Hi all!
I'm new on the forum but it is quite a long time I read it. I'm italian.
I followed the guides to Hrd Spl and I upgraded my vodafone 1605 to WM6 using the Schap's rom 3.54 ITA and everythying is working fine. I have only one problem: when I had the original WM5 vodafone rom I was able to connect to internet using my Tytn as a modem as follows: programs>wireless modem>start.
Now, with the new rom I'm not able to connect to internet using the tytn as a modem but just by itself. When I connect my Dash using the USB cable, select the Internet Sharing option under Settings, it creates this "Windows mobile Internet sharing device" but this not allows mr to surf with my Laptop.
What can I do to solve this problem? I have tio downgrade again to WM5 or there is a possibility to solve this problem? Please let me know! Thank you so much
Have you tried...
After flashing your phone were you able to browse the web using the phones internet browser. If not then you are probably missing the data connection settings for your phone, once they are in place then the phone as modem/internet sharing option should work again. If you don't have those settings for your cellular carrier then you could always flash their rom back to the phone, lookup the settings, and then flash Schaps ROM again and input the network settings.
Good luck,
Sam
Related
I just flashed the ROM to the 2.06 (or whatever) version of the Hermes that has PTT. But the Wireless Modem program is GONE! I don't know if they took it out, or just haven't implemented it yet. Everything else seems to be there; it's this sole program that's missing. How do I get it back??
Old "wireless modem" has been replaced by "Internet Sharing" on newer (AKU 3.3) roms.
How do I access this internet sharing? Does it have the same features?
It seems that I shouldn't have used SPB Backup...I guess there's no way around re-installing everything. Thanks for the heads up.
pof said:
Old "wireless modem" has been replaced by "Internet Sharing" on newer (AKU 3.3) roms.
Click to expand...
Click to collapse
I am in the similar situation. How to use "Internet Sharing" to make the 8525 as a wireless modem for my notebook? Thanks.
Missing wireless mondem and no internet sharing
I am also missing the wireless modem icon under connections after upgrading my firmware, i also cannot find internet sharing.
I am still using WM5
Can anyone help?
Cingular's response to Internet Sharing
I just had a conversation with Cingular's tier 2 support on the Internet Sharing issue. He claims that you need to subscribe to their $59.99 internet package and not the $39.99 PDA package andsomehow magically things will work . . .
I am attempting to connect to an XP Pro acer laptop and the lapto does not recognize the handset as a modem when the internet sharing is 'connected' and I cannot find a driver that works.
The phone is new but I had to update it to the new Cingular ROM because it came with the old one that had the Wireless Modem app not the new Internet Sharing.
There has got to be a way around this . . . .!
bduerr said:
I am attempting to connect to an XP Pro acer laptop and the lapto does not recognize the handset as a modem when the internet sharing is 'connected' and I cannot find a driver that works.
Click to expand...
Click to collapse
Quote:
Originally Posted by allroader
Any pointers on where the new USB driver is? I use my 8525 to connect to the internet.
Are you using Vista???? If so use the following link. Also start using google search and read the WIKI. And dont forget MRVANX guide.
http://forum.xda-developers.com/showthread.php?t=305550
XP drivers on the original CD
Just got it working on XP
stukes said:
Quote:
Originally Posted by allroader
Any pointers on where the new USB driver is? I use my 8525 to connect to the internet.
Are you using Vista???? If so use the following link. Also start using google search and read the WIKI. And dont forget MRVANX guide.
http://forum.xda-developers.com/showthread.php?t=305550
XP drivers on the original CD
Click to expand...
Click to collapse
Tnx, but I rebooted the 8525 and the XP Pro Laptop, then everything seemed to work. There was actually no setup required. Instead of working like my 8125 where there was a connect step, it sets up as a simple data connection automatically. The onlything i see is the phone connecting to GPRS when you hit connect! I hate cockpit trouble . . .
Hi Guys,
with the Original o2-Rom and WM5 it was possible to setting up a Modem Connection via USB for my Notebook with the Tool "Modem Connection".
I want to Install my Prophet as Modem for my notebook.
How to do that with WM6 and the new Rom 4.0.0.0.4 PV?
Unfortunately theres no tool with that name...
Anybody ideas?
so long,
cheGGo
I have the same problem. I solve it in this way:
Set your network on PDA.
Open "Sharing internet"
Select PC connection Bluetooth PAN
Network -> your network (Vodafone for me)
CLick Connect
This way work for me...
Hi alchemist...
yessss
thank you
its regrettable that i could not manage my connections via notebook, but this solution works fine as well
Baii cheGGo
cheGGo said:
Hi alchemist...
yessss
thank you
its regrettable that i could not manage my connections via notebook, but this solution works fine as well
Baii cheGGo
Click to expand...
Click to collapse
The Bluetooth stack not support remote connection, I think...
Which way to discover my BT stack version?
If I pair my pda with my nb I can select Network dialup service...Is the service that I need?
sorry for my en!!!
Hello guys. I´m kind of new to this forum and also to the hermes mobile device. I got a TyTn and i flashed it with the Shaps 3.60 ROM
My first question, witch might be stupind enough, is what does the radio do? i´ve seen some posts about upgrading the radio version and I would like to know what exactly this thing envolves and how do I chose the best radio version to fit my device. Does it depend on the network operator, or the services I´m using?
Second question is that after installing the new Shaps ROM my TyTn gives me a warning message saying that it wasn´t able to obtain an automatic IP and to check my Connection Settings. The IP asigned is from the same class as the one from my PC. Before installing the ROM it worked, now i can´t surf on the net through ActiveSync. Besides that, how can i use my PC as a wireless server for my TyTn? my device connects with the PC but the IP class is different.
Please help
Check the wika-wika-WIKI!
mcorrie1121 said:
Check the wika-wika-WIKI!
Click to expand...
Click to collapse
i've read that topic, but still need a recommendation for a radio update. Anyone can help me chose the best radio update? Orange carrier, Romania
Hi everybody,
I got my new HD2 (original german Vodafone rom) last Friday and got it running very well if there wasn't that WLAN problem:
When connected to my Speedport W920V via WPA2 the phone does not get any access to the internet via WLAN. 3G works fine.
When I try to ping the phone the pings get back.
The strange thing is: Connecting to a friend's WLAN on a FritzBox get's me an access to the internet as well as an AdHoc connection to my laptop does.
What I tried since:
various hard- and softresets
deleting and setting it up again the wireless connection
removing any encryption on the accesspoint
updating HSPL with HSPL3
updating to 3.14 german original HTC
Nothing of that worked.
It would be great if you got some ideas for me!
Best regards from Germany
raid IO
one thing is important to know sir latest stock ROM (3.14) isn't compatible with HSPL.
it cause lot of troubles. so test it without HSPL on your stock ROM 3.14
Hi there,
i am running a HTC LEO Branded by Vodafone on Win Mobile 6.5 Professional.
Rom Version 3.14.162.5 (04666) GER
Radio 2.15.50.14
I was doing a Vodafone branded Rom-update 2 days ago.
Everything was fine just one thing went bad.
Before I was doing the update, I was connected with 2 wlan-server.
one server is based at home, one is based at work.
After the update I can´t see my wlan-server at work any more.
connecting with the server at home is allright and I also can see the wlan-servers of my neighbours but I can´t see my wlan-server at work even if I´m standing right in front of it. (On our laptops we can see the server and my friends also see the server with their smartphones).
Any Idea what I can do??
I tried to connect manually - no success
I tried to delete the connection - no success
I can´t even see the wlan-server in the list.
Is there any chance to change/delete something in the registry??
I tried to solve the topic with the help of htc but they have no idea because some server can be seen......
:-((
please help me!!
lastesel
The work one may be set to not show its SSID? meaning manually adding the network.