Hi there, I desperately need a sim holder with the flex cable, I changed the touch screen and it seems I managed to break the flex cable from the sim holder. I'm interested in offers is somebody has a broken Cruise for spare parts or if you have an ideea which company has spare parts on stock, especially in eastern Europe. Thanx...
Did you find where to buy??
I need one too :-(
Here can you buy the SIM holder
Hello,
I bought the sim holder at ebay.
I installed it and it works perfectly
The shipping takes about a week, if you pay with paypal.
here is the link :
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=300275935897
Related
i have an xda for sale the screen is ok but used, the only problem is the mother board where it connects to the screen it is damaged, i also have the docking station and a car adaptor the case has dents as it has been my work phone for 2 years. now upgraded. £40 will get it all including postage in uk.
neil
Hi
I would like to know what memory resides in that xda?
And if is possible you to sell it to portugal????
Thanks in advance 8)
its an early model (wallaby) been used it has scratches on the case, but served me well untill i played with it after buying my new one, hense the damade to the connection on the mother board to the screen.
i hope this helps. yes will send i want £20 plus postage. it also has origional cradle, head phones and car charger.
I want to buy your xda
If you are interested, contact me!.
Anyone know where I can get replacement parts? I have a PDA2K and the two screws on the sides near the top are both gone. This has caused the plastic sides/slider to break. All of the hardware functions but the casing/housing of the base unit is now broken. Ideas are very welcome!
Thanks,
-Robert
Local to you in the US PPCTechs carry used sx66 parts:
http://www.pocketpctechs.com/main~u...rea~repairs-Parts+Only~item~XDA-TCOV03-02.htm
but for a used face, used slide plus screws they want $90 and the don't have the backs
or if you don't mind champagne gold I have brand new orange branded m2000 casings:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140018269984
For £24.99 GBP plus postage ( about $60 all in ) and I'll send some screws for free
Richard
Hello, I have a Qtek 9100 and unfortunately I dropped it and scratched the front of the casing up pretty bad. The phone is still in perfect condition and not even a scratch on the back or the screen. I am looking for the front housing. I do not have any scratches on the rear housing, keyboard, or even the battery cover. I have looked on Ebay and the only thing that I have found is for around $100 (US). I do not want to pay that much for something that I can conceivably drop again. So my question is; is there anyone out there that knows where I can get a front housing? I would even buy the total housing to use as a backup but I do not want to spend an arm and a leg for it. I would greatly appreciate any feedback anyone has.
First of all: PLEASE do NOT cross post your question in all (Wizard) forums. One should be enough.
The best way to get spare parts is HTC itself. I bought a battery-cover from htc-europe at a reasonable GBP 10 (or was it $ 10?). Just send them a message via the contact optio n on their website
Get a dummy device
Hi,
Purchase a dummy device from ebay. All the external parts are identical to the ones originally installed.
Regards.
Íñigo
Have you replaced the housing of an actual phone with the housing of a dummy phone. I would just like to be clear before i go out and buy one.
I suggested the same thing over at HoFo and someone replied that they are different. If it were me I'd drop in to a Tmo store to verify though.
Edsub: That's a good response and info. Thanks for the post.
found this site when i was looking for the entire facia for the 8125... they do have alot of other phone types listed too. the 8125 facia runs about $79.
Actually the dummy phones are all one solid piece of plastic, so unless you're going to try to cut the front piece off and superglue it, that won't work at all.
edsub said:
First of all: PLEASE do NOT cross post your question in all (Wizard) forums. One should be enough.
The best way to get spare parts is HTC itself. I bought a battery-cover from htc-europe at a reasonable GBP 10 (or was it $ 10?). Just send them a message via the contact optio n on their website
Click to expand...
Click to collapse
I called brightpoint in Germany for two battery covers.
They did send it by UPS without charging me anything.
If someone is interested in the phone number or email, just pm me
go to the htc web site. They have a phone number for ordering parts. I needed a batter door, and they sold me one for 12.00 plus 7.95 shipping. I had it in 4 days.
Eric
The little flap that covers the USB port has a small rubber gasket that tends to fall off. Has anyone found a cheap source or easy way to repair this? I'm thinking liquid rubber via a syringe or similar. I bought several off Ebay but they were expensive and don't last more than 6 months. I'm on like my 4th one.
Depends on what you think cheap is.
Supposedly this is OEM: http://www.etradesupply.com/sony-xperia-z-ultra-xl39h-card-slot-cover-and-usb-cover.html
I have same problem, my first falloff and now i use ducktape coz i cant buy that in my country
I have replaced it with this
OEM Micro USB Charge Port Cover White For Sony Xperia Z Ultra C6833 C6843 XL39H...
http://www.ebay.com/itm/191429193701
You can try sticking it with glue if you catch it falling soon. The above flap is very easy to put back and NO DISASSEMBLY is needed.
joust got one i ordered from amazon, great quality!
I had the same issue while in Mexico, called the Sony service center and they mailed me out 2 of them for FREE. My suggestion is that you call your local Sony Mobile service center and see what they tell you. I wasn't asked for warranty or proof of purchase, NADA!
FoneJoy has the USB cover for the Ultra. I bought one myself from them when the rubber fell off mine. They ship worldwide (from the UK).
http://www.fonejoy.com/genuine-sony...xperia-z-ultra-black-usb-cover-1271-0930.html
very useful thread, how complicated is the assembly once I have that original spare? couldn't find any pointers or how-to's. Thanks everyone.
Hey guys,
I recently broke my Z2's flap which is covering the SIM card and USB hole.
I was wondering if there's any differences between the flaps if I order from ebay?
I looked up the search queries with "xperia z2 port cover original" the cheapest was around 6$. Is this the sure thing to get?
I want it to seem as original as possible..
Also I broke my tempered glass + the shell case, need to order those too xD But I can manage finding those.
Looking for replies :good:
Well my sim card flap broke
I ordered one from aliexpress and it seems to be perfect
The replacement flap is composed of slightly more plastic but you wouldn't notice this difference even if you held them both in your hands (without close inspection). EBay replacement will be fine. Don't pay extra for the 'genuine' version that's higher priced than the rest because it'll be the same thing.
Thanks guys. Ordered the cheapest one from ebay.. We'll see how well that works out.