A wrong D600 rom is flashed into my D600, and now it stop at the first splash image and never go further.
I've tryed these below but none helps.
1. Reformat ROM by hold the left & right button then reset.
2. Enter bootloader and flash any rom that I've flashed before, but they all aborted at 2% and then reboot.
3. Dump a os.nb & a extrom.nb from a never flashed D600, and generate a nbh and flash, the result is the same as 2.
The SPL version of my D600 is 1.03.000, and I use the jumpspl to flash a rom before, but now I can not enter the system in the phone and can not run jumpspl anymore.
I thought the key point is that some number or value in these roms are not correct. I've tried both GENE10000 as Model ID, 11111111 as Country ID, 1.00.000.0 as Version, WWE as Language and GENE10000 as Model ID, SuperCID as Country ID, 1.00.000.0 as Version, CHS as Language.
I found an article (http://www.aray.cn/archives/1687 in Chinese) that said there is a list to modify the nbh by model and spl version, but I cannot find the list.
Any help is greatly appreciated!
D600
plz, download any version of ROM as WWE, then connect your device with computer, enter BOOT LOADER, then just click the RUU.exe files, your device will formatted, think it will help you..
Download Link:-
http://forum.xda-developers.com/showthread.php?t=381048
thank you for your help
I've tried that, but it didn't solve the problem. RUU got an error code 270 at progress 2% and my phone then reboot.
I forgot to write that RUU report error code 270 when flashing any rom at progress 2%.
I also tried to flash via sd card
but an error message "invalid certificate" got when checking sd contents
how to flash using SD card
xeroo said:
I also tried to flash via sd card
but an error message "invalid certificate" got when checking sd contents
Click to expand...
Click to collapse
Could you please explain how to flash by sd card
Well, just put the rom in your sd card with the name GENEIMG.nbh at the top level
Reboot into the bootloader, it will start automaticlly
Your sd card must be fat32 fs type.
xeroo said:
Well, just put the rom in your sd card with the name GENEIMG.nbh at the top level
Reboot into the bootloader, it will start automaticlly
Your sd card must be fat32 fs type.
Click to expand...
Click to collapse
Thank you for sharing , but my phone didn't responded to it.
Anyway did you try to gene_cert_fix to fix certificate issue of rom before flashing
It is said that not all gene phone will act, but most do.
I havn't tried the gene_cert_fix.
I found one via google and I'll try it later.
Thank you a lot!!!!
xeroo said:
A wrong D600 rom is flashed into my D600, and now it stop at the first splash image and never go further.
I've tryed these below but none helps.
1. Reformat ROM by hold the left & right button then reset.
2. Enter bootloader and flash any rom that I've flashed before, but they all aborted at 2% and then reboot.
3. Dump a os.nb & a extrom.nb from a never flashed D600, and generate a nbh and flash, the result is the same as 2.
The SPL version of my D600 is 1.03.000, and I use the jumpspl to flash a rom before, but now I can not enter the system in the phone and can not run jumpspl anymore.
I thought the key point is that some number or value in these roms are not correct. I've tried both GENE10000 as Model ID, 11111111 as Country ID, 1.00.000.0 as Version, WWE as Language and GENE10000 as Model ID, SuperCID as Country ID, 1.00.000.0 as Version, CHS as Language.
I found an article (http://www.aray.cn/archives/1687 in Chinese) that said there is a list to modify the nbh by model and spl version, but I cannot find the list.
Any help is greatly appreciated!
Click to expand...
Click to collapse
那个是骗人的，换字库吧呵呵。
Xeroo, is your provlem being solved?
Related
Please, I need this urgently. My XDA2 is stuckin bootloader mode and all attempts to flash it with any updates gives me Error 100 - Device ID . I need to try flash it by SD card with existing functional ROM and see wha happenes. Please!
this old topic, describes how to grab ROM file from working XDA2
http://forum.xda-developers.com/vie...tdays=0&postorder=asc&highlight=ntrw&start=25
Put it on my FTP please, ID64.serveftp.com akira/akira
TIA
Hi, got problem and need your HELP!
EDITED:
I was trying to set my raph to stock, cuz warranty.
But, after flashing stock SPL, it goes to bootloader write :
" Upgrade rom code error, please try again"
What was happend:
1)I forgot to flash back stock Radio, so... my Raphael now stay in bootloader. And write "Upgrade ROM code error, please try again".
2)I was tried to flash stoc SPL via SD card. maybe it is problem.
What was I try:
I tried to flash HardSPL, but it stuck on 0%
I tried to flash stock Radio, but it stuck on 0%
I tried to flash stock ROM , but it stuck on 0%
I tried to flash non-stoc ROM, and it writes "Invalid vendor ID" or somethink like that, its cuz I have stock SPL, right?
What next?
SOLVED
!! If you will try this way it is on your own risk !!
Here is how to solve this issue:
1) Download MTTY 1.42
2) Download ActiveSync Drivers
3) Download STOCK ROM for your phone(best is from you provider or seller web site)
4) Install drives and disable USB connection in ActiveSync and reboot your computer
5) Set your phone to bootloader and connect via USB
6) Open MTTY set connection to USB
7) Send command "set 16 0" in mtty (without the quotes)
8) Reboot your phone and set it again to bootloader
9) Allow USB connection in ActiveSync and run RUU with stock Rom and Radio
10) If flash is done, make hard-reset
11) You are done!
!!This comes with no gaurentee!!
I cant find way out of this issue
Maybe mtty can help, but I dont know what was write as commands.
A few members have run into that issue before.
Before MTTY, I recommend posting in the HardSPL thread to see if such a member can share some insights.
Cheers,
thx, hope they help me.
EDITED ! new facts !
MiTMaNeK said:
Hi, got problem and need your HELP!
EDITED:
I was trying to set my raph to stock, cuz warranty.
But, after flashing stock SPL, it goes to bootloader write :
" Upgrade rom code error, please try again"
What was happend:
1)I forgot to flash back stock Radio, so... my Raphael now stay in bootloader. And write "Upgrade ROM code error, please try again".
2)I was tried to flash stoc SPL via SD card. maybe it is problem.
What was I try:
I tried to flash HardSPL, but it stuck on 0%
I tried to flash stock Radio, but it stuck on 0%
Click to expand...
Click to collapse
As far as I know, HardSPL and the stock SPL cannot be flashed via SD card. You must use the .exe file that you download with HardSPL. I believe that the first post of the HardSPL thread says something to that effect. Flashing the stock SPL should always be done LAST, so flash your stock ROM and Radio (if the ROM does not include the Radio). If your phone is stuck in bootloader, you should still be able to flash your device. See this thread for more information about flashing back to stock SPL.
htcfan78 said:
As far as I know, HardSPL and the stock SPL cannot be flashed via SD card. You must use the .exe file that you download with HardSPL. I believe that the first post of the HardSPL thread says something to that effect. Flashing the stock SPL should always be done LAST, so flash your stock ROM and Radio (if the ROM does not include the Radio). If your phone is stuck in bootloader, you should still be able to flash your device. See this thread for more information about flashing back to stock SPL.
Click to expand...
Click to collapse
Yea, I know it now too HardSPL and stock SPL only via cable.
Yea, Im able to flash, but it every time stuck on 0%
And if i try to flash ROM what isnt for my Rahp it write "invalid vendor id", its because I got stock SPL and I cant find way how to flash HardSPL - normal way isnt working for me.
I dont know if what i have in mind will fix it - or possibly make it worse! so i wont post it here (in case someone else mistakes it for propper advice!) but check your PM - and remember it comes with no gaurentee!
SOLVED !
BIG THX TO Beeble !
Thx for the tip that info was very important for me...
Hello,
I try to downgrade my spl, but i can't find a rom. The HTC site doesn's have them anymore... Can someone please help me? I want SPL 1.42.0000 so i can install HSPL.
Thank you!!!
The version of hspl that requires 1.42.0000 (hspl1, or just hspl) is nearly two years out of date. Use hspl3 or, if you currently have spl 3.03.0000 use Hspl4. See my sig for links.
Thanks for your help, but i want to install MAGLDR for my Android version. The post says this:
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.
Click to expand...
Click to collapse
What do you think is the best i can do? I have SPL 3.03
Thanks
winmo to android in a nutshell
put phone in bootloader mode
run hspl4, choose 2.08.hspl
reboot into bootloader
flash radio 2.15.50
reboot into bootloader
flash magldr
restart phone
magldr should start
choose 'USB Flasher'
flash required CWM partition size
reboot into magldr
choose option 8 'AD Recovery'
CWM should boot (orange text)
((if you haven't yet done so, choose 'advanced - partition sd card' and set an EXT partition)) This step will format ALL your sd card, so copy off anything you want to save first.
choose 'flash zip from sd card' - 'choose zip from sd card'
reboot
thats it.
Thank you for this clear nutshell.
I have 3 questions: Can i flash radio to 2.15.50 with http://forum.xda-developers.com/showthread.php?t=611787? Is Leo_RADIO_2.15.50.14 okay? Is this version of magldr what i need? http://forum.xda-developers.com/showthread.php?t=893618?
And can i use my sd card after the installation for my music and stuff or can't i use it anymore after installation?
Thanks!
Yes
Yes
Yes you can.
Yes it works! I am realy happy! Thank you so mutch for your help!
ahhh, more karma points. 100 more and i qualify for a free yak.
if you have unlocked the boot loader of htc desire vc , you cann't firmware flashing with ruu.exe firmware file ,you cann't make firmware flashing by ruu.exe firmware file.
so you can firmware flashing htc desire vc with fastboot mode and stock recoveryi.mg , boot.img and system.img
now you download this firmware file http://www.mediafire.com/?k65xo3sqmnzt8wg
http://www.mediafire.com/?bv2i4i6s05u5k5c
http://www.mediafire.com/?sgrr34nn3cmm7os
http://www.mediafire.com/?u0fe3oylf52j2y1
http://www.mediafire.com/?enanibcr77tetv6
http://www.mediafire.com/?dw1sac50nhfla3b
http://www.mediafire.com/?g7ux0s3u7lktozl
http://www.mediafire.com/?3o7odc9ntofhri1
you extract you are download file , now you are put fasttboot mode htc desire vc joy you computer and than double click rumme ...
Hi..I have an HTC Desire VC for which I seem to have accidently deleted the system folder after rooting it using the Chiness CWM file..as of now I am trying to run a RUU file to load the default stock image but for some reason its not moving past the signature verification field. I am currently using a Chinese MIU rom which is working fine except that the WiFi, Bluetooth and Radio options are disabled..can you help me on how I can reload the stock rom on my phone so that all features are functioning.
BTW..the first link in the firmware file list is giving an error hence am unable to download it..please advise as any help would be greatly appreciated..thank you!
vineet2605 said:
Hi..I have an HTC Desire VC for which I seem to have accidently deleted the system folder after rooting it using the Chiness CWM file..as of now I am trying to run a RUU file to load the default stock image but for some reason its not moving past the signature verification field. I am currently using a Chinese MIU rom which is working fine except that the WiFi, Bluetooth and Radio options are disabled..can you help me on how I can reload the stock rom on my phone so that all features are functioning.
BTW..the first link in the firmware file list is giving an error hence am unable to download it..please advise as any help would be greatly appreciated..thank you!
Click to expand...
Click to collapse
yes it is complete you are error, you download this firmware file http://kuai.xunlei.com/d/TTSCMKLGRJVB
double click ruu. after don't anything and than window + R on you are keyboard %temp% you can find rom zip in temp folder you are copy and extract on you are desktop in fastboot folder you will find .img file .
now you can flash it with fastboot method.
Hi..I have tried to run RUU files of various countries but all the time the operations comes to an end with a "verify signature error"..I have followed the rom.zip creation method and save on the sd card as PK178IMG.zip but in that case the fastboot prompt finds the file and verifies it but then jumps back to the prompt wherein it has the list of options ie hboot..fastboot and all
vineet2605 said:
Hi..I have tried to run RUU files of various countries but all the time the operations comes to an end with a "verify signature error"..I have followed the rom.zip creation method and save on the sd card as PK178IMG.zip but in that case the fastboot prompt finds the file and verifies it but then jumps back to the prompt wherein it has the list of options ie hboot..fastboot and all
Click to expand...
Click to collapse
it is not support you can flash fastboot method with .img from update zip
hi, i am new here. i need emergency help. i have "htc desire w826" which is bought from china mainland. i wanted global rom so i unlocked the bootloader and changed the stock rom (lollipop) by using TWRP. it was working good but the battery was draining so fast. so, i wanted to changed the rom again. i tried another marshmallow rom but it was not stable and doing restart after every few minutes. then i also removed it by using TWRP, but accidentally the TWRP recovery is not working now and the phone is stuck in fastboot option.
i also tried to flash the phone by downloaded few custom roms (OPHCIMG.zip files) through sd card, but every time it says "devices halted due to large image file", even though i formated sd card both ntfs and fat32.
I also tried to connect and flash my phone through computer but unfortunately my pc (in ADB cmd window) can't find my phone!! :crying:
Please guys if anyone there suggest me which can help me, i would be very greatful. thank you
jubair207 said:
hi, i am new here. i need emergency help. i have "htc desire w826" which is bought from china mainland. i wanted global rom so i unlocked the bootloader and changed the stock rom (lollipop) by using TWRP. it was working good but the battery was draining so fast. so, i wanted to changed the rom again. i tried another marshmallow rom but it was not stable and doing restart after every few minutes. then i also removed it by using TWRP, but accidentally the TWRP recovery is not working now and the phone is stuck in fastboot option.
i also tried to flash the phone by downloaded few custom roms (OPHCIMG.zip files) through sd card, but every time it says "devices halted due to large image file", even though i formated sd card both ntfs and fat32.
I also tried to connect and flash my phone through computer but unfortunately my pc (in ADB cmd window) can't find my phone!! :crying:
Please guys if anyone there suggest me which can help me, i would be very greatful. thank you
Click to expand...
Click to collapse
Try flashing twrp again
jubair207;74882401"htc desire w826"
Please guys if anyone there suggest me which can help me said:
Hi , first give me answer on this question
1. Is System status : modified or official or temporary ?
2. Bootloader : Locked / Unlocked ?
3. Secure status: S-On or S-Off ?
4. Are you able to go in RUU mode?
command: fastboot oem rebootRUU
5. Post here you getvar info :
command: fastboot getvar all
6. Did you tried to update from sd card Official firmware ?
Format sd to fat32 , put RUU firmware inside it , make sure your device is OFF and rename that firmware to ruu don't add ruu.zip because it will be double ruu.zip.zip in your windows probably if is your extensions file types is checked , insert sd card , hold vol + and power button together and release once you see boot image , or start HTC it will automatically start flashing .
Click to expand...
Click to collapse