IF U HAVE FLASH LITE 2.1 DOWNLOD THIS CAB
http://forum.xda-developers.com/attachment.php?attachmentid=67948&d=1201644535
THEN INSTALL IT ON THE MAIN MEMORY , AFTER U INSTALLED THE CAB GO AND UNISTALL IT AFTER THAT FOLLOW THE NEXT STEPS.
FIRST OF ALL UNCHECK PROXY ENABLE FEATURE THAT IS ON SETTINGS, CONNECTIONS, , ADVANCE SETUP, SELECT THE NETWORK, MEDIA NET(IN THIS CASE ATT), EDIT, PROXY SETTINGS, AND DISABLE "THIS NETWORK CONNECTS TO THE INTERNET"
AFTER THAT, UPDATE YOUR REGISTER WITH THIS FILE
http://www.4shared.com/file/64178303/445d6758/20080808.html
THEN, install the opera it is better if you install the opera in the main memory here are the links
Install into main memory:
http://rapidshare.com/files/144273883/OBX-Opera_9.5.Build1957.WWE.cab.zip.html
Hardcoded intro Storage card:
http://rapidshare.com/files/144274089/OBX-Opera_9.5.Build1957.UC.SD.WWE.cab.zip.html
thanks to obalix who extracted this build from Omnia rom after the install is finish restart the device.
FINALLY, install flash 3.1
http://forum.xda-developers.com/attachment.php?attachmentid=111236&d=1220652288
thanks veyka for that and guys finally restart ur device and thats it. let know if somebody have problems with it thank u and enjoy it.
after that if it doesnt work do this, if it works leave it like that dont try to do this.
install Opera Build 2128 Upgrade: (Not Resloution Specific)
http://www.4shared.com/file/64047501/7a41c3e5/Opera_v95_Build_2128_Upgrade.html
If you get the keyboard popup bug with flash installed use the null keyboard cab found here
http://forum.xda-developers.com/attachment.php?attachmentid=111357&d=1220704344
if u didnt want to upgrade it, install build VGA 2128 - Full Install to Device Memory
http://www.4shared.com/file/64047605/7f6ab9a5/Opera_v95_Build_2128_VGA_WWE.html
Hi,
Tried, but does not work - at least for me ;( I am using irus 0MB pagepool ROM.
There was mentioned somewere in Athena forum that that this will only work with WM6.1 SW version higher then 20000??
Any suggestions?
Uros
link are dead!!
Working links and solutions to some problems can be found on the original thread:
http://forum.xda-developers.com/showthread.php?t=425268
yeap links are dea please post them here for downloading....
vkoulbal - see my message I posted just before yours. I'm downloading it right now.
So far so good. Keyboard issue when typing in an address has (finally) been fixed. The screen orientation problem has (finally) been fixed. Seems fairly fast. Scrolling is "progressive" now, which will take some getting used to (the spot under your stylus moves slightly faster up and down than your stylus is actually moving).
this build has several problems
1. Fonts overlap each other if large fonts are chosen.
2. it is impossible to enter text or select a link at zoom out mode.
The best version for me is 1184.
Also for me it was very resource hungry , though I did like the variable zoom
I haven't been able to get Flash to work, although the other thread says that Windows 6.1 builds below 20000 may have issues and mine (AP4) is in the 19000's. I guess I wait a little longer. Then we need a browser that supports Java...
eaglesteve, 1184 has been my choice for several months now. I've tried 10 builds, and 1957 is the first to fix the rotation and keyboard issues. It has its own new quirks but I think it will become my new 1st choice. Still can't log on to the web interface for Exchange like I could with 8.65, but IE is good enough for that, for now.
I can confirm that opera 1957 works with my rom build 19588 i have only tested it on youtube.com but it works pretty good
hi, uncheck proxy feature.
cerk2006 said:
Hi,
Tried, but does not work - at least for me ;( I am using irus 0MB pagepool ROM.
There was mentioned somewere in Athena forum that that this will only work with WM6.1 SW version higher then 20000??
Any suggestions?
Uros
Click to expand...
Click to collapse
hi, just uncheck proxy
techntrek said:
I haven't been able to get Flash to work, although the other thread says that Windows 6.1 builds below 20000 may have issues and mine (AP4) is in the 19000's. I guess I wait a little longer. Then we need a browser that supports Java...
eaglesteve, 1184 has been my choice for several months now. I've tried 10 builds, and 1957 is the first to fix the rotation and keyboard issues. It has its own new quirks but I think it will become my new 1st choice. Still can't log on to the web interface for Exchange like I could with 8.65, but IE is good enough for that, for now.
Click to expand...
Click to collapse
Hi,
dreynam2 said:
hi, just uncheck proxy
Click to expand...
Click to collapse
Could you please pinpoint where may the proxy feature be unchecked? Under connections or Opera or... ? I simply can not find it ;( I am using irus 0mb poolpage ROM.
irus said:
I can confirm that opera 1957 works with my rom build 19588 i have only tested it on youtube.com but it works pretty good
Click to expand...
Click to collapse
Can you explain what you did to get it working?
thx
Uros
dreynam2 said:
hi, just uncheck proxy
Click to expand...
Click to collapse
Wish it were so easy, but I always operate with the proxy unchecked. Did that a long time ago because under AP4 the weather app on the today screen won't work unless the proxy is unchecked.
cerk2006 - its under Settings > Connections > Connections
Note that for me, using AT&T in the US, I first had to go somewhere else (don't remember where) and switched from using the "Internet" connection to the "Media Net" connection. There was no proxy switch available when I was using the "Internet" connection.
cerk2006 said:
Hi,
Could you please pinpoint where may the proxy feature be unchecked? Under connections or Opera or... ? I simply can not find it ;( I am using irus 0mb poolpage ROM.
Can you explain what you did to get it working?
thx
Uros
Click to expand...
Click to collapse
well i removed flash 2.1 and reflashed my rom and it worked
techntrek said:
Note that for me, using AT&T in the US, I first had to go somewhere else (don't remember where) and switched from using the "Internet" connection to the "Media Net" connection. There was no proxy switch available when I was using the "Internet" connection.
Click to expand...
Click to collapse
yes, same here. Then I added the same connection again and proxy settings become visible. But, still no youtube... ;(
Uros
cerk2006 said:
yes, same here. Then I added the same connection again and proxy settings become visible. But, still no youtube... ;(
Uros
Click to expand...
Click to collapse
that might be 1 of the problems (not sure) but the real problem is that you have flash 2.1 cooked into the rom it need to be removed from the rom and reflash. i don't have time to do that but you can ask michy to do it for my rom and repost, i don't have a problem with that. I did not make my rom undumbable or anything stupid like that or you can get my kitchen and do it yourself.
irus said:
that might be 1 of the problems (not sure) but the real problem is that you have flash 2.1 cooked into the rom it need to be removed from the rom and reflash. i don't have time to do that but you can ask michy to do it for my rom and repost, i don't have a problem with that. I did not make my rom undumbable or anything stupid like that or you can get my kitchen and do it yourself.
Click to expand...
Click to collapse
Is it possible to remove it manually (clean files and registry)? I really would like to avoid reflashing the ROM since I have setup my Athena just right and I do not want to go through setup again if not absolutely necessary. Youtube is not a must, just would be nice to browse clips occasionally ...
uros
cerk2006 said:
Is it possible to remove it manually (clean files and registry)? I really would like to avoid reflashing the ROM since I have setup my Athena just right and I do not want to go through setup again if not absolutely necessary. Youtube is not a must, just would be nice to browse clips occasionally ...
uros
Click to expand...
Click to collapse
well from everthing i read you need to uninstall flash 2.1 before loading flash3 and since flash 2.1 is cooked into the rom there really is no other way. one thing i can suggest is using the sdconfig.txt file to load all of your apps, if you search, i have posted a how to on using sdconfig to load email settings and connection settings so on hard rest you don't have to do a thing but use your device. it might take a little reading and some time but in the end its worth it. hope this helps
Related
Hi,
Tried my first ROM with the kitchen on here. Used the latest essentials rom rather that the touch rom but added all the touch components within the OEM folder.
IT WORKED!!! Storage card ok, bluetooth ok. Touch flow ok. Just one problem........
Phone would not work. Doh!
Could not register on the network.
Any ideas why?
cheers.
pjam said:
Hi,
Tried my first ROM with the kitchen on here. Used the latest essentials rom rather that the touch rom but added all the touch components within the OEM folder.
IT WORKED!!! Storage card ok, bluetooth ok. Touch flow ok. Just one problem........
Phone would not work. Doh!
Could not register on the network.
Any ideas why?
cheers.
Click to expand...
Click to collapse
Tried the same thing, got the same results...
Any help would be appreciated indeed.
some needed drivers are missing somewhere, anyway did you turn off the phone when running the upgrade ie do it in flight mode??
rgs
I always update in flight mode. don't like the idea of receiving a message whilst doing it.
You would think that with the phone working in the rom kitchen original rom and the essentials donor rom that there would have been more than enough working drivers.
: )
try comm manager -> settings -> phone if it asks for your pin..
was missing in some roms i tried...
pjam said:
Hi,
Tried my first ROM with the kitchen on here. Used the latest essentials rom rather that the touch rom but added all the touch components within the OEM folder.
IT WORKED!!! Storage card ok, bluetooth ok. Touch flow ok. Just one problem........
Phone would not work. Doh!
Could not register on the network.
Any ideas why?
cheers.
Click to expand...
Click to collapse
there shouldn't be any reason for changing anything with because I used essentials rom and added the touch stuff and some more oems
arent you using 10 buttons comm manager? that is one of the problems, if you make oem package from commonly distributed cab, you should mod its registry to work correctly. it contains many obsolete entries and also some preventing GSM activation.
I was solving this just today
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
be more specific. How it cant run? Install properly? wat else SIP and Today Plugin did u install?
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
possum4 said:
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
Click to expand...
Click to collapse
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
I have English Rom version O2 Xda Atom Pure! Calligrapher worked before on 0.3.0 and original roms. Just this rom won't work on!
try to install G4 SIP Tweak.cab make pcm keyboad as default SIP, it works for me....
download from here... http://forum.xda-developers.com/showpost.php?p=1424544&postcount=1
ogami_ito said:
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
Click to expand...
Click to collapse
Hi and thanks for your help and suggestions. I tried the software you suggested but it didn't work (with calligrapher). Thanks again anyway
possum4 said:
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
Click to expand...
Click to collapse
May I know what the version of this Calligrapher is? and where is the official site?
www.phatware.com I'm using current version 8.5
thanks!
possum4 said:
www.phatware.com I'm using current version 8.5
thanks!
Click to expand...
Click to collapse
if this program works..can u share to me this program and PM to me the Se**al..thanks
Jiggs I know you are busy however I'd just see if there could be any work arounds so I can run Calligrapher. I have tried the suggested "sip change" programs mentioned and also tried sk tools etc. Only if you have time of course! I'd be very grateful. Thanks again for your wonderful work
I have just tested the latest version of caligrapher on my new build. It works perfectly
Caligrapher is cool, but the application is large
I agree with Jiggs. Nice software though.
Could I help test the new build? Or is that too much to ask?
Calligrapher v8.5 works fine for me w/6M pagepool.
Calligrapher uses a LOT of memory. It seems to fail to run when you have too many today plugins (or a few using lots of memory). Here are the things to try:
1. Go to options and set Calligrapher to be the default SIP on reset.
2. Reset the device.
If it still doesn't work:
3. Disable ALL of your today plugins.
4. Reset the device.
If it works now, decide which today plugins you can't live without and turn them on one by one until Calligrapher stops working.
If it did not work, try SIPChange - http://forum.xda-developers.com/showthread.php?t=271008.
Good luck!
have somebody the same issue with the irus WM6.1 "build in" Encryption?
it does´t work. everytime i tick the checkbox the tickmark disappears when i hit the ok button . :-(
somebody an idea?
mine works fine..
need help
Could somebody help me - please?
Maybe there is a cab file to reinstall the encryption or maybe someone can give me his working files so that i can replace my bricked files.
thanks
Mateusxxx said:
Could somebody help me - please?
Maybe there is a cab file to reinstall the encryption or maybe someone can give me his working files so that i can replace my bricked files.
thanks
Click to expand...
Click to collapse
did you try hard reset, because mine works just fine . i dunno about others in here
What rom are you running and did you perform a Hard Reset after installing the current rom?
The HR after an upgrade may seem trivial but it can eliminate many issues and is considered a "Best Pratice".
Cheers
BR
I am using the irus full WM6.1 Rom.
I have tried several times a hardreset and also the irus 6.1 Vanilla - but it didn´t work. I have tried the original T-MO WM6 and it works fine but the rest of this Rom is ****. I want to use the irus rom with a working built in encryption. i don´t want to use other encryption software but i want my data to be encryptet :-(
Well i can't comment on the current Irus roms because I have not tried them, I also like to have encryption. I have been using the encryption option that is built in to Resco Explorer (One of my Must Have Apps) Not sure if this helps but it is a thought.
Cheers
BR
thanks - the resco explorer encryption is ok but i would prefer an on-the-fly encryption - the WinMobile built in encryption is also good because you don´t need a password and it is fast.
could somebody give me his working files wich i need for the encryption - maybe my are brocken - so i could try to replace.
I have Verizon Wireless service. I want to upgrade my phone for the first time. I've been reading alot and the Wiki but it doesn't go into great detal about how to do it. I want to make sure I have got everything down correctly first.
- First, get my phones ESN, MSID, Security, EPST, and M. IP settings by using ##778, etc.
- Second, I unlock the phone and install BootLoader 2.40 per Wiki instructions.
- Third, I install Titan_Radio_ROM_3.42.30 by coping TITAIMG.nbh to my SD mini card and running bootloader by pressing the 3 keys.
- Fourth, I install dcd_titan_kitchen_3.2.2 by running it and compiling it and coping the created RUU_signed.nbh after renaming it to TITAIMG.nbh and copying it to the SD card and running bootloader by using the 3 keys.
I pretty much checked everything before I compiled it, except items that did the same thing or that was double like the different versions of the camera. Is that OK, or will it eat up all my memory, or will I have other problems? I didn't know what alot of the stuff was, so I thought it would just be best to install everything. Also, the wiki talks about choosing the right carrier and not more then one carrier, but that option wasn't there. I assume that's what the VZ cab is now here for?
- Fifth, copy dcd Verizon Carrier 20080706.cab to the SD card and run that.
Then I do a soft reset and everything should be working? Is that right? Did I miss anything?
I also don't understand the A-key problem and how to avoid it.
I'm also confused about not booting after you upgrade the ROM and after the screen calibration the carrier customisations will run and alter my EPST settings to the operators settings and my phone will be configured to the wrong service. What's that about?
Will it allow me to run the verizon cab file from the SD card after I install the ROM without having to soft boot the phone?
Also, can I use PIM backup and restore to backup to my SD card and then restore after the ROM upgrade? Will that be a problem?
Thanks for your help and time.
Long post, so here is mine:
Your four steps are pretty close, other than mentioning the formatting of the sd card which you probably already know how to do via cmd, you have it right.
If you are not checking extra boxes in the kitchen, you can just use the ROM he posts underneath. If you want standard games, x-button, different versions of the phone or camera, etc or if you want to install your own OEMs then the kitchen is for you. Sounds like you are just planning on hitting everything, which I would suggest against (you don't want or need two phone versions, two cameras, etc). Leave the items where they are unless you know why you are changing them, dont click everything. Do some research on each item by googling xda here.
With regard to carrier cabs, run your carrier cab afterward to get functionality. Yes you can run from SD. I have never needed to do an A-Key reset, but others had to after upgrading radio. Just call verizon and tell them you are not able to authenticate your phone and they will reset your phone for you. Don't worry about what it is or why it happens.
Letting customizations run is for when you run the sprint update, which it doesn't sound like you are doing. If you are running the updates over sd card, you can let the customizations run, but since you dont have UC (research here) there is nothing to run so no worries; it will try to run your UC and see there is nothing there and just reboot, kewl. Don't use backups (Sprite or SPB or otherwise, best to use activesync and UC (see above).
Yes, the simple stuff I left out like formatting the card, etc. I understand that.
I guess I need to use the Kitchen because their are some items in there that I want, and some items that I don't know what they are, and I'll look into it like you said instead of just checking everything just incase it's something I might want or need in the future. Like I said I didn't click on everything, stuff that do the same thing, or different versions of the same thing I didn't click on. So, I think I just clicked on everything but Enterprise + IPSECVPN, Camera 4.05.30525.00, HTC CommManager - Titan 8 Button, and HTC Titan PhoneCanvas (Dailer).
It sounds like I won't need Enterprise + IPSECVPN, because it sounds like it's for some kind of Enterprise network with VPN, and I don't have something like that. I would like to know the difference between the version 4 & 5 of the Camera. I assume version 5 is better. I assume that the Touch 10 is better then the Titan 8 button, but would like to know the differences, also the differences in the Dialers. I assumed the Vogue was preffered since it was the default one that was checked. I haven't checked out the link you left for me yet, so I'll do that to see if I can see the differences.
Do I do a soft reset after I install the Radio and before I install the ROM and after I install the ROM and before I install the Carrier Cab file?
I'm having problems doing backups now. I don't have activesync because I have Vista and it doesn't use activesync. I was able to do backups with Outook and Windows, but they won't work anymore. I was using the USB data cable and they were working fine, but then I got a Bluetooth Dongle and installed that and it messed everything up. I tried one that was compatible with XP and downloaded different drivers and I couldn't get it to work. So, I purchased one that was compatible with Vista and it would sync but not backup my contacts and appointments with Outlook like it would with the data cable. I tried using the USB cable and it won't work anymore either. I can't even get it to make a connection anymore, and it will show an error on the phone. That's why I got the PIM backup and restore software to backup to and from the SD card. I haven't used it yet. I was going to try and use it, and then do a Hard Reset and then restore my data to my phone and try to get it to backup to my Outlook like it used to with the USB Cable. If I can get that to work I was going to try and do the Titan ROM update. Any feedback would be greatly appreciated!! Thanks for all the help!! Take care!
serfboreds said:
Long post, so here is mine:
Your four steps are pretty close, other than mentioning the formatting of the sd card which you probably already know how to do via cmd, you have it right.
If you are not checking extra boxes in the kitchen, you can just use the ROM he posts underneath. If you want standard games, x-button, different versions of the phone or camera, etc or if you want to install your own OEMs then the kitchen is for you. Sounds like you are just planning on hitting everything, which I would suggest against (you don't want or need two phone versions, two cameras, etc). Leave the items where they are unless you know why you are changing them, dont click everything. Do some research on each item by googling xda here.
With regard to carrier cabs, run your carrier cab afterward to get functionality. Yes you can run from SD. I have never needed to do an A-Key reset, but others had to after upgrading radio. Just call verizon and tell them you are not able to authenticate your phone and they will reset your phone for you. Don't worry about what it is or why it happens.
Letting customizations run is for when you run the sprint update, which it doesn't sound like you are doing. If you are running the updates over sd card, you can let the customizations run, but since you dont have UC (research here) there is nothing to run so no worries; it will try to run your UC and see there is nothing there and just reboot, kewl. Don't use backups (Sprite or SPB or otherwise, best to use activesync and UC (see above).
Click to expand...
Click to collapse
Is there a size limit to the ROM file RUU_signed.nbh? There should be. Let me know. Thanks.. Steve
Since this is your first ROM upgrade I think you should avoid the kitchen for now and just use DCD's compiled rom. (this is just my opinion) It will really simplify things for you.
As for PIM backup I would think it would work fine for contacts, but I think you will run into issues if you wan to restore SMS backups because of going from WM6 to 6.1 and the threading SMS that is used for 6.1.
I also saw this http://www.dashwire.com/ I haven't used it yet, but its free online solution for backing up your PPC.
As far as your question for soft-resets go, When you run the update the phone should reset on its own. I don't know why your active sync isn't working, but I would try and get it to work before running these updates to ensure proper connectivity of your device before running these updates.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Thats what you would need to get it to connect.
Gluck!
cleanser said:
Since this is your first ROM upgrade I think you should avoid the kitchen for now and just use DCD's compiled rom. (this is just my opinion) It will really simplify things for you.
As for PIM backup I would think it would work fine for contacts, but I think you will run into issues if you wan to restore SMS backups because of going from WM6 to 6.1 and the threading SMS that is used for 6.1.
I also saw this http://www.dashwire.com/ I haven't used it yet, but its free online solution for backing up your PPC.
As far as your question for soft-resets go, When you run the update the phone should reset on its own. I don't know why your active sync isn't working, but I would try and get it to work before running these updates to ensure proper connectivity of your device before running these updates.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Thats what you would need to get it to connect.
Gluck!
Click to expand...
Click to collapse
I've used PIM Backup since Jan of this year, and have had no issues restoring any SMS from a WM6 to WM6.1. It goes through and threads it all the 1st time you open up messaging, so if you have a large amount of messages, it will take a while to thread it all the 1st time you open it up....
For my first time I did not use the kitchen. I found it pretty easy to do. Just make sure you load the radio b4 the rom.
I just wanted to thank everybody for all there feedback and help, it was very helpful. The 3 main reasons I need to do the ROM update is to take advantage of the new features of WM6.1 and I need to be able to install Java and get my TomTom GPS software working. That's the 3 main reasons right now.
My phone is so messed up right now it's always locking up and having alot of problems from maybe all the apps I installed and tested and stuff. I need to reset it like 3 or 4 times a day. I think that's why I can't sync it with my computer anymore. I'm going to just back it up to the SD card and do a hard reset and get it working again and syncing with my computer and then do the ROM upgrade, etc. I will take your advice and do the stock ROM at first to figure out how to do the upgrade. I will then have to use the Kitchen to enable the GPS and the Java, right? When I do the Kitchen ROM later will I just need to upgrade the ROM, and not worry about any of the other procedures?
Also, when I do use the kitchen to create the ROM what is the size limitation on the ROM file?
Do you also have an option on which Dailer and Camera software?
Thanks again and wish me luck! LOL
Well, I downloaded the DCD compiled rom and it's filename is dcd_titan_3.2.2.exe and I ran it and it doesn't look like you can install it via the SD card. It looks like you have to do it via a PC Sync. Can you do a PC Sync after installing the Radio? Well, let me know. I think I'm ready to get started now. Thanks..
OK, well I got my phone to sync with my PC, but it sometimes has connection and disconnection problems, but I was able to get it to sync everything with my PC once.
I ran EPST and got my ESN and MSID, but I'm not sure what security information I should copy and I can't find the MSN number. There is alot of M.IP information. Do I copy everything in the M.IP Settings and M.IP Default Profile? Is there anything else I'm missing? Thanks.
May I suggest you take a digital Picture and scroll down and take a second one. This eliminates any questions on Handwriting and then blow them up on your PC if you have bad vision.
I found this software and it's even better, it not only allows you to do screenshots, but you can totally control your phone and enter data, etc. from your PC, and it's free!!
MY MOBILER v1.23 (06/15/2008) - FREEWARE
View your mobile screen on your desktop.
Control your mobile by using desktop keyboard and mouse.
Copy/Cut/Paste text between mobile and desktop.
Capture mobile screen.
Drag and drop files to your mobile.
Support ActiveSync / IP Connection
Support Mobile Explorer (File Browse)
http://www.mtux.com/
I found this screen capture software and used it and works great. It only took a few minutes to capture all 13 screens, etc.
SPB ScreenShot Capture Tool
http://www.smartdevicefreeware.com/spb-screenshot-capture-tool/
Can someone else confirm this....I have noticed (after rooting)....open your browser then go to www.goal.com/en. You will notice you cant click on any link? every time you have to open into a new tab to see? I am not sure if it is anything to do with flash? But I am pretty sure, when I got my phone first time (at that time there is NO ROOT yet), and I can browse Goal.com without an issue. Or maybe someone know the work around this issue??
I just tried Goal.com on my rooted stock rom and it works fine. try clearing your browser cache and cookies. if that does not work, go to applications in settings and clear all browser data.
AndroHero said:
I just tried Goal.com on my rooted stock rom and it works fine. try clearing your browser cache and cookies. if that does not work, go to applications in settings and clear all browser data.
Click to expand...
Click to collapse
Andro, please make sure it is www.goal.com/en (not just www.goal.com, where it auto detect your location...for example if you are in Australia...it will automatically go the australian, and then switch to specialized mobile format, not the full size if you are on a PC). IF you go the full site (not mobile format) and the international site (that's why make sure /en) you will notice...any news or link, you cant just open by touching on it...you need to open into a new tab. The site open just fine...but when browsing the news, you have to open a new tab.
You know some of you may think....ah it could be just the site issue?? but one thing that I dont understand, when I was with stock ROM unrooted, I am pretty sure it work ok Anyway, I will try to find a work around (tried clearing cache etc...still the same).
kuailan said:
Andro, please make sure it is www.goal.com/en (not just www.goal.com, where it auto detect your location...for example if you are in Australia...it will automatically go the australian, and then switch to specialized mobile format, not the full size if you are on a PC). IF you go the full site (not mobile format) and the international site (that's why make sure /en) you will notice...any news or link, you cant just open by touching on it...you need to open into a new tab. The site open just fine...but when browsing the news, you have to open a new tab.
You know some of you may think....ah it could be just the site issue?? but one thing that I dont understand, when I was with stock ROM unrooted, I am pretty sure it work ok Anyway, I will try to find a work around (tried clearing cache etc...still the same).
Click to expand...
Click to collapse
I get the English version. so mine was goal.com/en-gb. I tried again. The top story was about benetez getting the Chelsea job. I clicked it and it loaded no probs
AndroHero said:
I get the English version. so mine was goal.com/en-gb. I tried again. The top story was about benetez getting the Chelsea job. I clicked it and it loaded no probs
Click to expand...
Click to collapse
I am pretty sure you must be in mobile format right?? you know some web site when they detect your mobile, will go to a mobile format (you know what I mean). If you go to the mobile format, it work just fine (so am I). What you need is to browse it like if you are to browse from the PC (not mobile version)....you will see the issue.
NOTE: OK I think I fixed it....just want to make sure what cause the problem.. I will update once I find out what causing the problem.
kuailan said:
I am pretty sure you must be in mobile format right?? you know some web site when they detect your mobile, will go to a mobile format (you know what I mean). If you go to the mobile format, it work just fine (so am I). What you need is to browse it like if you are to browse from the PC (not mobile version)....you will see the issue.
Click to expand...
Click to collapse
I took some screenshots to prove im on the desktop one. even flash is working for me.
AndroHero said:
I took some screenshots to prove im on the desktop one. even flash is working for me.
Click to expand...
Click to collapse
I have fixed the issue.....(I have updated my respond to you)...Just need to make sure what cause of the problem. I think it must be restoring the data from the Titanium backup. But really strange even clearing the data from the APP setting still doesnt work. Anyway, I have flashed Football latest ROM, and tested the browser it's all good.
UPDATE: NAH.......it's messed up again....I dont know WHY?? I didnt restore from anything yet (not even Titanium) or auto restore from google, and when I browse the site, it wont open on first touch the link. DAMN...I give up. I really dont know what causing it.