the program should create one .reg file for each .ini file. This way we can divide our backup into groups and then restore them on different ROM (e.g. with different version of UI).
The main screen of the program consists of 5 main elements:
- “Current file path” text box with current path and name of the destination file. The path is initially set to \Storage Card\Backup\MyBackup.reg, but it can be changed either directly in this text box or using “Change File Name” button which opens the SaveFileDialog allowing you to choose a location and name for your destination file. Unfortunately the native .NetCF SaveFileDialog is poor and allows only to save in 2 folders depths, so this is the reason why I left the text box unlocked to allow manual editing of the path. Additionally when closing SettingsExporter saves last used path in registry so when you open it for the second time the initial path will be “yours”. This feature can be switched off in options.
- 3 checkboxes allowing you to choose which .ini files the app should process
- Save File button starting the Backup procedure
- Menu softkey allowing you to change the program options
- Exit softkey that (surprisingly) closes the application.
The Options screen (you can open it via Menu -> Options) is also very simple:
- Save all settings in one file – when you tap “Save File” all the .ini files which are “checked” in the main window will be processed and the effect will be saved in one file mentioned in the “Current file path” text box in the main window.
- Save in separate files – the “checked” .ini files will be processed but this time the effects will be stored in separate files. There will be separate destination files created basing on the same file name from the “Current file path” text box, but with appropriate suffix, so using the default MyBackup.reg file name, the destination files will be MyBackup_System.reg, MyBackup_Manila.reg, MyBackup_Other.reg.
- Backup previous output files – if any of the output (destination) files already exists it will be copied with “_old” suffix before writing new file.
- Associate Reg Files to fdcTM – this button associates the files with .reg extension to the fdcTaskManager which is located by default in the program directory. From this point on you can tap on a .reg file in File Explorer and it will be automatically imported to the registry. Use this function to easily restore your .reg files.
- Save last backup path – this option enables saving last used backup (destination) path upon program exit. Remember – the path is written to registry when you close the program. So if you configured the .ini file to store also SettingsExporter’s settings (stored in HKCU\Software\Skrobel\SettingsExporter) and you want to backup also this setting, you have to set the file path in the Main Window, then Exit the program (to write the path to registry) then open the program again and now you can press “Save File”.
ini files requirements
The .ini file should be a Unicode text file stored in the same folder that the program executable is stored. The names of the file must be exactly one of the names mentioned above (keys_System.ini, keys_Manila.ini, keys_Other.ini). Of course the “keys_Manila.ini” file is not reserved ONLY for values connected with Manila/HTC and the “keys_System.ini” doesn’t need to contain ONLY system settings. It’s my proposal for the entries grouping, but you can change the contents according to your own needs. Only leave the file names intact.
About the syntax:
I tried to make the syntax of these .ini files as simple as possible. So it’s really similar to the syntax of a normal .reg file, exctept it does not need a “REGEDIT4” nor “Windows Registry Editor Version 5.00” at the beginning and of course the values cannot be given next to the valuenames. Here are some examples of the content of an ini file:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\Connections]*
[HKEY_LOCAL_MACHINE\nls\overrides]
*
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSDeliveryNotify"
"SMSAvailable"
"SMSUnicode"
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS]
actSync
auto
roaming
[HKEY_CURRENT_USER\SOFTWARE\HTC\MANILA]
Manila://*
"Weather*"
*Co0kie*
*Enabled
And what does it mean?
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\Connections]*
It means that the specified key will be stored with all it’s values and subkeys (if there are any).
Code:
[HKEY_LOCAL_MACHINE\nls\overrides]
*
This one means that all the values under the [HKEY_LOCAL_MACHINE\nls\overrides] will be stored but without any subkeys.
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSDeliveryNotify"
"SMSAvailable"
"SMSUnicode"
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS]
actSync
auto
roaming
In these two cases only the mentioned values will be stored from the specified key.
Code:
[HKEY_CURRENT_USER\SOFTWARE\HTC\MANILA]
Manila://*
"Weather*"
*Co0kie*
*Enabled
And this is an example of using regular expressions.
Manila://* - means that all the values with names starting with “Manila://” will be saved
*Enabled - means that all the values with names ending with “Enabled” will be saved
*Co0kie* - means that all the values with names containing “Co0kie” will be saved
As you can see the quotes are ignored so you can put valuenames with or without them and it will not make any difference for the parser.
The current version of the program includes my .ini files that are a result of long and careful tests and save most of the configuration of WM6.5 and WM6.5.x. I created these .ini files on HTC Rhodium and different Jackos ROMs. Most of them should work on a variety of HTC devices, however I've already seen that many settings for HTC Kaiser is stored in different locations than on Rhodium. But as I wrote before: if a registry key/value mentioned in the .ini file is not found in the actual registry, it will not be stored in any form.
On the other hand some of the key names may not work or not exist on different devices/ROMs. Especially when you try to restore a bunch of settings taken from a Sense 2.5 ROM on a Titanium or CHome ROM, you should expect some problems. That’s where grouping comes in handy.
If you have ideas for other registry values which should be backed-up by default or settings for popular third party programs I don’t use, please share key/value names here with a short description of what the values mean. I will put them in the default .ini files so other users can benefit from them.
What settings are included in default .ini files
keys_System.ini
In this file I included many settins which are changed via standard Windows Mobile Control panel applets and a bit from Advanced Config:
- notifications settings (remember - when you restore these settings after a flash, you have to make sure your ringtones and sound files must be in the same places that they were during backup)
- locale/time zone information (no language specific settings, only message coding, date/time/number formats, locale and time zone)
- messaging settings like threading, delivery report, unicode etc.
- paired Bluetooth devices
- owner information
- volume settings
- screen off/suspend timeouts
- some phone/dialer settings
- Font size/Clear type
- basic ArcSoft MMS settings
- last used profile
- clock/alarm settings
- AGPS
- hardware button assignment (only Long Press Send Key on Rhodium)
- Long Press EndKey action
- some other settings like noise reduction, AGC, USB to PC and less important parameters
Click to expand...
Click to collapse
keys_Other.ini
In here I stored some of the third-party applications I use. Please propose other applications with their settings and I'll add them:
- PimBackup
- HTCAccountManager
- Palringo
- Total Commander
- RSS Hub
- SK Tools
- Spb Backup
- cleanRAM
- Skype
- ultrashot UTask
- Quick Shutdown
- QuickGPS
- Whip2Snap
- last but not least - own SettingsExporter settings
Click to expand...
Click to collapse
keys_Manila.ini
Manila has many versions with extremely different settings and behaviours so I tired to store ONLY the most basic settings which should work on all the manila versions (correct me if I am wrong):
[HKEY_CURRENT_USER\SOFTWARE\HTC\MANILA]
HomeBackgroundPath - self explaining
AnimationWallpaperFolder - default folder for "choose background" option
Home.WallpaperMode - setting connected to full screen weather animation
Manila://* - this allows to store the configuration of showed/hidden Sense tabs
"Weather*" - settings for Manila weather
Of course I could add here all CHT settings, but there are also different versions of CHT on the "market" so I personally prefer to use CHT Editor backup/restore functions than to try to make universal backup utility for Co0kie settings. But if you guys have some hints on this topic I appreciate any help.
Click to expand...
Click to collapse
I will try to post here detailed description of all the values I know and will try to add here all suggestions from the community. But this unfortunately depends on my free time...
this is post #5
post #6 just in case...
Congratulations on your release I'll try and report back soon!
Looks great.........
oh thanks a lot! i like to play a lot with co0kie home tab 2.0 and also with the registry so it will be very useful to save some lines of a reg key. In CHT 2.0 all setting are in hkcu/software/htc/manila/CHT.*** (also CHTE.*** and CHTI.***) and i would like to save registry setting like CHT.Tweaks.***
I will try and report back later. Thanks again!
c_shekhar said:
Looks great.........
Click to expand...
Click to collapse
It looks ****, but works great
Jackos, you always know something good to say.
Good morning Skrobel,
Once again thank you for taking the time to develop this application. Sorry I didn't get back to you earlier. I had technical difficulties.
Following our recent conversation I'm posting below my findings about version 0.1 beta.
Pros:
Easy, intuitive UI
3 customizable registry patterns for different settings
A lot of 3-rd party software patterns
Thought-out set of settings
Cons:
90's looking UI
No support for exporting Twitter and Youtube Account Manager settings
Poorly implemented AppToDate support
Partly Sense and CHT support
No way to backup e-mail accounts and signatures (I know it's difficult to assemble)
No file backup at all
No support for all registry types (not really needed through)
I think you will agree that this app still needs further development. In my opinion Sense SDK is good enough to start with.
Yours truly,
Jackos
Hello,
Thank you all for your comments. I plan further development, so whatever you will find, I will at least try to solve.
@Jackos
You deserve special thanks. I don't wan't to defend myself but please remember I am still n00b if about programming And I'd like to comment at least some of your cons:
90's looking UI - I fully agree. This is still on my "to-do" list. Honestly I have already tried to run the Sense SDK from eboelzner (on an early stage of the app) and I just couldn't get the controls to appear on the form. I haven't spent much time on it though as this was not the most important thing to do. And there are only a few controls in this app which are big enough to operate with finger
Poorly implemented AppToDate support - honestly I did it same way as you did for your ROMs I know there is a possibility to download up-to-date cab directly from within the program, but I think the vital thing is to inform the user that something has changed. Nevertheless I will try to improve also here.
No way to backup e-mail accounts and signatures (I know it's difficult to assemble) - yes, you're right. And WiFi settings would also be fantastic to backup. I honestly don't know how to handle it. I did an extensive search among some developers forums and nothing up to now...
No file backup at all - this honestly was not in my plans. I use SettingsExporter in conjunction with PIMBackup in which I have my configuration (stored by the SettingsExporter by the way), and I backup all my files, contacts, messages and calendar within 2 clicks. I don't think any file backup is necessary...
No support for all registry types (not really needed though) - I've seen a tool written using NetCF where (according to the description) it is possible. I will ask the developer for help.
The rest of the "cons" concerns the configuration files which are subject to develop continously and independently on the tool itself. I was kinda hoping that this thread will grow with suggestions of other values of which I don't know and/or I don't use. So whatever you feel should be placed here, please post it hence help to improve for other users.
Skrobel said:
No way to backup e-mail accounts and signatures (I know it's difficult to assemble) - yes, you're right. And WiFi settings would also be fantastic to backup. I honestly don't know how to handle it. I did an extensive search among some developers forums and nothing up to now...
Click to expand...
Click to collapse
There are some encryption algorithms that aren't reverse-able. I have no knowledge with one is used in WinCe so maybe it's not possible at all. You could try to backup settings without including passwords.
I guess we have to ask ultrashot. He knows nearly everything about nearly anything
Skrobel said:
I guess we have to ask ultrashot. He knows nearly everything about nearly anything
Click to expand...
Click to collapse
He's disassembling WM and SE mobile systems since he stopped using chamber pot
Strange, 35 downloads and nobody reported further problems? I don't believe there aren't any.
I dig up the e-mail and WiFi backup, but no real results yet. On the other hand I know how to handle the Sense SDK controls, so the next release will probably have better look as requested. But I don't want it to be the only update, so report guys, report
Runs fine on my Axim X51V running WM6.5. I've been using an old app until now called SettingSavior. And for specific third party apps, if I was able to find a registry entry where the registration key was stored, I used SKTools to create a reg file for that. then I used Shashimi to import cabs and .reg files.
Will explore your app more.
Some suggested other 3rd party apps for setting backup:
Sprite Backup
Galarm
Resco Explorer
Pocket Music
I used similar method to store my settings. I used CeRegEditor to make an "image" of the registry, then I changed my settings (also for third party apps), then I compared the saved image with the current state.
But if you use these programs and you have your setup created with SKTools, could you share it with me? I could check what settings are used for these apps, and update config files with them.
Thanks for creating this useful application ,I use this application, PIMBack-up and XDA_UC_NET - portable to fully automate the restore. Now a Hard reset or ROM update is a breeze.
Regards [email protected]