GPS Questiona - Mogul, XV6800 ROM Development

Ok, so thanks to the help of a bunch of people I was able to flash my xv6800 with the latest rado and os ROMS. I started playing with the GPS now.
I've followed the instructions in the FAQ thread here: http://forum.xda-developers.com/showthread.php?t=363431
Enabled location in phone settings, downloaded and installed VisualGPsce and the Gps Viewer but I cannot get any response from any satellites.
GPS Viewer, when I turn it on has all kinds of info scrolling in the message box but never even hints at connection.
Before I activated my phone after flashing the new ROMS today, I saw what I thought was the GPS icon on my phone. But after doing *228 (I think that's it) on Verzion the icon is gone. May just be a coincidence but maybe not.
Thanks for any help.

Edit: What ROM, RADIO, and PRI are you using? "latest" doesn't mean much. Need specifics. You can check this under Device Information control panel.
Install google maps
set the com port to 4, baud 4800.
Enable GPS in Google Maps
See if it says Seeking Sattelites (0) and if hte number changes. If it does it's finding sats.
Also make sure you're trying this outdoors.
Lastly I'd do the aGPS fix for Verizon that gc14 posted. WOAH faster locks.

ROM iw dcd 3.2.6 radio is 3.42.50.
I did load google maps and the number sits at 0. I have tried this outside with my garman right next to it and it was able to connect.

Protonus said:
...PRI are you using? "latest" doesn't mean much.
Click to expand...
Click to collapse
And what PRI are you using?
And have you done the aGPS fix?

Protonus said:
And what PRI are you using?
And have you done the aGPS fix?
Click to expand...
Click to collapse
Sorry missed that question. PRI version is 1.35_002. Haven't done the aGPS fix.

SneekyPete said:
Sorry missed that question. PRI version is 1.35_002. Haven't done the aGPS fix.
Click to expand...
Click to collapse
Makes a pretty big difference. I actually get a fix indoors.

SneekyPete said:
Sorry missed that question. PRI version is 1.35_002. Haven't done the aGPS fix.
Click to expand...
Click to collapse
Just do yourself a favor and do the aGPS fix. It works. Follow gc's wiki EXACTLY.
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
Look it over, print it out, and follow it precisely..... then fire up the GPS and smile.

tntopspin said:
Just do yourself a favor and do the aGPS fix. It works. Follow gc's wiki EXACTLY.
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
Look it over, print it out, and follow it precisely..... then fire up the GPS and smile.
Click to expand...
Click to collapse
Ok, aGPS solved my problem. When I read the info on it it seemed optional but I'm guessing its pretty much necessary.

Thanks for the help guys. This board is a great service!

WOW WOW WOW!!!!
I have NEVER been able to have any satellites find me, and I just did the AGPS fix and used GoogleMaps and it WORKED!!!
I am so excited!! Thank you all - especially gc!
I got gps working and I was inside too!! I love this place!

dental4usa said:
WOW WOW WOW!!!!
I have NEVER been able to have any satellites find me, and I just did the AGPS fix and used GoogleMaps and it WORKED!!!
I am so excited!! Thank you all - especially gc!
I got gps working and I was inside too!! I love this place!
Click to expand...
Click to collapse
Yeah the guys around here are extremely helpful.

Ok I can not get the phone into dmr mode by dialing ##3424. I have also tried to find a way to put in a command line on my phone with no success. Can someone please help point me in the right direction?

jray1 said:
Ok I can not get the phone into dmr mode by dialing ##3424. I have also tried to find a way to put in a command line on my phone with no success. Can someone please help point me in the right direction?
Click to expand...
Click to collapse
I don't think you run it from command line persay but run it by using file explorer and clicking on the file. I could be wrong though as I'm still learning this stuff.

jray1 said:
Ok I can not get the phone into dmr mode by dialing ##3424. I have also tried to find a way to put in a command line on my phone with no success. Can someone please help point me in the right direction?
Click to expand...
Click to collapse
if you use a file explorer like GSFinder you can go to your windows folder find DMRouter click and hold until you get a pop up to select open then select parameter then type in \Diag and hit ok... check the wiki page my backslash might need to be a foward slash I can remember right now to damn early

Does this work for ALLTEL? My gps already does work but it takes a FEW minutes to find satellites!!

Tried the file explorer found the router but it does not allow me to open it or do anything with it .

Dloe2679 said:
Does this work for ALLTEL? My gps already does work but it takes a FEW minutes to find satellites!!
Click to expand...
Click to collapse
Follow Shadow-Tech's Guide for aGPS on Alltell.... HERE

Alltel has different PDE server info. But I think you can apply the same method using that info. I believe it's posted somewhere on this site and/or the PPCgeeks site.
as a side note, for Bell users:
I am on Bell, and for some reason I didn't have to do this method to get my aGPS to work. If you install the Bell carrier cab from dcd and update the PRI, the aGPS just works. It has something to do with the NV setting? I would love to understand more about why mine was so simple. The thread that I used was this:
http://forum.xda-developers.com/showthread.php?t=419855
Can someone explain what the newest PRI does and why aGPS all of a sudden works? I'd be most appreciative.

Any other ideas to try I would love to get this up and running .

THANKS NITRO! I will try this out and post my results.

Related

TomTom 7 in Flight Mode

Im wondering if theres a way to get TomTom 7 to work in flight mode as I used to be able to do on TomTom 6. Im not sure if its the rom, radio or software. Thanks
This was discussed elsewhere:
http://forum.xda-developers.com/showthread.php?p=2538917
scrawnyb said:
This was discussed elsewhere:
http://forum.xda-developers.com/showthread.php?p=2538917
Click to expand...
Click to collapse
Thanks Scrawnyb. Wondering if you found that your settings made a difference for your Geocaching? I'm using my XV6800 for Geocaching (using Geoscout) and loving it. I've made your changes but won't be able to get out to cache until next week and wondered about your findings. Thanks again!

Official Bell Mobility GPS/aGPS Discussion Thread

Please post all discussion/issues/comments regarding Bell Mobility GPS/aGPS in this thread.
aGPS locking up
I'm running Bell, dcd 3.2.5, radio 3.42.50 with aGPS working just fine, for a while. After a couple of times of turning the screen off (Power button), or standby, or whatever you call that mode...TomTom 7.450 (and GPStoday and Intelligolf all latest versions) stop locking via aGPS. Normally I get locks in 5-10 seconds with all these programs but afterwards I get nothing. TomTom shows satellites but won't lock on to any of them.
Please ask me questions if I missed anything. Any ideas?
I used to have the same issue. I upgraded to dcd 3.2.6. Still with radio 3.42.50. I also did the aGPS setting enable per another thread. Since then, I no longer have that problem. I get quick satellite fixes for days on end without the need to soft reset.
Power mangement
Hi all,
easy fix, I had the same issue. It is the power management. Once you put your phone to stand by the GPS will not come back up unless you use Quick GPS (don't know why but it bring is out of standby) or you can do the following regedit.
In the regestry I found these settings for power management.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Interfaces]
"{EB91C7C9-8BF6-4a2d-9AB8-69724EED97D1}"="Power-manageable display"
"{98C5250D-C29A-4985-AE5F-AFE5367E5006}"="Power-manageable NDIS miniports"
"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}"="Power-manageable block devices"
"{A32942B7-920C-486b-B0E6-92A702A99B35}"="Generic power-manageable devices"
Each one of the {} strings are an IClass for other device including the GPS. The one found in the GPS was this "{A32942B7-920C-486b-B0E6-92A702A99B35}. When I deleted the IClass string out of the following keys, you are now able to put your phone to standby and the GPS will keep running.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GPSID]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialGPS]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
Thanks for the info guys! I'll try deleting the registry items first and see what happens.
AGPS and Data usage
Hi, I am hoping someone can answer this for me, does AGPS use data, is it costing me money to use it? I have read many posts and still I am confused. I am using dcd rom 3.2.6, radio 3.42.50 PRI 2.02_007. Thanks
I noticed a significant decrease in lock times after going to PRI 2.02_007, FWIW.
incenseguru said:
Hi, I am hoping someone can answer this for me, does AGPS use data, is it costing me money to use it?
Click to expand...
Click to collapse
Yes, by default the assisted mode will request to transfer small amounts of data (download satellite ephemeris data) over the network everytime the GPS is initiated and when satellite coverage is obscurred (location determination from a IP defined assistance server).
I have confirmed this with my online data summary with Telus.
Thanks for the for the help.
CarmeloR said:
When I deleted the IClass string out of the following keys, you are now able to put your phone to standby and the GPS will keep running.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GPSID]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialGPS]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
Click to expand...
Click to collapse
Thank you! This works perfectly.
ande8150 said:
I noticed a significant decrease in lock times after going to PRI 2.02_007, FWIW.
Click to expand...
Click to collapse
What kind of lock times are you seeing? I'm seeing 10-15 seconds. I'm fine with that.
88fingerslukee said:
What kind of lock times are you seeing? I'm seeing 10-15 seconds. I'm fine with that.
Click to expand...
Click to collapse
About 10 seconds. It was way longer before. Sometimes a few mintues.
I'm running DCD 3.2.6 with radio 3.42.50 and PRI 1.34_007. I have ridiculous lock times most of the time. I don't use QuickGPS or anything else other than Google Maps. I've waited minutes sometimes to get a lock. I live in Milton, ON, and use GPS typcially anywhere in that area and the GTA (Toronto) area. I don't use GPS all that often and perhaps that's why is slow to lock each time I try and use it?
Regarding the PRI comment made earlier in this thread. I'm curious how you upgrade your PRI? I've tried the "Update PRI" icon in Settings | Connections, and although it reboots after doing something it's always the same rev afterwards. It also returns an error after it tries to update and prior to the reboot -"backup EFS failed" in a window with a window title of "PPST". Tap okay to that window and the phone soft reboots and nothing has changed.
I also could not update PRI using the icon provided by DCD. He provided the attached cab version in another post. You will have to install it on your device, then run /windows/ppst.exe
Also, be sure to do the GPS fix found at this link:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
These 2 things should fix your lock times.
ande8150 said:
I also could not update PRI using the icon provided by DCD. He provided the attached cab version in another post. You will have to install it on your device, then run /windows/ppst.exe
Also, be sure to do the GPS fix found at this link:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
These 2 things should fix your lock times.
Click to expand...
Click to collapse
I concur, these are the same steps I followed to get aGPS working.
ande8150 said:
I also could not update PRI using the icon provided by DCD. He provided the attached cab version in another post. You will have to install it on your device, then run /windows/ppst.exe
Also, be sure to do the GPS fix found at this link:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
These 2 things should fix your lock times.
Click to expand...
Click to collapse
S-W-E-E-E-E-T! Performed both steps, and got my first lock in about 20 seconds. I'll test it over the next few days in different areas to see if this is now the norm. Many thanks for the info.
No problem. Enjoy!
I am running DCD 4.1.2 and Radio 3.42.40... Of course I am will Bell...lol
My GPS Radio got signal ONCE and never has sice. Do I need to perform the two mentioned steps above?
The Carrier CAB install.
The QPST Modifcations/Fix.
Let me know!
mcfz said:
I am running DCD 4.1.2 and Radio 3.42.40... Of course I am will Bell...lol
My GPS Radio got signal ONCE and never has sice. Do I need to perform the two mentioned steps above?
The Carrier CAB install.
The QPST Modifcations/Fix.
Let me know!
Click to expand...
Click to collapse
Definitely install the carrier cab file (are you getting data right now?) and perform the GPS fix. Beware of the PRI update as I have had issues with PRI 2.02_007.
88fingerslukee said:
Definitely install the carrier cab file (are you getting data right now?) and perform the GPS fix. Beware of the PRI update as I have had issues with PRI 2.02_007.
Click to expand...
Click to collapse
Right now the phone isnt doing squat. I think I am going to downgrade my DCD a lower version then run the carrier cab and GPS fix...
I will do it up and post if I need help

Titan GPS problem

I hope someone can shed some light on this.
I have follow all the instruction that I could find to setup the aGPS on this phone.
The problem is, some time it only take about 10 to 20 seconds to lock on the satellite. Some time it takes a long time like 10 to 15 minutes, and sometime never.
I would like to get to the end of this. I have cooked and uses DCD's Rom, none of which makes any difference.
I must have flashed this phone for over 20 times and ech time with the same results.
It would work mostly in the day time (afternoon) but not at night or early AM.
Hope someone would be able to point me to the right direction.
Thanks in advance.
Update 10/17/08
Here is what I have done wrong. I have remove/delete my data connection from the phone .
"Wifi will not work with the PDE Server. It will prevent the agps data from being downloaded if it is on."
"This requires a data connection. It will use 100 bytes (1/10 of 1Kilobyte) when accessing the PDE servers."
Update! This Works without connecting to data!
Go to your Comm Manager, switch to Flight Mode, switch back to Phone mode, launch your GPS program.
Works every time for me so far. I have tried TomTom and Garmin so far.
tssi said:
I hope someone can shed some light on this.
I have follow all the instruction that I could find to setup the aGPS on this phone.
The problem is, some time it only take about 10 to 20 seconds to lock on the satellite. Some time it takes a long time like 10 to 15 minutes, and sometime never.
I would like to get to the end of this. I have cooked and uses DCD's Rom, none of which makes any difference.
I must have flashed this phone for over 20 times and ech time with the same results.
It would work mostly in the day time (afternoon) but not at night or early AM.
Hope someone would be able to point me to the right direction.
Thanks in advance.
Click to expand...
Click to collapse
We need specifics such as Radio Version, carrier, ROM version, SPL version, etc. Post all of this and whatever steps you took in the order you took them and we will be better suited to help you.
Thanks and good luck!
scrosler said:
We need specifics such as Radio Version, carrier, ROM version, SPL version, etc. Post all of this and whatever steps you took in the order you took them and we will be better suited to help you.
Thanks and good luck!
Click to expand...
Click to collapse
Carrier: Telus
Radio: 3.42.50
Rom: 3.57
SPL: 2.47
PRI Version: 2.03_003
tssi said:
Carrier: Telus
Radio: 3.42.50
Rom: 3.57
SPL: 2.7
PRI Version: 2.03_003
Click to expand...
Click to collapse
Thanks.
Now what have you DONE? Have you applied the TITAN aGPS fix found in the WIKI (http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix) ? You will need to find the Telus aGPS settings but the entire first portion is relevant. Try that and let us know then what happens. Also, make sure your location in "Phone Settings" is set to on. BTW, why a custom ROM when Telus has a pretty solid GPS rom out?
I also BELIEVE this is the correct IP and Port for Telus. I found it at this link from PPCGEEKS... (http://forum.ppcgeeks.com/showthread.php?t=36377&highlight=Bell+aGPS)
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = mobile
scrosler said:
Thanks.
Now what have you DONE? Have you applied the TITAN aGPS fix found in the WIKI (http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix) ? You will need to find the Telus aGPS settings but the entire first portion is relevant. Try that and let us know then what happens. Also, make sure your location in "Phone Settings" is set to on. BTW, why a custom ROM when Telus has a pretty solid GPS rom out?
I also BELIEVE this is the correct IP and Port for Telus. I found it at this link from PPCGEEKS... (http://forum.ppcgeeks.com/showthread.php?t=36377&highlight=Bell+aGPS)
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = mobile
Click to expand...
Click to collapse
I have done all of the above
Thank you!
Here is what I have done wrong. I have remove/delete my data connection from the phone .
"Wifi will not work with the PDE Server. It will prevent the agps data from being downloaded if it is on."
"This requires a data connection. It will use 100 bytes (1/10 of 1Kilobyte) when accessing the PDE servers."
tssi said:
I have done all of the above
Thank you!
Here is what I have done wrong. I have remove/delete my data connection from the phone .
"Wifi will not work with the PDE Server. It will prevent the agps data from being downloaded if it is on."
"This requires a data connection. It will use 100 bytes (1/10 of 1Kilobyte) when accessing the PDE servers."
Click to expand...
Click to collapse
Ahhh, yes, that would do it. Why did you delete it anyways?
scrosler said:
Ahhh, yes, that would do it. Why did you delete it anyways?
Click to expand...
Click to collapse
I'm not on a data plan. And was costing me $150 for the first month of usage.
Is anyone know if there is a way to get around about the GPS without using data?
tssi said:
I'm not on a data plan. And was costing me $150 for the first month of usage.
Is anyone know if there is a way to get around about the GPS without using data?
Click to expand...
Click to collapse
There is not.
scrosler said:
There is not.
Click to expand...
Click to collapse
I might have found a way. I'm testing this and will report back.
aGPS with no data connection work!
Update! This Works!
Go to your Comm Manager, switch to Flight Mode, switch back to Phone mode, launch your GPS program.
Works every time for me so far. I have tried TomTom and Garmin so far.
Update post #1
Thanks scrosler
tssi said:
Update! This Works!
Go to your Comm Manager, switch to Flight Mode, switch back to Phone mode, launch your GPS program.
Works every time for me so far. I have tried TomTom and Garmin so far.
Click to expand...
Click to collapse
Switching to flight mode is a way to clear any hung data connections.

gps for verizon

I tried the methods described in the forums to unlock the gps on my vx6800 , but i have no luck at all. Still not finding satellites in google maps and live. Rom 3.57.605 radio3.37.75 rpi 2.03_002 . Does anyone know how to solve this issue?Also how to remove vahalla gps manually from my device? I hope someone can help. Thanks in advance.
miodek1 said:
I tried the methods described in the forums to unlock the gps on my vx6800 , but i have no luck at all. Still not finding satellites in google maps and live. Rom 3.57.605 radio3.37.75 rpi 2.03_002 . Does anyone know how to solve this issue?Also how to remove vahalla gps manually from my device? I hope someone can help. Thanks in advance.
Click to expand...
Click to collapse
I'm no expert by any means but I have my Titan (xv6800 for Verizon) unlocked and GPS working fine. The difference I see from yours is your radio. I have radio 3.42.50. If I am not mistaken this is the current recommended radio for GPS capability. You also should install the GC Verizon aGPS cab to prime the GPS. The cab just uses your internet connection to find the current locations of the satellites which provides a 5-15 second lock in most cases. Ill attach the cab so you can install it. Also make sure that Google maps is manually set to use "com 4" and a baud rate of "4800". As far as the "Live" and "Valhalla" problem, I'm not sure because I haven't used either one. Also before you install that radio, make sure your rom is compatible with that radio. Again I am in no means an expert, just a student learning from these forums. Hope this helps.
PRBajista 9:
Do not install the above cab. Look here in the last ten pages for the new cab since verizon is messing with the gps settings. It is in serfboreds signature.
http://forum.xda-developers.com/showthread.php?t=424387
Also try to use htc gps tool or gps viewer to verify that the gps is seeing satellites.

AT&T Samsung Galaxy S II GPS problem (GPS doesn't work)

Hi all!
Please help me to solve the problem with GPS on my SGS2.
It doesn't work at all in any navigation app, though GPS test (app from market) shows, taht the device can see a couple of satelites.
My configuration:
2.3.4 android
Kernel: 2.6.35.7
Build: UnNamed ROM v1.2.0
PS
I live in Russia. Can it be so, that GPS works only in US?
bencozzy said:
Make sure att is set to 0 in sirfgps.conf and the agps settings in the gps.conf are probably wrong too.
Click to expand...
Click to collapse
I'm sorry for lame question, but wher can find sirfgps.conf and gps.conf?
I've searched through all the phone setting and didnt find any GPS configurations except "Use GPS Satelites" (in Location and security menu).
does it work better if you have wifi on? i found its locks better when i have both gps and wifi on
what about trying this:
http://forum.xda-developers.com/showthread.php?t=1343072
joshuadjohnson22 said:
does it work better if you have wifi on? i found its locks better when i have both gps and wifi on
Click to expand...
Click to collapse
It does work with wifi on, but it uses only wifi, gps doesn't work, so there is no sense in that.
I'll try your link. thx
Can you tell me please, how should I install gps.conf file? via CWM?
Update aGPS
I had the problem as well.
I downloaded GPS Test and started it.
Go into Menu|Settings
Click Clear aGPS then Update aGPS
My GPS works fine now.
Have you tried an app like this one that is known to have support for Russia?
Thank you all for your support guys.
This http://forum.xda-developers.com/show....php?t=1343072
seems to work for me fine! Thx joshuadjohnson22, bencozzy
Adelaide., Thank you also for the great app. I'll try it!
bencozzy said:
russian gps.conf
sirfgps.conf use root explorer and go into system then etc and scrool down until you see sirfgps.conf
Click to expand...
Click to collapse
bencozzy, I understood finally how to find the sirfgps.conf file, but i can't edit it, because the system says its readonly. Could you please help me with this.
I want to sett at&t settings to 0.
bencozzy said:
Root explorer should have under settings I believe to mount as read and write.
https://market.android.com/details?id=com.jrummy.root.browserfree all you have to do on this one is grant superuser permission go to desired file tap it select edit
Click to expand...
Click to collapse
Thx! This worked!
Now I will check if my gps performance become better.
Sent from my SAMSUNG-SGH-I777 using xda premium
Platcent said:
Thx! This worked!
Now I will check if my gps performance become better.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
If it still doesn't help, FasterFix from market should be able to be another way to do your gpsconf settings correctly.
Hunt3r.j2 said:
If it still doesn't help, FasterFix from market should be able to be another way to do your gpsconf settings correctly.
Click to expand...
Click to collapse
Really great app! Thx!
Easy way to change the gpsconf file!
I was having problems with my GPS as well where it would not lock on no matter how long I waited. I did not have this problem when I first got my phone and I'm not sure when the bug was introduced. None of the software fixes worked for me, including the ones discussed here, and the problem persisted across all ROMS, including stock.
Finally I found someone in a forum that recommended removing the battery while the phone was on. I was hesitant to do this for obvious reasons, but my frusteration drove me to desparation and I tried it. To my surprise the GPS works good as ever and typically locks onto my location in less than 10 seconds. Obviously if you can get the software fix to work for you, this is better, but this was the only thing that worked for me. Hopefully this will help someone else.
learning2livelyf said:
I had the problem as well.
I downloaded GPS Test and started it.
Go into Menu|Settings
Click Clear aGPS then Update aGPS
My GPS works fine now.
Click to expand...
Click to collapse
This fix worked great for me!! Stock odexed, rooted, lidroid toggles, adw launcher.
bencozzy said:
Make sure att is set to 0 in sirfgps.conf and the agps settings in the gps.conf are probably wrong too.
Click to expand...
Click to collapse
What should the agps settings in gps.conf be set to?
I already set ATT=0 and used Faster Fix, but still locking/fixing is very slow, sometimes taking hours.
Could this have anything to do with my location? I am in China now, have unlocked the phone so using on a local carrier. Last time I was in the US (using it with ATT) it worked great.
Solved - SGH-I777 GPS fix
The sirfgps.conf ATT_NETWORK_OPERATOR=0 did nothing for me on my AT&T SGH-I777.
I got that GPS fix app and gps worked but its full of spam adverts that show on your notification bar. They appear with a star infront of the spam advert.
I fixed it the old fashion way. By remembering how I fixed my AT&T Galaxy I gps issue.
in /etc/sirfgps.conf leave att_network_operator=1
change, SSL_ENABLED=1
save and exit
in /etc/gps.conf change the following:
SUPL_HOST=www.spirent-ics.com
SUPL_PORT=7275
save and exit.
now I get 7 second gps lock in Miami Fl.
Platcent said:
Hi all!
Please help me to solve the problem with GPS on my SGS2.
It doesn't work at all in any navigation app, though GPS test (app from market) shows, taht the device can see a couple of satelites.
My configuration:
2.3.4 android
Kernel: 2.6.35.7
Build: UnNamed ROM v1.2.0
PS
I live in Russia. Can it be so, that GPS works only in US?
Click to expand...
Click to collapse
If any GPS program does not work on Your mobile then check this. May help.
m1xit said:
I was having problems with my GPS as well where it would not lock on no matter how long I waited. I did not have this problem when I first got my phone and I'm not sure when the bug was introduced. None of the software fixes worked for me, including the ones discussed here, and the problem persisted across all ROMS, including stock.
Finally I found someone in a forum that recommended removing the battery while the phone was on. I was hesitant to do this for obvious reasons, but my frusteration drove me to desparation and I tried it. To my surprise the GPS works good as ever and typically locks onto my location in less than 10 seconds. Obviously if you can get the software fix to work for you, this is better, but this was the only thing that worked for me. Hopefully this will help someone else.
Click to expand...
Click to collapse
Sounds funny but for me it has worked fine. I has problem with GPS since I have changed ROM. After this change GPS does not work even on original ROM. Many thanks :highfive:
me ...
thanks !!!

Categories

Resources