I have got here an athena with AP 4.0 Rom. I am tryong to install the german tmobile stock rom. When i do this i get the error message "Found SPL v1.20" and "Download SPL before v3,03 is not allowed". I have found the SPL downgrader but this does not help me either. Is there anything i can do to fix this problem?
Thanks a lot!
dosada said:
I have got here an athena with AP 4.0 Rom. I am tryong to install the german tmobile stock rom. When i do this i get the error message "Found SPL v1.20" and "Download SPL before v3,03 is not allowed". I have found the SPL downgrader but this does not help me either. Is there anything i can do to fix this problem?
Thanks a lot!
Click to expand...
Click to collapse
Did you try this rom
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
from the wiki
here http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
it sounds like the file you are trying to load is an SPL 3.5 version
Hello,
yes, this is the ROM i am trying to flash onto my Athena but it ends with the error message. Not to sure how to fix this. As i said i have tried the spl downloader but this did not work either. Any ideas what else to try?
I have just had a look and the Athena shows SPL as 3.5 No idea how to check which version the Rom is. Any ideas what to do to get it to run?
lakeman said:
Did you try this rom
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
from the wiki
here http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
it sounds like the file you are trying to load is an SPL 3.5 version
Click to expand...
Click to collapse
OK , I think I had it back to front.(might be your language skills)
so!
You have AP4 SPL 3.5 !
In this case the downgrader should have worked if you followed the instructions on this page
http://forum.xda-developers.com/showthread.php?t=405604
I have done this and can vouch it worked.
Alternatively on this page http://forum.xda-developers.com/showthread.php?t=397518
there are a couple of german roms or you could try and alter Michys multilanguage rom
Related
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
My Ameo has started to freeze at the loading screen just after the rom and radio version numbers disappear from the screen. Originally i was using AP5 and decided to downgrade to SPL 1.2 to try some other roms. I followed the procedure and flashed ap3 new and then ran SPL downgrader to try some other roms which seemed to work correctly. Unfortunately when flashing any SPL 1.2 rom the box gets to 100% and reboots as normal but i get the problem mentioned above. I have tried to search the forums for anything related to this and if I have missed anything I apologise. Im now without my beloved Ameo so thanks in advance for any assistance you can provide.
Did you remove your SD card? This will cause problems some times...
Just to add the IPL and SPL numbers on the bootloader
Just to add the IPL and SPL numbers on the bootloader are :
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
photon2 said:
Did you remove your SD card? This will cause problems some times...
Click to expand...
Click to collapse
Yes i have taken the SD card out and get the same problem.
Does no one else have any ideas?
Does no one else have any ideas? times are so hard now im having to use a Samsung E900 do you feel my pain...
Now you're on SPL 1.2, have you reflashed to a 1.2 ROM? AP3New is still 3.5. Boot into bootloader and give it a try.
I have tried all the ones i have found.
Currently i have t-mobile WM6 rom from their website flashed but I have also tried IRUS Vanilla Rom, Sogarth Base Rom 1.2 and well all of them I could find for 1.2 but all freeze at the same point when resetting (albeit with different bootscreens). As you would guess im desperate, I would guess that when downgrading to SPL1.2 its gone wrong somewhere. Does anyone know of a way to update the SPL back to 3.2 from the bootloader as thats the only way i can get a connection to my phone from my pc.
Thanks for your replies so far.
Sorry i meant SPL3.5
After flashing my charmer with wm 6.1 it was stuck at the Boot Screen and my phone no longer made a hard reset as it give formatting failed error.
Then i went to download an official WM5 rom from Tmobile, then I went into bootloader and successfully flash the official ROm. But again format error
Now it just shows
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
I tried the prophet ROM flashing as advised somewhere else but it failed at 95% giving me invalid nbh error
In the past I had successfully solved the problem by flashing the prophet ROM but this time .......
Any complete help or specially cooked Prophet ROM for this type of recovery...
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
rmagyar said:
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
Click to expand...
Click to collapse
But this is for recovery puposes as described somewhere else
Nobody seems to be interested to take pains in solving my problems
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
ChrBeck said:
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
Click to expand...
Click to collapse
Thanks Mr ChrBeck!!!
But I think that some way of downgrading the the SPL to 2.?? from the current 3.08 would allow me to install the PROPHET ROM for recovery and then it would be possible for me to upgrade to orignal WM5 ROM and then upgrade to your lovely ROM that I had before your latest upgrade.
Am I right or if not then can you give me the necessary files and instructions for the sd card recovery method.
Please help me as no one in my locality knows much about CHARMER and simply unable to help me in this aspect.
Thanks again.
Dr.Zia ur Rehman
I'll try to help you. In the Wizard forum there is a sticky whitch tells how to do the SDrecovery. Just search it. With the SD Card you can just fully flash a ROM. You can't downgrade anything because downgrades are looked.
If I'll find the sticky this evening I can post the link here.
Cant there be some kind of HARD SPL for this ..... charmer that would allow me to flash the prophet ROM fully. In this way I had recovered my CHARMER but I think that at that time it had lower version of IPL or SPL so the full PROPHET ROM was sucessfully installed and I was able to hard reset and flash the orignal T-Mobile ROM that I think upgraded my SPL too!!!
There is no hardSPL. Noone ever designed one. And if the Prophet trick doesn't work you can try it with a G3 Wizard ROM too. But if that doesn't help to search for the SDUpdate!
To do an SD update you must have a ROM dump on SD card from bootloader.
Method can be found here. Section 8. OS, GSM Image Reflash Procedure
Thanks for finding it for us. There was a time I read this manual completely but I don't know much of it anylonger.
Charmer needs to be CID unlocked to perform SD card flashing.
I agree. I just forgot to mention this.
Then forget it. You can't CID unlock a 2.x or 3.x. So this method is out.
How can I confirm that my charmer is CDI unlocked???
Any if this is the case then what to do with my poor CHARMER....
ANY HOPES OF ITS RECOVERY in some other manner???
Also can you post link to the wizard ROM you mentioned in your post for recovery ???
THANKS IN ANTICIPATION !!!
Well, you have a boatloader over 1.x right? If so your device can't be unlocked. But you can try to flash any WM5 ROM for Wizard. But be sure it is jast the ROM. No phone or bootloader in it.
Maybe that works.
Would you be kind enough to post a link to the proposed ROM to which I can give a try?
Is this would be possible to flash any specialiy cooked Prophet ROM only with OS as the complete Prophet ROM (with no ID RUU)gives me error at 95%.
Further isn't there a way to downgrade my spl that would allow me to flash prophet ROM that confirmly worked for me in the past.
Please help i am in great trouble.......
Hello mates!
First of all this is a great forum, maybe the best in the world Whatever.. I think I have a big problem. Tonight I flashed SPL 3.65 for X7510 to my X7500. And now I got invalid model id whenever i try to turn back to my original x7500 rom, spl...
I tried the mtty thing and nothing happened. What must i do right now?
And something! If every program checks the model ID when upgrading the flash, how did SPL 3.65 upgrade didn't checked it!
Waiting for the masters' help...
I solved it by Flashing X7510 ROM which is ok to my SPL version. And then i re-flashed SPL Downgrader then it became ATHE400 to ATHE100 SPL 1.20 now I'm back to X7500 world
hmm, i would like to know, why peoples try to flash an x7510 rom to the x7500
I was drunk I didn't really want to flash x7510 to x7500
ggursel said:
Hello mates!
First of all this is a great forum, maybe the best in the world Whatever.. I think I have a big problem. Tonight I flashed SPL 3.65 for X7510 to my X7500. And now I got invalid model id whenever i try to turn back to my original x7500 rom, spl...
I tried the mtty thing and nothing happened. What must i do right now?
And something! If every program checks the model ID when upgrading the flash, how did SPL 3.65 upgrade didn't checked it!
Waiting for the masters' help...
Click to expand...
Click to collapse
this was because SPL 3.65 is only intended for x7510, and so I edited it to only accept ATHE400 roms. anyway I see you fixed the issue and don't drink that much in future
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore