Related
hello.
i have the siemens SX-56 device and i did a rom burning of the special rom 1.2 from xda-developers.
the problem is that i have no reception.
something in the phone module got wrong.
i tried various bands, i tried different sims...but nothing.
i get zero reception and i cant make a call.
what to do?
have i been doing something wrong?
i tried to burn the 1.2 rom several times, but each time was the same.
PLEASE HELP
Thank you guys.
I also get no reception but I'm beginning to believe it's because I'm running Cingular and they run on th 850mhz band which the phone doesn't support :evil:
So I've now changed to the Special Addition ROM and the T-Mobile Radio Stack. When I go to the network selection within the phone tools, the only two that show are T-Mobile and AT&T. I'm running Cingular, but I was under the impression that I should be able to piggyback my coverage on T-Mobile coverage. For some reason, I still get no signal and when I try to tell it to connect to T-Mobile I get an error message.
bad upgrading!
Tried Flashing in T-Mobile ROM and the Radio Stack and it went through no problem. Still getting same issue. Could it just be the area I'm in, Syracuse NY that is.
Please help me too, i have the same problem...
does anyone here knows what to do?
Do NOT use the SX-56!!!!
I read alot of complaints about this ROM, its buggy!
You could try changing bands from the gsm bootloader menu.
Thank you for your reply,
i have already tried several bands from the bootloader.
is there a special way to change bands?
i chose the band i wanted, and right after that i did a SR.
is that right?
isnt there anyone here who could know whats going on? this is so bizzare.
Thank you
Hi to all budding cooks!
I have links here - thanks to HTC e-Club Australia - for those who wish to download the original signed ROMS for three of the four Australian mobile network providers: Optus, Vodafone and 3 Mobile. Unfortunately the folks at HTC haven't seen fit to publicly release a Telstra-specific ROM for the Next-G network, or else I'd have a link here for that too.
The ROMs available from the links below include the radio in the package, and will install it along with the network-specific stuff for each provider.
Click on the link to start your direct-to-PC download:
Hutchison Telecoms - 3 Mobile (this is the latest one, released on December 4, 2008)
Optus and Vodafone Networks (this is the same one HTC released on October 27, 2008 - no other update for Optus/Vodafone available as of January 3, 2009)
Links also added to the Raphael Wiki Page
Hope these can be of help to someone.....
Thanks for these. Have you tested any of them
Optus / Vodafone ROM
OK I have flash to this rom and so far so good.
It's a fully unbranded rom. Not even the program shortcuts in touchflow have been inserted.
This upgrade has fixed a main problem of mms for me where I can now send and receive mms again. I could not do this with.405 WWE rom. Radio is the the stock radio and I have had not improvment here in AUS and will upgrade to .28 or .32 shortly.
No speed diffrence and you will need to redo your confiqs again or restore from backup
aussieak said:
Thanks for these. Have you tested any of them
Click to expand...
Click to collapse
Only the 3 Mobile and Optus ones, and both work well. Haven't tried the Telstra ones, 'cos I hate Telstra and everything they stand for. My only dislikes are the telco's brandings everywhere on the 3 Mobile ROM, other than that they run exactly like the stock HTC ROM.
As for the radio I'm using with Optus, it's 1.02.25.32, and here in Newcastle it's clear as crystal. Send/receive MMS is fine, and SMS goes on GSM like it always has with Optus.
djshotty said:
Only the 3 Mobile and Optus ones, and both work well. Haven't tried the Telstra ones, 'cos I hate Telstra and everything they stand for. My only dislikes are the telco's brandings everywhere on the 3 Mobile ROM, other than that they run exactly like the stock HTC ROM.
As for the radio I'm using with Optus, it's 1.02.25.32, and here in Newcastle it's clear as crystal. Send/receive MMS is fine, and SMS goes on GSM like it always has with Optus.
Click to expand...
Click to collapse
Great thanks. Yes I am using the Optus one as well and still on orignal radio and so far so good, only had issue restoring the backups would not reinstall the programs and settings which is a bit of a pain But the Rom feels faster after the settings applied then the orignal I had. I don't know why I could not get mms to work on orignal rom .405 I had all the correct settings and it would never send now it's like perfect again.
Will upgrade radio next as .19 always has some lagg in connecting to the network
The file name of Telstra rom seems like Diamond... I don't think Diamond and Raphael shares the same rom right?
katsuya82 said:
The file name of Telstra rom seems like Diamond... I don't think Diamond and Raphael shares the same rom right?
Click to expand...
Click to collapse
It is for the Touch Diamond, yes, you're right. Apologies, and all references to it are now removed.
any ideas if this rom works on a vodafone uk device?
robnewton1 said:
any ideas if this rom works on a vodafone uk device?
Click to expand...
Click to collapse
Not sure, mate. Seeming though I live in Australia, I haven't been able to set up my computer somewhere in the UK and get my hands on a Vodafone UK edition Raph to test it. Maybe you could test it yourself, see how it goes, and post your results here.
There's nothing to worry about. Only one of four things could happen, and all of them are reversible.
(1) The flash is a failure: you brick the phone. Elsewhere in this forum are threads committed to helping those with bricked phones;
(2) The flash is a success, but you don't like the look, feel and speed of the ROM post-install;
(3) The flash is a success, but the Radio/modem isn't working well for you on your particular network, or
(4) The flash is a success and the whole thing works to your satisfaction.
Trial and error is the key to advancement. You will get nowhere if you don't try, and you always have here a number of others with the same device, to help you out of a bind if you get stuck. Great minds think alike, and as Dr. Conrad Zimsky said in 'The Core', "That's all science is, is best guess..."
cheers mate, my only worry is bricking. im new to winmo so all the flashin is new to me.
robnewton1 said:
cheers mate, my only worry is bricking. im new to winmo so all the flashin is new to me.
Click to expand...
Click to collapse
I suggest first and foremost you go to the Raphael Elite Team Thread and grab the HardSPL from there. For further instructions on how not to brick your phone, check out this thread. If you haven't already, install ActiveSync 4.5 for Windows XP, or Mobile Device Center 6.1 for Vista. Make sure you download and install the correct version for your operating system, as there are 32- and 64-bit variants.
Connect your phone to your PC through whatever Sync application you installed, then Flash your phone with the HardSPL first. Trust me, I've done it myself and it works, as long as you follow the instructions the boys have left in a text file included in the *.zip's you'll grab from that thread. After that, it's all smooth sailing. Installation of ROM's from wherever you decide to grab them is a risk each time you do it, but make sure that if the ROM's chef has specified a certain Radio to use with what he's cooked, that you Flash that to your device first then hard-reset, then Flash the ROM.
Hope this has helped a little bit.....
hmmm i think i must be missing something. ive flashed hardspl no problem but i get an invalid vendor error when i try to flash the voda rom, i thought hardspl stopped that? maybe im just a noob missing something
robnewton1 said:
hmmm i think i must be missing something. ive flashed hardspl no problem but i get an invalid vendor error, i thought hardspl stopped that? maybe im just a noob missing something
Click to expand...
Click to collapse
Try going back to the original SPL that you can grab from the same place you got the unsigned from. Then try flashing with the Vodafone/Optus one I've posted links to @top of thread.
same error. everything back to stock & nothings bricked so no biggy. i wanted the radios more than anything because i get pretty sucky reception at home but vodafone say i shudnt. oh well, no harm done a least.
Thanks for your help.
Can anyone verify if the optus rom gives access to the WCMDA 900 band that we know the device is capable of? Cheers
Mrjasjam said:
Can anyone verify if the optus rom gives access to the WCMDA 900 band that we know the device is capable of? Cheers
Click to expand...
Click to collapse
As far as I am aware, the device flicks between whatever frequency is available. That is, if the 900MHz band is there, then it uses it, but when the 2100MHz band is around, it'll switch to that one. I was happy with that stock Optus ROM in my Raph, using my Optus SIM card, but have gone back to the T.I.R. (PDM) one simply 'cos I like it.
My Raph is an original outright device bought from 3 Mobile - with the 3 generic ROM installed - but because I jumped from a stock Vodafone service to Optus ('cos Vodafone here in Newcastle are not providing 3G/HSDPA) I chose a ROM I liked the look of.
djshotty said:
As far as I am aware, the device flicks between whatever frequency is available. That is, if the 900MHz band is there, then it uses it, but when the 2100MHz band is around, it'll switch to that one. I was happy with that stock Optus ROM in my Raph, using my Optus SIM card, but have gone back to the T.I.R. (PDM) one simply 'cos I like it.
My Raph is an original outright device bought from 3 Mobile - with the 3 generic ROM installed - but because I jumped from a stock Vodafone service to Optus ('cos Vodafone here in Newcastle are not providing 3G/HSDPA) I chose a ROM I liked the look of.
Click to expand...
Click to collapse
Hi there do you get the UMTS 900 band option in the band tab? My 3 rom only gives me 2100, 800, 850 options in UMTS and the usual GSM frequencies.
Mrjasjam said:
Hi there do you get the UMTS 900 band option in the band tab? My 3 rom only gives me 2100, 800, 850 options in UMTS and the usual GSM frequencies.
Click to expand...
Click to collapse
I just check out the Optus /Vodafone ROM and the the GSM/UTMS band options have dropped down to 2 options
Auto
UTMS (900+2100)+GSM(900+1800)
Netwrok type is
Auto
GSM
WCDMA
My settings are auto auto and get HSPDA all day in Canberra
aussieak said:
I just check out the Optus /Vodafone ROM and the the GSM/UTMS band options have dropped down to 2 options
Auto
UTMS (900+2100)+GSM(900+1800)
Netwrok type is
Auto
GSM
WCDMA
My settings are auto auto and get HSPDA all day in Canberra
Click to expand...
Click to collapse
Perfect! Thanks very much for the info.
Hi, this is an interesting discussion about band freq's here...
I'm running 1.02.25.19 with ROMeOS 1.21 WWE and I see the following options:
Auto
GSM(900+1800)+UMTS(2100)
GSM(1900+850)+UMTS(1900+850)
UMTS(2100+800)
I'm with Vodafone. I do not experience any call quality issues, slow call connection or internet speed issues... so I'm not too sure if this changes anything considering Vodafone mainly uses 1800 and they're still in the process of running out 900MHz.
FWIW... I tried running Radio 1.02.25.28 but I did experience issues with my camera, which is why I'm back on .19
I have galaxy s2 international version with AT&T ....some reason my internet connection on 3g is super super slow....I don't know why? I have tried all kind of stock and custom roms and kernels....anybody know why and have solution to fix this... I will really really appriciate....I can't take this anymore....right now I am on cm7.1 but still the same connection speed........anybody can suggest which rom or anything to do with it....please help me I really need it....I want to fix it....soon as I can....
try KL1 modem, it seems to have good speeds
i have everything on kl1 phone modem csc...it has increased little bit not that much....i don't know why....i might call at&t tomorrow and find out...whats going on....any other suggestion anyone who has this problem........thanks for replying....
thanks
I've read a thread about the fix for that.. look in the general section, i think it is there..
Sent from my GT-I9100 using xda premium
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
hallo dare said:
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
Click to expand...
Click to collapse
I having the identical issue on 3Ireland network. No 3G connection at all, only 2g. Changing radio version does not help either.
hallo dare, have you sorted this problem?
amigggooo said:
I having the identical issue on 3Ireland network. No 3G connection at all, only 2g. Changing radio version does not help either.
hallo dare, have you sorted this problem?
Click to expand...
Click to collapse
No joy mate. stuck on poxy 2g. I've tried absolutely everything. Diff sim, phone sent back to Samsung, everything. They all say there's nothing wrong with phone. So i'm lost. Please let me know if things work out for you and vice versa.
hallo dare said:
No joy mate. stuck on poxy 2g. I've tried absolutely everything. Diff sim, phone sent back to Samsung, everything. They all say there's nothing wrong with phone. So i'm lost. Please let me know if things work out for you and vice versa.
Click to expand...
Click to collapse
It would be interesting to know your SGS2 is white version as well as mine.
I have to say that I have another SGS2 but old black version which is perfectly functional on the same 3 network. After playing a very long times with both phones settings, I have a feeling that the core of the problem lies in the "APN type" setting. Changing it's content affects how it connects to network. I have no deep understanding of what is happening behind the scene while changing this option, but there is a possibility that the portion of file system responsible for it somehow been damaged.
It would be great if the developers could tell us if this part of the Android file system is changed while flashing different firmware/radio, or it is persistent?
amigggooo said:
I having the identical issue on 3Ireland network. No 3G connection at all, only 2g. Changing radio version does not help either.
hallo dare, have you sorted this problem?
Click to expand...
Click to collapse
Dial *#*#4636#*#*, go to phone information and see the settings for the radio. It should be at the bottom. Google the settings for the GSM, WCDMA. Mine is currently 'GSM auto PRL'. 'WCDMA Preferred'is also a better option for 3G network.
Sent from my GT-S5830 using xda premium
ace_viknesh said:
Dial *#*#4636#*#*, go to phone information and see the settings for the radio. It should be at the bottom. Google the settings for the GSM, WCDMA. Mine is currently 'GSM auto PRL'. 'WCDMA Preferred'is also a better option for 3G network.
Click to expand...
Click to collapse
Thank you. I fiddled with GSM, WCDMA settings as you said, but no luck.
What is even more interesting is if the network mode is set to "WCDMA only", then I'm not even able to register on 3 network. After an attempt to manually connect to 3 via "Network Operators" menu, it says "Unable to connect. Try later".
Also after connecting via WCDMA, and then reverting back to GSM, the GSM dies as well. The only solution is to restart the phone.
If it is a software bug, then I do not understand why this problem did not go away after flashing different Rom with radio.
amigggooo said:
Thank you. I fiddled with GSM, WCDMA settings as you said, but no luck.
What is even more interesting is if the network mode is set to "WCDMA only", then I'm not even able to register on 3 network. After an attempt to manually connect to 3 via "Network Operators" menu, it says "Unable to connect. Try later".
Also after connecting via WCDMA, and then reverting back to GSM, the GSM dies as well. The only solution is to restart the phone.
If it is a software bug, then I do not understand why this problem did not go away after flashing different Rom with radio.
Click to expand...
Click to collapse
exactly the same for me also, by the way i've a black version
Same problem
Same problem for me in Spain...
WTF happens with this Galaxy S2.First USB voltage problem and now no 3G/HSPA connection.
Any solution, plz??
Samsung: never again
guys....carriers can't sell a device that is advertised as a 3g capable phone. Call them and spit "misleading advertising" mixing "give me a phone that I can actually use" words. You could also add "Release me from my contract, I'm moving to other 3g WORKING carrier".
They'll just freak out.
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
Jahngo said:
Same problem for me in Spain...
WTF happens with this Galaxy S2.First USB voltage problem and now no 3G/HSPA connection.
Any solution, plz??
Samsung: never again
Click to expand...
Click to collapse
It's a carrier problem, not a Samsung problem......
same problem
gastonw said:
guys....carriers can't sell a device that is advertised as a 3g capable phone. Call them and spit "misleading advertising" mixing "give me a phone that I can actually use" words. You could also add "Release me from my contract, I'm moving to other 3g WORKING carrier".
They'll just freak out.
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
It's a carrier problem, not a Samsung problem......
Click to expand...
Click to collapse
First I must say that I love your signature about the gs2 plus
Back to Business, are you completely sure of this? I am having the same problems, no 3g anywhere I've tired 7 different ROMs 3 different kernels, every setting I could find I've toggled and no luck what so ever, I'm on a T-Mobile no contract plan and I have the black I have the international unlocked version
tech.central said:
First I must say that I love your signature about the gs2 plus
Back to Business, are you completely sure of this? I am having the same problems, no 3g anywhere I've tired 7 different ROMs 3 different kernels, every setting I could find I've toggled and no luck what so ever, I'm on a T-Mobile no contract plan and I have the black I have the international unlocked version
Click to expand...
Click to collapse
T-Mobile USA?
If yes, you're probably in a market that they have not yet re-farmed the 1900mhz frequency for HSPA+ yet. The i9100 doesn't get 1700mhz, and the majority of T-Mobile USA's network uses the AWS band, which requires both 1700 and 2100mhz to work for 3g/"4g".
Hi,
I am having a problem with the network. I am currently using Idea mobile network and when I use WCDMA only option, I do not get any signals and also, when I am trying to use an aircel sim, I do not get any signals at all... is there any problem with the device?.. when I search for networks manually, I am able to see only airtel and idea in the list of networks... is amaze not compatible with vodafone or aircel or the various networks available....
When I try to use Data connection also, it is only connecting in 2g mode and not 3g... plz help.
gmm8877 said:
Hi,
I am having a problem with the network. I am currently using Idea mobile network and when I use WCDMA only option, I do not get any signals and also, when I am trying to use an aircel sim, I do not get any signals at all... is there any problem with the device?.. when I search for networks manually, I am able to see only airtel and idea in the list of networks... is amaze not compatible with vodafone or aircel or the various networks available....
When I try to use Data connection also, it is only connecting in 2g mode and not 3g... plz help.
Click to expand...
Click to collapse
Amaze is compatible with frequencies:
GSM:
850, 900, 1800, 1900 MHz
UMTS:
850, 1700/2100, 1900, 2100 MHz
Data:
HSDPA+ (4G) 42.2 Mbit/s, UMTS, EDGE
Have you had ANY phone work on the idea network properly? Same with the airtel?
For starters, switch from WCDMA only to Auto or GSM/WCDMA.
See what this post recommends:
http://support.t-mobile.com/message/120750#120750
pbergonzi said:
Amaze is compatible with frequencies:
GSM:
850, 900, 1800, 1900 MHz
UMTS:
850, 1700/2100, 1900, 2100 MHz
Data:
HSDPA+ (4G) 42.2 Mbit/s, UMTS, EDGE
Have you had ANY phone work on the idea network properly? Same with the airtel?
For starters, switch from WCDMA only to Auto or GSM/WCDMA.
See what this post recommends:
http://support.t-mobile.com/message/120750#120750
Click to expand...
Click to collapse
Yes, my other mobile which is Xperia Pro (MK16i) works fine with all the networks here in India...but i do not understand why Amaze is not working on 3g network while I am able to use 2g service (both data and calls) on the same network...
data
How about ask your local service person for the correct settings, or hopefully someone on this board who lives in your area can post theirs.
Is there an OTA specific to your phone?
While not the case with you currently, it may be important if you travel--there are some areas where certain carriers don't have that coverage:
http://support.chinavasion.com/index.php?_a=viewarticle&_m=knowledgebase&kbarticleid=227
some help needed
Plz friends can anyone help me with this... the aircel operating frequencies for 2g and 3g are 1800 and 2100 (my assumption)... the device is not at all working with an aircel connection (not even on 2g)... I am currently using idea network which is working fine with 2g but not 3g... when I try to search for available networks manually also, I am able to see 2G networks for idea, airtel, vodafone, and bsnl (aircel and some others again missing) and no networks at all when in wcdma only mode... when I switch to wcdma only, the idea network also vanishes completely....
I am not able to figure out what to do with this...
There are many Indians in amaze forum and former members, reach out to them and see if any one of them used your carrier, and see if they had the same issues or not
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
gmm8877 said:
Plz friends can anyone help me with this... the aircel operating frequencies for 2g and 3g are 1800 and 2100 (my assumption)... the device is not at all working with an aircel connection (not even on 2g)... I am currently using idea network which is working fine with 2g but not 3g... when I try to search for available networks manually also, I am able to see 2G networks for idea, airtel, vodafone, and bsnl (aircel and some others again missing) and no networks at all when in wcdma only mode... when I switch to wcdma only, the idea network also vanishes completely....
I am not able to figure out what to do with this...
Click to expand...
Click to collapse
Aircel uses 900 and in some places possibly 1800. Do you have a data plan? Have you spoken with a support person with any one of your carriers--they're used to things like this and getting in the proper settings. I would strongly recommend that.
Check the Settings->About Phone to find out which version of android you have, and if you are running a custom ROM or not.
Do all of that first--make sure you have a data plan, speak with a support person, find out a little about your phone.
If you are stock check with your support person if there is an upgrade for you, also.
If you are NOT stock, you might want to go back to the Stock GB or ICS (remember to update the radio also) so your phone will be basic and stable, to be sure it will work at all with data. Once you've determined if it will work with data, then you can try one of the custom ROMs if you like, but NOT JellyBean or KitKat, as they are all problematic.
Check this post for instructions:
http://forum.xda-developers.com/showthread.php?t=2167596
And as ravike14 said, "There are many Indians in amaze forum and former members, reach out to them and see if any one of them used your carrier, and see if they had the same issues or not."
I have a data plan activated...I have not done any change in software...the current version is 4.0.3..and aircel network is not at all working on my device..that y using Idea network (that too working only in 2g mode)...I cannot have support on the device as I purchased it online from someone else...and it is not a device which is for India... it is a T-mobile device..Do you this change of ROM will resolve this or will it still remain the same... can there be a problem with the antenna (but 2g network is working fine)....
pbergonzi said:
Aircel uses 900 and in some places possibly 1800. Do you have a data plan? Have you spoken with a support person with any one of your carriers--they're used to things like this and getting in the proper settings. I would strongly recommend that.
Check the Settings->About Phone to find out which version of android you have, and if you are running a custom ROM or not.
Do all of that first--make sure you have a data plan, speak with a support person, find out a little about your phone.
If you are stock check with your support person if there is an upgrade for you, also.
If you are NOT stock, you might want to go back to the Stock GB or ICS (remember to update the radio also) so your phone will be basic and stable, to be sure it will work at all with data. Once you've determined if it will work with data, then you can try one of the custom ROMs if you like, but NOT JellyBean or KitKat, as they are all problematic.
Check this post for instructions:
http://forum.xda-developers.com/showthread.php?t=2167596
And as ravike14 said, "There are many Indians in amaze forum and former members, reach out to them and see if any one of them used your carrier, and see if they had the same issues or not."
Click to expand...
Click to collapse
data
gmm8877 said:
I have a data plan activated...I have not done any change in software...the current version is 4.0.3..and aircel network is not at all working on my device..that y using Idea network (that too working only in 2g mode)...I cannot have support on the device as I purchased it online from someone else...and it is not a device which is for India... it is a T-mobile device..Do you this change of ROM will resolve this or will it still remain the same... can there be a problem with the antenna (but 2g network is working fine)....
Click to expand...
Click to collapse
I think it should still work. The tech should be able to give you settings regardless of the device origin--you're still paying for a plan, and some support should come with that.
Nevertheless, check this to make sure you have the right settings.
You "may" also have to call T-mobile and ask for unlock code for your phone--they will ask you for the IMEI.
I don't know if necessary, but have read something to that effect--that in using the Amaze 4G in another country, you need to have the phone unlocked. I'm sure someone else on the boards here will let us know.
The back cover houses the antenna, and yes, it could be the antenna, but unless you have another back cover to test it with, it will be best for you to check the settings first, and then see if it needs to be unlocked.
Then come back here with what you've learned--it'll help me learn too.
The ad said that the phone is unlocked... I purchased it from Ebay and I have a prepaid connection with the provider.. it is "pay as you go plan" so I guess they wont provide much help as I have seen customer care people putting their hands up many times saying it is a problem with the device and they cannot help...that's y I was trying to get some help here on the forum as someone else could also have faced the same issue and can help me with their experience...
pbergonzi said:
I think it should still work. The tech should be able to give you settings regardless of the device origin--you're still paying for a plan, and some support should come with that.
Nevertheless, check this to make sure you have the right settings.
You "may" also have to call T-mobile and ask for unlock code for your phone--they will ask you for the IMEI.
I don't know if necessary, but have read something to that effect--that in using the Amaze 4G in another country, you need to have the phone unlocked. I'm sure someone else on the boards here will let us know.
The back cover houses the antenna, and yes, it could be the antenna, but unless you have another back cover to test it with, it will be best for you to check the settings first, and then see if it needs to be unlocked.
Then come back here with what you've learned--it'll help me learn too.
Click to expand...
Click to collapse
wcdma
gmm8877 said:
The ad said that the phone is unlocked... I purchased it from Ebay and I have a prepaid connection with the provider.. it is "pay as you go plan" so I guess they wont provide much help as I have seen customer care people putting their hands up many times saying it is a problem with the device and they cannot help...that's y I was trying to get some help here on the forum as someone else could also have faced the same issue and can help me with their experience...
Click to expand...
Click to collapse
Thanks for explaining. I apologize I neglected to put the settings link yesterday--you'll want to check your settings:
http://compixels.com/8630/manual-3g-settings-for-airtel-vodafone-idea-bsnl-docomo-more
Thanks again for your reply...I already have those same APN settings saved for my provided...but my problem is that my device is not receiving any 3g signals to be exact...I can connect to the data connection also but with 2g speeds...
pbergonzi said:
Thanks for explaining. I apologize I neglected to put the settings link yesterday--you'll want to check your settings:
http://compixels.com/8630/manual-3g-settings-for-airtel-vodafone-idea-bsnl-docomo-more
Click to expand...
Click to collapse
gmm8877 said:
The ad said that the phone is unlocked... I purchased it from Ebay and I have a prepaid connection with the provider.. it is "pay as you go plan" so I guess they wont provide much help as I have seen customer care people putting their hands up many times saying it is a problem with the device and they cannot help...that's y I was trying to get some help here on the forum as someone else could also have faced the same issue and can help me with their experience...
Click to expand...
Click to collapse
Besides the firmware update, there has been a separate radio update.
I think these are the most recent updates:
Software number is 2.14.531.30 710RD
Baseband version is 1.15.550L.08DC_30.80.550L16D
It's possible that your phone will work with them.
Does anyone else agree?
how do I try them.. I mean what do I need to do..
pbergonzi said:
Besides the firmware update, there has been a separate radio update.
I think these are the most recent updates:
Software number is 2.14.531.30 710RD
Baseband version is 1.15.550L.08DC_30.80.550L16D
It's possible that your phone will work with them.
Does anyone else agree?
Click to expand...
Click to collapse
how do i do this
gmm8877 said:
how do I try them.. I mean what do I need to do..
Click to expand...
Click to collapse
You may be able to just put the official OTA on your exernal SD card and flash through recovery--not quite sure yet.
I gotta see some of the settings info, so for starters go into your settings->about phone, screenshot the page that appears and also scroll down to any new pages, and post screenshots here.
How to screenshot:
http://forum.xda-developers.com/showthread.php?t=1885386
After that, reboot the phone into recovery following these instructions, and screenshot the recovery screen and post it here also:
Power the phone off and wait about 10 seconds after the screen goes black to be sure it's off->hold Volume Down button, while doing so press the Power button, and release both buttons.
The phone will boot to bootloader, should say hboot up top, and have a little list below it.
If you can't screenshot it via the previous method, note if at the top of the page is says Locked or Unlocked, and if it says "S-Off" or "S-On", and note the version of hboot so you can post the info here.
Use the power down button to highlight the list item "Recovery", and then press and release the Power button to enter the recovery. After recovery loads, note if it returns to a screen just like the hboot screen, or if says in it "TWRP", "CWM", or "4EXT" or any such other thing, and screenshot that or get the info and post that here also.
Now that you've learned what sort of state the phone's in, you can reboot from whichever screen you're on, and have your phone back to normal.
Once you're back with your phone booted, you'll find a screenshots folder in gallery most likely, else you'll have to search the phone with a file manager app or google to find it, but check the gallery first.
After that we'll look for the proper update and update method for you.
Hopefully by then someone else will come along and say something like "All he needs to do is download this "Official OTA" [link included] and put it on the SD card and flash it via hboot"--hopefully, 'cause I may be making this more complicated than it needs to be.
Here, let me repeat that, "Hopefully by then someone else will come along and say something like "All he needs to do is download this "Official OTA" [link included] and put it on the SD card and flash it via hboot"--hopefully, 'cause I may be making this more complicated than it needs to be."
In bootloader, it is showing as:
Unlocked
RUBY PVT SHIP S-OFF RL
HBOOT-1.93.0003
OpenADSP-v02.6.0.226.00.0202
IN RECOVERY: Team Win Recovery Project v2.3.3.0
I have also added screenshots as attachments for the about phone setting menus.
pbergonzi said:
You may be able to just put the official OTA on your exernal SD card and flash through recovery--not quite sure yet.
I gotta see some of the settings info, so for starters go into your settings->about phone, screenshot the page that appears and also scroll down to any new pages, and post screenshots here.
How to screenshot:
http://forum.xda-developers.com/showthread.php?t=1885386
After that, reboot the phone into recovery following these instructions, and screenshot the recovery screen and post it here also:
Power the phone off and wait about 10 seconds after the screen goes black to be sure it's off->hold Volume Down button, while doing so press the Power button, and release both buttons.
The phone will boot to bootloader, should say hboot up top, and have a little list below it.
If you can't screenshot it via the previous method, note if at the top of the page is says Locked or Unlocked, and if it says "S-Off" or "S-On", and note the version of hboot so you can post the info here.
Use the power down button to highlight the list item "Recovery", and then press and release the Power button to enter the recovery. After recovery loads, note if it returns to a screen just like the hboot screen, or if says in it "TWRP", "CWM", or "4EXT" or any such other thing, and screenshot that or get the info and post that here also.
Now that you've learned what sort of state the phone's in, you can reboot from whichever screen you're on, and have your phone back to normal.
Once you're back with your phone booted, you'll find a screenshots folder in gallery most likely, else you'll have to search the phone with a file manager app or google to find it, but check the gallery first.
After that we'll look for the proper update and update method for you.
Hopefully by then someone else will come along and say something like "All he needs to do is download this "Official OTA" [link included] and put it on the SD card and flash it via hboot"--hopefully, 'cause I may be making this more complicated than it needs to be.
Here, let me repeat that, "Hopefully by then someone else will come along and say something like "All he needs to do is download this "Official OTA" [link included] and put it on the SD card and flash it via hboot"--hopefully, 'cause I may be making this more complicated than it needs to be."
Click to expand...
Click to collapse
can't find the India ICS RUU for flash.
gmm8877 said:
In bootloader, it is showing as:
Unlocked
RUBY PVT SHIP S-OFF RL
HBOOT-1.93.0003
OpenADSP-v02.6.0.226.00.0202
IN RECOVERY: Team Win Recovery Project v2.3.3.0
I have also added screenshots as attachments for the about phone setting menus.
Click to expand...
Click to collapse
You did a good job with that--thanks. Hey, you're in good shape--everything is new enough.
You need to Super CID your phone, and then flash a rom for one of your local (in India) carriers.
Super CID instructions:
http://unlimited.io/juopunutbear.htm
ROM for carriers:
Sorry I can't provide the link--I'm having a helluva tough time searching.
Maybe by the time you've Super Cid'ed your phone, someone else will tell us where to find a proper ICS RUU for India.
Thank you
Thank you for taking out time for helping me...can any other rom (other than the T-mobile) working... and I dont know what is RUU..lol.. I am pretty new to these terms.:laugh:
pbergonzi said:
You did a good job with that--thanks. Hey, you're in good shape--everything is new enough.
You need to Super CID your phone, and then flash a rom for one of your local (in India) carriers.
Super CID instructions:
http://unlimited.io/juopunutbear.htm
ROM for carriers:
Sorry I can't provide the link--I'm having a helluva tough time searching.
Maybe by the time you've Super Cid'ed your phone, someone else will tell us where to find a proper ICS RUU for India.
Click to expand...
Click to collapse
Super CID, RUU
gmm8877 said:
Thank you for taking out time for helping me...can any other rom (other than the T-mobile) working... and I dont know what is RUU..lol.. I am pretty new to these terms.:laugh:
Click to expand...
Click to collapse
In order to use the phone in your country you need to have one of your carrier's firmware on the phone so it is compatible.
You can't put their firmware on your phone until after you've performed "Super CID". After performing that, other carrier's firmware can be flashed to the phone.
RUU restores the phone to factory condition. Let's not concern ourselves with that just yet--follow the instructions to Super CID.
Hello All,
I am hoping that someone can help me out.
I purchased 6 Samsung Galaxy S3 unlocked phones. I put SIM chips in each, all from the same provider and all with the same service plan. 3 of the phones everything is working great including fast Internet. The other 3 phones have extremely slow Internet. I did a bit of research and noticed that the phones that are slow display EDGE in Mobile network type. The phones that are fast display HSDPA:9 . Could this difference be the cause of the data speed problem? Can anything be done to fix it?
My apologizes if this is being posted in the wrong forum.
Thanks
liz.la said:
Hello All,
I am hoping that someone can help me out.
I purchased 6 Samsung Galaxy S3 unlocked phones. I put SIM chips in each, all from the same provider and all with the same service plan. 3 of the phones everything is working great including fast Internet. The other 3 phones have extremely slow Internet. I did a bit of research and noticed that the phones that are slow display EDGE in Mobile network type. The phones that are fast display HSDPA:9 . Could this difference be the cause of the data speed problem? Can anything be done to fix it?
My apologizes if this is being posted in the wrong forum.
Thanks
Click to expand...
Click to collapse
In your way, EDGE means slow, HSDPA fast, HSDPA offers speeds up to 21mbps (if your carrier supports it) and EDGE up to 0.5 mbps or so.
Now, if your 3 other phones don't connect to HSDPA (3G) then it's disabled in settings or signal is low or the chip is messed up.
So by checking if everything is good go to settings, under first tab (connections) go to More networks > Mobile networks and make sure that under network mode WCDMA/GSM is checked, notice that WCDMA is HSDPA.
If still not getting faster speeds try to check if WCDMA only option works, if not, eh, bad chip.
lsalamun said:
In your way, EDGE means slow, HSDPA fast, HSDPA offers speeds up to 21mbps (if your carrier supports it) and EDGE up to 0.5 mbps or so.
Now, if your 3 other phones don't connect to HSDPA (3G) then it's disabled in settings or signal is low or the chip is messed up.
So by checking if everything is good go to settings, under first tab (connections) go to More networks > Mobile networks and make sure that under network mode WCDMA/GSM is checked, notice that WCDMA is HSDPA.
If still not getting faster speeds try to check if WCDMA only option works, if not, eh, bad chip.
Click to expand...
Click to collapse
Thanks for the reply.
I activated the WCDMA/GSM. As soon as I did the icon status(?)displayed on the top of the phone turned to a circle with a line through it. About 3 minutes later the status changed to an E with bars next to it. The Status/Mobile network type still says EDGE.
When I try to connect to a site it is slow. Does this mean the device is still getting the 2G signal? Could all 3 phones have a bad chip?
Thanks.
that is true
liz.la said:
Thanks for the reply.
I activated the WCDMA/GSM. As soon as I did the icon status(?)displayed on the top of the phone turned to a circle with a line through it. About 3 minutes later the status changed to an E with bars next to it. The Status/Mobile network type still says EDGE.
When I try to connect to a site it is slow. Does this mean the device is still getting the 2G signal? Could all 3 phones have a bad chip?
Thanks.
Click to expand...
Click to collapse
Do all of the phones have the same baseband? Check in settings, about.
Just to make sure the modem is the same.
I just check 2 of the phones (they are all not with me now)
The baseband of one of the good (fast) ones is: I747UCDMG2
and on one of the slow data phones is: I747MVLUEMK5
What does this mean, that they are not the same?
liz.la said:
I just check 2 of the phones (they are all not with me now)
The baseband of one of the good (fast) ones is: I747UCDMG2
and on one of the slow data phones is: I747MVLUEMK5
What does this mean, that they are not the same?
Click to expand...
Click to collapse
Both are i747 version which is not international version, maybe Korean or something like that, try using only WCDMA this is constant 3G, and see if it works, if not, flash the latest software from sam mobile via Odin, but watch out you download for i747, not i9300 etc. There are many S3 variants.
I tried using only WCDMA with no success.
Do you have instructions of how to locate and flash the latest software? Also I know the phone is currently unlocked would this change that?
Thanks so much.
liz.la said:
I tried using only WCDMA with no success.
Do you have instructions of how to locate and flash the latest software? Also I know the phone is currently unlocked would this change that?
Thanks so much.
Click to expand...
Click to collapse
If it is unlocked, it shouldn't change that.
And note if changing software doesn't help then the chip might be damaged.
For software, go to www.sammobile.com and register, then go to browse firmware and select android/galaxy s3 bla bla.. until you get to country, there select your country, or go to top and select 'top 10 latest' and choose one that is different from yours.
You can know of it is different by the baseband name letters for etc 'XXUGNG3'.
Then download the software you want (it may take a while) and download Odin v3.09 (just type that in google you'll fond ot) and Samsung USB Drivers (also found on google easily).
Install usb drivers, reboot, open Odin, extract downloaded firmware, go to odin and select AP and then navigate to extracted zip and select you software.
Then put your phone in download mode: hold vol down+power+home and then vol up for continue when you see the picture, connect your phone and flash.
Also, please, about that, read here on xda and see tutorials on youtube, this has been answered multiple time and.i am one of rare users that will thoroughly help in answered questions.
I followed the instructions and flashed the phone. It did not help.
Any other ideas? One of the phones we got was brand new! I can't imagine there is a faulty chip in 3 out of 6 phones?
I am frustrated.
liz.la said:
I followed the instructions and flashed the phone. It did not help.
Any other ideas? One of the phones we got was brand new! I can't imagine there is a faulty chip in 3 out of 6 phones?
I am frustrated.
Click to expand...
Click to collapse
Are they unlocked? Of they are try another carrier, or try somewhere where the signal is at it's best reception.
If these simple methods don't work just get it analyzed in the service center, i doubt it can be software problem because you tried with another rom, also, when you'll try maybe changing carrier or going around town to see if it works, and it doesn't, then it is hardware problem, unfortunately.
Thank for all your help.
Nothing seemed to work.
I did try another carrier and it did not work.
I just can't imagine that 3 out of 6 phones have the same problem and 1 of them is new.
Could it be that the 3/4 G only works in the USA and not in foreign countries?