any solution for lobster mone 100 unlock?? picture here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
unlock by htc code order from gsmfather.com or unlockbase.com or allgsmunlock.com etc for about 20 eur.
Pay Virgin Mobile £20 or give money (or should that be MONET ;-) to www.imei-check.co.uk
Virgin will unlock it for free once you've credited the sim with 30 pounds.
grayme said:
Virgin will unlock it for free once you've credited the sim with 30 pounds.
Click to expand...
Click to collapse
Not anymore you can't, they stopped doing it for free in may unfortunately. So now we have to shell out £15 for virgin to unlock them.
In answer to the original posters question. I have spent days searching the internet recently for a free or at least relatively cheap way to unlock the lobster and the cheapest way I have found is to contact virgin and cough up £15.
I may the free unlock
I can find the unique 8-digits SIM unlockcode with the help of two files you must dump from your phone and email to me. Contact me by PM and I will make you a reasonable offer.
Connect the phone with a usb cable and make sure activesync is ready with syncing. To produce the required files run "simlock.bat" from the attached zip file on your PC. There will be two files called docid.bin and simlock.bin in the subdirectory "1" on your PC.
ECHO for mtty on my monet
Cmd>password bsad5SeoA
Invalid password.
HTCSFHTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x7940000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
jockyw2001 said:
I can find the unique 8-digits SIM unlockcode with the help of two files you must dump from your phone and email to me. Contact me by PM and I will make you a reasonable offer.
Connect the phone with a usb cable and make sure activesync is ready with syncing. To produce the required files run "simlock.bat" from the attached zip file on your PC. There will be two files called docid.bin and simlock.bin in the subdirectory "1" on your PC.
Click to expand...
Click to collapse
but how to active sync the device?? plz provide me detailed information..
dj.rachit said:
but how to active sync the device?? plz provide me detailed information..
Click to expand...
Click to collapse
Have you ever connected your phone to your pc to sync appointments and contacts? Just try and see what happens.
how to connect??? i have usb but no drivers..
jockyw2001 said:
Have you ever connected your phone to your pc to sync appointments and contacts? Just try and see what happens.
Click to expand...
Click to collapse
but i dun have any software regarding dis. i have usb cable..
lobster mone 100
thanks all member,,,,,,, i m new here
i have same lobster mone 100 i need remove security corde,any body help me?
Free htc Monet unlock solution
Hi everybody i have found an easy way to unlock Htc Juno also Know as T-mobil Shadow & Htc Excalibur, and HTC monet, I swear that i have unlock 2pieces of Shadow and 3 of Exca100, The solution is free for everyone, please send me a PM so that i can explain it to you, because there are to many sunday unlockers in my district that may profit of it i mean by selling the solution, I am from Senegal a french spoken country so it you want the solution send me a Pm or an email : [email protected]
jockyw2001 said:
I can find the unique 8-digits SIM unlockcode with the help of two files you must dump from your phone and email to me. Contact me by PM and I will make you a reasonable offer.
Connect the phone with a usb cable and make sure activesync is ready with syncing. To produce the required files run "simlock.bat" from the attached zip file on your PC. There will be two files called docid.bin and simlock.bin in the subdirectory "1" on your PC.
Click to expand...
Click to collapse
Hello mate, are you still able to unlock the HTC Monet - Lobster 700tv version locked to Virgin UK?
Related
Multi-Port/USB TTY is a software for HTC's PDA connect to bootloader console mode without a serial cable.
I did test the 1.11a version on my XDA2 and I can enter the Bootloader console mode and dump the rom to the SD Successfully!
It seems we don't need serial cable anymore!
BTW, is it ok to upload this utlity?
HI,
Where can i find it?
THe utility is here.
1. Kill the microsoft activesync beforce use it.
2. Backup your machine before use this utility, because this process will erase all of your data.
3. boot the machine into bootloader mode (hold the Power and directional pad , then push reset)
4. Run the rompdate utility, select the comport as "wceusb001" or something like that as the default comport.
In the terminal windows, you can do whatever you want, such as backup the CE rom to SD Card :
1. Put a useless >32M SDram in your XDA2, all data on the card will be erased.
2. In the terminal windows, enter "d2s" command and wait for your device copy the CE rom to the SD.
You don't need to buy serial cable anymore. :twisted:
Does the s2d command also work?
jonburge said:
Does the s2d command also work?
Click to expand...
Click to collapse
Didn't try, but I believe all XDA2 bootloader command should work.
killercheung said:
jonburge said:
Does the s2d command also work?
Click to expand...
Click to collapse
Didn't try, but I believe all XDA2 bootloader command should work.
Click to expand...
Click to collapse
Great program. Did you successfully able to do d2s ? What bootloader version do you have ?
thariman said:
killercheung said:
jonburge said:
Does the s2d command also work?
Click to expand...
Click to collapse
Didn't try, but I believe all XDA2 bootloader command should work.
Click to expand...
Click to collapse
Great program. Did you successfully able to do d2s ? What bootloader version do you have ?
Click to expand...
Click to collapse
Sure. My XDA2 come with a 1.01 bootloader.
killercheung said:
thariman said:
killercheung said:
jonburge said:
Does the s2d command also work?
Click to expand...
Click to collapse
Didn't try, but I believe all XDA2 bootloader command should work.
Click to expand...
Click to collapse
Great program. Did you successfully able to do d2s ? What bootloader version do you have ?
Click to expand...
Click to collapse
Sure. My XDA2 come with a 1.01 bootloader.
Click to expand...
Click to collapse
My bootloader is 1.02 probably it's broken. only s2d the command is recognize (but fail to make the actual backup ) the rest of the command give an error. I even try to put the password in but still no luck. Do you mind sharing the 1.01 bootloader ( http://www.xs4all.nl/~itsme/download/savebootloader.exe) ? Any clue on installing/replacing it ?
thariman said:
My bootloader is 1.02 probably it's broken. only s2d the command is recognize (but fail to make the actual backup ) the rest of the command give an error. I even try to put the password in but still no luck. Do you mind sharing the 1.01 bootloader ( http://www.xs4all.nl/~itsme/download/savebootloader.exe) ? Any clue on installing/replacing it ?
Click to expand...
Click to collapse
Are you sure this tools is for XDA2?
I have now idea if I can write a bootloader to XDA2 or not.
killercheung said:
Are you sure this tools is for XDA2?
I have now idea if I can write a bootloader to XDA2 or not.
Click to expand...
Click to collapse
I found it at http://www.xs4all.nl/~itsme/projects/xda/versions.html
But probably need to ask XDA developer Itsme he is the one who created the apps.
Just out of curiosity, if you don't mind could you check if your bootloader v 1.01 is fully implement. At least on the help level. You could go to bootloader screen (BACKUP first ) and type in:
password BOOTLOADER
h full
It should return the full help screen.
I done it successful.
The info as following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
d2s
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
pc->drive.total_lba=3D400
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=45B5
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=7A80000
SDCARDD2S+,cStoragePlatformType=FF
*******************************************************************************************************************************
Store image to SD/MMC card successful.
USB>
NOW, I have backup the rom to my SD card and how can i copy it from my SD card to my pc ?
It always said that the card is UNFORMATED..
great works for me 2
How can we extract the rom back-up from the SD card to the Hard Drive in an img file??
cheers,
Yann
use a hex editor
use a hex editor (like winhex) to copy it from sd (tools/disk tools/clone disk - then choose your SD and the target file name)
of course to do this a card reader needed
what should be also considered before making your backup to SD is filling the card with zero bytes (windows formatting won't do the trick - use winhex again)
not doing this means you'll have tons of rubbish on the card following your backup...
and one more comment: are you 100% sure that "d2s" will copy the ENTIRE rom image? on ipaqs you need to give the start address, as "d2s 0"...
ym
Hi to all
Its possible extract a rom from a tytn and install this rom so other tytn???
or we must use the ship version???
if it is possible how can we extract a rom and how we can convert it to flashable rom???
Thx
Short answer: It is not possible yet, you must wait for a shipped version.
Long answer: A ROM consists of 7 parts:
1. Extended ROM
2. OS Image
3. IPL (part of bootloader)
4. SPL (part of bootloader)
5. Splash screen
6. HTC Logo (normally uses the same image as the splash screen)
7. GSM radio code
You can dump the original rom, but only the things contained in the FLASH will be dumped, this does not include the IPL, SPL, splash and radio parts, so its unuseful for flashing it back.
I've updated the wiki with this answer, see here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Thx
For the Vv (very very) clear answer...
Please Help
Hey pof.
I was wondering if you could point me in the right direction with my problem.
I've tried to upgrade my HTC Tytn original ROM to JasJam ROM , right at the end (99%) the updating software stoped , gave me an error and restarted the computer. Now all i see on my tytn is dots with mixed colours all over the screen(not even a tri-color mode) it looks like a broken tv. Now i can't even sync it with my PC to install old ROM. Can't do anything with it now. the reason for this i guess is a ROM update that wasn't completed.
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Please help. Iam really desperate
slava888 said:
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Click to expand...
Click to collapse
Does it look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) try SD card flashing:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
2) If it doesn't work, put the unit in bootloader mode, disable activesync usb on your computer (Connection settings -> disable USB connection) and try to flash a ROM using the usual method.
Other than this... I can only tell you trying to get a repair under warranty
Hey pof. Thanks for the quick reply.
That is exactly how it looks !
Listen, somehow i've managed to get in to bootloader.
It shows on top:
HERM200
IPL-1.01
HERM200
SPL-1.04
I've tried to do the SD Rom update but it doesn't work. Just shows me the same bootloader screen with those two messages(above). Pushing the powere button doesn't do anything
The bootloader update didn't work either. when i typed in "set 14 0" it said "Write Nand Success" but when i soft reseted it , it still gave me that screen.
Any ideas what i can do? other then send it for repairs.
Thanks again.
Hope to hear from u soon.................iam freaking out here
Just tried SDCardFlashing with different ROM files.
With the original ROM it does not do anything (stays in the bootloader screen)
With JasJam (that's the one i've tried to install) it show "checking..." message on screen , but does not do anthing.............been like that for 10 minutes.
Can't believe i've screwed up so bad
At least bootloader is still "intact", the right NBH file should be the one matching your CID, assuming that you have a TyTN it should be the TyTN 1.18 rom.
If you can go into bootloader and send commands using mtty check your CID with command "info 2".
Also try to do a rom upgrade using the usual proces while the unit is connected in bootloader mode and activesync usb disabled, click on RomUpgradeUt.exe, then Next ,next, next... if it fails tell me which error you get and where.
Hey Pof.
when i try "info 2" command , it just hangs without any output. and i can no longer type in commands.
I've tried to run RomUpgradeUt.exe
This produced ERROR[222]: DEVICE NOT RESPONDING. I get it at the end , after the updater asks me for final confirmation.
...............................
Read this thread, from post #11 until the end
http://forum.xda-developers.com/showthread.php?t=278025
Try to put USB monitor (instructions on post #11) and see if you get any output from the device... attach the USB capture here if you want, I can have a look at it.
Hey Pof.
Did everything like you said.
Here is the output.
P.S: didn't allow me to upload WinAce archived files so i upload the text file, its pretty small.
slava888 said:
Did everything like you said.
Here is the output.
Click to expand...
Click to collapse
The RUU sends "task 32 ; info 2 ; info 3" commands to bootloader, but you get no output from it, I think it's screwed because none of the three commands is answered by your device.
Normally, task 32 should return the seclevel, usually 0xFF ; info 2 should return the CID (in TyTN it is QTEK_001) and info 3 should return the block to calculate the dynamic password to be able to use wdatah command. Without wdatah you cannot flash
Do you have warranty on your device?
Yes its still under waranty , i purchased the device couple of weeks ago. Iam going to call them today.
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Just wanted to tell you that i really appreciate your effort. Thank you for everything.
slava888 said:
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Click to expand...
Click to collapse
HTC has not "officially" released any rom for the hermes yet, the tytn rom we have on the ftp is leaked from dangaard NL, so you cannot say you've been trying to upgrade the rom because they will tell you there are no rom upgrades available yet.
If you are not in a hurry to have your phone back you can wait until they release a ROM upgrade and then tell them the "truth"... but i don't know if they will be able to see that you flashed Imate ROM and not HTC ROM (and flashing another brand's rom voids your warranty). If they don't notice it, the repair should be under warranty and no charges for you.
If you are in hurry, just tell them you tried to flash the imate jasjam rom (downloaded from imate ftp) and phone screwed, they will charge you some money to repair / flash back the original htc rom on your device and return it to you, but you'll have to pay because this is not covered by the warranty.
I don't know how much will they charge you for this, but you can explain them by phone and ask...
After a hard reset my HD was fast again and no errors. I installed all software I need, and before that I could copy files to the micro-SD of my HD2 from Win 7 Explorer while Active Sync was activated. Now after setting up everything I get an error everytime I want to copy a file that explorer cant copy the file. Using the SD-card as HDD causes no such errors. Only when Active Sync and Mobile center are active. This happens not all the time, but most of.
The pic shows the software i installed to my HD2 (internal on phone)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What happened?
Help? Anybody?
key-seven said:
After a hard reset my HD was fast again and no errors. I installed all software I need, and before that I could copy files to the micro-SD of my HD2 from Win 7 Explorer while Active Sync was activated. Now after setting up everything I get an error everytime I want to copy a file that explorer cant copy the file. Using the SD-card as HDD causes no such errors. Only when Active Sync and Mobile center are active. This happens not all the time, but most of.
The pic shows the software i installed to my HD2 (internal on phone)
What happened?
Help? Anybody?
Click to expand...
Click to collapse
This has been covered many times before , and with a search you might have found it but i will go over it again ....
This has been a known issue with Activesync for a long time, I say known but less common, it is more common with W7, but still there is no rhyme or reason as to what machines/phones it affects, (if someone knows please tell me), it has to do with the conversion module in activesync, but that is all I know about it ...
The Way around it is SIMPLE, connect your phone to the pc and "forget activesync exists", and when the little box on your phone pops up asking how to connect select disk drive ... Your phone will then show up as a removable drive and you can copy files fine ...
If you no longer get the popup box goto "Start Menu>Settings>Connections>USB to PC" , and check the little box that says "Ask me ......."
Thx. Yeah, maybe I could have used the search more precisely. And what you wrote lets me hesitate in Microsoft once more. But hey - ok, I can live with that. And using the card as drive is what I´ve been doing since and ever when this bug/error appears. Thx anyway.
(Was just thinking it had something to do with some app I installed or something, sorry for wasting your time btw)
try settings menu all settings connections usb to pc and UNtick "faster data transfer.
seems to help for some.
samsamuel said:
try settings menu all settings connections usb to pc and UNtick "faster data transfer.
seems to help for some.
Click to expand...
Click to collapse
Yeah forgot that ...
I have been looking around at this, I think it actually may have to do with a codec issues, when you install 3rd party codecs it may screw up the built in conversion in activesync, even though the file does not really need to be converted, when activesync goes to check the file to see if it does need converted it bombs ....
Ok, thx you two.
I figured out now that it must have to do with this error report.
communication (0x80072745) error connecting Windows Mobile device
Source: RapiMgr
Event-ID: 8
I updated the driver for the mobile device via online update at the hardware manager snap-in and since then this sporadic appearing error did not occur again. Hope this was the solution.
I really hope so.
Good day everybody,
I'm running into a problem, it is killing me and can't solve it, please help me out
I want to root my htc Legend to install a coocked ROM, and as you know I have to prepare a goldCard first.
The problem is with the goldCard where I can't complete the the steps successfuly!
When I open the "Cmd" of (Windows 7 64-bits)
When I write this comand "adb devices" I get the number for the device connected to my PC.
but when I write the comand that should give me the big number that should be used to creat the goldCard
"adb shell cat/sys/class/mmc_host/mmc1/mmc1:*/cid"
I got a message saying that "not found"
this is a print screen of the problem, and please help me out in this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
try using this
Code:
cat /sys/class/mmc_host/mmc0/mmc0:*/cid
Hitmax117 said:
try using this
Code:
cat /sys/class/mmc_host/mmc0/mmc0:*/cid
Click to expand...
Click to collapse
Also, try running cmd prompt as administrator... right click on cmd shortcut and run as admin... on a side note... i had problems with the procedure on making my gold card o nmy win 7 32 bit... but luckily i had vmware and ran it on my old faithfull winxp and everything when smoothly...
still stuck ,,,, please help me out
post IO of "cat /sys/class/mmc_host/mmc0/mmc0:*/cid"
50-3 said:
post IO of "cat /sys/class/mmc_host/mmc0/mmc0:*/cid"
Click to expand...
Click to collapse
What do you mean ??? I didn't understand!!!
Hitmax117 said:
try using this
Code:
cat /sys/class/mmc_host/mmc0/mmc0:*/cid
Click to expand...
Click to collapse
Wow You made my day, thanks brother it worked fine.
My problem was not leaving a space between cat and /
thanks for your help
still facing a problem in rooting my legend
i'm done with making the gold card but I'm stuck now on the steps where I open the CMD and right the following comandns
step1-windows.bat and step2-windows.bat
attached is the result of writing the codes,
any help please!!!
ZeroNEX said:
still facing a problem in rooting my legend
i'm done with making the gold card but I'm stuck now on the steps where I open the CMD and right the following comandns
step1-windows.bat and step2-windows.bat
attached is the result of writing the codes,
any help please!!!
Click to expand...
Click to collapse
try a few times, the timing of pressing the buttons is important
and did you connect your phone correctly?
I trid so many times, but still the same problem
I think yes, I connect my phone correctly with USB cable...
the first step I did it with the phone connected with usb and it's in boot menu
the second step is with the device in recovery mode and the screen shows a mobile picture with this sign " ! " in red color ..
any help guys
Just to make sure, you have HTC Sync 2.0.33, correct?
At the red !, try vol up + power (should bring you to custom recovery screen, every time I reboot to recovery I need to do that). Select wipe/factory reset, then go to flash zip from sd and rootedupdate.zip. (assuming file name)
Helllloooo, any body help please!!!!
Make sure you have HTC Sync version 2.0.33 installed and any previous versions of HTC Sync are un-installed.
I will check that and start over again
I'm really tired of this, the first legend I did root it and install a new custom rom without any problems
this time with this phone, its is killing me :|
Plz refer to my thread in development forum named rooting made easy
Sent from my HTC Legend using XDA App
aelsharawi said:
Plz refer to my thread in development forum named rooting made easy
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
I tried it but I got stuck on "step2-windows.bat"
I even have doubt about succeded at "step1-windows.bat" !!!!
any hints please
ZeroNEX said:
I tried it but I got stuck on "step2-windows.bat"
I even have doubt about succeded at "step1-windows.bat" !!!!
any hints please
Click to expand...
Click to collapse
post your output please.
Maybe step 1 is failed....you see,it said "customer id check fail"(line 15 in the cmd window). Have you make the goldcard ok?Or did your legend run Android 2.2?If it is 2.2,you must downgrade your system first....
you have HTC Sync
There are some tools for that.search google for it!It will do everything automatically without problems do you.
Sent from my Legend using XDA App
www.gcprokey.com
Using Version...1.0.0.0017
Selected Task HTC Sprint Unlock(ADB)
Searching ADB device Please wait..
Device Detected...
model:= 0PJA2
Androids Version:= 5.0.2
Description Version:= 1.32.651.17 CL496080 release-keys
Platform:= msm8994 [ htc_hima ] [ msm ]
Baseband:= [email protected]
Simstatus:= ABSENT
IMEI-1 = null or empty
ANDROID-ID = HT54BSV06153_0000C7CEFC
Detected su binary at /xbin
SU Version..2.49:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...
HTC SPRINT UNLOCKING STARTED...
Checking Data...
Waiting for Loader...
Loader Ok...
Direct Unlock Success...
MSL/SPC IS := 74xxxx
!!! Success !!!!
Restarted phone...
Total Time Take...00:00:27
Log Saved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so this unlocked SIM??? btw...u may want to mask your IMEI & serial #
cemalefendi said:
www.gcprokey.com
Using Version...1.0.0.0017
Selected Task HTC Sprint Unlock(ADB)
Searching ADB device Please wait..
Device Detected...
model:= 0PJA2
Androids Version:= 5.0.2
Description Version:= 1.32.651.17 CL496080 release-keys
Platform:= msm8994 [ htc_hima ] [ msm ]
Baseband:= [email protected]
Simstatus:= ABSENT
IMEI-1 = null or empty
ANDROID-ID = HT54BSV06153_0000C7CEFC
Detected su binary at /xbin
SU Version..2.49:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...
HTC SPRINT UNLOCKING STARTED...
Checking Data...
Waiting for Loader...
Loader Ok...
Direct Unlock Success...
MSL/SPC IS := 74xxxx
!!! Success !!!!
Restarted phone...
Total Time Take...00:00:27
Log Saved
Click to expand...
Click to collapse
there some programs like hamachi but instead of sharing LAN network you can share usb ports can we test if you can remotely unlock my m9 ???
You can get your sim unlocked via MSL code/having the phone paid off or off contract. I did it and a simple ota came to my phone and refreshed the profile. I am internationally and DSU unlocked.
asacado said:
You can get your sim unlocked via MSL code/having the phone paid off or off contract. I did it and a simple ota came to my phone and refreshed the profile. I am internationally and DSU unlocked.
Click to expand...
Click to collapse
what if im out of US:crying: , if some one just pull that OTA may we can see whats inside and how that OTA unlocks the phone..
@cemalefendi dont leave us...
They have just release update 24 which includes Sprint unlock for M9. Someone should purchase and charge $10 per unlock to cover costs. I can do it but would want to make sure people would be keen? I don't need it for any other functions
elmy2424 said:
what if im out of US:crying: , if some one just pull that OTA may we can see whats inside and how that OTA unlocks the phone..
Click to expand...
Click to collapse
Usually the way it works is you have to have it active on the network to unlock it through the international department for international sim unlocks. The other thing about domestic is simply getting the MSL (6 digit code) which can get you access to the LTE bands and unlock GSM.
asacado said:
Usually the way it works is you have to have it active on the network to unlock it through the international department for international sim unlocks. The other thing about domestic is simply getting the MSL (6 digit code) which can get you access to the LTE bands and unlock GSM.
Click to expand...
Click to collapse
MSL is easy to get. Where is it entered though?
This other way works well... just wondering as I have read about MSL unlock...
Thanks