MMS HELP!!! Cingular/AT&T Erofich 6.1 - HTC Startrek

I have read and read and browsed and downloaded and typed and entered and so on!!!!! But none of the solutions or cabs seems to work for Erofich's Standard 6.1 1.1.7 version. I am on the Cingular/AT&T network. Does anyone have the fix? I can send MMS but cannot download.

Have the same problem but can download picture not audio files

jbogstartrek said:
I have read and read and browsed and downloaded and typed and entered and so on!!!!! But none of the solutions or cabs seems to work for Erofich's Standard 6.1 1.1.7 version. I am on the Cingular/AT&T network. Does anyone have the fix? I can send MMS but cannot download.
Click to expand...
Click to collapse
i have the settings if you want them. the cab files wouldnt work for me either. just pm me or just ask in the forum.

settings
they are also on the att website.

Yes, the settings on the ATT website WORK, but not completely. The MMS header will download, but you can't view any pictures. This must be a ROM issue - I've tried everything I can think of!

Finally resolved
This is one of those occasions where you are not sure what fixed it in the array of changes, but it worked, so don't argue with results.
I went in and cleared out all the settings that came by default with the 6.1 ROM. (Proxy, GPRS, MMS, etc.)
I then input by hand the settings on the AT&T website at:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=84238
Thank you Firewulf for the kind offer. I am curious to see what your settings are though.
I get alerts, I am able to send and receive all MMS messages as well as txt msg and Exchange Outlook email. No ERROR SYNCHRONIZING anymore!

Strange... my internet works (as well as all my internet enabled apps), texting works fine, but MMS is still a no-go! I don't get "error synchronizing" anymore... it just tries to send and always fails 5 minutes later! I have checked and re-checked the settings - I am running the latest WM 6.1 Standard ROM from this forum.

Related

MMS recieve problem with WM6 Roms

hello guys.I have a minor problem with all the WM6 Roms.I use the settings i used with WM5,but i can't recieve any mms... I have no problem sending... It seems that my phone can't recieve the mms "alert" from the network carrier,and download the message.I tried to sync manually(using send/recieve) but i get a sync error.... I am currently using PDAViet 4.0.0.0.3a.... Any ideas or solutions,will be very-very helpfull....
Send/receive has nothing to do with MMS/SMS, unless you've got some strange settings set that queues the MMSs until you press that Send/recieve. Even with my fully working MMS under WM6 I get a Sync error if I press it.
Just manually configure everything (again) and it should work. Didn't work for me, however, until I found a few provider MMS .cab files. I ran two of them and I could suddenly recieve MMSs. I am using trueneytrals WM60 and T-Mobile.
Send/receive has nothing to do with MMS/SMS, unless you've got some strange settings set that queues the MMSs until you press that Send/recieve. Even with my fully working MMS under WM6 I get a Sync error if I press it.
Just manually configure everything (again) and it should work. Didn't work for me, however, until I found a few provider MMS .cab files. I ran two of them and I could suddenly recieve MMSs. I am using trueneytrals WM60 and T-Mobile. My advice: Search for a .cab.
jellyme said:
Send/receive has nothing to do with MMS/SMS, unless you've got some strange settings set that queues the MMSs until you press that Send/recieve. Even with my fully working MMS under WM6 I get a Sync error if I press it.
Just manually configure everything (again) and it should work. Didn't work for me, however, until I found a few provider MMS .cab files. I ran two of them and I could suddenly recieve MMSs. I am using trueneytrals WM60 and T-Mobile. My advice: Search for a .cab.
Click to expand...
Click to collapse
After numerous attempts to get MMS working under the xda and tnt wm6 roms, I had to revert to an official wm5 rom to get it working.
As upto now I haven't a clue of the cause of this.
The only one I could come up with is the fact that the wm6 roms contain mms composer 3.5 instead of 3.0 (arcsoft)
When I upgrade to Pdaviet 4.0.0.0.3a, after I manually configured the MMS settings, I also thought that there was a problem with that rom. I could receive but not send, always hang in 97%.
A few days ago I updated to the new rom, 4.0.0.0.5, and it was even worst. But after I reviewed the settings, now I have no problem in receiving or sending MMSs. My fault on this one.
onesolo said:
When I upgrade to Pdaviet 4.0.0.0.3a, after I manually configured the MMS settings, I also thought that there was a problem with that rom. I could receive but not send, always hang in 97%.
A few days ago I updated to the new rom, 4.0.0.0.5, and it was even worst. But after I reviewed the settings, now I have no problem in receiving or sending MMSs. My fault on this one.
Click to expand...
Click to collapse
How did you solve your problem?
I'm on 4.0.0.0.5 and I can't send or receive MMS on TMN and I'm pretty sure everything is well configured.
TIA
Edit:
I sorted it out, just created manualy the connection with the right settings...

Help with Mighty Rom & MMS on Verizon

Help on MMS VZW; After I installed: Arcsoft Verizon MMS 5.0.69.44, a message comes up: "THis might not display because this is for an older version". I have tried to send a low res picture, and it bounces back saying "message delivery failed;or message recept failed" The person I sent it to, doesnt get the picture. I then tried GC Acrsoft MMS 5.031.25 & GC VZW Arcsoft MMS 5.0.70.24. Still no good, ”same messige delivery reject” any other ideas?
so not what you want to hear, but I spent the morning fighting with this exact issue... Finally just reflashed the ROM used PHM Registry hacker dn went to HKLM/software/arcsoft/arfcsoft mms ua/config/mm1/wspheader and added a new string X-VzW-MDN with the value of my 10 digit number. now it works.
I gave up and flashed scotts, mms worked, its also loaded. Thanks for your response
so... It seems I have gotten pretty good with this MMS not working thing... I have found that installing Caulkins Arcsoft fersion (I think its 69.43 or something....) and then dialling *228 option 1 to program your phone works pretty good. Im back to rocking Boreds stripper rom and loving it again. But now I found a winMo 6.5 rom that I wanna try....
hi all, to im new to this forum, in doing some of my own research i came across the questions on the MMS for VZW, have u tried changing anything in the servers, I was gettint the same exact message until I changed the server info, then it started working instantly give that one a try. However I am having a heck of a time trying to update the rom on my VZW tp, anyone have the time to walk me through it, thanks in advance.
Sabrina
MMS, MightyRom & Verizon
Ok, I have the MMS working on the phone. However the touchFlo interface does not support the new SMS/MMS. it no longer shows next messages on the interface. I have to go into the messages to see view any messages since the upgrade. is there a way to configure the touchflo to look at the mms update instead?

Picture messaging does not work after 6.5

Have Alltel and flashed NFSFAN's WM6.5 21501 V1 TP ROM onto my Touch Pro. I then had no option to insert a picture into a SMS or to create a MMS.
Installed QVGA_Arcsoft_MMS_5.0.27.25 and now I have the option, but MMS messages fail to send or receive
Any thoughts?
Have you tried another rom download?
Its funny that you should post this because im having the exact same problem...what are the odds lol
swimerskidude15 said:
Have Alltel and flashed NFSFAN's WM6.5 21501 V1 TP ROM onto my Touch Pro. I then had no option to insert a picture into a SMS or to create a MMS.
Installed QVGA_Arcsoft_MMS_5.0.27.25 and now I have the option, but MMS messages fail to send or receive
Any thoughts?
Click to expand...
Click to collapse
I do not have the option within a conversation anymore either. However.....if you start at your inbox and select new and mms. It should work. That's been my work around.
Make sure you configure settings!!!
I had the same problem too with a different rom but to fix it, i went to messaging, pic/video options, servers, and i chose the one for my phone, Alltel MMSC.
MMS
Just FYI I just installed Arcsoft MMS v5.0.82.79 and it works perfectly with my Touch Pro. No lag in sending or receiving. I tested sending to my wife's phone and she received it within 15 seconds. Same for her sending MMS to my phone. I'm running the 102 version of NFSFAN's 6.5 ROM. Hope this helps!
make sure the mms has the right internet connection selected for connect via in the server settings
n
If you get the Arcsoft MMS v5.0.82.79 CAB from PPCGeeks forum it has all of the settings built in....I think. I just installed it and didn't have to do any additional tweaking. It just works great!

Radio 1.14.25.35 from official FUZE ROM Breaking MMS

Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.

On Rogers with SMS time problem..

Hey all, i originally posted this problem in January, still no fix.
Wondering if any of the new folks to the forum have any suggestions.
I am using an unlocked TG01 from Orange (UK) on Rogers in Canada (GMT -5), using the official 6.5 ROM. CE OS 5.2.21840 (Build 21840.5.0.60)
My SMS messages recieved are logged 5 hours behind current time. My SMS messages sent are logged at the current time. My suspicion is that it has to do with the origin of the phone, from the UK.
I have searched xda forums and modaco forums, microsoft, and google.
I have total commander, and have modified the registry in a few was, as described below:
I have added the TrustTimeZoneField field dword (in HKLM\System\Phone Settings\OEM ... or whatever it was.)
I have modifed HKLM\Time Zones to include Eastern Standard Time with the proper TZI file.
I have tried to set the timezone to another setting (like GMT -3) reset the phone, and then change it back, and it doesn't not work.
I have download a cab file that was supposed to fix it too.
I am looking for any other ideas, please, and thanks.
Rogers Canada Connections Settings
I followed rogers settings I found on from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
Settings: I followed this from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
source site:modmymoto, forums, thread 17207
Could you provide a direct link to that thread? I'm not able to find it.
ya i got the same problem but with the topaz
Anyone out there got a "new" fix?
Rogers settings
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
that_dood said:
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
Click to expand...
Click to collapse
Thanks for the reply. I applied the cab, soft reset, test SMS has the same problem. Time sent 2:16am, time recieved 10:16pm
Bump...........
mms
Did you ever get your mms working?? I got mine going with this http://www.stephenwagner.com/?p=33

Categories

Resources