How to flash your device for changing splash screen won't hard-reset your device. But you should still make a backup .
i. Create the wallpaper 480x640
Advice : when the Raphael starts, you can see 3 red lines (R, G, D number versions) : the 100 low pixel are black, whatever your wallpaper... that's why, I suppose, every splash screen I saw are always black
And you should take care of that (just use the 540 high pixel, and leave the 100 low black)
ii. If not already done, convert the image to a .bmp (just use paint and save as a 24 bit bmp)
iii. Run rsbbmp.exe, the RSB<->BMP converter, to convert your .bmp to a .rsb
Just clic on "Add files", select your .bmp files, and then, "convert all"
This will create a .rsb file in the same folder as your .bmp file
iv. Run Splash-RSB Converter.exe, the RSB<->NB converter.
Choose the VGA option. This will create a .nb file in the same folder as your .rsb file
v. run NBHutil.exe, the NB<->NBH converter (the NBHUtil.xml file have to be in the same folder as NBHUtil.exe).
On first tab "Build NBH", in the "Target Device" list, choose "Raphael" (at the end of the list).
Then, on the right on the windows, you'll have the "NBH Items". Clic on the "..." button of splash item. An "Open" windows pops up : select the .nb file that you just created. Finally, clic on button "Build NBH!"
This will create a .nbh file (in the location that you choose).
vi. Copy/paste this file in the same folder as RaphaelCustomRUU.exe, run it & follow instructions as usual for a flash of your Raphael.
vii. Enjoy
I'm also curious on a how-to
Yes please, I would like to take off the t-mobile boot screen.
Hi guys found this hope it can work for the pro also will try it myself and let you know if it does.
Cook your splash screen
The problem is we dont know yet the correct address for Touch Pro splash screen to convert to nbh. And I think if u want to try, better try Diamond Splash tool & not this one.
Splash
Diamond splash tools, able to convert to nbh but when when u flash to Touch Pro, promth message " wrong device ID"
vyap said:
Diamond splash tools, able to convert to nbh but when when u flash to Touch Pro, promth message " wrong device ID"
Click to expand...
Click to collapse
The device ID in diamond is DIAM*** but in raphael es RAPH***
So take care when you create the NBH file using htcrt or NBHGen. The NB splash from Diamond is valid.
Cheers
I want to backup my current splash first just in case something happens and I need to bring it back again (t-mobile). Anybody has one already or has procedures in extracting the splash from your ROM?
jcespi2005 said:
The device ID in diamond is DIAM*** but in raphael es RAPH***
So take care when you create the NBH file using htcrt or NBHGen. The NB splash from Diamond is valid.
Cheers
Click to expand...
Click to collapse
jcespi2005,
I managed to splash. thanks for your advice.
vyap said:
jcespi2005,
I managed to splash. thanks for your advice.
Click to expand...
Click to collapse
Would be great if you update your first post and make a little guide for other users to change their splash too
Cheers
Noted. Trying my best now.
vyap said:
Noted. Trying my best now.
Click to expand...
Click to collapse
Nice done
Thanks for your contribution...
@vyap
Thanks alot mate! Ur new NBHUtil.xml really have all the address for Raphael Thanks again.
And confirmed same like Diamond.
OK, just for idea & example of my humble ROMeOS² bios alike splashscreen.
Anyone happen to have the original 1st bootsplash?
tamAyT said:
Anyone happen to have the original 1st bootsplash?
Click to expand...
Click to collapse
If you mean the HTC one, you can get it from the WWE shipped ROM
Cheers
Yes, thank you for reminding me but I've flashed some rom and now have an AT&T bootsplash
hang.tuah said:
OK, just for idea & example of my humble ROMeOS² bios alike splashscreen.
Click to expand...
Click to collapse
Thanks, had this on my Kaiser too.
Currently flashing to my Raphael.
[edit]Complete! Of course works ok.
tamAyT said:
Yes, thank you for reminding me but I've flashed some rom and now have an AT&T bootsplash
Click to expand...
Click to collapse
The HTC Splash taken from WWE Shipped ROM
Cheers
jcespi2005 said:
The HTC Splash taken from WWE Shipped ROM
Cheers
Click to expand...
Click to collapse
te amo mucho
Related
The primary purpose of this thread is so that you can post your WM06 (and WM05) themes and splash screens; we will link this in the wiki. Over the next several days, I will be posting some simple instructions on replacing your splash screen and boot graphics, however that information can already be found in the wiki. Feel free to attach any today themes, splash screens, instructions etc.
When you post, please attach a picture so we know what we are downloading and zip file of the graphics so they are not resized by the server.
To get started I have attached a template for making a windows splash, as well as my template I personally use on my device. The "silence of the lambs" style picture hopefully scares the person into returning my device if lost or stolen. I included the templates in the zip file; you can edit your name and contact info; portrait version only. More to follow.
-mix
How do I change my windows splash screen?
Create or download the splash screen of your choice, it can be up to 320x320 and 96 dpi. Save the file as welcomehead.96.png and save it to the /windows directory of your device. You may need Resco Explorer or a similar tool to overwrite the current file.
The image should appear when you reboot.
I will attach some splash images below over the next several days.
How do I change the boot splash? From this post: http://forum.xda-developers.com/showpost.php?p=1140696&postcount=6
A method for 1.01 MFG can be found on the wiki; if you do not want to SuperCID your device permanently though, you need to use SSPL-HERM.exe.
Requirements
nb_image_converter.exe, e.g. from Hermes SplashScreen_Pack.zip
nbhgen.exe, e.g. from this forum topic
any official ROM image
Full steps
Create a BMP file in paint, size must be 240x320.
Save it as BMP 24bit.
Load it on nb_image_converter.exe and save it as splash.nb
open a cmd.exe command prompt on the folder where you saved your splash
run this command
copy /b splash.nb+padding.nb finalsplash.nb
Check that filesize of "finalsplash.nb" is exactly 262144 bytes.
create a samples.txt with the following contents
HERM200
HTC__001
1.23.707.6
USA
600,finalsplash.nb
601,finalsplash.nb
You may need to adjust HERM200 to HERM100 or HERM300 based on your model).
And you can have a different subsplash if you repeat steps 1 to 5 with a different file.
run the following command on a shell in the same folder:
nbhgen.exe sample.txt
extract the ROM image, e.g. with WinRAR
rename the .nbh file inside that folder to .bak
move your newly generated RUU_signed.nbh into the same folder
put SSPL-HERM.exe onto your device
run SSPL-HERM.exe on the device
check that the Tricolor screen will appear and show SPL-1.09.ds
run ROMUpgradeUt.exe
List compiled from three different existing tutorials - credits go to those! - and tested successful yesterday From CCRDude
I have only included files that I have created in this first post. If you would like your files added, please let me know. Both the PNG and JPG are included in the zip.
-mix
How do I add today themes to my device?
You can simply drag and drop the .tsk files into the my documents folder on your device using activesync.
kyphur has a page loaded with great themes
Feel free to post your favorite today theme's.
-mix
This post left open for uploads.
Something from me
Hope some one likes it
Radical_MT said:
Hope some one likes it
Click to expand...
Click to collapse
The skull picture is exactly the same as one made by a moderator on a well known pocket pc warez site for use as a theme!
I wonder why some people are so obsessed with skulls.
Here is a welcomehead.96.png file (to replace the windows 96 startup screen) for all you Mac users who have to use windows for your mobile environment, (for now, at least).
backfindpost
sorry, just an ordinary bvp
m-unit said:
sorry, just an ordinary bvp
Click to expand...
Click to collapse
To quote Chris Farley: I'm sorry, I don't speak Japanese.
boz said:
The skull picture is exactly the same as one made by a moderator on a well known pocket pc warez site for use as a theme!
Click to expand...
Click to collapse
I took this skull pic from somewhere msn themes. Sorry if i'm stealing someone else pics. Lol. What about this one?
Hi there!
Liked a lot this Skull!
Can you provide in a CAB format?
thanks
Radical_MT said:
Hope some one likes it
Click to expand...
Click to collapse
Doubt...
Could someone help me?
I dind't understand what I have do to in this part:
(...)
run the following command on a shell in the same folder:
nbhgen.exe sample.txt
extract the ROM image, e.g. with WinRAR
rename the .nbh file inside that folder to .bak
move your newly generated RUU_signed.nbh into the same folder
put SSPL-HERM.exe onto your device
run SSPL-HERM.exe on the device
check that the Tricolor screen will appear and show SPL-1.09.ds
run ROMUpgradeUt.exe9
Click to expand...
Click to collapse
I'd like to create a new splash screen with HTC official logo:
I created a finalsplash.nb and the .txt, but now I don't know what I have to do... :\
Hi,
Look here http://www.molski.biz
Click on How to and search for the Molski development Kitchen ROM. You find answers to this and more doubts you may have!
Good luck!
hiroshi.rio said:
Could someone help me?
I dind't understand what I have do to in this part:
I'd like to create a new splash screen with HTC official logo:
I created a finalsplash.nb and the .txt, but now I don't know what I have to do... :\
Click to expand...
Click to collapse
Thanx a lot, but...
epimazzo,
Thanx a lot, but it didn't work...
I already read this tutorial here on forum, but the problem is: I wanna change only the first splash screen, not the 1st n 2nd.
Can I use this program to create only the first splash screen with HTC's logo? Cos the 2nd splash screen I'm using this:
I just made this for my 8525 startup animation.
Now all I need is a scary laugh to replace the standard wav..
hiroshi.rio said:
Could someone help me?
I dind't understand what I have do to in this part:
I'd like to create a new splash screen with HTC official logo:
I created a finalsplash.nb and the .txt, but now I don't know what I have to do... :\
Click to expand...
Click to collapse
This is what you have to do...
* YOU NEED BOOTLOADER 1.01MFG ON YOUR DEVICE FOR THIS TO WORK *
For full instructions see:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
Hermes Splash Screen Howto
---------------------------
Create a BMP file in paint, size must be 240x320.
Save it as BMP 24bit.
Load it on nb_image_converter.exe and save it as splash.nb
open a cmd.exe command prompt, go to folder where you saved your splash
run this command:
copy /b splash.nb+padding.nb finalsplash.nb
Filesize of "finalsplash.nb" should be exactly 262144 bytes.
Now put your phone in bootloader mode (side ok + power button + softreset)
Connect to bootloader using mtty.exe and load splash screen using these commands:
For first splash screen (MainSplash):
USB> task 32
USB> lnb finalsplash.nb 500e0000
USB> task 8
For Second splash screen (SubSplash):
USB> task 32
USB> lnb finalsplash.nb 50140000
USB> task 8
You dont need BOOTLOADER 1.01MFG,
Read MrVanx's guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=20&Itemid=27
and follow it word for word.
If you dont want to replace the second splash then either dont include the SubSplash or use the existing one you have.
I followed his guide yesterday and it worked perfectly for me and ive got SPL:2.10.oli
I downloaded a screen splash on this thread:
http://forum.xda-developers.com/showthread.php?t=292014
I changed the second splash screen to WM crossbow only with a simple .cab. Can I create a .cab to install on device? It seems more easy... :?
I installed a dialpad skin without removing the previous one (i forgot!)
To make matters worse, I then installed a third one over the top (again forgetting to remove the first two) to fix things
I now have a severely messed up dialpad.
What is the easiest way to remove all the dialpad skinning and get back to default blank settings, without hard reset?
Pyrofer said:
I installed a dialpad skin without removing the previous one (i forgot!)
To make matters worse, I then installed a third one over the top (again forgetting to remove the first two) to fix things
I now have a severely messed up dialpad.
What is the easiest way to remove all the dialpad skinning and get back to default blank settings, without hard reset?
Click to expand...
Click to collapse
have you tried removing the last skin from the remove prog. and then soft- resetting...
these are spb-dialpad skins that you used
I installed each one in turn again, then correctly un-installed it.
That left me with a blank white dialpad.
I have now installed a working one and its fine! yay.
Back to the original problem before I caused all this.
i have a nice iPhone dialpad, but its not VGA. Does anybody know how to modify the theme to make it VGA compatible?
Im willing to do the work/put in the time but I have no idea where to start.
Are there simply images that must be re-sized? Is there an editable file with x/y values for the buttons etc?
Any ideas?
Pyrofer said:
I installed each one in turn again, then correctly un-installed it.
That left me with a blank white dialpad.
I have now installed a working one and its fine! yay.
Back to the original problem before I caused all this.
i have a nice iPhone dialpad, but its not VGA. Does anybody know how to modify the theme to make it VGA compatible?
Im willing to do the work/put in the time but I have no idea where to start.
Are there simply images that must be re-sized? Is there an editable file with x/y values for the buttons etc?
Any ideas?
Click to expand...
Click to collapse
the iphone dialpad you have is mostlikely for the eten dialer...in which case there is not much you can do...how-ever if you would like to build a dialer just uncompress the spb dialer cab...these are the file with the dimensions that you need to make
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Pyrofer said:
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Click to expand...
Click to collapse
I use IZArc. It's free and can handle most archive formats including cabs. I use it for everything except zip, which is native to Win XP.
http://www.izarc.org/download/IZArc_Setup.exe
Pyrofer said:
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Click to expand...
Click to collapse
use this theme it is VGA and it solves the problem it is WM6 VGA dialpad theme for WM5 devices. Hoop that it helps try it !!! after installing retsart your Athena or Ameo and you will see the WM6 dialpad VGA theme.
direct download if note helped then go below to the site and read the first post there and downlaod theMobile 6 Crossbow Dialpad for WM5 VGA devices
http://mahmood1.com/Documents/wm6_vga_dialpad.rar
http://mahmood1.com/themes.aspx
Thanks for those, what I actualy need is to know how to edit an existing Non-VGA dialpad to be vga.
Is it just matter of re-sizing the images in the cab? I get the feeling that some hex editing of .dll or .exe files may be needed.
Pyrofer said:
Thanks for those, what I actualy need is to know how to edit an existing Non-VGA dialpad to be vga.
Is it just matter of re-sizing the images in the cab? I get the feeling that some hex editing of .dll or .exe files may be needed.
Click to expand...
Click to collapse
you need cabmanager to do the job i have PM'd you the dowload link download and all the instructions are included there !!! you can extract all exe files or any files from CAB and you can make CAB files !!! it is the best prograam in managing CAB files !!
Mahmood said:
you need cabmanager to do the job i have PM'd you the dowload link download and all the instructions are included there !!! you can extract all exe files or any files from CAB and you can make CAB files !!! it is the best prograam in managing CAB files !!
Click to expand...
Click to collapse
Hi Mahmood. Any chance you can share that info with me too? Cheers.
mackaby007 said:
Hi Mahmood. Any chance you can share that info with me too? Cheers.
Click to expand...
Click to collapse
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Mahmood said:
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Click to expand...
Click to collapse
Thanks again Mahmood, you da man.
Yes indeed.
Thanks very much.
Mahmood said:
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Click to expand...
Click to collapse
Hi Mahmood !
Another PM is possible to make my VGA dialpad skin with an existing QVGA one ?
Thanks
So... want to make Splash screens for your device? well, now you can.
USAGE:
1) dump a splash screen from an NBH with NBHExtract. (SubSplash or MainSplash will do)
2) Run the Converter program to convert the .NB to an .RSB (select VGA)
3) Run the RSB<->BMP converter to convert it to an editable BMP.
4) edit the BMP with your preferred editor however you like, but do NOT resize or rotate it (well, if you do rotate it, rotate it back after!)
5) Run the RSB<->BMP converter to convert BACK to a .RSB
6) Run the Converter to convert the RSB BACK to an NB.
7) open sample.txt and edit the two file names AFTER 600, and 601, - DO NOT CHANGE ANYTHING ELSE.
8) open a command prompt at this folder and do "nbhgen sample.txt"
9) flash the RUU_Signed.nbh with the Athena updater, you MUST be running Hard-SPL (1.20.Olipro) to flash!
10) Profit. - I mean erm... done.
Olipro said:
So... want to make Splash screens for your device? well, now you can.
USAGE:
1) dump a splash screen from an NBH with NBHExtract. (SubSplash or MainSplash will do)
2) Run the Converter program to convert the .NB to an .RSB (select VGA)
3) Run the RSB<->BMP converter to convert it to an editable BMP.
4) edit the BMP with your preferred editor however you like, but do NOT resize or rotate it (well, if you do rotate it, rotate it back after!)
5) Run the RSB<->BMP converter to convert BACK to a .RSB
6) Run the Converter to convert the RSB BACK to an NB.
7) open sample.txt and edit the two file names AFTER 600, and 601, - DO NOT CHANGE ANYTHING ELSE.
8) open a command prompt at this folder and do "nbhgen sample.txt"
9) flash the RUU_Signed.nbh with the Athena updater, you MUST be running Hard-SPL (1.20.Olipro) to flash!
10) Profit. - I mean erm... done.
Click to expand...
Click to collapse
Now this is too damn cool! Thanks bro!!! Can't wait to put my company logo on my device :-D
Nice one Olipro.
no problem, I noticed I made a typo in the instructions on the RSB header appender/remover. but it doesn't matter, still works.
Work like a charm Olipro.
I have now my favorite car (black carrera gt )
problems...
My splash screen started screaming at me and cussing when I used your software Olipro. It also flashed the finger at me and flashed a butt. How do I undo it? What happened?
LOL, sorry bro....had to do it.
ltxda said:
My splash screen started screaming at me and cussing when I used your software Olipro. It also flashed the finger at me and flashed a butt. How do I undo it? What happened?
LOL, sorry bro....had to do it.
Click to expand...
Click to collapse
HAHAHA! you bellend.
ltxda said:
My splash screen started screaming at me and cussing when I used your software Olipro. It also flashed the finger at me and flashed a butt. How do I undo it? What happened?
LOL, sorry bro....had to do it.
Click to expand...
Click to collapse
ROFL you badass. lol
sorry but i need some help here....
I m stuck at
8) open a command prompt at this folder and do "nbhgen sample.txt" <-----
9) flash the RUU_Signed.nbh with the Athena updater, you MUST be running Hard-SPL (1.20.Olipro) to flash!<-------
dun really understand what both means.....
Thanks
bLiTz^ said:
sorry but i need some help here....
I m stuck at
8) open a command prompt at this folder and do "nbhgen sample.txt" <-----
9) flash the RUU_Signed.nbh with the Athena updater, you MUST be running Hard-SPL (1.20.Olipro) to flash!<-------
dun really understand what both means.....
Thanks
Click to expand...
Click to collapse
Step 8 just means you run the application at DOS.
For example you extract the folder at the Root directory of C: then you should have something like:
C:\Splash-RSB Converter\nbhgen sample.txt
By doing step 8, you'll generate 'RUU_Signed.nbh' file
Step 9 means, you copy the generated 'RUU_Signed.nbh' to the folder where you previously extracted the Original ROM and replace the original 'RUU_Signed.nbh' with it.
Prior to flashing this splash screen, you need to have Olipro's HardSPL v1.2 already flashed to your device.
BTW, I attach the tool (which I got from BuzzDev) to convert BMP<->RSB
Finally, just want to say thanks to Olipro
Cheers!
If I flash a new splash screen will it hard reset and then I will have to reinstall all software?
Hello everyone, I am just asking if it is possible to flash different splash screen on Titan? First screen you see like VZW xv6800 say VERIZON on white background before animated gif startup begin (VZW_Startup.gif) so.. can I change the VERIZON? Thanks!
Hiromitsu
Look on in your \windows dir on your PPC for any .png & gif files that look like the ones that initiate when your phone starts. For the Sprint Mogul & Alltel PC6800, one of the spash screens is called welcomehead.96.png on both.
Once you find the stock .png & gif files on \windows, rename any custom animated pic after the .gif file and do the same for a .png pic. Then copy into \windows using Total Commander, etc and overwrite. Also make sure that they are the same 320x240 size.
So lets say on your VX6800 that you have a splash screen called VZW_6800.96.png in your \windows dir thats starts up with your phone now... You would:
1. Load, edit and rename YOUR 320x240 custom pic VZW_6800.96.png using Paint on your PC.
2. Paste pic into a folder somewhere on your device that you can access.
3. Using Total Commander, Copy this pic into \windows and a screen asking you to overwrite will popup. Click yes.
4. Done.
Do the same for a .gif.
1. Load, edit and then name YOUR 320x240 custom .gif, VZW_Startup.gif on your PC.
2. Paste .gif into a folder somewhere on your device that you can access.
3. Using Total Commander, Copy this pic into \windows and a screen asking you to overwrite will popup. Click yes.
4. Done.
welcomehead.96.png does exist on the XV6800. It is not the verizon splash though. That is the WM splash screen.
Yes, VZW splash is load from ROM so need cook in kitchen for this one. I just want know how to change this only. I already change animate GIF and WM screen.
Hiromitsu
blazingwolf said:
welcomehead.96.png does exist on the XV6800. It is not the verizon splash though. That is the WM splash screen.
Click to expand...
Click to collapse
I didnt know if it existed or not; I was using it as a reference for what to look for and how to go about accomplishing it. I hear Verizon & Sprint have animated startups whereas the Alltel 6800 does not. But we do have the welcomehead.96.png. I do not believe that you must cook a new rom to make these changes...
I have explain this plainly already,,
for VZW Titan XV6800....
There 3 startup splash,,
In ROM:
1.) Solid white screen not moving VZW logo. (15 sec)
In device:
2.) Animate VZW logo -> VZW_Startup.gif (10 sec)
3.) WM Startup wallpaper -> welcomehead.96.png (Varies)
If I install other carrier ROM,, first still image (VZW) is VZW... even though change carrier ROM... so its burn in boot code.....
these images will be available when verizon releases a rom update. the current verizon rom available was dumped from a running xv6800 and does not include the images you want, which are mainsplash.nb and subsplash.nb. these are separate from os.nb, all are contained in the nbh you flash. the dumped verizon rom available only included os.nb
dcd,,
Can I replace mainsplash.nb and subsplash.nb now?
If I make my own splash nb file I can already flash it?
Thanks
Hiromitsu
argh
use nb_image_converter_859_418_826.exe found here: http://forum.xda-developers.com/showthread.php?t=253308
use nbhgen found here:
http://forum.xda-developers.com/showthread.php?t=294046
use this config:
TITA1000
HTC__001
2.17.651.0
USA
600,01_MainSplash.nb
601,02_SubSplash.nb
all of this info found easily using search feature at xda forums
I've just managed to ahem, persuade Orange UK to sim unlock my Niki 12 weeks early.
The next thing I'd like to do is replace the orange boot splash screen to one of my own.
Maybe with one of R'kids stunning paintings http://www.artworkbysteve.co.uk/
Do I first need to CID unlock my Niki to do this?
Is there any software that is capable of doing this without bricking my phone?
I've done this previously with my wizard, but I'm still a little unsteady on my feet,
I need clear easy to follow step by step newbie instructions if anybody has the time.
Any help greatly appreciated,
Cheers.
Interested too
/Windows/animated.gif
in "animated.zip" there is the original boot splah of htc.
with "Advanced Configuration Tool" (http://forum.xda-developers.com/showthread.php?t=317070) is possible to change the default location of startup animation's file.
garsim said:
/Windows/animated.gif
in "animated.zip" there is the original boot splah of htc.
with "Advanced Configuration Tool" (http://forum.xda-developers.com/showthread.php?t=317070) is possible to change the default location of startup animation's file.
Click to expand...
Click to collapse
Great! tanx
Resaponse
....But can I do this without CID unlock me ole mucker?
garsim said:
/Windows/animated.gif
in "animated.zip" there is the original boot splah of htc.
with "Advanced Configuration Tool" (http://forum.xda-developers.com/showthread.php?t=317070) is possible to change the default location of startup animation's file.
Click to expand...
Click to collapse
Damn, doesnt work. It always show the orange logo in startup
any idea?
tanx
ariandax said:
any idea?
Click to expand...
Click to collapse
nothing
To change the actual boot splash which contains the operator logo and ROM info text you need to flash it! the TD (Niki) has 4 splash screen as follows:
1-Primary Splash (Operator Logo)
2-Secondary Splash again operator logo with the ROM Protocol info at the bottom of screen in red.
3-Splash Gif animation
4-Splash Welcomehead i.e. WM6 splash you get before Today loads.
Splash 3 and 4 can easily be changed as mentioned here. I think what you need is to change Splash 1 and 2 if you want to get rid of the Orange logo however this can only be done through flashing (via customRUU) so you must make sure your TD has HardSPL otherwise you will end up bricking the device if you haven't check this thread:http://forum.xda-developers.com/showthread.php?t=355730
At the moment I can only change the 1st Splash but can't seem to change the 2nd splash once I can figure out how, I will post the necessary files here
Here is a thread that shows how change your PrimarySplash screen. You do need to flash it, but its not that hard to do.
http://forum.xda-developers.com/showthread.php?t=361287
second one is easy to change. Just rename any .png picture to welcomehead.96.png and put in Windows folder on phone, replacing the one that's there. Then soft reset.
Thanks
Cheers fellas, I appreciate your help.
odd problem with Welcomehead 96
Tried overwriting the welcomehead.96 file but it can't be overwritten,
checked the properties of the file and all the options (read only etc) are greyed out?
Copied the file to my hard drive and it cannot be seen, even when I have the show hidden files folder option checked?
I'd hazard a guess that the PNG file is hard coded to the memory chip? so a Rom flash may be needed?
But I still can't work out why the copied PNG on my hard drive would behave the way it is,
maybe just having a thick attack.
I haven't come across this before, can anyone shed some light on it?
martinartois said:
Tried overwriting the welcomehead.96 file but it can't be overwritten,
checked the properties of the file and all the options (read only etc) are greyed out?
Copied the file to my hard drive and it cannot be seen, even when I have the show hidden files folder option checked?
I'd hazard a guess that the PNG file is hard coded to the memory chip? so a Rom flash may be needed?
But I still can't work out why the copied PNG on my hard drive would behave the way it is,
maybe just having a thick attack.
I haven't come across this before, can anyone shed some light on it?
Click to expand...
Click to collapse
You can't overwrite files in the windows folder with the built in file explorer use Resco File Explorer or download freeware Total Commander from here: http://www.ghisler.com/pocketpc.htm
Thanks
Cheers gfreek,
I overwrote welcomehead 96 as recommended with Total Commander.
Thanks for your assistance, it's appreciated.
gfreek said:
At the moment I can only change the 1st Splash but can't seem to change the 2nd splash once I can figure out how, I will post the necessary files here
Click to expand...
Click to collapse
Here's how I changed both the 1st & 2nd Splash screens on my Wife's Touch Dual:
First create two splash screens (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site.
1. Use Dark Simpson HTC ROM Tool
2. Select 'Hermes' as device
3. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
4. Select your Primary & Secondary Splash
5. Create the NBH file
6. Flash with the Touch Dual CustomRUU extracted from Niki Project's ROM.
Cheers!
[email protected] said:
Here's how I changed both the 1st & 2nd Splash screens on my Wife's Touch Dual:
First create two splash screens (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site.
1. Use Dark Simpson HTC ROM Tool
2. Select 'Hermes' as device
3. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
4. Select your Primary & Secondary Splash
5. Create the NBH file
6. Flash with the Touch Dual CustomRUU extracted from Niki Project's ROM.
Cheers!
Click to expand...
Click to collapse
Thanks for pointing me in the right direction! Followed as per your instruction and finally got both 1&2 splash changed however both splash's are about 10-15 pixel off center to the right, with the bottom part being black:-/ see attached images below;
I can't understand why??? am I missing something? all the splash I've used are QVGA 240x320 so they are the correct size!!
Appreciate your help on this one!
***SOLVED***
gfreek said:
Thanks for pointing me in the right direction! Followed as per your instruction and finally got both 1&2 splash changed however both splash's are about 10-15 pixel off center to the right, with the bottom part being black:-/ see attached images below;
I can't understand why??? am I missing something? all the splash I've used are QVGA 240x320 so they are the correct size!!
Appreciate your help on this one!
Click to expand...
Click to collapse
Update***SOLVED*** Once again thanks [email protected] for pointing me in the right direction however, to create the two splash (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site and here: http://forum.xda-developers.com/showthread.php?t=361287 is "NOT COMPATIBLE WITH NIKI" hence the reason I ended up getting corrupted splash screens (see the images in my last post)
The Correct Procedure is as Follows:
1. Make sure you have HardSPL installed if not get it here: http://forum.xda-developers.com/showthread.php?t=355730
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Get SplashTool from here: http://forum.xda-developers.com/showthread.php?t=334904
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as PrimarySplash do the same load another BMP and this time save as SecondarySplash
5. Open SplashTool.exe and convert both PrimarySplash.nb and SecondarySplash.nb to new format.
6. Use Dark Simpson HTC ROM Tool get it here: http://forum.xda-developers.com/showthread.php?t=311909
7. Select 'Hermes' as device
8. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
9. Select your Primary & Secondary Splash
10. Create the NBH file
11. Flash with the Touch Dual CustomRUU get it here: http://forum.xda-developers.com/showthread.php?t=356259
Enjoy your new splash screen
Credits to Pof, MadKat, Dark Simpson, Jockyw2001 and Midget_1990!!!!
P.S. For those of you who are getting the vista "COMDLG32.OSX" error when trying to run madkat's NB image converter download and install the attached file and re-run the convertor should work
gfreek said:
Update***SOLVED*** Once again thanks [email protected] for pointing me in the right direction however, to create the two splash (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site and here: http://forum.xda-developers.com/showthread.php?t=361287 is "NOT COMPATIBLE WITH NIKI" hence the reason I ended up getting corrupted splash screens (see the images in my last post)
The Correct Procedure is as Follows:
1. Make sure you have HardSPL installed if not get it here: http://forum.xda-developers.com/showthread.php?t=355730
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Get SplashTool from here: http://forum.xda-developers.com/showthread.php?t=334904
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as PrimarySplash do the same load another BMP and this time save as SecondarySplash
5. Open SplashTool.exe and convert both PrimarySplash.nb and SecondarySplash.nb to new format.
6. Use Dark Simpson HTC ROM Tool get it here: http://forum.xda-developers.com/showthread.php?t=311909
7. Select 'Hermes' as device
8. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
9. Select your Primary & Secondary Splash
10. Create the NBH file
11. Flash with the Touch Dual CustomRUU get it here: http://forum.xda-developers.com/showthread.php?t=356259
Enjoy your new splash screen
Credits to Pof, MadKat, Dark Simpson, Jockyw2001 and Midget_1990!!!!
P.S. For those of you who are getting the vista "COMDLG32.OSX" error when trying to run madkat's NB image converter download and install the attached file and re-run the convertor should work
Click to expand...
Click to collapse
Oh.......Same post for me
http://forum.xda-developers.com/showthread.php?t=367370
Anyway u faster 30 seconds gfreek
tom_codon said:
Oh.......Same post for me
http://forum.xda-developers.com/showthread.php?t=367370
Anyway u faster 30 seconds gfreek
Click to expand...
Click to collapse
Kudos to you tom!! sorry if I double posted in any case I think yours is a much simpler neater method then the one I've posted here
thanks.
Un Saludo.