Hi guys !
I've tryed to upgrade my S200 G4 with a latest rom for my girlfriend but the upgrade seems to have failed. Now when I plug my S200, it auto reboot every 2 secondes. It displays the RGB mode during 2 sec, then it reboot, it displays the RGB during 2 sec, then it reboot etc...
Sometimes, if I removed battery during few minutes, then plug it, it doesn't reboot quickly, so I launch an upgrade process but I've got an error [CONNECTION ERROR].
I've tried many solutions found on XDA but no way
Did somebody has an idea to help me please ?
try to charge your battery. Make sure it was 50% charge before flashing...
Ok I will try it. That's because with RGB mode I can't see the percentage of charge Thanks
Starguezer said:
Hi guys !
I've tryed to upgrade my S200 G4 with a latest rom for my girlfriend but the upgrade seems to have failed. Now when I plug my S200, it auto reboot every 2 secondes. It displays the RGB mode during 2 sec, then it reboot, it displays the RGB during 2 sec, then it reboot etc...
Sometimes, if I removed battery during few minutes, then plug it, it doesn't reboot quickly, so I launch an upgrade process but I've got an error [CONNECTION ERROR].
I've tried many solutions found on XDA but no way
Did somebody has an idea to help me please ?
Click to expand...
Click to collapse
PLUG YOUR PROPHET TO PC
FORCE BOOTLOADER MANUALLY SEE MY POST 1 IN THE STICKY SECTION FOR " HOW TO"
........
I've tryed to force it to boot mode but it auto reboot so it doesn't stay in boot mode.
I'm charging the battery and I will try it again after.
I've charged the battery during all the day and now when I try to switch on the device, it stay turned off, nothing displayed on the screen.
I've removed battery during 15min, switch on then it display RGB mode during a second and shutdown. No way to stay it turned on. Can't access to boot mode manually with comm button...
Did the battery is out of order ? Did I have to bought a new one ? Is there another solution ?
Starguezer said:
I've charged the battery during all the day and now when I try to switch on the device, it stay turned off, nothing displayed on the screen.
I've removed battery during 15min, switch on then it display RGB mode during a second and shutdown. No way to stay it turned on. Can't access to boot mode manually with comm button...
Did the battery is out of order ? Did I have to bought a new one ? Is there another solution ?
Click to expand...
Click to collapse
1. try to charge the battery on the other charger,
2. if battery cannot be charged, change a new one,
3. then normal operation steps...
Thanks for the tips, I will try it
I'e pluged it with the AC adapter and it has recharge the battery ! It was the reason of the RGB mode highlights !
I've make an upgrade and it works !!!
So many thanks guy !!!
Related
My Mobile Screen is blank and is not turning on. It happened by it self, I was not upgrading nor charging. Only thinking I can tell is that when ever I'm charging it is showing RED light instead of Yellow. If I remove the battery and put it on cardle to charge, cardle will show that the battery is Full by GREEN Light.
I hope it can be fixed. Would appreciate if some one can help me ASAP.
Thankx in advance
try softreset
try hardreset
try leaving the batt out for a long time
I tried all that but still same. Neither Soft nor Hard reset or taking the battery out. Nothing on the screen, its blank.
Unfortunely i having the same problem, i suspect the backup battery problem ....
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
jspasatc said:
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
Click to expand...
Click to collapse
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?[/quote]
I sent my hima to a service repair center to check the soldering on the mainboard. It's not an authorized repair center, as there's none in Macedonia, it's a place for repairing digital cameras and stuff. It's the place where they changed my bottom connector few months ago, so I thought that the problem might be in the connector soldering (something loossened or something) but , I was told yesterday that the hardware seems ok and there's no problem whatsoever with the connectors and the m/b. This is how it all started:
My problem started a week after I upgraded to tofclock's 2k5 2.01wwe, and after altering the shell.exe file and the registry in order to get the clock shown in the title bar instead of the battery indicator. So after couple of days enjoying the 2k5, one morning my phone turned off, and I couldn't power it. I tried soft reset, tried hard reset, nothing. So I thought I should reflash it, but I couldn't enter b/l mode. I try leaving the battery out for some time (couple of hours) and when I place it back, the screen turns on, just a plain white light for about 15 seconds, and then turns off again. If I try hard reset, the screen lights up again (white screen, no image or anything) and after 15 seconds turns off and so on. I noticed that when the screen lights up after hard reset, if I place the hima in the cradle, the white screen stays on for 3 minutes, and this was exactly my settings in the power management(15seconds on battery, 3 mins on craddle), and the led light in the upper right corner is yellow, and after some time, it turns to green, as in battery charged. Active sync doesn't recognize the phone, I can't get serial screen, and nothing other than what I described in this post. I've tried hundreds of times the entire procedure, but nothing still.
Any ideas. Thanks,
J.
Latest news:
After many attempts to enter b/l, I wasn't successful. Now I placed the device in the cradle, the screen turned white as usual, the amber light turned on, and I received a message in the system tray in my pc the a new hardware was detected, and that XP is instaling..... After that, I received a message that the new device is Windows based Mobile Device.
And then, xp created a new LAN, but , it shows a limited or no connectivity.
why is this happening? And what is happening?
the pda show up as shuch if it's ready to receive a rom from the rom upgrade
But still, when I start himaupgradeut_noid.exe I get error 101, connection error
Note that I only get ehite blank screen, and not serial v1.06/usb v1.06, like I had before my last upgrade to 2k5. perhaps the b/l is corrupted or something?
cheers,
J.
hi guys,
Is this the backup battery we need:
http://www.ipaqrepair.co.uk/view_product.php?product=375
Please advise,
10x,
Jordan.
Well,my U20i (x10 Mini Pro) have using a custom Rom for a long time and it is really great....until one day (this post date) my phone turn off by me because I want to conserve the battery,and then when I want to turn it on,it vibrate (with no light) and I can see the LCD displaying a very ultra low light level of screen (same like phone won't boot screen) so I reflash it again using the Rom I like but not work... :'(
I'm now try to recover my phone using Update Service aka SEUS right?And can someone give me other way to fix this problem?Also my accelerometer seems not working/functioning when this problem occur...yesterday everything was great but this day the problem occured...
Have you try the factory reset? Long ago my E10i can't use the WiFi, when i turn it on there's no hotspot detected and after 5 second it turn off automatically, even if i try to flash the ROM again, the problem still occur... Until i do the factory reset, it's working normally again... Just give it a try ,well if you don't mind to lose your apps...
Satan_Disciple said:
Have you try the factory reset? Long ago my E10i can't use the WiFi, when i turn it on there's no hotspot detected and after 5 second it turn off automatically, even if i try to flash the ROM again, the problem still occur... Until i do the factory reset, it's working normally again... Just give it a try ,well if you don't mind to lose your apps...
Click to expand...
Click to collapse
Well I install a fresh stock rom and it looks like the power button and the system got a little problem and I don't know why
The problem is like this now even the stock rom is flashed :
1.Stock rom flashed
2.Turning on the phone using switch power,the phone vibrate,and no Sony Ericsson word come up
3.The phone then have a notification sound (sounds like setting notification) even the phone screen is power off
4.I take out the battery,and then wait 30 seconds,and insert the battery
5.I plug in charger,the phone on with showing battery icon,I press the power button and the phone on
That's the problem...about the power button and boot up screen :'(
UchihaDareNial said:
Well I install a fresh stock rom and it looks like the power button and the system got a little problem and I don't know why
The problem is like this now even the stock rom is flashed :
1.Stock rom flashed
2.Turning on the phone using switch power,the phone vibrate,and no Sony Ericsson word come up
3.The phone then have a notification sound (sounds like setting notification) even the phone screen is power off
4.I take out the battery,and then wait 30 seconds,and insert the battery
5.I plug in charger,the phone on with showing battery icon,I press the power button and the phone on
That's the problem...about the power button and boot up screen :'(
Click to expand...
Click to collapse
if I understood, your phone boot but the display doesn't turn on.
since seems like this happen since turning the phone on. we can say that for some reason the screen isn't responding. so... you can try to reflash it again and see it that help in something.
the worst could be that the screen got damage in some way.
If i were you,I would reflash stock from via SEUS. And then see what happens. I only hope that it isn't a hardware issue
Sent from my U20i using xda premium
It sounds to me that your battery was just too low... You turned it off to conserve battery and then when you turned it on it gave you a notification sound...
it does that when it wants to turn off because of low battery...
just let it charge, i don't think it's much of a problem.
Well I flashed a stock Rom and the problem still occur...accelerometer doesn't work and phone display isn't on when boot (but the phone is on,yeah it is on just display have no light)
Sent from my SK17a using xda premium
I have two problems in my Samsung Galaxy S3
1- When I open the lock there is a transition of black lines on the screen. The moment I open the lock few black lines appear on the screen for a second. It blinks and then it is back to normal. But when I switch off the power saving mode it doesn't. This problem just starred to appear as there was no such problem before.
2- My battery drains on idle. I charge my phone and within 3 hours it seems to go down to 87 % without any use. The cell standby is what is eating the battery. It takes about 70% of power in cell stand by. I have read on many forums about the it but i don't want to flash my phone to solve that problem.
Please help me to solve my problems.
One backup data and factory reset .
Two check for updates via KIES .
Three Wifi settings turn off always on .
Fails then as you don't want to flash the next step is a service centre .
jje
skhan33 said:
I have two problems in my Samsung Galaxy S3
1- When I open the lock there is a transition of black lines on the screen. The moment I open the lock few black lines appear on the screen for a second. It blinks and then it is back to normal. But when I switch off the power saving mode it doesn't. This problem just starred to appear as there was no such problem before.
2- My battery drains on idle. I charge my phone and within 3 hours it seems to go down to 87 % without any use. The cell standby is what is eating the battery. It takes about 70% of power in cell stand by. I have read on many forums about the it but i don't want to flash my phone to solve that problem.
Please help me to solve my problems.
Click to expand...
Click to collapse
Are you sure this is not the ripple bug? Is it a dark wallpaper? If so turn off the ripple.
JJEgan said:
One backup data and factory reset .
Two check for updates via KIES .
Three Wifi settings turn off always on .
Fails then as you don't want to flash the next step is a service centre .
jje
Click to expand...
Click to collapse
I tried them all doesnt work
Kangburra said:
Are you sure this is not the ripple bug? Is it a dark wallpaper? If so turn off the ripple.
Click to expand...
Click to collapse
I don't think it is a ripple bug and I have tried all wallpapers it appears in all of them whether it is a dark one or plain white
skhan33 said:
I don't think it is a ripple bug and I have tried all wallpapers it appears in all of them whether it is a dark one or plain white
Click to expand...
Click to collapse
but have you turned the ripple effect off to be sure?
skhan33 said:
I tried them all doesnt work
Click to expand...
Click to collapse
Fails then as you don't want to flash the next step is a service centre
jje
Kangburra said:
but have you turned the ripple effect off to be sure?
Click to expand...
Click to collapse
Yess I did it still appears
skhan33 said:
I have two problems in my Samsung Galaxy S3
1- When I open the lock there is a transition of black lines on the screen. The moment I open the lock few black lines appear on the screen for a second. It blinks and then it is back to normal. But when I switch off the power saving mode it doesn't. This problem just starred to appear as there was no such problem before.
2- My battery drains on idle. I charge my phone and within 3 hours it seems to go down to 87 % without any use. The cell standby is what is eating the battery. It takes about 70% of power in cell stand by. I have read on many forums about the it but i don't want to flash my phone to solve that problem.
Please help me to solve my problems.
Click to expand...
Click to collapse
Just about to write a new thread about this problem. I have the exactly same screen problem you are having. I notice the problem since 2nd week I bought the phone. Try factory reset, flash new firmware (from original firmware which I forgot the version > latest stock LH1 > leaked LI8 > LIB), re-flash LI8 once and of course with a full wipe every time I flash. But the same thing happens again. This is so annoying since I found the problem. Try a lot (ripple off, force GPU on, change wallpaper, screen mode, screen tone and everything about screen) still no solution yet.Have to visit Samsung Centre I guess
I think maybe others have this problem too just they didn't notice it. Try turn on power save mode (it doesn't matter you tick the options inside or not, I have try them all), locked or turn off your screen then turn it on. Stare still on the screen to see if you have the black line.
ctingwei said:
Just about to write a new thread about this problem. I have the exactly same screen problem you are having. I notice the problem since 2nd week I bought the phone. Try factory reset, flash new firmware (from original firmware which I forgot the version > latest stock LH1 > leaked LI8 > LIB), re-flash LI8 once and of course with a full wipe every time I flash. But the same thing happens again. This is so annoying since I found the problem. Try a lot (ripple off, force GPU on, change wallpaper, screen mode, screen tone and everything about screen) still no solution yet.Have to visit Samsung Centre I guess
I think maybe others have this problem too just they didn't notice it. Try turn on power save mode (it doesn't matter you tick the options inside or not, I have try them all), locked or turn off your screen then turn it on. Stare still on the screen to see if you have the black line.
Click to expand...
Click to collapse
I feel the same that I have to walk in to a samsung service centre. I don't understand how such big phones have these errors and I always have bad luck in terms of mobile phone. I always get a faulty piece or something with some problem or other.
I tried power saving mode and there is no blinking as I have mentioned above but why does it blink on power saving mode ??? My friend too have same phone but he doesn't have an such problem.
skhan33 said:
I feel the same that I have to walk in to a samsung service centre. I don't understand how such big phones have these errors and I always have bad luck in terms of mobile phone. I always get a faulty piece or something with some problem or other.
I tried power saving mode and there is no blinking as I have mentioned above but why does it blink on power saving mode ??? My friend too have same phone but he doesn't have an such problem.
Click to expand...
Click to collapse
Guess like we have no other choice but head to Samsung service centre
ctingwei said:
Guess like we have no other choice but head to Samsung service centre
Click to expand...
Click to collapse
Well finally I've found a thread that describes the same bug I'm having.
I confirm this bug. When power saver mode is ON, there's a flickering when you unlock the screen, black lines appear for a second and then disapper, like a screen refresh or something... but this problem is not there when power saver mode is OFF. Weird.. but I just turned it off. Have you guys found another solution?
GasparIPerez said:
Well finally I've found a thread that describes the same bug I'm having.
I confirm this bug. When power saver mode is ON, there's a flickering when you unlock the screen, black lines appear for a second and then disapper, like a screen refresh or something... but this problem is not there when power saver mode is OFF. Weird.. but I just turned it off. Have you guys found another solution?
Click to expand...
Click to collapse
Turning off the power saving mode is the only solution by now. And I also found the same problem happened when I use camera. It's quite hard to notice because it happens just right after you click the camera icon before the screen changes.
Sent from my GT-I9300 using Tapatalk 2
This could be a fix
Hi guys
Do you have whatsapp installed?
I had the phone for 5 days now and it ran perfectly for about 3 days.
I used the screen sticker that came with the phone for a while because i didn't have
a screen protector(still not). Then i started installing stuff and whatsapp was installed
then i noticed crappy black horizontal line flicker the screen. Today I had a friend over
and the phone when mad, it booted but then stopped responding, now here's the part where
the black flicker gets fixed. I restored the phone to its default settings and the black was gone
installed whatsapp and droidwall and the flicker came again, it's uninstalled now and the phone
works fine.
Turning off power saving mode didn't work for me, this did
Hi Guys,
my SGS6 Edge is not turning on, i have tried VolUp+Power , VolDown+Power also with home button nothing helps to turn on.
Do you have any idea
i have this problem too.
phones currently unresponsive, blue light flashing and none of the power/volume/whatever keys seem to be doing anything.
trying to let the battery drain and hope it boots back up once its switched off but cant find a way to reboot it at the moment.
Try to go into download mode...voldown+power+home...it never fails..once there you can cancel the download mode and the phone will (or at least should) boot normally...if it doesn't go into download mode as well..then...it's FUBAR
amirage said:
Try to go into download mode...voldown+power+home...it never fails..once there you can cancel the download mode and the phone will (or at least should) boot normally...if it doesn't go into download mode as well..then...it's FUBAR
Click to expand...
Click to collapse
none of the options worked, phone was completely unresponsive with just the LED blinking every now and again.
i found that disconnecting the battery worked perfectly and now my phone works again, it only needed a reboot.
Hi everyone, I'd like to ask you a question. I have a Mi Pad 4 and every time, after booting, the touch screen does not appear to respond immediately to the commands on the lock screen. I have to press the screen randomly to make it work. Once the touch starts, the tablet works perfectly.
Can you tell me if I'm the only one with this problem?
Thanks!
I do too. The screen would hang up when boot. I have to turn off the screen and on again for it to work.
And anyone have auto shutdown bug? Mine will auto shutdown when enter deep sleep and battery is below 15%, even when plugged in. Nothing happen above 15%.
Never_Sm1le said:
I do too. The screen would hang up when boot. I have to turn off the screen and on again for it to work.
And anyone have auto shutdown bug? Mine will auto shutdown when enter deep sleep and battery is below 15%, even when plugged in. Nothing happen above 15%.
Click to expand...
Click to collapse
Fortunately I'm not the only one with this problem/bug.
Regarding the DeepSleep and the shutdown I have never try to verify it. Usually when the tablet is 30% I recharge it.
I'll try to test that.
Currently I have the HavocOS 2.8 ROM and I don't know if the deepsleep is set in the same way. But ill will try and I let u Know.
If someone else has our problems please reply this thread.
Yes after boot I have to pick up the tablet and move to unlock the screen faster.
Maybe its a feature?
It appears in TWRP too
paul-planlos said:
Yes after boot I have to pick up the tablet and move to unlock the screen faster.
Maybe its a feature?
It appears in TWRP too
Click to expand...
Click to collapse
I don't know, I thought it was just my problem, but apparently I'm not the only one. Even with TWRP and custom rom happens